Construction and Building Materials - Juni 2022

Erschienen:	Juni 2022

Autor(en)	Titel	Seite(n)
Moeini, Mohammad Amin / Hosseinpoor, Masoud / Yahia, Ammar	3D printing of cement-based materials with adapted buildability	127614
Wang, Wei / Jin, Feng / Wang, Bohao / Wang, Gang / Huang, Duruo / Cui, Chunyang	Adhesion behavior and deposition morphology of cement grout flowing through granular materials	127547
Molod, Mohammad Amin / Spyridis, Panagiotis / Barthold, Franz-Joseph	Applications of shape memory alloys in structural engineering with a focus on concrete construction – A comprehensive review	127565
Saruhan, Vedat / Keskinateş, Muhammer / Felekoğlu, Burak	A comprehensive review on fresh state rheological properties of extrusion mortars designed for 3D printing applications	127629
Wang, Xu / Hu, Shaowei / Li, Wenhao / Hu, Yuquan	Corrosion monitoring for prestressed concrete cylinder pipe spigot with combined use of Tafel extrapolation and surface acoustic wave methods	127572
Wang, Lining / Aslani, Farhad / Mukherjee, Abhijit	Development of 3D printable self-sensing cementitious composites	127601
Castillo-Mingorance, J. M. / Sol-Sánchez, M. / Mattinzioli, T. / Moreno-Navarro, F. / Rubio-ámez, M. C.	Development of rail pads from recycled polymers for ballasted railway tracks	127479
Yang, Kai / Li, Rui / Underwood, B. Shane / Castorena, Cassie	Effect of laboratory oxidative aging on dynamic shear rheometer measures of asphalt binder fatigue cracking resistance	127566
Gönen, Semih / Pulatsu, Bora / Erdogmus, Ece / Lourenço, Paulo B. / Soyoz, Serdar	Effects of spatial variability and correlation in stochastic discontinuum analysis of unreinforced masonry walls	127511
Zhang, Jian / Wang, Hai-Long / Chen, Zhi-Wei / Liu, Qing-feng / Sun, Xiao-Yan / Zheng, Jian-Jun	Experimental investigation and numerical simulation for chloride diffusivity of cement paste with elliptical cement particles	127616
Li, Qingtao / Xia, Haoran / Yuan, Guanglin / Shu, Qianjin	Experimental study on the free expansion deformation of concrete during the cooling process after being heated to high temperature	127617
Nasir Ayaz Khan, M. / Yaqub, M. / Malik, Azhar H.	High density concrete incorporating grit scale aggregates for 4th generation nuclear power plants	127578
Islam, Md. Jahidul / Islam, Kamrul / Shahjalal, Md. / Khatun, Ehsani / Islam, Somaiya / Razzaque, Anika Binte	Influence of different types of fibers on the mechanical properties of recycled waste aggregate concrete	127577
Davoodi, Asieh / Aboutalebi Esfahani, Mohsen / Bayat, Meysam / Mohammadyan-Yasouj, Seyed Esmaeil / Rahman, Ali	Influence of nano-silica modified rubber mortar and EVA modified porous asphalt on the performance improvement of modified semi-flexible pavement	127573
Yalcin, Erkut / Munir Ozdemir, Ahmet / Vural Kok, B. / Yilmaz, Mehmet / Yılmaz, Bahadır	Influence of pandemic waste face mask on rheological, physical and chemical properties of bitumen	127576
Dąbrowski, Mariusz / Jóźwiak-Niedźwiedzka, Daria / Bogusz, Karolina / Glinicki, Michał A.	Influence of serpentinite aggregate on the microstructure and durability of radiation shielding concrete	127536
Ren, Shisong / Liu, Xueyan / Lin, Peng / Erkens, Sandra	Influence of swelling-degradation degree on rheological properties, thermal pyrolysis kinetics, and emission components of waste crumb rubber modified bitumen	127555
Pozo-Antonio, J. S. / Otero, J. / González, N.	The influence of using wet cellulose poultice on nanolime consolidation treatments applied on a limestone	127615
Liu, Kai-Hua / Zheng, Jia-Kai / Pacheco-Torgal, Fernando / Zhao, Xin-Yu	Innovative modeling framework of chloride resistance of recycled aggregate concrete using ensemble-machine-learning methods	127613
Zheng, Yuchao / Yang, Jianfeng / Liao, Baolin / Ma, Shuqi / Zhong, Heng / Lei, Jianyong	Investigation on the concrete strength performance of underlying tunnel structure subjected to train-induced dynamic loads at an early age	127622
Nikbin, Iman M. / Dezhampanah, Soudabeh / Charkhtab, Shahin / Mehdipour, Sadegh / Shahvareh, Iman / Ebrahimi, Mahdi / Pournasir, Ahmad / Pourghorban, Hasan	Life cycle assessment and mechanical properties of high strength steel fiber reinforced concrete containing waste PET bottle	127553
Meng, Fanzhen / Song, Jie / Wang, Xiaoshan / Yue, Zhufeng / Zhou, Xiong / Wang, Zaiquan	Mechanical behavior of non-persistent joints with different geometric configurations and roughness in solid rock and concrete material	127564
Chen, Peng / Liu, Jinxi / Cui, Xiaomeng / Si, Shengpu	Mesoscale analysis of concrete under axial compression	127580
Wang, Ying / Lu, Yi / Liu, Jin / Ma, Xiaofan / Qi, Changqing / Chen, Zhihao	Monitoring and characterization of the polymer-filled pores in sand using nuclear magnetic resonance during air-drying	127568
Ameli, Zahra / D'Antino, Tommaso / Carloni, Christian	A new predictive model for FRCM-confined columns: A reflection on the composite behavior at peak stress	127534
Bardhan, Abidhan / Biswas, Rahul / Kardani, Navid / Iqbal, Mudassir / Samui, Pijush / Singh, M. P. / Asteris, Panagiotis G.	A novel integrated approach of augmented grey wolf optimizer and ANN for estimating axial load carrying-capacity of concrete-filled steel tube columns	127454
Kursuncu, Bilal / Gencel, Osman / Bayraktar, Oguzhan Yavuz / Shi, Jinyan / Nematzadeh, Mahdi / Kaplan, Gökhan	Optimization of foam concrete characteristics using response surface methodology and artificial neural networks	127575
Jeon, Dongho / Jung, Jahe / Park, Jisun / Min, Jiyoung / Oh, Jae Eun / Moon, Juhyuk / Lee, Jong-Suk / Yoon, Seyoon	Predicting airborne chloride deposition in marine bridge structures using an artificial neural network model	127623
Aela, Peyman / Wang, Junyi / Yousefian, Kaveh / Fu, Hao / Yin, Zhen-Yu / Jing, Guoqing	Prediction of crushed numbers and sizes of ballast particles after breakage using machine learning techniques	127469
Li, Lin / Jiang, Tao / Chen, Bojian / Wen, Jing / Yang, Guangdong	Preparation and properties of foamed cement for lightweight thermal insulation with Ti-extraction blast furnace slag and sulfoaluminate cement by chemical foaming	127634
Nikvar-Hassani, Arash / Hodges, Renee / Zhang, Lianyang	Production of green bricks from low-reactive copper mine tailings: Durability and environmental aspects	127571
Kim, Ji-Hyun / Park, Sung-Hwan / Chung, Chul-Woo	The Properties of Cement Paste Incorporating Multi Wall Carbon Nanotube Solution Prepared through Bead Mill and High-Pressure Homogenizer Process with Polycarboxylate Ester	127598
Song, Qingnan / Wang, Qing / Xu, Shuangshuang / Mao, Junheng / Li, Xiaodong / Zhao, Yayun	Properties of water-repellent concrete mortar containing superhydrophobic oyster shell powder	127423
Zhao, Zenggang / Wu, Shaopeng / Liu, Quantao / Xie, Jun / Yang, Chao / Wang, Fusong / Wan, Pei	Recycling waste disposable medical masks in improving the performance of asphalt and asphalt mixtures	127621
Li, Hongwen / Li, Yue / Jin, Caiyun / Liu, Yunze / Li, Yaqiang	The role of multi-walled carbon nanotubes for improving C-S-H creep property: An insight from atomic force microscope and nuclear magnetic resonance	127463
Ke, Guoju / Zhang, Jun / Liu, Yuzhang	Shrinkage characteristics of calcium sulphoaluminate cement concrete	127627
Han, Xiaojian / Zhao, Zhicheng / Chen, Lingkun / Hu, Xiaolun / Tian, Yuan / Zhai, Chencheng / Wang, Lu / Huang, Xiaoming	Structural damage-causing concrete cracking detection based on a deep-learning method	127562
Da, Yongqi / He, Tingshu / Shi, Chen	Unveiling the cooperation effects of fluorine and copper on tricalcium silicate (C3S) during cement kiln co-processing hazardous wastes containing Cu	127612
Wang, Xianzhi / Xu, Jing / Wang, Zhongping / Yao, Wu	Use of recycled concrete aggregates as carriers for self-healing of concrete cracks by bacteria with high urease activity	127581
Katzer, Jacek / Skoratko, Aneta	Using 3D printed formworks for the creation of steel fibre reinforced concrete-plastic columns	127586
Al-Sabaeei, Abdulnaser M. / Al-Fakih, Amin / Noura, Sajjad / Yaghoubi, Ehsan / Alaloul, Wesam / Al-Mansob, Ramez A. / Khan, Muhammad Imran / Aliyu Yaro, Nura Shehu	Utilization of palm oil and its by-products in bio-asphalt and bio-concrete mixtures: A review	127552

Autor(en)

Titel

Seite(n)

Moeini, Mohammad Amin / Hosseinpoor, Masoud / Yahia, Ammar

3D printing of cement-based materials with adapted buildability

127614

Wang, Wei / Jin, Feng / Wang, Bohao / Wang, Gang / Huang, Duruo / Cui, Chunyang

Adhesion behavior and deposition morphology of cement grout flowing through granular materials

127547

Molod, Mohammad Amin / Spyridis, Panagiotis / Barthold, Franz-Joseph

Applications of shape memory alloys in structural engineering with a focus on concrete construction – A comprehensive review

127565

Saruhan, Vedat / Keskinateş, Muhammer / Felekoğlu, Burak

A comprehensive review on fresh state rheological properties of extrusion mortars designed for 3D printing applications

127629

Wang, Xu / Hu, Shaowei / Li, Wenhao / Hu, Yuquan

Corrosion monitoring for prestressed concrete cylinder pipe spigot with combined use of Tafel extrapolation and surface acoustic wave methods

127572

Wang, Lining / Aslani, Farhad / Mukherjee, Abhijit

Development of 3D printable self-sensing cementitious composites

127601

Castillo-Mingorance, J. M. / Sol-Sánchez, M. / Mattinzioli, T. / Moreno-Navarro, F. / Rubio-ámez, M. C.

Development of rail pads from recycled polymers for ballasted railway tracks

127479

Yang, Kai / Li, Rui / Underwood, B. Shane / Castorena, Cassie

Effect of laboratory oxidative aging on dynamic shear rheometer measures of asphalt binder fatigue cracking resistance

127566

Gönen, Semih / Pulatsu, Bora / Erdogmus, Ece / Lourenço, Paulo B. / Soyoz, Serdar

Effects of spatial variability and correlation in stochastic discontinuum analysis of unreinforced masonry walls

127511

Zhang, Jian / Wang, Hai-Long / Chen, Zhi-Wei / Liu, Qing-feng / Sun, Xiao-Yan / Zheng, Jian-Jun

Experimental investigation and numerical simulation for chloride diffusivity of cement paste with elliptical cement particles

127616

Li, Qingtao / Xia, Haoran / Yuan, Guanglin / Shu, Qianjin

Experimental study on the free expansion deformation of concrete during the cooling process after being heated to high temperature

127617

Nasir Ayaz Khan, M. / Yaqub, M. / Malik, Azhar H.

High density concrete incorporating grit scale aggregates for 4th generation nuclear power plants

127578

Islam, Md. Jahidul / Islam, Kamrul / Shahjalal, Md. / Khatun, Ehsani / Islam, Somaiya / Razzaque, Anika Binte

Influence of different types of fibers on the mechanical properties of recycled waste aggregate concrete

127577

Davoodi, Asieh / Aboutalebi Esfahani, Mohsen / Bayat, Meysam / Mohammadyan-Yasouj, Seyed Esmaeil / Rahman, Ali

Influence of nano-silica modified rubber mortar and EVA modified porous asphalt on the performance improvement of modified semi-flexible pavement

127573

Yalcin, Erkut / Munir Ozdemir, Ahmet / Vural Kok, B. / Yilmaz, Mehmet / Yılmaz, Bahadır

Influence of pandemic waste face mask on rheological, physical and chemical properties of bitumen

127576

Dąbrowski, Mariusz / Jóźwiak-Niedźwiedzka, Daria / Bogusz, Karolina / Glinicki, Michał A.

Influence of serpentinite aggregate on the microstructure and durability of radiation shielding concrete

127536

Ren, Shisong / Liu, Xueyan / Lin, Peng / Erkens, Sandra

Influence of swelling-degradation degree on rheological properties, thermal pyrolysis kinetics, and emission components of waste crumb rubber modified bitumen

127555

Pozo-Antonio, J. S. / Otero, J. / González, N.

The influence of using wet cellulose poultice on nanolime consolidation treatments applied on a limestone

127615

Liu, Kai-Hua / Zheng, Jia-Kai / Pacheco-Torgal, Fernando / Zhao, Xin-Yu

Innovative modeling framework of chloride resistance of recycled aggregate concrete using ensemble-machine-learning methods

127613

Zheng, Yuchao / Yang, Jianfeng / Liao, Baolin / Ma, Shuqi / Zhong, Heng / Lei, Jianyong

Investigation on the concrete strength performance of underlying tunnel structure subjected to train-induced dynamic loads at an early age

127622

Nikbin, Iman M. / Dezhampanah, Soudabeh / Charkhtab, Shahin / Mehdipour, Sadegh / Shahvareh, Iman / Ebrahimi, Mahdi / Pournasir, Ahmad / Pourghorban, Hasan

Life cycle assessment and mechanical properties of high strength steel fiber reinforced concrete containing waste PET bottle

127553

Meng, Fanzhen / Song, Jie / Wang, Xiaoshan / Yue, Zhufeng / Zhou, Xiong / Wang, Zaiquan

Mechanical behavior of non-persistent joints with different geometric configurations and roughness in solid rock and concrete material

127564

Chen, Peng / Liu, Jinxi / Cui, Xiaomeng / Si, Shengpu

Mesoscale analysis of concrete under axial compression

127580

Wang, Ying / Lu, Yi / Liu, Jin / Ma, Xiaofan / Qi, Changqing / Chen, Zhihao

Monitoring and characterization of the polymer-filled pores in sand using nuclear magnetic resonance during air-drying

127568

Ameli, Zahra / D'Antino, Tommaso / Carloni, Christian

A new predictive model for FRCM-confined columns: A reflection on the composite behavior at peak stress

127534

Bardhan, Abidhan / Biswas, Rahul / Kardani, Navid / Iqbal, Mudassir / Samui, Pijush / Singh, M. P. / Asteris, Panagiotis G.

A novel integrated approach of augmented grey wolf optimizer and ANN for estimating axial load carrying-capacity of concrete-filled steel tube columns

127454

Kursuncu, Bilal / Gencel, Osman / Bayraktar, Oguzhan Yavuz / Shi, Jinyan / Nematzadeh, Mahdi / Kaplan, Gökhan

Optimization of foam concrete characteristics using response surface methodology and artificial neural networks

127575

Jeon, Dongho / Jung, Jahe / Park, Jisun / Min, Jiyoung / Oh, Jae Eun / Moon, Juhyuk / Lee, Jong-Suk / Yoon, Seyoon

Predicting airborne chloride deposition in marine bridge structures using an artificial neural network model

127623

Aela, Peyman / Wang, Junyi / Yousefian, Kaveh / Fu, Hao / Yin, Zhen-Yu / Jing, Guoqing

Prediction of crushed numbers and sizes of ballast particles after breakage using machine learning techniques

127469

Li, Lin / Jiang, Tao / Chen, Bojian / Wen, Jing / Yang, Guangdong

Preparation and properties of foamed cement for lightweight thermal insulation with Ti-extraction blast furnace slag and sulfoaluminate cement by chemical foaming

127634

Nikvar-Hassani, Arash / Hodges, Renee / Zhang, Lianyang

Production of green bricks from low-reactive copper mine tailings: Durability and environmental aspects

127571

Kim, Ji-Hyun / Park, Sung-Hwan / Chung, Chul-Woo

The Properties of Cement Paste Incorporating Multi Wall Carbon Nanotube Solution Prepared through Bead Mill and High-Pressure Homogenizer Process with Polycarboxylate Ester

127598

Song, Qingnan / Wang, Qing / Xu, Shuangshuang / Mao, Junheng / Li, Xiaodong / Zhao, Yayun

Properties of water-repellent concrete mortar containing superhydrophobic oyster shell powder

127423

Zhao, Zenggang / Wu, Shaopeng / Liu, Quantao / Xie, Jun / Yang, Chao / Wang, Fusong / Wan, Pei

Recycling waste disposable medical masks in improving the performance of asphalt and asphalt mixtures

127621

Li, Hongwen / Li, Yue / Jin, Caiyun / Liu, Yunze / Li, Yaqiang

The role of multi-walled carbon nanotubes for improving C-S-H creep property: An insight from atomic force microscope and nuclear magnetic resonance

127463

Ke, Guoju / Zhang, Jun / Liu, Yuzhang

Shrinkage characteristics of calcium sulphoaluminate cement concrete

127627

Han, Xiaojian / Zhao, Zhicheng / Chen, Lingkun / Hu, Xiaolun / Tian, Yuan / Zhai, Chencheng / Wang, Lu / Huang, Xiaoming

Structural damage-causing concrete cracking detection based on a deep-learning method

127562

Da, Yongqi / He, Tingshu / Shi, Chen

Unveiling the cooperation effects of fluorine and copper on tricalcium silicate (C3S) during cement kiln co-processing hazardous wastes containing Cu

127612

Wang, Xianzhi / Xu, Jing / Wang, Zhongping / Yao, Wu

Use of recycled concrete aggregates as carriers for self-healing of concrete cracks by bacteria with high urease activity

127581

Katzer, Jacek / Skoratko, Aneta

Using 3D printed formworks for the creation of steel fibre reinforced concrete-plastic columns

127586

Al-Sabaeei, Abdulnaser M. / Al-Fakih, Amin / Noura, Sajjad / Yaghoubi, Ehsan / Alaloul, Wesam / Al-Mansob, Ramez A. / Khan, Muhammad Imran / Aliyu Yaro, Nura Shehu

Utilization of palm oil and its by-products in bio-asphalt and bio-concrete mixtures: A review

127552

Anzeige

Construction and Building Materials - Juni 2022

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - Juni 2022

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.