Engineering Structures - Juni 2020

Erschienen:	Juni 2020

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Wu, H. / Liew, A. / Van Mele, T. / Block, P.	Analysis and optimisation of a rib-stiffened vaulted floor for dynamic performance	110577
Abdelrahman, Khaled / El-Hacha, Raafat	Analytical prediction model for circular SMA-confined reinforced concrete columns	110547
Palmisano, Fabrizio / Greco, Rita / Biasi, Marika / Tondolo, Francesco / Cairns, John	Anchorage and laps of plain surface bars in R.C. structures	110603
Anbarasu, M. / Dar, M. Adil	Axial capacity of CFS built-up columns comprising of lipped channels with spacers: Nonlinear response and design	110559
Galvis, Francisco A. / Smith-Pardo, J. Paul	Axial load biaxial moment interaction (PMM) diagrams for shallow foundations: Design aids, experimental verification, and examples	110582
Jiang, Jin / Peng, Z. Y. / Ye, Z. J. / Ye, M.	Behaviour of 690 MPa high strength steel built-up H-section columns under eccentric load scenarios	110550
Albrifkani, Sherwan / Wang, Yong C.	Behaviour of axially and rotationally restrained reinforced concrete beams in fire	110572
Iwasa, Takashi / Nishizawa, Shu / Sakai, Mitsugu	Buckling severity measurement of axially compressed cylindrical structures with periodic buckling pattern	110568
Lystad, Tor M. / Fenerci, Aksel / Øiseth, Ole	Buffeting response of long-span bridges considering uncertain turbulence parameters using the environmental contour method	110575
Buchanan, Craig / Zhao, Ou / Real, Esther / Gardner, Leroy	Cold-formed stainless steel CHS beam-columns – Testing, simulation and design	110270
Tang, Wenshui / Li, Shan / Lu, Yiyan / Li, Zhen	Combined effects of wetting–drying cycles and sustained load on the behaviour of FRP-strengthened RC beams	110570
Lee, C. K. / Khan, M. K. I. / Zhang, Y. X. / Rana, Mohammad M.	Compressive performance of ECC-concrete encased high strength steel composite columns	110567
Ahmed, Mizan / Liang, Qing Quan / Patel, Vipulkumar Ishvarbhai / Hadi, Muhammad N. S.	Computational simulation of eccentrically loaded circular thin-walled concrete-filled double steel tubular slender columns	110571
Saleh, Zein / Sheikh, M. Neaz / Remennikov, Alex / Basu, Abheek	Damage assessment of GFRP bar reinforced ultra-high-strength concrete beams under overloading impact conditions	110581
Kettler, Markus / Zauchner, Paul / Unterweger, Harald	Determination of wheel loads from runway cranes based on rail strain measurement	110546
Xiao, Shui-Jing / Xu, Long-He / Li, Zhong-Xian	Development and experimental verification of self-centering shear walls with disc spring devices	110622
Aloisio, Angelo / Pasca, Dag / Tomasi, Roberto / Fragiacomo, Massimo	Dynamic identification and model updating of an eight-storey CLT building	110593
Soltani, Hesam / Khaloo, Alireza / Sadraie, Hamid	Dynamic performance enhancement of RC slabs by steel fibers vs. externally bonded GFRP sheets under impact loading	110539
Zhang, Xun / Li, Xi / Liu, Rui / Hao, Chenxi / Cao, Zhiyang	Dynamic properties of a steel–UHPC composite deck with large U-ribs: Experimental measurement and numerical analysis	110569
Wu, Qiongyao / Wang, Huajie / Qian, Hongliang / Han, Kang / Fan, Feng	Effect of insufficient screwing depth of bolt on mechanical behavior of bolt-ball joint and stability of single-layer reticulated shell	110590
Lacey, Andrew William / Chen, Wensu / Hao, Hong / Bi, Kaiming	Effect of inter-module connection stiffness on structural response of a modular steel building subjected to wind and earthquake load	110628
Kłosowski, Paweł / Pestka, Anna / Krajewski, Marcin / Lubowiecka, Izabela	Experimental and computational study on mechanical behaviour of carpentry corner log joints	110515
Hosseini, Alireza Sadat / Bahaari, Mohammad Reza / Lesani, Mohammad	Experimental and parametric studies of SCFs in FRP strengthened tubular T-joints under axially loaded brace	110548
Lyu, C. H. / Gilbert, B. P. / Guan, H. / Underhill, I. D. / Gunalan, S. / Karampour, H. / Masaeli, M.	Experimental collapse response of post-and-beam mass timber frames under a quasi-static column removal scenario	110562
Sitler, Ben / Takeuchi, Toru / Matsui, Ryota / Terashima, Masao / Terazawa, Yuki	Experimental investigation of a multistage buckling-restrained brace	110482
Jiang, Zhengwen / Wan, Shui / Fang, Zhi / Song, Aiming	Experimental investigation of fatigue behavior for adhesively-bonded GFRP/steel joints	110580
Zhang, Ailin / Ye, Quanxi / Wang, Zongyi	Experimental investigation on behavior of re-centering energy dissipative brace	110606
Wang, Zhongxing / Wang, Yuanqing / Zhang, Ying / Wang, Zongyi / Ouyang, Yuanwen	Experimental investigation on the behaviour of aluminium alloy beam-to-column joints connected by swage-locking pins	110578
Gamerro, Julien / Bocquet, Jean François / Weinand, Yves	Experimental investigations on the load-carrying capacity of digitally produced wood-wood connections	110576
Cheng, Xuanhao / Zou, Zuyin / Zhu, Zhanyuan / Huang, Xiaozhou / Liang, Wei / Mo, You / Chen, Wei	Experimental study on a steel frame infill wall based on vertical partitioning technology	110565
Yan, Long B. / Han, Bing / Fan, Liang / Li, Xiao	Fatigue damage of PBH shear connector of steel-concrete composite structure	110540
Gao, Qingfei / Dong, Ziliang / Cui, Kemeng / Liu, Chenguang / Liu, Yang	Fatigue performance of profiled steel sheeting–concrete bridge decks subjected to vehicular loads	110558
Prakash, P. Ravi / Azenha, Miguel / Pereira, João M. / Lourenço, Paulo B.	Finite element based micro modelling of masonry walls subjected to fire exposure: Framework validation and structural implications	110545
McConnell, Jennifer / Radovic, Matija / Keller, Philipp	Holistic finite element analysis to evaluate influence of cross-frames in skewed steel I-girder bridges	110556
Genna, Francesco	Lateral thrust in all-steel buckling-restrained braces: Experimental and FEM results	110512
Luo, Pengjun / Asada, Hayato / Tanaka, Tsuyoshi	Limit analysis for partial-joint-penetration weld T-joints with arbitrary loading angles	110459
Shi, Benkai / Liu, Weiqing / Yang, Huifeng / Ling, Xiu	Long-term performance of timber-concrete composite systems with notch-screw connections	110585
Jiang, Liqiang / Jiang, Lizhong / Ye, Jihong / Zheng, Hong	Macroscopic modelling of steel frames equipped with bolt-connected reinforced concrete panel wall	110549
Chen, Zhiyong / Popovski, Marjan	Material-based models for post-tensioned shear wall system with energy dissipators	110543
Oladapo, Bankole I. / Muhammad, Musa A. / Adebiyi, Victor A. / Oluwole, Bowoto / Usman, Hazrat	Model hybrid magnetorheological damping prediction in machine tools	110621
Cao, Jixing / Xiong, Haibei / Wang, Jianze / Kang, Jiahua	Model updating for timber-framed construction using the full-scale test	110560
Jalilkhani, Maysam / Ghasemi, Seyed Hooman / Danesh, Masood	A multi-mode adaptive pushover analysis procedure for estimating the seismic demands of RC moment-resisting frames	110528
Xiao, Weifang / Andrae, Matthias / Gebbeken, Norbert	Numerical study of blast mitigation effect of innovative barriers using woven wire mesh	110574
Papavasileiou, Georgios S. / Charmpis, Dimos C. / Lagaros, Nikos D.	Optimized seismic retrofit of steel-concrete composite buildings	110573
Sebaibi, Nassim / Boutouil, Mohamed	Reducing energy consumption of prefabricated building elements and lowering the environmental impact of concrete	110594
Bernardo, L. F. A. / Filho, B. M. V. C. / Horowitz, B.	Refinement of the rotating-angle softened truss model with efficient solution procedure for RC membranes	110552
De Biagi, Valerio / Marchelli, Maddalena / Peila, Daniele	Reliability analysis and partial safety factors approach for rockfall protection structures	110553
Wang, Meng-fu / Luo, Dan / Hu, Zhang-qi	Seismic performance of steel-enhanced damping concrete core walls with concealed steel plate bracings	110564
El Kahi, Elio / Deck, Olivier / Khouri, Michel / Mehdizadeh, Rasool / Rahme, Pierre	Simplified probabilistic evaluation of the variability of soil-structure interaction parameters on the elastic transmission of ground movements	110554
Feng, Fei-Fan / Hwang, Hyeon-Jong / Yi, Wei-Jian	Static and dynamic loading tests for precast concrete moment frames under progressive collapse	110612
Massaro, Francesco Mirko / Malo, Kjell Arne	Stress-laminated timber decks in bridges: Friction between lamellas, butt joints and pre-stressing system	110592
Mercuri, Valentina / Balduzzi, Giuseppe / Asprone, Domenico / Auricchio, Ferdinando	Structural analysis of non-prismatic beams: Critical issues, accurate stress recovery, and analytical definition of the Finite Element (FE) stiffness matrix	110252
Ngeljaratan, Luna / Moustafa, Mohamed A.	Structural health monitoring and seismic response assessment of bridge structures using target-tracking digital image correlation	110551
Barbat, G. B. / Cervera, M. / Chiumenti, M. / Espinoza, E.	Structural size effect: Experimental, theoretical and accurate computational assessment	110555
Li, Mingchao / Si, Wen / Du, Shengli / Zhang, Mengxi / Ren, Qiubing / Shen, Yang	Thermal deformation coordination analysis of CC-RCC combined dam structure during construction and operation periods	110587
Li, Fangyi / Liu, Jie / Yan, Yufei / Rong, Jianhua / Yi, Jijun / Wen, Guilin	A time-variant reliability analysis method for non-linear limit-state functions with the mixture of random and interval variables	110588

Über diese
Datenseite
IssueID
36561
Veröffentlicht am:
31.03.2020
Geändert am:
09.05.2022

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Engineering Structures - Juni 2020

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Engineering Structures - Juni 2020

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.