Construction and Building Materials - Februar 2023

Erschienen:	Februar 2023

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Madraszewski, Szymon / Sielaff, A. Maria / Stephan, Dietmar	Acid attack on concrete – Damage zones of concrete and kinetics of damage in a simulating laboratory test method for wastewater systems	130121
Lin, Youli / Maghool, Farshid / Arulrajah, Arul / Horpibulsuk, Suksun	Alkali activation of recycled concrete and aluminum salt slag aggregates for semi-rigid column inclusions	130106
Ali-Benyahia, Khoudja / Kenai, Said / Ghrici, Mohamed / Sbartaï, Zoubir-Mehdi / Elachachi, Sidi-Mohammed	Analysis of the accuracy of in-situ concrete characteristic compressive strength assessment in real structures using destructive and non-destructive testing methods	130161
Yuan, Kangze / Li, Qingxiang / Ni, Wankui / Lü, Xiangfei / Della Vecchia, Gabriele / Wang, Haiman / Nie, Yongpeng	Analysis of the structural and environmental impacts of hydrophilic ZSM-5 molecular sieve on loess	130248
Battiston, Tommaso / Comboni, Davide / Verri, Giancarlo / Hanfland, Michael / Gatta, G. Diego	Anisotropic compressional behaviour of the Sorel cement F5-phase (Mg3(OH)5Cl·4H2O)	130162
Chen, Bei / Yu, Xin / Dong, Fuqiang / Zheng, Changjiang / Zhao, Shuang / Zu, Yuanzhe	The application of intelligent control technology for the evaluation of temperature segregation in asphalt mixture paving	130178
Malinowski, Szymon	Aromatisation process as part of bitumen ageing in the light of electronic structure and further oxidation of its components	130198
Hafsa, Wael / Nguyen, Tuan Anh / Angellier, Nicolas / Ulmet, Laurent / Takarli, Mokhfi / Pop, Octavian / Dubois, Frédéric	Assessment of moisture content profile in Douglas-fir wood using electrical resistivity-based tomography	130193
Nocetti, Michela / Mannucci, Massimo / Brunetti, Michele	Automatic assessment of insect degradation depth in structural solid wood elements by drilling resistance measurements	130273
Zhou, Yiqi / Mahmood, Sultan / Engelberg, Dirk Lars	Bipolar electrochemistry for high throughput screening of localised corrosion in stainless steel rebars	130174
Zhou, Haijun / Li, Yeting / Ma, Cong / Zhou, Zonglong / Fang, Zefeng / Lou, Jianing / Liu, Yu	Bond performance and mechanisms of sulphoaluminate cement-based UHPC for reinforcing old concrete substrate	130233
Xu, Qingmeng / Xu, Feifan / Sun, Chen / Huang, Xiao / Luo, Hongjie	Cellulose nanocrystals lime mortar based on biomimetic mineralization	130209
Jiang, Baozhen / Doi, Kotaro / Tsuchiya, Koichi	Characterization of microstructures and micromechanical properties of naturally generated rust layer in 60-year old reinforced concrete	130203
Chen, Hao / Mulugeta Alamnie, Mequanent / Barbieri, Diego Maria / Zhang, Xuemei / Liu, Gang / Hoff, Inge	Comparative study of indirect tensile test and uniaxial compression test on asphalt mixtures: Dynamic modulus and stress-strain state	130187
Zheng, Yongqian / Xiao, Yanjun	A comparative study on strength, bond-slip performance and microstructure of geopolymer/ordinary recycled brick aggregate concrete	130257
Erkus, Yunus / Kök, Baha Vural	Comparison of physical and rheological properties of calcium carbonate-polypropylene composite and SBS modified bitumen	130196
Sudagar, Alcina Johnson / Andrejkovičová, Slávka / Rocha, Fernando / Patinha, Carla / Velosa, Ana / da Silva, Eduardo Ferreira	Compressive strength and heavy metal adsorption of cork residue, natural zeolite, and low-grade metakaolin-based geopolymers	130125
Wang, Facheng / Cheng, Zhengqing / Li, Bo	Confinement-dependent failure criterion for high-strength concrete in multiaxial stress states	130164
Brinkmann, Maximilian / Wiehle, Philipp	Correlation between relative humidity and the strength and deformation characteristics of unstabilised earth masonry	130048
Wu, Weiwei / He, Xiongjun / Yang, Wenrui / Shahria Alam, M. / Wei, Bingyan / He, Jia	Degradation factors and microstructure degradation characteristics of B/GFRP bars in harsh environment: A review	130246
Zhu, Aoao / Zhang, Xin / Yang, Rongwei / Wang, Changlong	The deterioration mechanisms of hardened cement paste exposed to combined action of cyclic wetting–drying, salt attack and carbonation	130148
Chu, S. H. / Yang, E. H. / Unluer, C.	Development of nanofiber reinforced reactive magnesia-based composites for 3D printing	130270
Ejbouh, Aadil / Ech-chebab, Adil / Hassi, Sara / Galai, M. / Benqlilou, H. / Ebn Touhami, Mohamed	Durability assessment of LC3-based reinforced concrete under combined chloride-sulfate environment via the EIS technique	130194
Tan, Guojin / Zhu, Zhiqing / Wang, Wensheng / He, Xin / Zhang, Sufeng / Wei, Xueliang / Wan, Feihong	Durability evaluation of PP-ECC with local superfine sand (SSPP-ECC) serviced in seasonal frozen region	130278
Benny, Benzen / Bazli, Milad / Rajabipour, Ali / Arashpour, Mehrdad	Durability of tubular sea water sea sand concrete and fibre-reinforced polymer hybrid structures: Mechanisms and effective parameters: Critical overview and discussion	130206
Wu, Hansong / Shen, Aiqin / Ren, Guiping / Ma, Qiang / Wang, Zhe / Cheng, Qianqian / Li, Yue	Dynamic mechanical properties of fiber-reinforced concrete: A review	130145
Lyu, Haoyan / Chen, Yanlong / Pu, Hai / Ju, Feng / Zhang, Kai / Li, Qiang / Wu, Peng	Dynamic properties and fragmentation mechanism of cemented tailings backfill with various particle size distributions of aggregates	130084
Li, Chuanqiang / Wang, Haobo / Fu, Chaoliang / Shi, Shaosong / Liu, Quan / Xu, Peixin / Liu, Qizheng / Zhou, Dan / Cheng, Ying / Jiang, Lin	Effect and mechanism of waste glass powder silane modification on water stability of asphalt mixture	130086
Zhang, Mo / Zhang, Chen / Zhang, Junfei / Wang, Ling / Wang, Fang	Effect of composition and curing on alkali activated fly ash-slag binders: Machine learning prediction with a random forest-genetic algorithm hybrid model	129940
Fang, Ruichang / Wang, Boxin / Pan, Jingjing / Liu, Jiaqi / Wang, Zihao / Wang, Qing / Ling, Xianzhang	Effect of concrete surface roughness on shear strength of frozen soil–concrete interface based on 3D printing technology	130158
Zhang, Li / Zhao, Ruiqi / Wang, Ning / Guan, Xuemao	Effect of Mg-doping on the hydration reactivity of polycrystalline dicalcium silicate: A study explored by DFT simulation	130122
Liu, Dongmei / Wang, Qing / Xu, Gang / Peng, Yanzhou / Huang, Taiqi / Yu, Xia	Effect of modifiers on crystalizing habit and mechanical strength of α-hemihydrate gypsum prepared from PG by an autoclaved method	130114
He, Wei / Li, Shilei / Jiao, Zhinan / Wang, Ning / Xu, Jihang / Zhou, Junshuang / Zhao, Qingxin	Effect of regenerated nano-FeB on mechanical properties of cement paste	130172
Ruan, Wenqiang / Liao, Jianguo / Gu, Xinqi / Mo, Jiajia / Cai, Mengmeng / Guo, Wenjie / Li, Fengheng / Zhu, Yu / Ma, Xiaoe	Effects of bauxite tailings and sodium silicate on mechanical properties and hydration mechanism of magnesium phosphate cement	130055
Li, Yupeng / Jiang, Wei / Xiao, Jingjing / Zhao, Funan / Zhang, Shuangjiao / Xing, Chengwei / Yuan, Dongdong	Effects of kneading and impact action on the movement of aggregates in asphalt mixtures during compaction	130210
Wang, Haoyu / Zhao, Xianhui / Gao, Han / Yuan, Tiebiao / Zhang, Xijin	The effects of salt-loss soda residue and oxalate acid on property and structure of fly ash-based geopolymer	130214
Al-Fakih, Amin / Al-Awsh, Waleed / Ahmed Al-Koshab, Monther Qassim / Al-Shugaa, Madyan A. / Al-Osta, Mohammed A. / Drmosh, Q. A. / Musa, Abubakr E. S. / Abdulqader, Marwan A. / Elgzoly, Mohammed A. A. / Onaizi, Sagheer A.	Effects of zeolitic imidazolate framework-8 nanoparticles on physicomechanical properties and microstructure of limestone calcined clay cement mortar	130236
Dong, Zhi-Hao / Pan, Xiao-Hua / Tang, Chao-Sheng / Wang, Dian-long / Wang, Rui / Shi, Bin	An efficient microbial sealing of rock weathering cracks using bio-carbonation of reactive magnesia cement	130038
Sara, Bachene / Mhamed, Adjoudj / Otmane, Boukendakdji / Karim, Ezziane	Elaboration of a Self-Compacting mortar based on concrete demolition waste incorporating blast furnace slag	130165
Zhu, Miaochang / Li, Xiaoda / Deng, Jun / Peng, Sirui	Electrochemical impedance based interfacial monitoring for concrete beams strengthened with CFRP subjected to wetting–drying cycling and sustained loading	130238
Tanaka, Shunsei / Sakai, Yuya	Estimation of actual pore-size distribution by inverse analysis of mercury intrusion	130208
Fatemi, Saeed / Zarei, Mohammad / Ziaee, Seyed Ali / Saadatjoo, Seyed Amir / Worya Khordehbinan, Mohammad	Evaluation of long-term fracture behavior of amorphous poly alpha olefin (APAO)-modified Hot Mix Asphalt (HMA) under modes I and II at low and intermediate temperatures	130188
Devulapalli, Lekhaz / Madichetty, Chandrakala L. / Ramchandra Ghadyale, Tejaswini / Begum, Afreen / Dighe, Sunil	Evaluation of the ageing characteristics of VG-30, RAP and HiMA using FTIR	130185
Rehman, Waheed Ur / Rehman, Amin Ur / Sharif, Qazi Muhammad / Yamin, Asma	Exfoliation characteristics of Swat vermiculite clay and its application in the preparation of lightweight composite panels	130200
Li, Zhaoyu / Sun, Wei / Gao, Tong / Zhao, Jianguang / Lu, Kaifang / Cheng, Haiyong	Experimental study on evolution of pore structure of inclined layered cemented tailings backfill based on X-ray CT	130242
Kong, Xianghui / Zhang, Zhibin / Liang, Yunpeng / Wang, Xiaokang / Liu, Mengmeng	Experimental study on solidified dredged sediment with MgO and industrial waste residue	130105
Qiu, Yue / Sun, Qi / Feng, Kaile / Luo, Ang / Wu, Xiangsheng / Ba, Mingfang	Experimental study on the preparation of magnesium oxysulfate cement-based composites using waste locust powders to replace non-renewable magnesium oxide	130129
Chen, Yibo / Zhang, Yao / Zhang, Shaoqi / Guo, Qinghua / Gao, Yang / Zhang, Tong / Zhao, Weigang / Chen, Qing / Zhu, Hehua	Experimental study on the thermal properties of a novel ultra-high performance concrete reinforced with multi-scale fibers at elevated temperatures	130229
Zhao, Weijian / Feng, Siyuan / Liu, Jianxiang / Sun, Bochao	An explainable intelligent algorithm for the multiple performance prediction of cement-based grouting materials	130146
Huang, Jun-Qi / Kumar, Sushil / Dai, Jian-Guo	Flexural performance of steel-reinforced geopolymer concrete one-way slabs: Experimental and numerical investigations	130098
Kim, Jiyoung / Choi, Seongcheol	Fractal-based microstructure reconstruction to predict the permeability of cement pastes	130157
Xu, Huiying / Bu, Jingwu / Chen, Xudong / Chen, Qian / Xu, Bo	Fracture behavior of dredged sand concrete under freeze–thaw cycles	130192
Cao, Yugui / Zhao, Guoxu / Liu, Muyu / Jin, Qingping / Tao, Zhong / Jiang, Cheng	FRP-confined rubber concrete with effect of strain rate: Tests and analysis-oriented stress–strain model	130234
Lee, Seong-Hyeok / Choi, Chang-Yong / Le, Tri Ho Minh / Park, Dae-Wook	Full-Scale investigation on inclined ballastless cant track using concrete slab panel at high temperature setting	130225
Dong, Jinmei / Zheng, Weixin / Chang, Chenggong / Wen, Jing / Xiao, Xueying	Function and effect of borax on magnesium phosphate cement prepared by magnesium slag after salt lake lithium extraction	130280
Wang, Sen / Gainey, Lloyd / Mackinnon, Ian D. R. / Xi, Yunfei	High- and low-defect kaolinite for brick making: Comparisons of technological properties, phase evolution and microstructure	130250
Zhang, Rui / Zhang, Weiguang / Huang, Wei / Ma, Tao / Wang, Qing / Fang, Kexin / Wang, Kangnan	High-precision monitoring method for airport deformation based on time-series InSAR technology	130144
Du, Jiang / Guo, Pengwei / Liu, Zhuo / Meng, Weina	Highly thixotropic ultra-high-performance concrete (UHPC) as an overlay	130130
Sun, Xin / Wang, Honglei / Mei, Shilong	Highway performance prediction model of International Roughness Index based on panel data analysis in subtropical monsoon climate	130232
Zhao, Jihui / Li, Zhangheng / Wang, Dongmin / Yan, Peiyu / Luo, Lu / Zhang, Hewu / Zhang, Haiming / Gu, Xiaobo	Hydration superposition effect and mechanism of steel slag powder and granulated blast furnace slag powder	130101
Miah, Md Jihad / Lo Monte, Francesco / Felicetti, Roberto / Pimienta, Pierre / Carré, Hélène / La Borderie, Christian	Impact of external biaxial compressive loading on the fire spalling behavior of normal-strength concrete	130264
Xu, Rongsheng / Wang, Haoran / Zha, Qingkun / Lin, Jian	Improving the carbonation resistance of alkali-activated slag mortars with different additives: experimental evaluations	130197
Cao, Jierong / Ding, Qingjun / Hou, Dongshuai / Xiong, Chuansheng / Jin, Zuquan / Zhang, Gaozhan	Influence of hoop restraint on microstructure and phase composite of cement paste filled steel tube under external sulfate attack	130195
Qiu, Heping / Wu, Yongchang / Chen, Huaxin / Wang, Ruiyang / Yu, Jincheng / Lin, Yuruo	Influence of SiC on the thermal energy transfer and storage characteristics of microwave-absorbing concrete containing magnetite and/or carbonyl iron powder	130191
de Hita, María Jimena / Criado, Maria	Influence of superplasticizers on the workability and mechanical development of binary and ternary blended cement and alkali-activated cement	130272
Adwani, Dheeraj / Sreeram, Anand / Pipintakos, Georgios / Mirwald, Johannes / Wang, Yudi / Hajj, Ramez / Jing, Ruxin / Bhasin, Amit	Interpreting the effectiveness of antioxidants to increase the resilience of asphalt binders: A global interlaboratory study	130231
Chen, Xu / Ren, Dongya / Tian, Gangsheng / Xu, Jie / Ali, Rahman / Ai, Changfa	Investigation on moisture damage resistance of asphalt pavement in salt and acid erosion environments based on Multi-scale analysis	130177
Liu, Hongbo / Qiu, Can / Zhao, Jingxian / Li, Wenjie / Shi, Jie / Liu, Haonan / Chen, Zhihua	Investigation on the mechanical behavior of glulam spliced joints connected with self-tapping screws and prestressed steel strips	130190
Yan, Pengfei / Ma, Zhanguo / Li, Hongbo / Gong, Peng / Xu, Min / Chen, Tao	Laboratory tests, field application and carbon footprint assessment of cement-stabilized pure coal solid wastes as pavement base materials	130265
Mahpour, Alireza / Alipour, Shaghayegh / Khodadadi, Mojtaba / Khodaii, Ali / Absi, Joseph	Leaching and mechanical performance of rubberized warm mix asphalt modified through the chemical treatment of hazardous waste materials	130184
Gao, Yan / Zhang, Tianlong / Wang, Qingjing / Yang, Shusheng / Zhuo, Jiancheng / Tang, Jincai / Zhu, Ying / Wang, Ping / He, Qing	Low-construction-emissions Optimization for Railway Alignment Fine-grained Designs within Densely Populated Urban Areas	130179
Hofer, Kristina / Mirwald, Johannes / Bhasin, Amit / Hofko, Bernhard	Low-temperature characterization of bitumen and correlation to chemical properties	130202
Xue, Xilong / Gu, Yuantong / Zhang, Xiao / Wu, Shuanjun / Sun, Pengcheng / Cui, Jiqiang / Wang, Xianlai	Mechanical behavior and microscopic mechanism of fiber reinforced coarse aggregate cemented backfill	130093
Zhang, Mo / Yao, Yalin / Zhang, Junfei / Wang, Ling / Wang, Fang / Ma, Zhaoyang / Wang, Bin	Mechanical properties of hybrid fiber reinforced ternary-blended alkali-activated materials	129841
Yin, Tianxiao / Guo, Chenyue / Wang, Zhiqiang / Zheng, Wei / Gong, Meng	Mechanical properties of mortise-tenon joints reinforced by self-tapping screws with different insertion methods	130243
Luo, Xiaobao / Xing, Guohua / Qiao, Lei / Miao, Pengyong / Yu, Xiaoguang / Ma, Kaize	Multi-objective optimization of the mix proportion for dune sand concrete based on response surface methodology	129928
Wang, Yajian / Li, Pengpeng / Liu, Huifang / Wang, Wentao / Liu, Yalin / Wang, Linbing	Multiple laboratory characterization methods to identify the D-Load of reinforced concrete pipes based on three edge bearing tests	130156
Choi, Seunghak / Panov, Valerii / Han, Seungyeon / Yun, Kyong-Ku	Natural fiber-reinforced shotcrete mixture: Quantitative assessment of the impact of fiber on fresh and plastic shrinkage cracking properties	130032
Chen, Zhao	Non-concrete breakout failure modes of concrete mechanical anchors in tension-a literature review	130222
Farooq, Mohammad Adnan / Nimbalkar, Sanjay	Novel sustainable base material for concrete slab track	130260
Abd El-Lateef, Hany M. / Khalaf, Mai M. / Gouda, Mohamed / Shalabi, Kamal / El‑Taib Heakal, Fakiha / Al-Janabi, Ahmed S. M. / Shaaban, Saad	Novel water-soluble organoselenocyanates and symmetrical diselenides tethered N-succinanilate and N-maleanilate as corrosion inhibitors for reinforced steel in the simulated concrete pore solution	130135
Sun, Kui / Nong, Xingzhong / Feng, Qingsong / Chen, Hua-Peng / Xiao, Jun-hua	Numerical analysis of interface damage in ballastless track on simply supported bridge due to thermal and vehicle dynamic load	130181
Tale Masoule, Mohammad Sadegh / Baffoe, Elvis / Ghahremaninezhad, Ali	On the physicochemical properties and foaming characteristics of proteins in cement environment	130204
Chang, Xiwen / Wan, Liang / Long, Yongshuang / Xiao, Yue / Xue, Yongjie	Optimal zeolite structure design for VOC emission reduction in asphalt materials	130227
Cao, Xing / Zhang, Ruiqi / Zhang, Ning / Chen, Lei / Chen, Dongming / Li, Xuebing	Performance improvement of lauric acid-1-hexadecanol eutectic phase change material with bio-sourced seashell powder addition for thermal energy storage in buildings	130223
Hamasaki, Mizuki / Yamamoto, Rino / Taguchi, Takashi / Shimizu, Keisuke / Komiya, Iwao / Nakajima, Koji / Matsumoto, Yukihiro	Performance of Compression-free turnbuckle braces using partially fibered CFRP under cyclic load	130149
Jin, Kairong / Bi, Wanli / Guan, Yan / Chen, Xiaoyang / Zhou, Xiangming / Wang, Dezhi	Performance of magnesium oxysulfate (MOS) cement with granite powders after combined sulfate and chloride attacks	130141
Gong, Wei / Yu, Hongfa / Ma, Haiyan / Zhu, Haiwei	Physical and mechanical properties and time-varying model of concrete structures under the simulated tidal environment of the South China Sea island and reef	130180
Chen, Shun / Zhang, Bo / Zheng, Hao / He, Xingyang / Su, Ying / Xu, Hui / Zhu, Yan / Pan, Yingyuan / Chen, Jizhan	Polymerized activating highly-dispersible waste tire powder for viscoelasticity regulation of modified asphalt at a lower mixing temperature	130216
Azarhoosh, Mohammad Javad / Koohmishi, Mehdi	Prediction of hydraulic conductivity of porous granular media by establishment of random forest algorithm	130065
Xia, Huiyun / Lu, Changjie / Yang, Haotian / Song, Lifang / Geng, Jiuguang / Zihang, Cui / Niu, Yanhui / Sun, Yihan	Preparation and performance of durable waterproof adhesive layer for steel bridge deck based on self-stratification effect	130133
Zhang, Shuai / He, Yan / Li, Jing / Liu, Leping / Cui, Xuemin	Preparation of potassium methylsilicate modified one-part alkali-activated slag grouting material and its effect on adhesion properties of semi-flexible pavement	130139
Chen, Wenwu / Jia, Bobo / Shan, Xiaokang / Qin, Yilun / Yang, Lei	Preventing the secondary salt deterioration in the repaired area of basal erosion of earthen sites based on capillary barrier effect	130168
Bashar, Iftekhair Ibnul / Sturm, Alexander Bonaparte / Visintin, Phillip / Sheikh, Abdul Hamid	Pull-out creep of hooked-end fibre embedded in ultra-high-performance concrete	130189
Sun, Lipeng / Liu, Yongjian / Shi, Fengrong / Wang, Haitao	Pull-out performance of perfobond rib connectors in steel high-strength concrete composite bridge pylons	130205
Gan, Zhaozhuo / Sun, Yongliang / Sun, Xiaofeng / Zhou, Lina / He, Minjuan	Push-out performance of inclined screw shear connectors used in nail-laminated timber-concrete composite	130175
Liu, Jianglin / Li, Yue / Li, Yinuo / Jin, Caiyun / Lin, Hui / Li, Hongwen	Quantitative study on the dielectric properties of tricalcium silicate pastes under different W/C	130245
Obaidat, Yasmeen Taleb / Barham, Wasim / Obeidat, Raghad B.	Repair of thermally shocked reinforced concrete beams using near-surface mounted – Carbon fiber reinforced polymers ropes and strips	130201
Sun, Wei / Gao, Tong / Zhao, Jianguang / Cheng, Haiyong	Research on fracture behavior and reinforcement mechanism of fiber-reinforced locally layered backfill: Experiments and models	130186
Zhang, Zhibo / Wang, Enyuan / Li, Nan / Zhang, Hongtu / Bai, Zhiming / Zhang, Yinghua	Research on macroscopic mechanical properties and microscopic evolution characteristic of sandstone in thermal environment	130152
Shi, Changyun / Yu, Huanan / Qian, Guoping / Li, Xi / Zhu, Xuan / Yao, Ding / Zhang, Chao	Research on the characteristics of asphalt mixture gradation curve based on Weibull distribution	130151
Gao, Fang-Fang / Tian, Wei / Wang, Wen-Da	Residual impact resistance behavior of concrete containing carbon nanotubes after exposure to high temperatures	130183
Muthukumarana, T. V. / Arachchi, M. A. V. H. M. / Somarathna, H. M. C. C. / Raman, S. N.	A review on the variation of mechanical properties of carbon fibre-reinforced concrete	130173
Guo, Weina / Bao, Jiuwen / Zhang, Peng / Yang, Jinbo / Guo, Deyang / Tian, Yupeng	Self-healing behavior of strain-hardening cementitious composites with MgO-type expansive agent after drop weight impact loading	130235
Suzuki, Takuya / Motomura, Susumu / Kinoshita, Takahiro / Inoue, Yasuhiko / Kushibe, Atsumichi / Iida, Tomohiro	Shape optimization of Hourglass-shaped damper using Fe-Mn-Si-Based alloy considering target Load-displacement relationship and target fatigue characteristics	130091
Cheng, Xiao / Liu, Jianxun / Han, Chao / Zhang, Xiaorui / Wu, Zhishen	Silane coupling agent impact on surface features of modification of basalt fibers and the rheological properties of basalt fiber reinforced asphalt	130182
Jiao, Huazhe / Zhang, Wenxiang / Yang, Yixuan / Chen, Xinming / Yang, Liuhua / Shen, Huiming / Rong, Yangyang / Zhang, Haowen	Static mechanical characteristics and meso-damage evolution characteristics of layered backfill under the condition of inclined interface	130113
Yao, Yuquan / Yang, Jiangang / Gao, Jie / Zheng, Mulian / Xu, Jing / Zhang, Wei / Song, Liang	Strategy for improving the effect of hot in-place recycling of asphalt pavement	130054
Wang, Dongxing / Yang, Duo / Yuan, Yong	Strength improvement and micromechanism of inorganic/organic additive-modified magnesium oxychloride cement solidified sludge	130159
Gebhard, Lukas / Mata-Falcón, Jaime / Iqbal, Arsalan / Kaufmann, Walter	Structural behaviour of post-installed reinforcement for 3D concrete printed shells – A case study on water tanks	130163
Less, Thomas / Demir, Aydin / Sezen, Halil	Structural performance and corrosion resistance of fiber reinforced polymer wrapped steel reinforcing bars	130176
Zhang, Bo / Yan, Bingqian / Li, Yutao	Study on mechanical properties, freeze–thaw and chlorides penetration resistance of alkali activated granulated blast furnace slag-coal gangue concrete and its mechanism	130218
Wu, Huijun / Zhang, Haiying / Zhang, Guangpeng / Liu, Jia / Liu, Zhenyu / Du, Fanghui	Study on preparation and performance of advanced aerogel foamed concrete with ultra-light aerogel	130166
Platt, S. L. / Walker, P. / Maskell, D. / Shea, A. / Bacoup, F. / Mahieu, A. / Zmamou, H. / Gattin, R.	Sustainable bio & waste resources for thermal insulation of buildings	130030
Diniz, Hugo Alessandro Almeida / Martinelli, Antonio Eduardo / Cabral, Kleber Cavalcanti / Ferreira, Ruan Landolfo da Silva / da Silva, Iago Felipe Domingos	Synergistic effects of the use of metakaolin, sand and water on the properties of cementitious composites for 3D printing	130277
D'Antino, Tommaso / Pisani, Marco Andrea	Tensile and compressive behavior of thermoset and thermoplastic GFRP bars	130104
Wang, Zhongwei / Yang, Shoulu / Liu, Zhu / Ding, Fangjun / Ji, Ning / Wu, Yiqiang	Tung oil-based phosphorus-containing polyol as a flame retardant for bamboo	130240
Daheur, Elhadj Guesmia / Li, Zhong-Sen / Demdoum, Abdellah / Taibi, Saïd / Goual, Idriss	Valorisation of dune sand-tuff for Saharan pavement design	130239

Über diese
Datenseite
IssueID
68866
Veröffentlicht am:
19.02.2023
Geändert am:
20.06.2024

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - Februar 2023

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - Februar 2023

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.