Construction and Building Materials - Juli 2021

Erschienen:	Juli 2021

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Soriano, Lourdes / Font, Alba / Tashima, Mauro M. / Monzó, José / Borrachero, María Victoria / Bonifácio, Thaís / Payá, Jordi	Almond-shell biomass ash (ABA): A greener alternative to the use of commercial alkaline reagents in alkali-activated cement	123251
Ghassemirad, Amirhossein / Bala, Nura / Hashemian, Leila / Bayat, Alireza	Application of asphaltenes in high modulus asphalt concrete	123200
Qian, Chunxiang / Zheng, Tianwen / Zhang, Xuan / Su, Yilin	Application of microbial self-healing concrete: Case study	123226
Tiwari, Ashish / Goyal, Shweta / Luxami, Vijay / Chakraborty, Moloy K. / Prabhakar, G.	Assessment of corrosion inhibition efficiency of generic compounds having different functional groups in carbonated pore solution with chlorides and migration ability in concrete	123275
Liu, Kefei / Li, Teng / Wu, Chaofan / Jiang, Kang / Shi, Xianming	Bamboo fiber has engineering properties and performance suitable as reinforcement for asphalt mixture	123240
Gao, Danying / Li, Wenbin / Pang, Yuyang / Huang, Yunchao	Behavior analysis and strength prediction of steel fiber reinforced recycled aggregate concrete column under axial compression	123278
Zhai, Wenzhou / Wang, Chunyu / Yao, Xiao / Dai, Dan / Wang, Liuyu / Geng, Chenzi / Wu, Xuechao / Hua, Sudong	Characteristics of polycarboxylate-based dispersant suitable for medium and low temperature oil well cementing	123239
Zhang, Xuhao / Chen, Bing / Ahmad, Muhammad Riaz	Characterization of a novel bio-insulation material for multilayer wall and research on hysteresis effect	123162
Mehdinejad, Sasan / Fazaeli, Hassan / Moniri, Ali / Dabiri, Asma Sadat	Comparison of two criteria of stress intensity factor and fracture energy to investigate the behavior of asphalt mixtures under combined tensile-shear loading modes-A statistical approach	123230
Liu, Hongling / He, Huanyu / Li, Yang / Hu, Taotao / Ni, Hongwei / Zhang, Hua	Coupling effect of steel slag in preparation of calcium-containing geopolymers with spent fluid catalytic cracking (FCC) catalyst	123194
Zárybnická, Lucie / Machotová, Jana / Mácová, Petra / Machová, Dita / Viani, Alberto	Design of polymeric binders to improve the properties of magnesium phosphate cement	123202
Chen, Shengli / Zhang, Jinlong / Sun, Shenmei / Zhong, Kaihong / Shao, Qiang / Xu, Haijun / Huang, Haoliang / Wei, Jiangxiong	Dispersion, fluidity retention and retardation effect of polyacrylate-based ether superplasticizer nanomicelles in Portland cement	123149
Baz, Bilal / Aouad, Georges / Kleib, Joelle / Bulteel, David / Remond, Sébastien	Durability assessment and microstructural analysis of 3D printed concrete exposed to sulfuric acid environments	123220
Lei, Zhen / Li, Zhipeng / Zhang, Xiang / Shi, Xianming	Durability of CFRP-wrapped concrete in cold regions: A laboratory evaluation of montmorillonite nanoclay-modified siloxane epoxy adhesive	123253
Du, Jianhuan / Ren, Dongya / Ai, Changfa / Zhang, Jiakang / Qiu, Yanjun	Effect of aggregate gradation on crack propagation in asphalt mixtures at low temperatures based on the Eshelby equivalent inclusion theory	123181
Rais, Mohd Salman / Ahmad Khan, Rizwan	Effect of biomineralization technique on the strength and durability characteristics of recycled aggregate concrete	123280
Wu, Shuang / Yao, Xingliang / Ren, Changzai / Yao, Yonggang / Zhang, Chao / Wu, Changliang / Wang, Wenlong	Effect of iron on the preparation of iron-rich calcium sulfoatablluminate cement using gypsum as the sole calcium oxide source and its incorporation into mineral phases	123214
Shah, Syed Nasir / Mo, Kim Hung / Yap, Soon Poh / Radwan, Mohammed K. H.	Effect of micro-sized silica aerogel on the properties of lightweight cement composite	123229
Li, Ye	Effect of post-fire curing and silica fume on permeability of ultra-high performance concrete	123175
Ouyang, Gaoshang / Wu, Lianjie / Ye, Chuxiong / Wang, Jingsong / Dong, Teng	Effect of silane coupling agent on the rheological and mechanical properties of alkali-activated ultrafine metakaolin based geopolymers	123223
Serag Faried, A. / Mostafa, Sahar A. / Tayeh, Bassam A. / Tawfik, Taher A.	The effect of using nano rice husk ash of different burning degrees on ultra-high-performance concrete properties	123279
Shirmohammadi, Maryam / Leggate, William / Redman, Adam	Effects of moisture ingress and egress on the performance and service life of mass timber products in buildings: a review	123176
Karvan, Poorya / Razavi, Seyed Mohammad Javad / Berto, Filippo / Bertolin, Chiara	Energy density and fracture parameters of coated Scots pine	123206
Du, Jianhuan / Rahman, Ali / Zhou, Zhengfeng / Ai, Changfa / Qiu, Yanjun	Enhancement effect of the aggregate particles on the low-temperature cracking resistance of the asphalt mortar	123225
Huang, Jiandong / Zhang, Yi / Sun, Yuantian / Ren, Jiaolong / Zhao, Zedong / Zhang, Junfei	Evaluation of pore size distribution and permeability reduction behavior in pervious concrete	123228
Chen, Weihong / Feng, Kai / Wang, Ying / Lin, Yiwang / Qian, Hui	Evaluation of self-healing performance of a smart composite material (SMA-ECC)	123216
Ould Ouali, M. / Poorsolhjouy, P. / Placidi, L. / Misra, A.	Evaluation of the effects of stress concentrations on plates using granular micromechanics	123227
Gul, Muhammad Aniq / Khan, Kaffayatullah / Islam, Md. Kamrul / Shalabi, Faisal I. / Ozer, Hasan / Hajj, Ramez / Bhasin, Amit	Evaluation of various factors affecting mix design of sulfur-extended asphalt mixes	123199
You, Weijie / Liu, Xiaoyang / Shang, Huaishuai / Yang, Guotao	Evolution of temperature, humidity and deformation in early-age cement-based materials based on a multi-field model	123277
Ahmad, Muhammad Riaz / Chen, Bing / Dai, Jian-Guo / Kazmi, Syed Minhaj Saleem / Munir, Muhammad Junaid	Evolutionary artificial intelligence approach for performance prediction of bio-composites	123254
Nie, Yatong / Karimi-Nobandegani, Amir / Valipour, Hamid R.	Experimental behaviour and numerical modelling of timber-timber composite (TTC) joints	123273
Li, Fan / Yang, Yuyou	Experimental investigation on the influence of interfacial effects of limestone and fly ash filler particles in asphalt binder on mastic aging behaviors	123184
Li, Lijuan / Mai, Guanghao / He, Shaohua / Xiong, Zhe / Wei, Wei / Luo, Hanwei / Liu, Feng	Experimental study on bond behaviour between recycled aggregate concrete and basalt fibre-reinforced polymer bars under different strain rates	123218
Ma, Jianfeng / Shang, Yazhuo / Peng, Changjun / Liu, Honglai / Zheng, Shuzhen / Yan, Han / Ran, Qianping	Foam and rheological behavior of polydentate phosphonate-modified polymers under cement system	123205
Prakash, R. / Raman, Sudharshan N. / Divyah, N. / Subramanian, C. / Vijayaprabha, C. / Praveenkumar, S.	Fresh and mechanical characteristics of roselle fibre reinforced self-compacting concrete incorporating fly ash and metakaolin	123209
Kuo, Chihping	Ground-penetrating radar to investigate mud pumping distribution along a railway line	123104
Dener, Murat / Karatas, Mehmet / Mohabbi, Mehrzad	High temperature resistance of self compacting alkali activated slag/portland cement composite using lightweight aggregate	123250
Königsberger, Markus / Honorio, Tulio / Sanahuja, Julien / Delsaute, Brice / Pichler, Bernhard L. A.	Homogenization of nonaging basic creep of cementitious materials: A multiscale modeling benchmark	123144
Huang, Huanghuang / Gao, Xiaojian / Khayat, Kamal H. / Su, Anshuang	Influence of fiber alignment and length on flexural properties of UHPC	122863
Briceño, C. / Noel, M. F. / Chácara, C. / Aguilar, R.	Integration of non-destructive testing, numerical simulations, and simplified analytical tools for assessing the structural performance of historical adobe buildings	123224
Scuro, C. / Lamonaca, F. / Porzio, S. / Milani, G. / Olivito, R. S.	Internet of Things (IoT) for masonry structural health monitoring (SHM): Overview and examples of innovative systems	123092
Saleem, Muhammad / Hosoda, Akira	Latin Hypercube Sensitivity Analysis and Non-destructive Test to Evaluate the Pull-out Strength of Steel Anchor Bolts Embedded in Concrete	123256
Apostolopoulou, Maria / Bakolas, Asterios / Kotsainas, Meletis	Mechanical and physical performance of natural hydraulic lime mortars	123272
Bai, Yuxia / Liu, Jin / Cui, Yujun / Shi, Xiao / Song, Zezhuo / Qi, Changqing	Mechanical behavior of polymer stabilized sand under different temperatures	123237
He, Jianqiang / Wang, Qing / Yao, Boyu / Ho, Johnny	Mechanical properties of high strength POM-FRCC and its performance under elevated temperatures	123177
Wang, Wenzhen / Shen, Aiqin / He, Ziming / Guo, Yinchuan / Li, Desheng	Mechanism and erosion resistance of internally cured concrete including super absorbent polymers against coupled effects of acid rain and fatigue load	123252
Mikowski, Alexandre / Casali, Rafael Machado / Soares, Paulo / da Silva, Wyllian Bezerra / Barra, Breno Salgado	Methodology for error propagation analysis of the complex stiffness modulus of asphalt mixes	123156
Wang, Xiaomeng / Petrů, Michal / Xia, Linxiang	Modeling the dynamics behavior of flax fiber reinforced composite after water aging using a modified Huet-Sayegh viscoelastic model with fractional derivatives	122879
Chen, Yanqiang / Qian, Chunxiang	A new method for anti-efflorescence of mortar by bio-mineralization	123261
Wang, Hailong / Chen, Zhiwei / Sun, Xiaoyan / Zhang, Jian / Zheng, Jianjun	New numerical method for predicting chloride diffusivity of concrete considering the profiles of practical aggregates	123245
Qing Wang, Li / Feng Su, Jun / Gao, Xu	Observation of the microstructure and shape of self-healing microvascular in asphalt	123259
Iskander, Mina / Shrive, Nigel	On the fracture of brittle and quasi-brittle materials subject to uniaxial compression and the interaction of voids on cracking	123217
Wang, Chaohui / Fan, Zhentong / Li, Changhui / Zhang, Haijiao / Xiao, Xudang	Preparation and engineering properties of low-viscosity epoxy grouting materials modified with silicone for microcrack repair	123270
Luo, Kai / Li, Jun / Lu, Zhongyuan / Wang, Liuyu / Deng, Xin / Hou, Li / Jiang, Jun	Preparation and performances of foamed hydraulic lime	123244
Liu, Jian / Wu, Chengqing / Li, Jun / Liu, Zhongxian / Xu, Shenchun / Liu, Kai / Su, Yu / Fang, Jianguang / Chen, Gang	Projectile impact resistance of fibre-reinforced geopolymer-based ultra-high performance concrete (G-UHPC)	123189
Lin, Weiqing / Zhou, Fangyuan / Luo, Wenjun / You, Lingyun	Recycling the waste dolomite powder with excellent consolidation properties: Sample synthesis, mechanical evaluation, and consolidation mechanism analysis	123198
Zheng, Yu / Wang, Chong / Zhou, Shuai / Luo, Chaoqun	The self-gelation properties of calcined wollastonite powder	123061
Picazo, A. / Alberti, M. G. / Gálvez, J. C. / Enfedaque, A.	Shear slip post-cracking behaviour of polyolefin and steel fibre reinforced concrete	123187
Lin, H. / Liu, F. Y. / Lourenço, S. D. N. / Schwantes, G. / Trumpf, S. / Holohan, D. / Beckett, C. T. S.	Stabilization of an earthen material with Tung oil: compaction, strength and hydrophobic enhancement	123213
Ji, Xiaoping / Chen, Yun / Hou, Yueqin / Dai, Cong / Chen, Bo / Zou, Haiwei	Surface microscopic properties of various aggregates using laser scanning confocal microscope	123222
Xu, Fucheng / Zhang, Haiyang / Wu, Jianguo	Synergistic catalytic flame retardant effect of zirconium phosphate on the poplar plywood	123208
Balan, L. Anjali / Anupam, B. R. / Sharma, Sunil	Thermal and mechanical performance of cool concrete pavements containing waste glass	123238
Zhao, Lixiao / Feng, Pan / Shao, Lijing / Ye, Shaoxiong / Liu, Xin	Using viscosity modifying admixture to reduce diffusion in cement-based materials: Effect of molecular mass	123207
Zheng, Juanrong / Tang, Yu / Feng, Hu	Utilization of low-alkalinity binders in cemented paste backfill from sulphide-rich mine tailings	123221
Wu, Huixia / Yang, Dingyi / Xu, Jianguang / Liang, Chaofeng / Ma, Zhiming	Water transport and resistance improvement for the cementitious composites with eco-friendly powder from various concrete wastes	123247

Über diese
Datenseite
IssueID
66180
Veröffentlicht am:
17.06.2022
Geändert am:
20.06.2024

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - Juli 2021

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - Juli 2021

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.