Engineering Structures - Juni 2019

Erschienen:	Juni 2019

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Sapountzakis, Evangelos J. / Dikaros, Ioannis C.	Advanced 3-D beam element including warping and distortional effects for the analysis of spatial framed structures	147-164
Deng, E. / Yang, Weichao / Lei, Mingfeng / Zhu, Zhihui / Zhang, Pingping	Aerodynamic loads and traffic safety of high-speed trains when passing through two windproof facilities under crosswind: A comparative study	320-339
Gentile, Roberto / Pampanin, Stefano / Raffaele, Domenico / Uva, Giuseppina	Analytical seismic assessment of RC dual wall/frame systems using SLaMA: Proposal and validation	493-505
Illouli, S. / Sadaoui, A. / Khennane, A.	Application of the theory statically indeterminate structures of infinite degree to a cable-truss footbridge under lateral forces	665-676
Jin, Seung-Seop	Bayesian inference using generalized likelihood for non-traditional residuals	613-626
Du, Xianjie / Feng, Guorui / Zhang, Yujiang / Wang, Zehua / Guo, Yuxia / Qi, Tingye	Bearing mechanism and stability monitoring of cemented gangue-fly ash backfill column with stirrups in partial backfill engineering	603-612
Lim, C. W. / Reddy, J. N.	Built-up structural steel sections as seismic metamaterials for surface wave attenuation with low frequency wide bandgap in layered soil medium	440-451
Downey, Austin / Theisen, Connor / Murphy, Heather / Anastasi, Nicholas / Laflamme, Simon	Cam-based passive variable friction device for structural control	430-439
Guo, Xiangfeng / Dias, Daniel / Carvajal, Claudio / Peyras, Laurent / Breul, Pierre	A comparative study of different reliability methods for high dimensional stochastic problems related to earth dam stability analyses	591-602
Cheng, Xiaowei / Ji, Xiaodong / Henry, Richard S. / Xu, Mengchao	Coupled axial tension-flexure behavior of slender reinforced concrete walls	261-276
Basili, Michela / De Angelis, Maurizio / Pietrosanti, Daniele	Defective two adjacent single degree of freedom systems linked by spring-dashpot-inerter for vibration control	480-492
Jin, Ai-Yun / Pan, Jian-Wen / Wang, Jin-Ting / Zhang, Chong	Effect of foundation models on seismic response of arch dams	578-590
Gali, Sahith / Subramaniam, Kolluru V. L.	Efficiency of steel fibers in shear resistance of reinforced concrete beams without stirrups at different moment-to-shear ratios	249-260
Yau, J. D. / Martínez-Rodrigo, M. D. / Doménech, A.	An equivalent additional damping approach to assess vehicle-bridge interaction for train-induced vibration of short-span railway bridges	469-479
Tripathy, D. / Singhal, V.	Estimation of in-plane shear capacity of confined masonry walls with and without openings using strut-and-tie analysis	290-304
Caycedo Garcia, Maya Sian / Siqueira, Gustavo Henrique / Vieira Junior, Luiz Carlos Marcos / Vizotto, Isaias	Evaluation of structural capacity of triangular and hexagonal reinforced concrete free-form shells	519-537
Bovo, Marco / Buratti, Nicola	Evaluation of the variability contribution due to epistemic uncertainty on constitutive models in the definition of fragility curves of RC frames	700-716
Ferreño, Diego / Casado, José Antonio / Carrascal, Isidro Alfonso / Diego, Soraya / Ruiz, Estela / Saiz, María / Sainz-Aja, José Adolfo / Cimentada, Ana Isabel	Experimental and finite element fatigue assessment of the spring clip of the SKL-1 railway fastening system	553-563
Costa, Ricardo / Valdez, José / Oliveira, Sara / da Silva, Luís Simões / Bayo, Eduardo	Experimental behaviour of 3D end-plate beam-to-column bolted steel joints	277-289
Bokor, Boglárka / Sharma, Akanshu / Hofmann, Jan	Experimental investigations on concrete cone failure of rectangular and non-rectangular anchor groups	202-217
Daneshkhah, Ali Reza / Schlatter, Clark R. / Rusnak, Cameron R. / Menzemer, Craig C.	Fatigue behavior of reinforced welded hand-holes in aluminum light poles	60-68
Kruszewski, Dominic / Zaghi, Arash E. / Wille, Kay	Finite element study of headed shear studs embedded in ultra-high performance concrete	538-552
Yao, Ye / Quach, Wai-Meng / Young, Ben	Finite element-based method for residual stresses and plastic strains in cold-formed steel hollow sections	24-42
Naud, Nicolas / Sorelli, Luca / Salenikovich, Alexander / Cuerrier-Auclair, Samuel	Fostering GLULAM-UHPFRC composite structures for multi-storey buildings	406-417
Hassan, Emad M. / Mahmoud, Hussam	Full functionality and recovery assessment framework for a hospital subjected to a scenario earthquake event	165-177
Carrera, E. / Fiordilino, G. A. / Nagaraj, M. / Pagani, A. / Montemurro, M.	A global/local approach based on CUF for the accurate and efficient analysis of metallic and composite structures	188-201
Tazarv, Mostafa / Carnahan, Zachary / Wehbe, Nadim	Glulam timber bridges for local roads	11-23
Han, Qiang / Jia, Zhenlei / Xu, Kun / Zhou, Yulong / Du, Xiuli	Hysteretic behavior investigation of self-centering double-column rocking piers for seismic resilience	218-232
Yang, Cancan / Okumus, Pinar / Ren, Ruolong	A hysteretic model for self-centering precast concrete piers with varying shear-slip between segments	350-361
Heitz, T. / Giry, C. / Richard, B. / Ragueneau, F.	Identification of an equivalent viscous damping function depending on engineering demand parameters	637-649
Yan, Shen / Zhao, Xianzhong / Rasmussen, Kim J. R. / Zhang, Hao	Identification of critical members for progressive collapse analysis of single-layer latticed domes	111-120
Khokhar, Aamir / Chui, Ying Hei / Smith, Ian	Influence of between-joists bridging elements on static and dynamic response of wood joisted floors	362-368
Ayensa, Alberto / Oller, Eva / Beltrán, Beatriz / Ibarz, Elena / Mari, Antonio / Gracia, Luis	Influence of the flanges width and thickness on the shear strength of reinforced concrete beams with T-shaped cross section	506-518
Lupășteanu, Vlad / Soveja, Lucian / Lupășteanu, Radu / Chingălată, Costel	Installation of a base isolation system made of friction pendulum sliding isolators in a historic masonry orthodox church	369-381
Hashemi, M. Javad / Al-Attraqchi, Ali Y. / Kalfat, Robin / Al-Mahaidi, Riadh	Linking seismic resilience into sustainability assessment of limited-ductility RC buildings	121-136
Macedo, L. / Silva, A. / Castro, J. M.	A more rational selection of the behaviour factor for seismic design according to Eurocode 8	69-86
Mohammadi, Majid / Motovali Emami, Sayed Mohammad	Multi-bay and pinned connection steel infilled frames; an experimental and numerical study	43-59
Wang, Weinan / Gong, Jinxin	New relaxation function and age-adjusted effective modulus expressions for creep analysis of concrete structures	1-10
Moslemi, M. / Farzin, A. / Kianoush, M. R.	Nonlinear sloshing response of liquid-filled rectangular concrete tanks under seismic excitation	564-577
Tian, Li-min / Wei, Jian-Peng / Hao, Ji-Ping	Optimisation of long-span single-layer spatial grid structures to resist progressive collapse	394-405
Brandner, Reinhard / Ringhofer, Andreas / Reichinger, Tobias	Performance of axially-loaded self-tapping screws in hardwood: Properties and design	677-699
Strukar, Kristina / Kalman Šipoš, Tanja / Miličević, Ivana / Bušić, Robert	Potential use of rubber as aggregate in structural reinforced concrete element – A review	452-468
Samieian, Mohammad Amin / Cormie, David / Smith, David / Wholey, Will / Blackman, Bamber R. K. / Dear, John P. / Hooper, Paul A.	Prediction of blast response in laminated glass	650-664
Yang, David Y. / Frangopol, Dan M. / Teng, Jin-Guang	Probabilistic life-cycle optimization of durability-enhancing maintenance actions: Application to FRP strengthening planning	340-349
Gong, Fuyuan / Maekawa, Koichi	Proposal of poro-mechanical coupling among ASR, corrosion and frost action for damage assessment of structural concrete with water	418-429
Mendoza-Lugo, Miguel Angel / Delgado-Hernández, David Joaquín / Morales-Nápoles, Oswaldo	Reliability analysis of reinforced concrete vehicle bridges columns using non-parametric Bayesian networks	178-187
Halvonik, Jaroslav / Kalická, Jana / Majtánová, Lucia / Minárová, Mária	Reliability of models aimed at evaluating the punching resistance of flat slabs without transverse reinforcement	627-636
Xu, Li / Pan, Jinlong / Cai, Jingming	Seismic performance of precast RC and RC/ECC composite columns with grouted sleeve connections	104-110
Li, Tao / Marafi, Nasser A. / Sen, Andrew D. / Berman, Jeffrey W. / Eberhard, Marc O. / Lehman, Dawn E. / Roeder, Charles W.	Seismic performance of special concentrically braced frames in deep basins during subduction-zone earthquakes	87-103
Xiao, Xiang / Yan, Yu / Chen, Bo	Stochastic dynamic analysis for vehicle-track-bridge system based on probability density evolution method	745-761
Hassan, Ahmed / Khairallah, Fouad / Mamdouh, Hala / Kamal, Mahmoud	Structural behaviour of self-compacting concrete columns reinforced by steel and glass fibre-reinforced polymer rebars under eccentric loads	717-728
Zanini, Mariano Angelo	Structural reliability of bridges realized with reinforced concretes containing electric arc furnace slag aggregates	305-319
Madadi, Amirhossein / Tasdighi, Mahdi / Eskandari-Naddaf, Hamid	Structural response of ferrocement panels incorporating lightweight expanded clay and perlite aggregates: Experimental, theoretical and statistical analysis	382-393
Zhao, Bida / Liu, Chengqing / Wu, Handan / Ge, Yunhui / Yang, Jingjin / Yi, Qian	Study on out-of-plane flexural stiffness of unstiffened multi-planar CHS X-joints	137-146
López López, David / Roca, Pere / Liew, Andrew / Van Mele, Tom / Block, Philippe	Tile vaults as integrated formwork for reinforced concrete: Construction, experimental testing and a method for the design and analysis of two-dimensional structures	233-248
Yang, Weichao / Deng, E. / Lei, Mingfeng / Zhu, Zhihui / Zhang, Pingping	Transient aerodynamic performance of high-speed trains when passing through two windproof facilities under crosswinds: A comparative study	729-744

Über diese
Datenseite
IssueID
28286
Veröffentlicht am:
18.03.2019
Geändert am:
30.06.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Engineering Structures - Juni 2019

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Engineering Structures - Juni 2019

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.