Energy and Buildings - Januar 2018

Erschienen:	Januar 2018

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Andersson, Martin / Barkander, Jonas / Kono, Jun / Ostermeyer, York	Abatement cost of embodied emissions of a residential building in Sweden	595-604
Vanhoudt, D. / Claessens, B. J. / Salenbien, R. / Desmedt, J.	An active control strategy for district heating networks and the effect of different thermal energy storage configurations	1317-1327
Yi, Zhi-Ming / Yu, Hang / Wei, Qi / Chu, Xiang-Yang	An advanced simulation test bed for the stability analysis of variable air volume air-conditioning control system. Part 1: Optimal simplified model of building envelope for room thermal performance prediction	950-963
Rasmussen, Freja Nygaard / Malmqvist, Tove / Moncaster, Alice / Houlihan Wiberg, Aoife / Birgisdóttir, Harpa	Analysing methodological choices in calculations of embodied energy and GHG emissions from buildings	1487-1498
Pandelidis, Demis / Anisimov, Sergey / Drąg, Paweł / Sidorczyk, Marek / Pacak, Anna	Analysis of application of the M-Cycle heat and mass exchanger to the typical air conditioning systems in Poland	873-883
Martinez, Andrea / Choi, Joon-Ho	Analysis of energy impacts of facade-inclusive retrofit strategies, compared to system-only retrofits using regression models	261-267
Heidari, Mahbod / Majcen, Daša / van der Lans, Nicoline / Floret, Idelette / Patel, Martin K.	Analysis of the energy efficiency potential of household lighting in Switzerland using a stock model	536-548
De Baets, Leen / Ruyssinck, Joeri / Develder, Chris / Dhaene, Tom / Deschrijver, Dirk	Appliance classification using VI trajectories and convolutional neural networks	32-36
Gupta, Rajat / Gregg, Matt	Assessing energy use and overheating risk in net zero energy dwellings in UK	897-905
Maykot, Jéssica Kuntz / Rupp, Ricardo Forgiarini / Ghisi, Enedir	Assessment of gender on requirements for thermal comfort in office buildings located in the Brazilian humid subtropical climate	1170-1183
Hurnik, Maria / Specjal, Aleksandra / Popiolek, Zbigniew / Kierat, Wojciech	Assessment of single-family house thermal renovation based on comprehensive on-site diagnostics	162-171
Vailati, C. / Bachtiar, E. / Hass, P. / Burgert, I. / Rüggeberg, M.	An autonomous shading system based on coupled wood bilayer elements	1013-1022
Allesina, G. / Mussatti, E. / Ferrari, F. / Muscio, A.	A calibration methodology for building dynamic models based on data collected through survey and billings	406-416
Yang, Yingying / Wu, Tingting Vogt / Sempey, Alain / Pradere, Christophe / Sommier, Alain / Batsale, Jean-Christophe	Combination of terahertz radiation method and thermal probe method for non-destructive thermal diagnosis of thick building walls	1328-1336
Holzmann, Angela / Schmid, Erwin	Consumer behaviour in the residential heating sector in Austria: Findings from a bottom-up modelling approach	486-493
Bonfigli, Roberto / Felicetti, Andrea / Principi, Emanuele / Fagiani, Marco / Squartini, Stefano / Piazza, Francesco	Denoising autoencoders for Non-Intrusive Load Monitoring: Improvements and comparative evaluation	1461-1474
Knowles, Hal S. / Hostetler, Mark E. / Liebovitch, Larry S.	Describing the dynamics, distributions, and multiscale relationships in the time evolution of residential building energy consumption	310-325
Carre, Andrew / Williamson, Terence	Design and validation of a low cost indoor environment quality data logger	1751-1761
Li, Jun / Thomas Ng, S. / Skitmore, Martin	Developing a decision aid for selecting low-carbon refurbishment solutions for multi-story residential buildings in subtropical cities	1724-1735
Jeong, Kwangbok / Hong, Taehoon / Kim, Jimin	Development of a CO2 emission benchmark for achieving the national CO2 emission reduction target by 2030	86-94
Lee, Heangwoo / Kim, Suktae / Seo, Janghoo	Development of a detachable window aircap module for energy saving	1640-1647
Liu, Jie / Chung, Dae-Hun / Chung, Mo / Im, Yong-Hoon	Development of load models and operation simulator for a building complex with mixtures of multi-type engines and renewable devices	831-847
Senff, L. / Ascensão, G. / Ferreira, V. M. / Seabra, M. P. / Labrincha, J. A.	Development of multifunctional plaster using nano-TiO2 and distinct particle size cellulose fibers	721-735
Busic-Sontic, Ante / Fuerst, Franz	Does your personality shape your reaction to your neighbours’ behaviour? A spatial study of the diffusion of solar panels	1275-1285
Jradi, M. / Veje, C. T. / Jørgensen, B. N.	A dynamic energy performance-driven approach for assessment of buildings energy Renovation—Danish case studies	62-76
Hu, Ming	Dynamic life cycle assessment integrating value choice and temporal factors—A case study of an elementary school	1087-1096
Karmann, Caroline / Bauman, Fred / Raftery, Paul / Schiavon, Stefano / Koupriyanov, Mike	Effect of acoustical clouds coverage and air movement on radiant chilled ceiling cooling capacity	939-949
Nath, Pradip / Sarker, Prabir K. / Biswas, Wahidul K.	Effect of fly ash on the service life, carbon footprint and embodied energy of high strength concrete in the marine environment	1694-1702
Wang, Yingying / Jiang, Chao / Liu, Yanfeng / Wang, Dengjia / Liu, Jiaping	The effect of heat and moisture coupling migration of ground structure without damp-proof course on the indoor floor surface temperature and humidity: Experimental study	580-594
Katoh, Yasuo / Katsurayama, Hiroshi / Koganei, Makoto / Mizunuma, Makoto	Effects of convection heat transfer on Sunagoke moss green roof: A laboratory study	1417-1428
Cattarin, G. / Pagliano, L. / Causone, F. / Kindinis, A.	Empirical and comparative validation of an original model to simulate the thermal behaviour of outdoor test cells	1711-1723
Elharidi, Aly M. / Tuohy, Paul G. / Teamah, Mohamed A.	The energy and indoor environmental performance of Egyptian offices: Parameter analysis and future policy	431-452
Jang, Hyunju / Kang, Jian	An energy model of high-rise apartment buildings integrating variation in energy consumption between individual units	656-667
Jung, Nusrat / Paiho, Satu / Shemeikka, Jari / Lahdelma, Risto / Airaksinen, Miimu	Energy performance analysis of an office building in three climate zones	1023-1035
Ali, Muhammad Tauha / Sarfraz, Omer / Armstrong, Peter R.	Energy performance of GCC-specification LCC optimized dedicated outdoor air system configurations coupled to an air-cooled outdoor unit	417-430
Chan, Ka Chung / Tso, Chi Yan / Wu, Chili / Chao, Christopher Y. H.	Enhancing the performance of a zeolite 13X/CaCl2–water adsorption cooling system by improving adsorber design and operation sequence	1368-1378
Chen, Jianli / Augenbroe, Godfried / Song, Xinyi	Evaluating the potential of hybrid ventilation for small to medium sized office buildings with different intelligent controls and uncertainties in US climates	1648-1661
Raftery, Paul / Li, Shuyang / Jin, Baihong / Ting, Min / Paliaga, Gwelen / Cheng, Hwakong	Evaluation of a cost-responsive supply air temperature reset strategy in an office building	356-370
Berlanga, F. A. / Ruiz de Adana, M. / Olmedo, I. / Villafruela, J. M. / San José, J. F. / Castro, F.	Experimental evaluation of thermal comfort, ventilation performance indices and exposure to airborne contaminant in an airborne infection isolation room equipped with a displacement air distribution system	209-221
Kim, Janghyun / Tzempelikos, Athanasios / Horton, W.Travis / Braun, James E.	Experimental investigation and data-driven regression models for performance characterization of single and multiple passive chilled beam systems	1736-1750
Ghani, Saud / Gamaledin, Seifelislam Mahmoud Ahmad / Rashwan, Mohammed Mohammed / Atieh, Muataz Ali	Experimental investigation of double-pipe heat exchangers in air conditioning applications	801-811
Liu, Changyu / Wu, Yangyang / Zhu, Yongjian / Li, Dong / Ma, Lingyong	Experimental investigation of optical and thermal performance of a PCM-glazed unit for building applications	794-800
Fang, Zhaosong / Liu, Hong / Li, Baizhan / Tan, Meilan / Olaide, Oladokun Majeed	Experimental investigation on thermal comfort model between local thermal sensation and overall thermal sensation	1286-1295
Zeng, Zhaotian / Zhao, Yanlin / Lu, Haibo / Wei, Changfu	Experimental performance study of ground-coupled heat pump system for cooling and heating provision in karst region	971-986
Zhang, Lun / Liu, Xiaohua / Wei, Hongyang / Zhang, Xiaosong	Experimental study and analysis of heat and mass transfer ability of counter-flow packing tower and liquid desiccant dehumidification system	150-161
Dong, Jiankai / Zhang, Long / Deng, Shiming / Yang, Bin / Huang, Shun	An experimental study on a novel radiant-convective heating system based on air source heat pump	812-821
Hernández-Pérez, I. / Xamán, J. / Macias-Melo, E. V. / Aguilar-Castro, K. M. / Zavala-Guillén, I. / Hernández-López, I. / Simá, E.	Experimental thermal evaluation of building roofs with conventional and reflective coatings	569-579
Song, Yulong / Ye, Zuliang / Wang, Yikai / Cao, Feng	The experimental verification on the optimal discharge pressure in a subcooler-based transcritical CO2 system for space heating	1442-1449
Rupp, Ricardo Forgiarini / de Dear, Richard / Ghisi, Enedir	Field study of mixed-mode office buildings in Southern Brazil using an adaptive thermal comfort framework	1475-1486
Wang, Zi / Yu, Hang / Jiao, Yu / Wei, Qi / Chu, Xiangyang	A field study of thermal sensation and neutrality in free-running aged-care homes in Shanghai	1523-1532
Lee, Je Hyeon / Im, Piljae / Song, Young-hak	Field test and simulation evaluation of variable refrigerant flow systems performance	1161-1169
Youssef, Amr M. A. / Zhai, Zhiqiang (John) / Reffat, Rabee M.	Generating proper building envelopes for photovoltaics integration with shape grammar theory	326-341
Pili, Stefano / Desogus, Giuseppe / Melis, Davide	A GIS tool for the calculation of solar irradiation on buildings at the urban scale, based on Italian standards	629-646
Touzani, Samir / Granderson, Jessica / Fernandes, Samuel	Gradient boosting machine for modeling the energy consumption of commercial buildings	1533-1543
Hatvani-Kovacs, Gertrud / Belusko, Martin / Pockett, John / Boland, John	Heat stress-resistant building design in the Australian context	290-299
Prata, Joana / Simões, Nuno / Tadeu, António	Heat transfer measurements of a linear thermal bridge in a wooden building corner	194-208
He, Yingdong / Wang, Xiang / Li, Nianping / He, Meiling / He, De	Heating chair assisted by leg-warmer: A potential way to achieve better thermal comfort and greater energy conservation in winter	1106-1116
Zhao, Yajing / Min, Xin / Huang, Zhaohui / Liu, Yan'gai / Wu, Xiaowen / Fang, Minghao	Honeycomb-like structured biological porous carbon encapsulating PEG: A shape-stable phase change material with enhanced thermal conductivity for thermal energy storage	1049-1062
Caskey, Stephen L. / Groll, Eckhard A.	Hybrid air-hydronic HVAC performance in a residential net-zero energy retrofit	342-355
Nocentini, Kévin / Achard, Patrick / Biwole, Pascal / Stipetic, Marina	Hygro-thermal properties of silica aerogel blankets dried using microwave heating for building thermal insulation	14-22
Nosrati, Roya Hamideh / Berardi, Umberto	Hygrothermal characteristics of aerogel-enhanced insulating materials under different humidity and temperature conditions	698-711
Strasser, H. / Kimman, J. / Koch, A. / Mair am Tinkhof, O. / Müller, D. / Schiefelbein, J. / Slotterback, C.	IEA EBC annex 63–implementation of energy strategies in communities	123-134
Hong, Tianzhen	IEA EBC annexes advance technologies and strategies to reduce energy use and GHG emissions in buildings and communities	147-149
Kupczak, Arkadiusz / Sadłowska-Sałęga, Agnieszka / Krzemień, Leszek / Sobczyk, Joanna / Radon, Jan / Kozłowski, Roman	Impact of paper and wooden collections on humidity stability and energy consumption in museums and libraries	77-85
Killian, M. / Kozek, M.	Implementation of cooperative Fuzzy model predictive control for an energy-efficient office building	1404-1416
Guen, Morgane Le / Mosca, Lucas / Perera, A. T. D. / Coccolo, Silvia / Mohajeri, Nahid / Scartezzini, Jean-Louis	Improving the energy sustainability of a Swiss village through building renovation and renewable energy integration	906-923
Tunzi, Michele / Boukhanouf, Rabah / Li, Hongwei / Svendsen, Svend / Ianakiev, Anton	Improving thermal performance of an existing UK district heat network: A case for temperature optimization	1576-1585
Vaništa Lazarević, Eva / Keković, Zoran / Antonić, Branislav	In search of the principles of resilient urban design: Implementability of the principles in the case of the cities in Serbia	1130-1138
Zhu, Li / Shao, Zebiao / Sun, Yong / Soebarto, Veronica / Gao, Feng / Zillante, George / Zuo, Jian	Indoor daylight distribution in a room with integrated dynamic solar concentrating facade	1-13
Karakounos, I. / Dimoudi, A. / Zoras, S.	The influence of bioclimatic urban redevelopment on outdoor thermal comfort	1266-1274
Cuny, Mathias / Lin, Jian / Siroux, Monica / Magnenet, Vincent / Fond, Christophe	Influence of coating soil types on the energy of earth-air heat exchanger	1000-1012
Yun, Geun Young	Influences of perceived control on thermal comfort and energy use in buildings	822-830
Eon, Christine / Liu, Xin / Morrison, Gregory M. / Byrne, Joshua	Influencing energy and water use within a home system of practice	848-860
Yan, Huaxia / Xia, Yudong / Xu, Xiangguo / Deng, Shiming	Inherent operational characteristics aided fuzzy logic controller for a variable speed direct expansion air conditioning system for simultaneous indoor air temperature and humidity control	558-568
Cuzminschi, M. / Gherasim, R. / Girleanu, V. / Zubarev, A. / Stamatin, I.	Innovative thermo-solar air heater	964-970
Zakriya, G.Mohamed / Ramakrishnan, G.	Insulation and mechanical properties of jute and hollow conjugated polyester reinforced nonwoven composite	1544-1552
Šimko, Martin / Krajčík, Michal / Šikula, Ondřej / Šimko, Peter / Kalús, Daniel	Insulation panels for active control of heat transfer in walls operated as space heating or as a thermal barrier: Numerical simulations and experiments	135-146
Seon Park, Hyo / Hwang, Jin Woo / Oh, Byung Kwan	Integrated analysis model for assessing CO2 emissions, seismic performance, and costs of buildings through performance-based optimal seismic design with sustainability	761-775
Shadram, Farshid / Mukkavaara, Jani	An integrated BIM-based framework for the optimization of the trade-off between embodied and operational energy	1189-1205
Liu, Linn / Rohdin, Patrik / Moshfegh, Bahram	Investigating cost-optimal refurbishment strategies for the medieval district of Visby in Sweden	750-760
Jia, Xin / Duanmu, Lin / Shu, Haiwen	Large-area seepage and heat transfer model of beach well infiltration intake system for seawater source heat pump	1593-1601
Soler, David / Salandin, Andrea / Micó, Joan C.	Lowest thermal transmittance of an external wall under budget, material and thickness restrictions: An integer linear programming approach	222-233
Hu, Min / Chen, Huanxin / Shen, Limei / Li, Guannan / Guo, Yabin / Li, Haorong / Li, Jiong / Hu, Wenju	A machine learning bayesian network for refrigerant charge faults of variable refrigerant flow air conditioning system	668-676
Borgstein, E. H. / Lamberts, R. / Hensen, J. L. M.	Mapping failures in energy and environmental performance of buildings	476-485
Iommi, Matteo	The mediterranean smart adaptive wall. An experimental design of a smart and adaptive facade module for the mediterranean climate	1450-1460
Bode, Gerrit / Fütterer, Johannes / Müller, Dirk	Mode and storage load based control of a complex building system with a geothermal field	1337-1345
Kim, Dongsu / Cox, Sam J. / Cho, Heejin / Im, Piljae	Model calibration of a variable refrigerant flow system with a dedicated outdoor air system: A case study	884-896
Li, Baizhan / Du, Chenqiu / Tan, Meilan / Liu, Hong / Essah, Emmanuel / Yao, Runming	A modified method of evaluating the impact of air humidity on human acceptable air temperatures in hot-humid environments	393-405
Boerenfijn, P. / Kazak, J. K. / Schellen, L. / van Hoof, J.	A multi-case study of innovations in energy performance of social housing for older adults in the Netherlands	1762-1769
Wu, Weidong / Guo, Juanli / Li, Jiwei / Hou, Huanyu / Meng, Qi / Wang, Weidong	A multi-objective optimization design method in zero energy building study: A case study concerning small mass buildings in cold district of China	1613-1624
Fong, K. F. / Lee, C. K.	New perspectives in solid desiccant cooling for hot and humid regions	1152-1160
Masood, Mustafa K. / Jiang, Chaoyang / Soh, Yeng Chai	A novel feature selection framework with Hybrid Feature-Scaled Extreme Learning Machine (HFS-ELM) for indoor occupancy estimation	1139-1151
Huang, Guangqin / Yang, Xiaofeng / Liu, Yajiao / Zhuang, Chunlong / Zhang, Hongyu / Lu, Jun	A novel truncated cone helix energy pile: Modelling and investigations of thermal performance	1241-1256
Yau, Y. H. / Poh, K. S. / Badarudin, A.	A numerical airflow pattern study of a floor swirl diffuser for UFAD system	525-535
Cao, Xiaoling / Yuan, Yanping / Xiang, Bo / Sun, Liangliang / Xingxing, Zhang	Numerical investigation on optimal number of longitudinal fins in horizontal annular phase change unit at different wall temperatures	384-392
Manzan, Marco / Zandegiacomo de Zorzi, Ezio / Lorenzi, Walter	Numerical simulation and sensitivity analysis of a steel framed internal insulation system	1703-1710
Guattari, Claudia / Evangelisti, Luca / Balaras, Constantinos A.	On the assessment of urban heat island phenomenon and its effects on building energy performance: A case study of Rome (Italy)	605-615
Cucumo, Mario / Ferraro, Vittorio / Kaliakatsos, Dimitrios / Mele, Marilena	On the distortion of thermal flux and of surface temperature induced by heat flux sensors positioned on the inner surface of buildings	677-683
Li, Hong / Sun, Yue	Operational performance study on a photovoltaic loop heat pipe/solar assisted heat pump water heating system	861-872
Huang, Pei / Huang, Gongsheng / Augenbroe, Godfried / Li, Shan	Optimal configuration of multiple-chiller plants under cooling load uncertainty for different climate effects and building types	684-697
Yoganathan, Duwaraka / Kondepudi, Sekhar / Kalluri, Balaji / Manthapuri, Sumanth	Optimal sensor placement strategy for office buildings using clustering algorithms	1206-1225
Anting, Nickholas / Din, Mohd Fadhil Md / Iwao, Kenzo / Ponraj, Mohanadoss / Siang, Alvin John Lim Meng / Yong, Lee Yee / Prasetijo, Joewono	Optimizing of near infrared region reflectance of mix-waste tile aggregate as coating material for cool pavement with surface temperature measurement	172-180
Bai, Hongyu / Zhu, Jie / Chen, Ziwei / Chu, Junze	Parametric analysis of a cross-flow membrane-based parallel-plate liquid desiccant dehumidification system: Numerical and experimental data	494-508
Rao, V. Venkateswara / Parameshwaran, R. / Ram, V. Vinayaka	PCM-mortar based construction materials for energy efficient buildings: A review on research trends	95-122
Tipole, Pralhad / Karthikeyan, A. / Bhojwani, Virendra / Deshmukh, Suhas / Tipole, Bharati / Shinde, Krushad / Sundare, Advait / Shendage, Dadasaheb / Faisal, Wasif / Vikhe, Akshay	Performance analysis of vapour compression water chiller with magnetic flux at the condenser exit	282-289
Guo, Xi / Huang, Yiheng / Cao, Jinzhen	Performance of a thermal energy storage composite by incorporating diatomite stabilized paraffin as phase change material	1257-1265
Zhu, Na / Wu, Mengdu / Hu, Pingfang / Xu, Linghong / Lei, Fei / Li, Shanshan	Performance study on different location of double layers SSPCM wallboard in office building	23-31
Qian, Zhenchao / Shen, Heng / Fang, Xin / Fan, Liwu / Zhao, Ning / Xu, Jian	Phase change materials of paraffin in h-BN porous scaffolds with enhanced thermal conductivity and form stability	1184-1188
Petrini, Francesco / Gkoumas, Konstantinos	Piezoelectric energy harvesting from vortex shedding and galloping induced vibrations inside HVAC ducts	371-383
Dikel, Erhan E. / Newsham, Guy R. / Xue, Henry / Valdes, Julio J.	Potential energy savings from high-resolution sensor controls for LED lighting	43-53
Seifhashemi, M. / Capra, B. R. / Milller, W. / Bell, J.	The potential for cool roofs to improve the energy efficiency of single storey warehouse-type retail buildings in Australia: A simulation case study	1393-1403
Mostafavi, Nariman / Gándara, Fernanda / Hoque, Simi	Predicting water consumption from energy data: Modeling the residential energy and water nexus in the integrated urban metabolism analysis tool (IUMAT)	1683-1693
Bre, Facundo / Gimenez, Juan M. / Fachinotti, Víctor D.	Prediction of wind pressure coefficients on building surfaces using artificial neural networks	1429-1441
Liu, Fengli / Zhu, Jiaoqun / Liu, Junhua / Ma, Baoguo / Zhou, Weibing / Li, Ruguang	Preparation and properties of capric-stearic acid/White Carbon Black composite for thermal storage in building envelope	1781-1789
Yu, F. W. / Ho, W. T. / Chan, K. T. / Sit, R. K. Y.	Probabilistic analysis of mist cooler effectiveness for air-cooled chiller systems	1553-1563
Szczurek, Andrzej / Dolega, Anna / Maciejewska, Monika	Profile of occupant activity impact on indoor air — method of its determination	1564-1575
Metzmacher, Henning / Wölki, Daniel / Schmidt, Carolin / Frisch, Jérôme / van Treeck, Christoph	Real-time human skin temperature analysis using thermal image recognition for thermal comfort assessment	1063-1078
Xia, Tongling / Bian, Ye / Zhang, Li / Chen, Chun	Relationship between pressure drop and face velocity for electrospun nanofiber filters	987-999
de Dear, Richard / Kim, Jungsoo / Parkinson, Thomas	Residential adaptive comfort in a humid subtropical climate—Sydney Australia	1296-1305
Milesi Ferretti, Natascha / Miyata, Masato / Baumann, Oliver	A retrospective on the impact of Annex 40 and Annex 47 research on the international state of building commissioning	54-61
Royapoor, Mohammad / Antony, Anu / Roskilly, Tony	A review of building climate and plant controls, and a survey of industry perspectives	453-465
Wells, Louise / Rismanchi, Behzad / Aye, Lu	A review of Net Zero Energy Buildings with reflections on the Australian context	616-628
Song, Mengjie / Niu, Fuxin / Mao, Ning / Hu, Yanxin / Deng, Shiming	Review on building energy performance improvement using phase change materials	776-793
Yuan, Tianhao / Zhu, Neng / Shi, Yunfei / Chang, Chen / Yang, Kun / Ding, Yan	Sample data selection method for improving the prediction accuracy of the heating energy consumption	234-243
Li, Zhaoxuan / Dong, Bing	Short term predictions of occupancy in commercial buildings—Performance analysis for stochastic models and machine learning approaches	268-281
Triana, Maria Andrea / Lamberts, Roberto / Sassi, Paola	Should we consider climate change for Brazilian social housing? Assessment of energy efficiency adaptation measures	1379-1392
Yang, Yunyun / Kong, Weibo / Cai, Xufu	Solvent-free preparation and performance of novel xylitol based solid-solid phase change materials for thermal energy storage	37-42
Jeong, Jongsoo / Lubis, Arnas / Saito, Kiyoshi / Karng, Sarngwoo / Kim, Seoyoung / Kim, Kwangho	Start-up behaviour of a combined air-conditioning system in cooling and heating operating modes	1346-1357
Horrigan, Matthew / Turner, William J. N. / O'Donnell, James	A statistically-based fault detection approach for environmental and energy management in buildings	1499-1509
Yoshida, Akira / Yoshikawa, Jun / Fujimoto, Yu / Amano, Yoshiharu / Hayashi, Yasuhiro	Stochastic receding horizon control minimizing mean-variance with demand forecasting for home EMSs	1632-1639
Menhoudj, Sayeh / Mokhtari, Abderrahmane −. Mejedoub / Benzaama, Mohamed-Hichem / Maalouf, Chadi / Lachi, Mohamed / Makhlouf, Mohammed	Study of the energy performance of an earth—Air heat exchanger for refreshing buildings in Algeria	1602-1612
Xie, Jingchao / Cui, Yaping / Liu, Jiaping / Wang, Jianping / Zhang, Hong	Study on convective heat transfer coefficient on vertical external surface of island-reef building based on naphthalene sublimation method	300-309
Lu, Shilei / Zhang, Tianshuai / Chen, Yafei	Study on the performance of heat storage and heat release of water storage tank with PCMs	1770-1780
Lee, Je Hyeon / Kim, Hyemi / Song, Young-hak	A Study on verification of changes in performance of a water-cooled VRF system with control change based on measuring data	712-720
Koulamas, C. / Kalogeras, A. P. / Pacheco-Torres, R. / Casillas, J. / Ferrarini, L.	Suitability analysis of modeling and assessment approaches in energy efficiency in buildings	1662-1682
Gallagher, Colm V. / Bruton, Ken / Leahy, Kevin / O'Sullivan, Dominic T. J.	The suitability of machine learning to minimise uncertainty in the measurement and verification of energy savings	647-655
Tagliabue, Lavinia Chiara / Di Giuda, Giuseppe Martino / Villa, Valentina / De Angelis, Enrico / Ciribini, Angelo Luigi Camillo	Techno-economical Analysis based on a Parametric Computational Evaluation for decision process on envelope technologies and configurations	736-749
Ye, Xiao / Kang, Yanming / Yang, Xiufeng / Zhong, Ke	Temperature distribution and energy consumption in impinging jet and mixing ventilation heating rooms with intermittent cold outside air invasion	1510-1522
Shan, Wenyu / Rim, Donghyun	Thermal and ventilation performance of combined passive chilled beam and displacement ventilation systems	466-475
Wang, Haiying / Sun, Lin / Guan, Hongyu / Hu, Songtao	Thermal environment investigation and analysis on thermal adaptation of workers in a rubber factory	1625-1631
Misiopecki, Cezary / Bouquin, Marine / Gustavsen, Arild / Jelle, Bjørn Petter	Thermal modeling and investigation of the most energy-efficient window position	1079-1086
Kośny, Jan / Fontanini, Anthony D. / Shukla, Nitin / Fallahi, Ali / Watts, Alliston / Trifu, Roxana / Ganapathysubramanian, Baskar	Thermal performance analysis of residential attics containing high performance aerogel-based radiant barriers	1036-1048
Kazmi, Syed Minhaj Saleem / Munir, Muhammad Junaid / Patnaikuni, Indubhushan / Wu, Yu-Fei / Fawad, U.	Thermal performance enhancement of eco-friendly bricks incorporating agro-wastes	1117-1129
Saffari, Mohammad / Piselli, Cristina / de Gracia, Alvaro / Pisello, Anna Laura / Cotana, Franco / Cabeza, Luisa F.	Thermal stress reduction in cool roof membranes using phase change materials (PCM)	1097-1105
Garrido, I. / Lagüela, S. / Arias, P. / Balado, J.	Thermal-based analysis for the automatic detection and characterization of thermal bridges in buildings	1358-1367
Tian, Zhichao / Zhang, Xinkai / Jin, Xing / Zhou, Xin / Si, Binghui / Shi, Xing	Towards adoption of building energy simulation and optimization for passive building design: A survey and a review	1306-1316
Monteiro, Claudia Sousa / Costa, Carlos / Pina, André / Santos, Maribel Y. / Ferrão, Paulo	An urban building database (UBD) supporting a smart city information system	244-260
Li, Chaosu / Song, Yan / Kaza, Nikhil	Urban form and household electricity consumption: A multilevel study	181-193
Zhang, Limao / Li, Yan / Stephenson, Robert / Ashuri, Baabak	Valuation of energy efficient certificates in buildings	1226-1240
Ibáñez-Puy, María / Martín-Gómez, César / Bermejo-Busto, Javier / Sacristán, José Antonio / Ibañez-Puy, Elia	Ventilated Active Thermoelectric Envelope (VATE): Analysis of its energy performance when integrated in a building	1586-1592
Daniel, Lyrian	' We like to live in the weather': Cooling practices in naturally ventilated dwellings in Darwin, Australia	549-557
Zou, Han / Zhou, Yuxun / Jiang, Hao / Chien, Szu-Cheng / Xie, Lihua / Spanos, Costas J.	WinLight: A WiFi-based occupancy-driven lighting control system for smart building	924-938
Cui, Yuanlong / Zhu, Jie	Year-round performance assessment of a ground source heat pump with multiple energy piles	509-524

Über diese
Datenseite
IssueID
38667
Veröffentlicht am:
27.10.2020
Geändert am:
09.05.2022

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Energy and Buildings - Januar 2018

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Energy and Buildings - Januar 2018

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.