Engineering Structures - Dezember 2017

Erschienen:	Dezember 2017

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Veuve, Nicolas / Sychterz, Ann C. / Smith, Ian F. C.	Adaptive control of a deployable tensegrity structure	14-23
Páez, Pablo M. / Sensale, Beradi	Analysis of guyed masts by the stability functions based on the Timoshenko beam-column	597-606
Sarvanis, Gregory C. / Karamanos, Spyros A.	Analytical model for the strain analysis of continuous buried pipelines in geohazard areas	57-69
Zhu, Li / Su, R. K. L.	Analytical solutions for composite beams with slip, shear-lag and time-dependent effects	559-578
Tahir, Zia ul Rehman / Mandal, Parthasarathi	Artificial neural network prediction of buckling load of thin cylindrical shells under axial compression	843-855
Lin, Hongwei / Zhao, Yuxi / Ožbolt, Jośko / Reinhardt, Hans-Wolf	Bond strength evaluation of corroded steel bars via the surface crack width induced by reinforcement corrosion	506-522
Sattar, Siamak / Liel, Abbie B.	Collapse indicators for existing nonductile concrete frame buildings with varying column and frame characteristics	188-201
Wang, Xing-er / Yang, Jian / Liu, Qing-feng / Zhang, Yang-mei / Zhao, Chenjun	A comparative study of numerical modelling techniques for the fracture of brittle materials with specific reference to glass	493-505
Xiong, Qingqing / Chen, Zhihua / Zhang, Wang / Du, Yansheng / Zhou, Ting / Kang, Jingfu	Compressive behaviour and design of L-shaped columns fabricated using concrete-filled steel tubes	758-770
Garrido, Hernán / Curadelli, Oscar / Ambrosini, Daniel	Control of relative vibration between flexible appendages using passive and semi-active isolation	819-831
Reis, André / Lopes, Nuno / Real, Paulo Vila	Design of steel plate girders subjected to shear buckling at ambient and elevated temperatures: Contribution from the flanges	437-451
Lansdell, Andrew / Song, Wei / Dixon, Brandon	Development and testing of a bridge weigh-in-motion method considering nonconstant vehicle speed	709-726
Lantsoght, Eva O. L. / van der Veen, Cor / Hordijk, Dick A. / de Boer, Ane	Development of recommendations for proof load testing of reinforced concrete slab bridges	202-210
Tohidi, Mosleh / Baniotopoulos, Charalampos	Effect of floor joint design on catenary actions of precast floor slab system	274-288
Shaheen, Mohamed A. / Tsavdaridis, Konstantinos Daniel / Salem, Emad	Effect of grout properties on shear strength of column base connections: FEA and analytical approach	307-319
Desnerck, Pieter / Lees, Janet M. / Morley, Chris T.	The effect of local reinforcing bar reductions and anchorage zone cracking on the load capacity of RC half-joints	865-877
Güllü, Hamza / Karabekmez, Murat	Effect of near-fault and far-fault earthquakes on a historical masonry mosque through 3D dynamic soil-structure interaction	465-492
Diaz, S. A. / Pujades, L. G. / Barbat, A. H. / Vargas, Y. F. / Hidalgo-Leiva, D. A.	Energy damage index based on capacity and response spectra	424-436
Heng, Piseth / Hjiaj, Mohammed / Battini, Jean-Marc / Limam, Ali	An enhanced SDOF model to predict the behaviour of a steel column impacted by a rigid body	771-789
Bedon, Chiara / Amadio, Claudio	Enhancement of the seismic performance of multi-storey buildings by means of dissipative glazing curtain walls	320-334
Virgin, Lawrence	Enhancing the teaching of structural dynamics using additive manufacturing	750-757
Cantero, Daniel / Hester, David / Brownjohn, James	Evolution of bridge frequencies and modes of vibration during truck passage	452-464
Lin, R. M. / Ng, T. Y.	Exact vibration modes of multiple-stepped beams with arbitrary steps and supports using elemental impedance method	24-34
Zhang, Jing / Shi, Xing Hua / Guedes Soares, C.	Experimental analysis of residual ultimate strength of stiffened panels with pitting corrosion under compression	70-86
Faleschini, Flora / Bragolusi, Paolo / Zanini, Mariano Angelo / Zampieri, Paolo / Pellegrino, Carlo	Experimental and numerical investigation on the cyclic behavior of RC beam column joints with EAF slag concrete	335-347
Li, Zhan / Chen, Li / Fang, Qin / Chen, Wensu / Hao, Hong / Zhang, Yadong	Experimental and numerical study of basalt fiber reinforced polymer strip strengthened autoclaved aerated concrete masonry walls under vented gas explosions	901-919
Huang, Wenjin / Lai, Zhichao / Chen, Baochun / Yao, Pengyu	Experimental behavior and analysis of prestressed concrete-filled steel tube (CFT) truss girders	607-618
Liu, Bin / Fan, Wei / Guo, Wei / Chen, Baisheng / Liu, Rong	Experimental investigation and improved FE modeling of axially-loaded circular RC columns under lateral impact loading	619-642
Xu, Shenchun / Wu, Chengqing / Liu, Zhongxian / Han, Kunpeng / Su, Yu / Zhao, Jian / Li, Jianchun	Experimental investigation of seismic behavior of ultra-high performance steel fiber reinforced concrete columns	129-148
Herrera, L. / Anacleto-Lupianez, S. / Lemnitzer, A.	Experimental performance of RC moment frame beams with rectangular openings	149-167
Milch, Jaromír / Tippner, Jan / Brabec, Martin / Sebera, Václav / Kunecký, Jiří / Kloiber, Michal / Hasníková, Hana	Experimental testing and theoretical prediction of traditional dowel-type connections in tension parallel to grain	180-187
Li, Hongmin / Lam, Frank / Qiu, Hongxing	Flexural performance of spliced beam connected and reinforced with self-tapping wood screws	523-534
Bessini, J. / Lázaro, C. / Monleón, S.	A form-finding method based on the geometrically exact rod model for bending-active structures	549-558
Huang, Le / Yu, Tao / Zhang, Shi-Shun / Wang, Zhen-Yu	FRP-confined concrete-encased cross-shaped steel columns: Concept and behaviour	348-358
Bayo, Eduardo / Loureiro, Alfonso / Lopez, Manuel / da Silva, Luís Simões	General component based cruciform finite elements to model 2D steel joints with beams of equal and different depths	698-708
Tong, Jing-Zhong / Guo, Yan-Lin	Global buckling prevention of end collared buckling-restrained braces: Theoretical, numerical analyses and design recommendations	289-306
Wilding, Bastian Valentin / Dolatshahi, Kiarash M. / Beyer, Katrin	Influence of load history on the force-displacement response of in-plane loaded unreinforced masonry walls	671-682
Gali, Sahith / Subramaniam, Kolluru V. L.	Investigation of the dilatant behavior of cracks in the shear response of steel fiber reinforced concrete beams	832-842
Kim, Jong-Chan / Choi, Kyoung-Kyu	Laminated element analysis to predict the shear strength of concrete beams under distributed and concentrated loads	45-56
Roy, Aparna / Bhattacharya, Gautam / Roy, Rana	Maximum credible damage of RC bridge pier under bi-directional seismic excitation for all incidence angles	251-273
Woods, J. E. / Lau, D. T. / Bao, X. / Li, W.	Measuring strain fields in FRP strengthened RC shear walls using a distributed fiber optic sensor	359-369
Hu, Kai / Zhou, Ying / Jiang, Li / Chen, Peng / Qu, Ge	A mechanical tension-resistant device for lead rubber bearings	238-250
Favvata, Maria J.	Minimum required separation gap for adjacent RC frames with potential inter-story seismic pounding	643-659
Toscano Corrêa, R. / Simões, F. M. F. / Pinto da Costa, A.	Moving loads on beams on Winkler foundations with passive frictional damping devices	211-225
Aghababaie Mobarake, A. / Khanmohammadi, M. / Mirghaderi, S. R.	A new discrete macro-element in an analytical platform for seismic assessment of unreinforced masonry buildings	381-396
Ding, Chao / Seifi, Hamed / Dong, Shilin / Xie, Yi Min	A new node-shifting method for shape optimization of reticulated spatial structures	727-735
Auad, Gaspar A. / Almazán, José L.	Non linear vertical-rocking isolation system: Application to legged wine storage tanks	790-803
Mehdi Mirzazadeh, M. / Green, Mark F.	Non-linear finite element analysis of reinforced concrete beams with temperature differentials	920-933
Bouras, Yanni / Vrcelj, Zora	Non-linear in-plane buckling of shallow concrete arches subjected to combined mechanical and thermal loading	413-423
Xiong, Zhe / Guo, Xiaonong / Luo, Yongfeng / Xu, Han	Numerical analysis of aluminium alloy gusset joints subjected to bending moment and axial force	1-13
Schoefs, Franck / Bastidas-Arteaga, Emilio / Tran, Trung-Viet	Optimal embedded sensor placement for spatial variability assessment of stationary random fields	35-44
Matharu, Navroop S. / Mottram, J. T.	Plain and threaded bearing strengths for the design of bolted connections with pultruded FRP material	878-887
Kitayama, Shoma / Lee, Donghun / Constantinou, Michael C. / Kempner, Leon	Probabilistic seismic assessment of seismically isolated electrical transformers considering vertical isolation and vertical ground motion	888-900
Brunesi, Emanuele / Parisi, Fulvio	Progressive collapse fragility models of European reinforced concrete framed buildings based on pushdown analysis	579-596
Kim, Taewan / LaFave, James M.	Proposed new equivalent lateral force design method for low-rise reinforced concrete wall-frame mixed building systems	87-101
Fang, Cheng / Yam, Michael C. H. / Lam, Angus C. C. / Ke, Ke	Reinforcing strategies for double-coped beams against local web buckling	736-749
Wang, L. / Su, R. K. L. / Cheng, B. / Li, L. Z. / Wan, L. / Shan, Z. W.	Seismic behavior of preloaded rectangular RC columns strengthened with precambered steel plates under high axial load ratios	683-697
Seo, Min-Seok / Kim, Hee-Seung / Truong, Gia Toai / Choi, Kyoung-Kyu	Seismic behaviors of thin slender structural walls reinforced with amorphous metallic fibers	102-115
Kang, Xin / Jiang, Lizhong / Bai, Yu / Caprani, Colin C.	Seismic damage evaluation of high-speed railway bridge components under different intensities of earthquake excitations	116-128
Aykac, Bengi / Özbek, Eray / Babayani, Rahim / Baran, Mehmet / Aykac, Sabahattin	Seismic strengthening of infill walls with perforated steel plates	168-179
Huang, Guoqing / Luo, Ying / Yang, Qingshan / Tian, Yuji	A semi-analytical formula for estimating peak wind load effects based on Hermite polynomial model	856-864
Mihaylov, Boyan I. / Franssen, Renaud	Shear-flexure interaction in the critical sections of short coupling beams	370-380
Cimellaro, Gian Paolo / Domaneschi, Marco	Stability analysis of different types of steel scaffolds	535-548
Harth, P. / Beda, P. / Michelberger, P.	Static analysis and reanalysis of quasi-symmetric structure with symmetry components of the symmetry groups C3v and C1v	397-412
Ghasemi, Seyed Hooman / Nowak, Andrzej S.	Target reliability for bridges with consideration of ultimate limit state	226-237
Fabrizio, Cristiano / Di Egidio, Angelo / de Leo, Andrea M.	Top disconnection versus base disconnection in structures subjected to harmonic base excitation	660-670
Yousefi, Amir M. / Lim, James B. P. / Clifton, G. Charles	Web bearing capacity of unlipped cold-formed ferritic stainless steel channels with perforated web subject to end-two-flange (ETF) loading	804-818

Über diese
Datenseite
IssueID
17970
Veröffentlicht am:
04.12.2018
Geändert am:
30.06.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Engineering Structures - Dezember 2017

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Engineering Structures - Dezember 2017

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.