Engineering Structures - v. 29, n. 10 (Oktober 2007)

Erschienen:	Oktober 2007

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Estekanchi, H. E. / Valamanesh, V. / Vafai, A.	Application of Endurance Time method in linear seismic analysis	2551-2562
Kim, Taewan / Foutch, Douglas A.	Application of FEMA methodology to RC shear wall buildings governed by flexure	2514-2522
Gomes, Fernando C. T. / Providência e Costa, Paulo M. / Rodrigues, João Paulo C. / Neves, Ildefonso C.	Buckling length of a steel column for fire design	2497-2502
Chen, Ju / Young, Ben	Cold-formed steel lipped channel columns at elevated temperatures	2445-2456
Ranzi, Gianluca / Bradford, Mark A.	Composite beams with both longitudinal and transverse partial interaction subjected to elevated temperatures	2737-2750
Tong, G. S. / Xing, G. R.	Determination of buckling mode for braced elastic–plastic frames	2487-2496
Pocanschi, A. / Phocas, M. C.	Earthquake isolator with progressive nonlinear deformability	2586-2592
Jacob, N. / Nurick, G. N. / Langdon, G. S.	The effect of stand-off distance on the failure of fully clamped circular mild steel plates subjected to blast loads	2723-2736
Lim, James B. P. / Young, Ben	Effects of elevated temperatures on bolted moment-connections between cold-formed steel members	2419-2427
Chen, Xinzhong / Zhou, Nan	Equivalent static wind loads on low-rise buildings based on full-scale pressure measurements	2563-2575
Perera, Ricardo / Ruiz, Antonio / Manzano, Carlos	An evolutionary multiobjective framework for structural damage localization and quantification	2540-2550
Mori, Takeshi / Lee, Hee-Hyun / Kyung, Kab-Soo	Fatigue life estimation parameter for short and medium span steel highway girder bridges	2762-2774
Jung, Sungmoon / Ghaboussi, Jamshid / Marulanda, Camilo	Field calibration of time-dependent behavior in segmental bridges using self-learning simulation	2692-2700
Esfahani, M. R. / Kianoush, M. R. / Tajari, A. R.	Flexural behaviour of reinforced concrete beams strengthened by CFRP sheets	2428-2444
Youssef, M. A. / Moftah, M.	General stress–strain relationship for concrete at elevated temperatures	2618-2634
Samyn, P. / Van Paepegem, W. / Leendertz, J. S. / Suister, E. / Van Schepdael, L. / Degrieck, J. / De Baets, P.	Global analysis and constructional aspects in the redesign of bearing elements for a movable storm surge barrier	2673-2691
Moon, Jiho / Yoon, Ki-Yong / Lee, Tae-Hyung / Lee, Hak-Eun	In-plane elastic buckling of pin-ended shallow parabolic arches	2611-2617
Mander, John B. / Dhakal, Rajesh P. / Mashiko, Naoto / Solberg, Kevin M.	Incremental dynamic analysis applied to seismic financial risk assessment of bridges	2662-2672
Rigato, Antonio B. / Medina, Ricardo A.	Influence of angle of incidence on seismic demands for inelastic single-storey structures subjected to bi-directional ground motions	2593-2601
Kim, Jaehong / LaFave, James M.	Key influence parameters for the joint shear behaviour of reinforced concrete (RC) beam–column connections	2523-2539
Aftabi Sani, Ahmad / Lotfi, Vahid	Linear dynamic analysis of arch dams utilizing modified efficient fluid hyper-element	2654-2661
El Naggar, M. H. / Youssef, M. A. / Ahmed, M.	Monotonic and cyclic lateral behaviour of helical pile specialized connectors	2635-2640
Zhang, Y. X. / Bradford, M. A.	Nonlinear analysis of moderately thick reinforced concrete slabs at elevated temperatures using a rectangular layered plate element with Timoshenko beam functions	2751-2761
Jangid, R. S.	Optimum lead–rubber isolation bearings for near-fault motions	2503-2513
Zhang, Xin / Wong, Kevin K. F. / Wang, Yi	Performance assessment of moment resisting frames during earthquakes based on the force analogy method	2792-2802
Yao, J. / Teng, J. G.	Plate end debonding in FRP-plated RC beams—I: Experiments	2457-2471
Teng, J. G. / Yao, J.	Plate end debonding in FRP-plated RC beams—II: Strength model	2472-2486
Yang, In Hwan	Prediction of time-dependent effects in concrete structures using early measurement data	2701-2710
Erramouspe, Josh / Kiousis, Panos D. / Christenson, Richard / Vincent, Tyrone	A resetting stiffness dynamic controller and its bench-scale implementation	2602-2610
Meftah, Sid Ahmed / Tounsi, Abdelouahed / El Abbas, Adda Bedia	A simplified approach for seismic calculation of a tall building braced by shear walls and thin-walled open section structures	2576-2585
Bailey, Colin G. / Toh, Wee Siang	Small-scale concrete slab tests at ambient and elevated temperatures	2775-2791
Kim, S. Y. / Yang, K. H. / Byun, H. Y. / Ashour, A. F.	Tests of reinforced concrete beams strengthened with wire rope units	2711-2722
Huang, Guoqing / Chen, Xinzhong	Wind load effects and equivalent static wind loads of tall buildings based on synchronous pressure measurements	2641-2653

Über diese
Datenseite
IssueID
17453
Veröffentlicht am:
06.12.2018
Geändert am:
06.12.2018

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Engineering Structures - v. 29, n. 10 (Oktober 2007)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Engineering Structures - v. 29, n. 10 (Oktober 2007)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.