Engineering Structures - Juli 2013

Erschienen:	Juli 2013

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Abbasnia, Reza / Tajik Davoudi, Alireza / Maddah, Mohammad M.	An adaptive pushover procedure based on effective modal mass combination rule	654-666
Shu, Jiangpeng / Zhang, Ziye / Gonzalez, Ignacio / Karoumi, Raid	The application of a damage detection method using Artificial Neural Network and train-induced vibrations on a simplified railway bridge model	408-421
Amadio, Claudio / Bedon, Chiara	A buckling verification approach for monolithic and laminated glass elements under combined in-plane compression and bending	220-229
Parunov, Joško / Ćorak, Maro / Gilja, Ivan	Calculated and prescribed stress concentration factors of ship side longitudinal connections	629-641
Smoljanović, Hrvoje / Živaljić, Nikolina / Nikolić, Željana	A combined finite-discrete element analysis of dry stone masonry structures	89-100
Zhang, Binsheng / Rasmussen, Birgit / Jorissen, Andre / Harte, Annette	Comparison of vibrational comfort assessment criteria for design of timber floors among the European countries	592-607
Liu, Yi / Manesh, Pouria	Concrete masonry infilled steel frames subjected to combined in-plane lateral and axial loading – An experimental study	331-339
Sousa, Helder / Bento, João / Figueiras, Joaquim	Construction assessment and long-term prediction of prestressed concrete bridges based on monitoring data	26-37
Richardson, James Norman / Adriaenssens, Sigrid / Filomeno Coelho, Rajan / Bouillard, Philippe	Coupled form-finding and grid optimization approach for single layer grid shells	230-239
Elshafey, Ahmed A. / Dawood, Nabil / Marzouk, H. / Haddara, M.	Crack width in concrete using artificial neural networks	676-686
Cotsovos, Demetrios M.	Cracking of RC beam/column joints: Implications for the analysis of frame-type structures	131-139
Quiroz, Luis G. / Maruyama, Yoshihisa / Zavala, Carlos	Cyclic behavior of thin RC Peruvian shear walls: Full-scale experimental investigation and numerical simulation	153-167
Zoubek, Blaž / Isakovic, Tatjana / Fahjan, Yasin / Fischinger, Matej	Cyclic failure analysis of the beam-to-column dowel connections in precast industrial buildings	179-191
Kim, Dongkeon / Dargush, Gary F. / Basaran, Cemal	A cyclic two-surface thermoplastic damage model with application to metallic plate dampers	608-620
Unal, Mehmet / Burak, Burcu	Development and analytical verification of an inelastic reinforced concrete joint model	284-294
Cui, Yao / Luo, Yunbiao / Nakashima, Masayoshi	Development of steel beam-to-column connections using SFRCC slabs	545-557
Ahmad, Javaid / Cheng, Shaohong	Effect of cross-link stiffness on the in-plane free vibration behaviour of a two-cable network	570-580
Lin, Jui-Liang / Tsai, Keh-Chyuan / Chuang, Ming-Chieh	Effective oscillators for the seismic analysis of inelastic one-way asymmetric-plan buildings	38-52
De Iuliis, M. / Faella, C.	Effectiveness analysis of a semiactive base isolation strategy using information from an early-warning network	518-535
De Corte, Wouter / Boel, Veerle	Effectiveness of spirally shaped stirrups in reinforced concrete beams	667-675
Wang, Qian / Fang, Hongbing / Li, Ning / Weggel, David C. / Wen, Guilin	An efficient FE model of slender members for crash analysis of cable barriers	240-256
Dou, Chao / Guo, Yan-Lin / Zhao, Si-Yuan / Pi, Yong-Lin / Bradford, Mark Andrew	Elastic out-of-plane buckling load of circular steel tubular truss arches incorporating shearing effects	697-706
El Aghoury, Ihab / Galal, Khaled	A fatigue stress-life damage accumulation model for variable amplitude fatigue loading based on virtual target life	621-628
Gao, W. Y. / Dai, Jian-Guo / Teng, J. G. / Chen, G. M.	Finite element modeling of reinforced concrete beams exposed to fire	488-501
Vasdravellis, George / Karavasilis, Theodore L. / Uy, Brian	Finite element models and cyclic behavior of self-centering steel post-tensioned connections with web hourglass pins	1-16
Santilli, A. / Puente, I. / Tanco, M.	Fresh concrete lateral pressure decay: Kinetics and factorial design to determine significant parameters	114-122
Celarec, D. / Dolšek, M.	The impact of modelling uncertainties on the seismic performance assessment of reinforced concrete frame buildings	340-354
Bartoli, Gianni / Betti, Michele / Giordano, Saverio	In situ static and dynamic investigations on the "Torre Grossa" masonry tower	718-733
Zhai, Chang-Hai / Wen, Wei-Ping / Zhu, Tian-Tian / Li, Shuang / Xie, Li-Li	Inelastic displacement ratios for design of structures with constant damage performance	53-63
Kumar, M. / Stafford, P. J. / Elghazouli, A. Y.	Influence of ground motion characteristics on drift demands in steel moment frames designed to Eurocode 8	502-517
Wang, Chao / Ren, Wei-Xin / Wang, Zuo-Cai / Zhu, Hong-Ping	Instantaneous frequency identification of time-varying structures by continuous wavelet transform	17-25
Lei, Ying / Wu, De-Tin / Lin, Shu-Zhi	Integration of decentralized structural control and the identification of unknown inputs for tall shear building models under unknown earthquake excitation	306-316
Correia, José A. F. O. / de Jesus, Abilio M. P. / Fernández-Canteli, Alfonso	Local unified probabilistic model for fatigue crack initiation and propagation: Application to a notched geometry	394-407
Yang, Meng-Gang / Li, Chun-Yang / Chen, Zheng-qing	A new simple non-linear hysteretic model for MR damper and verification of seismic response reduction experiment	434-445
Guezouli, Samy / Lachal, Alain / Nguyen, Quang-Huy	Numerical investigation of internal force transfer mechanism in push-out tests	140-152
Henriques, José / da Silva, Luís Simões / Valente, Isabel B.	Numerical modeling of composite beam to reinforced concrete wall joints	747-761
Henriques, José / da Silva, Luís Simões / Valente, Isabel B.	Numerical modeling of composite beam to reinforced concrete wall joints	734-746
Li, Jun / Hao, Hong	Numerical study of structural progressive collapse using substructure technique	101-113
Karampour, Hassan / Albermani, Faris / Gross, Julien	On lateral and upheaval buckling of subsea pipelines	317-330
Pérez Caldentey, Alejandro / Marchetto, Francesco / Corres Peiretti, Hugo / Iglesias Villareal, Jesús	Plate-anchored reinforcement bars: A new simple and physical model for practical applications	168-178
Bedirhanoglu, Idris / Ilki, Alper / Kumbasar, Nahit	Precast fiber reinforced cementitious composites for seismic retrofit of deficient rc joints – A pilot study	192-206
Mardfekri, Maryam / Gardoni, Paolo	Probabilistic demand models and fragility estimates for offshore wind turbine support structures	478-487
Koppitz, Robert / Kenel, Albin / Keller, Thomas	Punching shear of RC flat slabs – Review of analytical models for new and strengthening of existing slabs	123-130
Pant, Deepak R. / Constantinou, Michael C. / Wijeyewickrema, Anil C.	Re-evaluation of equivalent lateral force procedure for prediction of displacement demand in seismically isolated structures	455-465
Gao, R. P. / Wang, C. M. / Koh, C. G.	Reducing hydroelastic response of pontoon-type very large floating structures using flexible connector and gill cells	372-383
Ribeiro, S. E. C. / Diniz, S. M. C.	Reliability-based design recommendations for FRP-reinforced concrete beams	273-283
Zacharenaki, Athanasia E. / Fragiadakis, Michalis / Papadrakakis, Manolis	Reliability-based optimum seismic design of structures using simplified performance estimation methods	707-717
Martinelli, Enzo / Erduran, Emrah	Seismic Capacity Design of RC frames and environment-induced degradation of materials: Any concern?	466-477
Kumar, M. / Stafford, P. J. / Elghazouli, A. Y.	Seismic shear demands in multi-storey steel frames designed to Eurocode 8	69-87
Teh, Lip H. / Yazici, Veysel	Shear lag and eccentricity effects of bolted connections in cold-formed steel sections	536-544
Carrillo, Julian / Alcocer, Sergio M.	Simplified equation for estimating periods of vibration of concrete wall housing	446-454
Zhang, De-Yi / Li, Xi / Yan, Wei-Ming / Xie, Wei-Chau / Pandey, Mahesh D.	Stochastic seismic analysis of a concrete-filled steel tubular (CFST) arch bridge under tridirectional multiple excitations	355-371
Chaudhary, Muhammad Tariq A.	Structural condition assessment and functional appraisal of a large basement affected by groundwater leakage	384-393
Masi, Angelo / Santarsiero, Giuseppe / Lignola, Gian Piero / Verderame, Gerardo M.	Study of the seismic behavior of external RC beam–column joints through experimental tests and numerical simulations	207-219
Russo, Gaetano / Pauletta, Margherita / Cortesia, Andrea	A study on experimental shear behavior of fiber-reinforced elastomeric isolators with various fiber layouts, elastomers and aging conditions	422-433
Carbonell-Márquez, Juan Francisco / Jurado-Piña, Rafael / Gil-Martín, Luisa María / Hernández-Montes, Enrique	Symmetry preserving in Topological Mapping for tension structures	64-68
Milosevic, Jelena / Lopes, Mário / Gago, António Sousa / Bento, Rita	Testing and modeling the diagonal tension strength of rubble stone masonry panels	581-591
Joergensen, Henrik B. / Hoang, Linh C.	Tests and limit analysis of loop connections between precast concrete elements loaded in tension	558-569
Navarro-Gregori, Juan / Miguel, P. F. / Fernandez, M. A. / Martí-Vargas, José R.	A theoretical model for including the effect of monotonic shear loading in the analysis of reinforced concrete beams	257-272
Fragiacomo, M. / Lukaszewska, E.	Time-dependent behaviour of timber–concrete composite floors with prefabricated concrete slabs	687-696
Silva, J. E. / Garbatov, Y. / Guedes Soares, C.	Ultimate strength assessment of rectangular steel plates subjected to a random localised corrosion degradation	295-305
Seo, Junwon / Linzell, Daniel G.	Use of response surface metamodels to generate system level fragilities for existing curved steel bridges	642-653

Über diese
Datenseite
IssueID
17360
Veröffentlicht am:
06.12.2018
Geändert am:
30.06.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Engineering Structures - Juli 2013

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Engineering Structures - Juli 2013

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.