Construction and Building Materials - Mai 2024

Erschienen:	Mai 2024

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Zaid, Osama / Ouni, Mohamed Hechmi El	Advancements in 3D printing of cementitious materials: A review of mineral additives, properties, and systematic developments	136254
Jin, Xinxiang / Yang, Xincong / Jiang, Yuexin / Li, Ye	An AI-based partial explainable prediction of rubber concrete strength on mobile devices	136234
Wu, Shutao / Zhang, Wuman / Zhang, Yabo / Wang, Chenguang	Arresting properties of polypropylene fiber-reinforced foamed concrete under wet-dry cycles	136233
Li, Menglu / Qi, Shaobo / Huang, Guangyan / Yang, Lei / Yan, Ke / Bai, Jiaqi	Blast mitigation effects of TPU polymers-based inflated membrane structures under external explosion	136237
Zhang, Lianzhen / Huang, Changxin / Li, Zhipeng / Han, Xu / Zhang, Qingsong / Gao, Yang	Characteristics of slurry-water mixing region in fractured rock mass grouting process: Experimental study	136244
Li, Hongbo / Kang, Xinrui / Li, Sheng / Shan, Long / Zhang, Zhe / Wang, Zi	Characterization and mechanism study of sulfate saline soil solidification in seasonal frozen regions using ternary solid waste-cement synergy	136263
Zhang, Wei / Ding, Dawei / Li, Mengmeng / Wang, Tiao / Ma, Hongyan / Chen, Binmeng / Hu, Hongxing / Chen, Jizhou / Liu, Xiaomin / Hou, Dongshuai	Chloride binding mechanism in seawater-mixed UHPC	136191
Li, Yinxue / Guo, Xiaolu	Coupling evaluation of carbon emissions and strength: Early carbonation curing of cement mortar containing incinerated sewage sludge ash (ISSA)	136278
Mahesh, S. / Anoop, M. B. / Sasmal, Saptarshi	Creep and fracture of UHSC — A microindentation study	136173
De Silva, Asanka / Sounthararajah, Arooran / Dutta, Troyee Tanu / Firth, David / Harrison, Jaimi / Haghighi, Hamed / Kodikara, Jayantha	Crushed rock treated with anionic bituminous emulsion for construction of unsealed roads in Australia with enhanced long-term performance	136137
Liu, Xiang / Tang, Pei / Chen, Wei	Development of an ettringite-based low carbon binder by promoting the nucleation and Ostwald ripening process	136282
Dushimimana, Aloys / Sena-Cruz, José / Correia, Luís / Miguel Pereira, João / Cabral-Fonseca, Susana / Cruz, Ricardo	Durability of bond between EBR-CFRP laminate and concrete after four years of natural outdoor and accelerated ageing exposures	136213
Chen, Zhanbiao / Pan, Hongshu / Zhuo, Kexian / Su, Jiaying / Xie, Beixin / Lin, Jiaxiang / Guo, Yongchang	Dynamic compressive behavior of environmentally friendly high-strength concrete: Experimental investigation and modelling	136259
Hashemi, Seyyed Shayan / Ganjali, Ahmad / Mirzakhani, Aboozar / Irani, Hamidreza / Dezhampanah, Soudabeh	Effect of magnesium oxide and copper oxide nanoparticles on UHPC properties under different curing conditions	136198
Zhang, Qian / Liu, Bo / Wang, Shuying / Lu, Xuhang / Li, Qiong / Liu, Jiling / Wei, Siyu / Fan, Jiaxing / Zhang, Shengen	Effect of wet milling activation on mechanical properties and hydration process of cement composites with blast furnace slag	136298
Paul, Shantanu / Islam, Mohammad Shariful / Chakma, Namrata	Effectiveness of areca fiber and cement on the engineering characteristics of compressed stabilized earth blocks	136290
Jia, Hongyu / Chen, Zhilin / Jiang, Peng / Pan, Fangya / Li, Luming	Enhancing flame retardancy and antibacterial properties of wood veneer by promoting crosslinking in metal-organic framework structures	136167
Vercher, Jose / Borràs, Júlia G. / Lerma, Carlos / Mas, Ángeles / Gil, Enrique	Estimation by capillary water absorption method to building natural stones’ durability against freeze-thaw	136215
Bandarra, B. S. / Monteiro, L. / Veloso, G. / Abreu, P. / Sousa, H. / Martins, R. C. / Pereira, J. L. / Coelho, P. A. L. F. / Quina, M. J.	Evaluation of MSW incineration bottom ash for environmentally safe geotechnical applications	136011
Zhang, Xin / Zhao, Mingyun / Zhao, Ernian / Liu, Jinhui / Liu, Qiaoling / Li, Shuming / Yin, Hang / Yang, Chao / Li, Xiurong	Experimental investigation into mechanical properties of inorganic-bonded bamboo composite for structural applications	136247
Fang, Yawei / Fang, Zhi / Liu, Pengjie / Xiang, Yu / Zhou, Xuhong	Experimental investigation on post-impact bond performance of carbon fiber-reinforced polymer tendons in ultra-high performance concrete	136214
Wang, Xinzhe / Jiang, Lishuai / Li, Yongyuan / Zhang, Lei / Sainoki, Atsushi / Mitri S, Hani / Yang, Yiming / Peng, Xiaohan	Experimental study on the mechanical behavior and failure characteristics of rock analogs with filled internal fractures: A new method by sand powder 3D printing	136261
Luo, Yong / Luo, Yuanwang / Wu, Chen / Yussof, Mustafasanie M.	Finite element simulation and falling ball impact model for cement concrete pavement considering void under slab	136245
Yin, Tianyi / Jin, Lang / Liu, Kangning / Fan, Dingqiang / Dong, Enlai / Yu, Rui	Fractal evolution model of proton spatial distribution in low water/binder cement-based composites (LW/B-CC) during early-age hydration process	136287
He, Haijie / Shuang, E. / Qiao, Hongxia / Yang, Jie / Lin, Caiyuan / He, Chuang / Xu, Peng	A general and simple method to disperse 2D nanomaterials for promoting cement hydration	136217
Hassan, Abba Musa / Bunnori, N.Muhamad / Ramesh, S. / Tan, Chou Yong / Mo, Kim Hung	Glass-based foam from alkali activation: A review on effect of primary foaming parameters on microstructure and density	136157
Huang, Jiyun / Huang, Jian / Min, Junjie / Lv, Ruoyun / Kuang, Hao / Hu, Hailong / Yang, Rong / Tang, Pei / Zhao, Qinglin / Jian, Shouwei / Ma, Baoguo	Hydration mechanism of a sodium-doped phosphogypsum-based hemihydrate whisker (omongwaite) in supersulfated cement system	136236
Moreno-Maroto, José Manuel / Alonso-Azcárate, Jacinto	Hydrothermal zeolitization: Towards a paradigm shift for producing stronger and more sustainable construction materials	136269
Zeyad, Abdullah M. / Bayraktar, Oguzhan Yavuz / Tayeh, Bassam A. / Öz, Ali / Özkan, İffet Gamze Mütevelli / Kaplan, Gökhan	Impact of rice husk ash on physico-mechanical, durability and microstructural features of rubberized lightweight geopolymer composite	136265
Wang, Xianke / Su, Na / Chen, Xiaohan / Fei, Benhua / Ma, Xinxin / Liu, Huanrong / Miao, Hu / Fang, Changhua	Impact of temperature on mechanical properties and dimensional stability in a novel gradient pressure bamboo flattening technique	136258
Jin, Yong / Yu, Xin / Dong, Fuqiang / Wang, Shiyu / Jiang, Yang / Lu, Jinli	The improvement of various polyethylene on the high-temperature performance of degraded ground tire rubber modified asphalt and the compatibility enhancement mechanism of compatibilizer for composite modified asphalt	136255
Wu, Wenda / Kang, Sixiang / Gong, Qingnan / Yao, Hongyu / Zhang, Kaijian / Yang, Hongfei / Li, Huang / Wang, Dehui	Influences of aggregate gradation on alkali-silica reaction of seawater and sea sand concrete	136268
Sun, Ming / Mao, Xinya / Gao, Xiaojian / Lin, Youzhu / Li, Ke / Zou, Chaoying	Innovative encapsulation of alkali activators in alkali-activated slag concrete: A sustainable strategy for regulating setting time and durability	136230
Liu, Zhu / Yang, Shoulu / Wang, Zhongwei / Ji, Ning / Qing, Yan	Leach-resistant modified bamboo with fire-retardant and anti-mildew properties via in situ synthesis	136249
Yong-Jie, Hang / Cheng-Yong, Heah / Yun-Ming, Liew / Abdullah, Mohd Mustafa Al Bakri / Yeng-Seng, Lee / Wei-Hao, Lee / Pakawanit, Phakkhananan / Shee-Ween, Ong / Hoe-Woon, Tee / Cheng-Hsuan, Hsu	Microwave absorption function on a novel one-part binary geopolymer: Influence of frequency, ageing and mix design	136264
Akbarpoor, Sareh / Rezazadeh, Mohammadali / Ghiassi, Bahman / Khayatian, Fazel / Poologanathan, Keerthan / Sefat, Honeyeh Ramezan / Corradi, Marco	A new bond-slip model for NSM FRP systems using cement-based adhesives through artificial neural networks (ANN)	136034
Zhu, Huasheng / Zeng, Xiaohui / Lan, Xuli / Long, Guangcheng / Xie, Youjun / Liu, Jinhui	A novel high-damping metaconcrete through designing resonant aggregates made from recycled rubber powder-coated coarse aggregate	136266
Xu, Yuan / Lu, Yuwei / Meng, Linhui / Cheng, Jiaxin / Ouyang, Fuchang / Duan, Ping / Li, Wengui / Zhang, Huali / Zhu, Yingcan / Zhang, Zuhua	Performance and heavy metal leaching of porous geopolymer based on solid wastes	136186
Zhou, Linlin / Guo, Shuaicheng / Feng, Guangyan / Zhang, Ting / Ma, Wenbo / Shi, Caijun / Zhu, Deju	Performance enhancement of coral aggregate concrete through pre-coating coral aggregate with cement-metakaolin-coral powder ternary slurry	136243
Zhang, Dongsheng / Zhu, Tao / Ai, Qingyi / Mao, Mingjie / Li, Jiabin / Yang, Qiuning	Performance of coal gangue concrete with fly ash and ground-granulated blast slag: Rheology, mechanical properties and microstructure	136250
Seo, Joonho / Choi, Sungsik / Kim, Jisoo / Lee, H. K.	Potential for the liquid carbonation curing of Portland cement using sodium bicarbonate solutions	136220
Sun, Bochao / Dominicus, Randy / Dong, Enlai / Li, Peichen / Ye, Zi / Wang, Wei	Predicting the strength development of 3D printed concrete considering the synergistic effect of curing temperature and humidity: From perspective of modified maturity model	136291
Liu, Hao / Zhang, Zengping / Yu, Xinhe / Kan, Shiyun / Luo, Yu / Han, Kaibo / Liang, Yuzi / Gao, Jiangping	Preparation of polyol from waste polyethylene terephthalate (PET) and its application to polyurethane (PU) modified asphalt	136286
Mukhtar, Faisal / Jawdhari, Akram	RC beams flexurally strengthened with CFRP sheets combined with FRC layer for mitigating debonding failures	136274
Liu, Fangcheng / Zheng, Kai / Jia, Bin / Yang, Jun / Wu, Mengtao	Shear modulus and damping ratio of granulated rubber-sand mixtures: Influence of relative particle size	136205
Nagheh, Elnaz / Mostofinejad, Davood / Saljoughian, Alireza	Shear strengthening of RC arches with FRP composites using EBR and EBROG methods: Experimental and theoretical study	136212
Gamage, Nayanatara / Patrisia, Yulin / Gunasekara, Chamila / Law, David W. / Houshyar, Shadi / Setunge, Sujeeva	Shrinkage induced crack control of concrete integrating synthetic textile and natural cellulosic fibres: Comparative review analysis	136275
Ke, Guoju / Li, Zheyu / Jiang, Haishun	Study on long-term solidification of all-solid waste cementitious materials based on circulating fluidized bed fly ash, red mud, carbide slag, and fly ash	136284
Wu, Cong / Li, Mengmeng / Hou, Dongshuai / Yin, Bing / Chen, Binmeng / Li, Zongjin	Topologically optimized polystyrene acrylate-polysiloxane copolymer coatings toward superior durability of cementitious materials	136106
Su, Linping / Jiao, Yuepeng / Wang, Jianjiang / Zhang, Yunfeng / Liang, Ming / Xin, Xue / Luan, Xuehao / Wang, Hao / Chen, Zhenchao / Chen, Lin / Yao, Zhanyong	Ultra-low detection limit self-sensing nanocomposites with self-assembled conductive microsphere arrays for asphalt pavement health monitoring	136279
Tian, Xiang / Shuai, Jia / Wu, Jie / Zhong, Qingyu / Liu, Zhunzhun / Jin, Zuquan	Understanding the influence of compressive strength, microstructure, and mechanism for metakaolin-based geopolymer under varying rest periods in the curing process	136239
Shin, Tae Yong / Kim, Jae Hong	Vibrorheology of fresh cement-based materials with different compaction energy	136228

Über diese
Datenseite
IssueID
72274
Veröffentlicht am:
29.04.2024
Geändert am:
20.06.2024

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - Mai 2024

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - Mai 2024

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.