Construction and Building Materials - März 2022

Erschienen:	März 2022

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Ma, Guowei / Ruhan, A. / Xie, Panpan / Pan, Zhu / Wang, Li / Hower, James C.	3D-printable aerogel-incorporated concrete: Anisotropy influence on physical, mechanical, and thermal insulation properties	126551
Dorn, Tobias / Blask, Oliver / Stephan, Dietmar	Acceleration of cement hydration – A review of the working mechanisms, effects on setting time, and compressive strength development of accelerating admixtures	126554
Caron, Richard / Patel, Ravi A. / Dehn, Frank	Activation kinetic model and mechanisms for alkali-activated slag cements	126577
Solak, Afonso Miguel / Tenza-Abril, Antonio José / Eugenia García-Vera, Victoria	Adopting an image analysis method to study the influence of segregation on the compressive strength of lightweight aggregate concretes	126594
Wang, Qiong / Meng, Yuhong / Su, Wei / Ye, Weimin / Chen, Yonggui	Analyzing of the hydration crack evolution in compacted GMZ bentonite with consideration of technological void ratio	126399
Liu, Zhen / Wang, Siyao / Gu, Xingyu / Li, Zhigang / Dong, Qiao / Cui, Bingyan	Application of a novel EWMA-ϕ chart on quality control in asphalt mixtures production	126264
Navacerrada, M. A. / Barbero-Barrera, M. M. / Fort, R. / de la Prida, D. / Núñez, J. C. / Gómez, T. S.	Application of acoustic impedance gun to non-destructively monitor stone damage	126510
Zahedi, Andisheh / F M Sanchez, Leandro / Noël, Martin	Appraisal of visual inspection techniques to understand and describe ASR-induced development under distinct confinement conditions	126549
Liu, Guoqiang / Han, Dongdong / Jia, Yanshun / Zhao, Yongli	Asphalt mixture skeleton main force chains composition criteria and characteristics evaluation based on discrete element methods	126313
Aktas, Muharrem / Kiziltoprak, Nihat / Avci, Halil Ibrahim / Schneider, Jens	Bearing-strength of paper laminates in single bolt connections	126462
Martins, M. A. B. / Silva, L. R. R. / Kuffner, B. H. B. / Barros, R. M. / Melo, M. L. N. M.	Behavior of high strength self-compacting concrete with marble/granite processing waste and waste foundry exhaust sand, subjected to chemical attacks	126492
Pereiro-Barceló, Javier / Bonet, José L. / Rueda-García, Lisbel / Ciurana-Tatay, Álvaro	Behaviour of retrofited precast UHPC and Ni-Ti SMA column-to-foundation connection with CFRP wrapping layers	126536
Hua, Jianmin / Yang, Zhengtao / Xue, Xuanyi / Huang, Lepeng / Wang, Neng / Chen, Zengshun	Bond properties of bimetallic steel bar in seawater sea-sand concrete at different ages	126539
Chen, Yu / Zheng, Wenhua / Xu, Shibing / Tebaldi, Gabriele / Su, Yu-Min	Characteristics of mineral fillers and their effects on mastic fracture resistance at intermediate temperature 20 ℃	126568
Li, Jingruo / Tang, Boming / Liu, Ruiquan / Xu, Zhoucong / Xu, Pei / Zhou, Qiwei / Wen, Yonglin / Zhong, Cheng	Characteristics of MSWI fly ash and its resource transformation by road engineering: Mechanical and environmental considerations	126575
Yue, Yanchao / Abdelsalam, Moustafa / Khater, Ahmed / Ghazy, Mohamed	A comparative life cycle assessment of asphalt mixtures modified with a novel composite of diatomite powder and lignin fiber	126608
Al-Hosainat, Ahmad / Nazzal, Munir D. / Abu Talha, Sk / Kim, Sang-Soo / Abbas, Ala / Mohammad, Louay	A comprehensive laboratory evaluation of the factors affecting the Micro-Surfacing interlayer bond strength	126538
Alqarni, Ali S.	A comprehensive review on properties of sustainable concrete using volcanic pumice powder ash as a supplementary cementitious material	126533
Nie, Yuhan / Wei, Yang / Zhao, Kang / Ding, Mingmin / Huang, Linjie	Compressive performance of bamboo sheet twining tube-confined recycled aggregate concrete columns	126544
Wang, Zheng-fang / Yu, Yan-fei / Wang, Jing / Zhang, Jian-qing / Zhu, Hong-liang / Li, Peng / Xu, Lei / Jiang, Hao-nan / Sui, Qing-mei / Jia, Lei / Chen, Jiang-ping	Convolutional neural-network-based automatic dam-surface seepage defect identification from thermograms collected from UAV-mounted thermal imaging camera	126416
Yu, Wenxuan / Jin, Liu / Du, Xiuli / Chen, Fengjuan	Coupling influence of low strain rate and structural size on splitting-failure of concrete: Tests and Mechanism analysis	126641
Ouyang, Xue / Wu, Zemei / Shan, Bo / Chen, Qing / Shi, Caijun	A critical review on compressive behavior and empirical constitutive models of concrete	126572
Li, Pengfei / Jiang, Wei / Lu, Rong / Yuan, Dongdong / Shan, Jinhuan / Xiao, Jingjing	Design and durability of PZT/PVDF composites based on pavement perception	126621
Xin, Zhenbo / Zhang, Houjiang / Guan, Cheng / Liu, Jinhao / Liu, Fenglu / Gong, Yingchun / Li, Huan / Shen, Yinlan	Determining elastic constants of full-size cross laminated timber panel supported on four nodes using a vibration method	126513
Ou, Zhihua / Feng, Ruiping / Li, Fangtao / Liu, Guang / Li, Ning	Development of drying shrinkage model for alkali-activated slag concrete	126556
Wang, Xing / Shan, Yi / Cui, Jie / Zhong, Yu / Shen, Jian-Hua / Wang, Xin-Zhi / Zhu, Chang-Qi	Dilatancy of the foundation filling material of island-reefs in the South China Sea	126524
Vaddy, Poornachandra / Pandurangan, Venkataraman / Biligiri, Krishna Prapoorna	Discrete element method to investigate flexural strength of pervious concrete	126477
Indhumathi, S. / Dinesh, A. / Pichumani, Moorthi	Diverse perspectives on self healing ability of Engineered Cement Composite – All-inclusive insight	126473
Ojeda-Farías, O. / Hebraud, P. / Lootens, D. / Liard, M. / Durán-Herrera, A. / Mendoza-Rangel, J. M.	Dynamics of concentrated white portland cement suspensions using multispeckle diffusing wave spectroscopy	126407
Pan, Zichao / Fang, Xurui / Chen, Airong	Effect of aggregate morphology on physical tortuosity of chloride diffusive path at meso-scale of concrete	126215
Wang, Qiang / Gao, Wenhao / Wang, Zhiming / Lyu, Xianjun	Effect of clam shell from kitchen waste on the synthesis, performance, and hydration of cementitious clinker	126588
Hazoor Ansari, Anwaar / Jakarni, Fauzan Mohd / Muniandy, Ratnasamy / Hassim, Salihudin / Elahi, Zafreen / Meftah Ben Zair, Mohamed	Effect of cup lump rubber as a sustainable bio-modifier on the properties of bitumen incorporating polyphosphoric acid	126505
Xie, Yudong / Qian, Chunxiang / Xu, Yugui / Wei, Ming / Du, Wenxiang	Effect of fine aggregate type on early-age performance, cracking analysis and engineering applications of C50 concrete	126633
Zhang, Suhui / Li, Qiuyi / Yuan, Qiang / Yang, Shangfu / Dai, Xiaodi	Effect of roughness on bonding performance between Portland cement concrete and magnesium phosphate cement concrete	126585
Kumandaş, Aytuğ / Çavdar, Erman / Oruç, Şeref / Pancar, Erhan Burak / Kök, Baha Vural	Effect of WCO addition on high and low-temperature performance of RET modified bitumen	126561
Zhang, Shengchang / Zhong, Tianhaoyue / Xu, Qibin / Su, Zexi / Jiang, Mengjin / Liu, Pengqing	The effects of chemical grafting 1,6-hexanediol diglycidyl ether on the interfacial adhesion between continuous basalt fibers and epoxy resin as well as the tensile strength of composites	126563
Wang, Yingting / Mo, Kim Hung / Du, Hongjian / Ling, Tung-Chai	Effects of CO2 curing treatment on alkali-silica reaction of mortars containing glass aggregate	126637
Alrefaei, Yazan / Dai, Jian-Guo	Effects of delayed addition of polycarboxylate ether on one-part alkali-activated fly ash/slag pastes: Adsorption, reaction kinetics, and rheology	126611
Tong, Kai-wen / Guo, Jian-hua / Zhang, Wei / Li, Shi-chang / Huang, Kang / Chen, Shan-xiong / Yu, Fei / Dai, Zhang-jun	Effects of the interaction between neighboring droplets on the stability of nanoscale liquid bridges	126627
Jazaei, Robabeh / Karakouzian, Moses / O'Toole, Brendan / Moon, Jaeyun / Gharehdaghi, Samad	Energy dissipation capacity of cementitious nanocomposite reinforced by hybrid carbon nanotubes	126396
Tang, Zhen / Li, Guoqiang / Lu, Shuang / Wang, JianPeng / Chi, Lin	Enhance mechanical damping behavior of RHA-cement mortar with bionic inorganic-organic laminated structures	126521
Gu, Xiaobin / Peng, Lihua / Liu, Peng / Bian, Liang / Wei, Boxuan	Enhanced thermal properties and lab-scale thermal performance of polyethylene glycol/modified halloysite nanotube form-stable phase change material cement panel	126550
Tan, Hongbo / Du, Chao / He, Xingyang / Li, Maogao / Zhang, Junjie / Zheng, Zhengqi / Su, Ying / Yang, Jin / Deng, Xiufeng / Wang, Yingbin	Enhancement of compressive strength of high-volume fly ash cement paste by wet grinded cement: Towards low carbon cementitious materials	126458
Tran, Van Quan / Dang, Viet Quoc / Ho, Lanh Si	Evaluating compressive strength of concrete made with recycled concrete aggregates using machine learning approach	126578
Jiao, Bozong / Pan, Baofeng / Che, Tiankai	Evaluating impacts of desulfurization and depolymerization on thermodynamics properties of crumb rubber modified asphalt through molecular dynamics simulation	126360
Zhang, Wengang / Zou, Ling / Chen, Fulei / Yang, Chengxu / Li, Yefan / Yan, Xiang / Zang, Jinhao / Liu, Jianping	Evaluation method of storage stability of SBS modified bitumen based on dynamic rheological properties	126615
Jo, Min-Su / Kim, Hyeong-Gook / Lee, Yong-Jun / Kim, Dong-Hwan / Kim, Kil-Hee	Evaluation of mechanical properties and flexural behavior of FRCM system composed of different types of textile grid and AL powder	126552
Khandelwal, Saurabh / Yop Rhee, Kyong	Evaluation of pozzolanic activity, heterogeneous nucleation, and microstructure of cement composites with modified bentonite clays	126617
Affan, Muhammad / Ali, Majid	Experimental investigation on mechanical properties of jute fiber reinforced concrete under freeze-thaw conditions for pavement applications	126599
Xie, Linlin / Zhong, Bojian / Chen, Xi / Miao, Qisong / Liu, Qianmin / Yang, Cantian / Wang, Xinyu	Experimental investigation on the connection performance of defect detectable and repairable half-grouted sleeve under cyclic loads	126593
Braun, Matthias / Pantscharowitsch, Marc / Kromoser, Benjamin	Experimental investigations on the load-bearing behaviour of traditional and newly developed step joints for timber structures	126557
Wang, Guodong / Ma, Yafei / Guo, Zhongzhao / Bian, Hanbing / Wang, Lei / Zhang, Jianren	Fatigue life assessment of high-strength steel wires: Beach marks test and numerical investigation	126534
Grünhäuser Soares, Erick / Castro-Gomes, João / Sitarz, Mateusz / Zdeb, Tomasz / Hager, Izabela / Hassan, Khaled / Saif Al-Kuwari, Mohammed	Feasibility for co-utilisation of Carbonated Reactive Magnesia Cement (CRMC) and industrial wastes in circular economy and CO2 mineralisation	126488
Cai, Jun / Song, Chen / Gong, Xiangbing / Zhang, Jiupeng / Pei, Jianzhong / Chen, Zongwu	Gradation of limestone-aggregate-based porous asphalt concrete under dynamic crushing test: composition, fragmentation and stability	126532
Bennacer, Rachid / Ma, Xiaoyan	Imbibition or drying dynamics: Controlled by big and small capillaries interconnectivity	126479
Dash, Manoj K. / Patro, Sanjaya K. / Acharya, Prasanna K. / Dash, Mayuresh	Impact of elevated temperature on strength and micro-structural properties of concrete containing water-cooled ferrochrome slag as fine aggregate	126542
Cui, Yunpeng / Wang, Licheng / Liu, Jun / Liu, Runqing / Pang, Bo	Impact of particle size of fly ash on the early compressive strength of concrete: Experimental investigation and modelling	126444
Liao, Gongyun / Fang, Xin / Hu, Jianying / Wang, Hao / Xu, Tao / Chen, Jun	Improving the mechanical performance of poroelastic road surface with low polyurethane content through surface activation	126543
Du, Yi / Habert, Guillaume / Brumaud, Coralie	Influence of tannin and iron ions on the water resistance of clay materials	126571
Fu, Bo / Cheng, Zhenyun / Wang, Dezhi / Li, Ning	Investigation on the utilization of coal gasification slag in Portland cement: Reaction kinetics and microstructure	126587
Sahebzamani, Hamidreza / Alavi, Mohammad Zia / Farzaneh, Orang / Moniri, Ali	Laboratory and field investigation of the effect of polymerized pellets on the fatigue and low-temperature performance of asphalt mixtures	126527
Androjić, Ivica / Dimter, Sanja	Laboratory evaluation of the physical properties of hot mix asphalt exposed to combustion	126569
Lorenzoni, Renata / Nogueira Lima, Victor / Figueiredo, Tathiana Caram S. P. / Hering, Marcus / Paciornik, Sidnei / Curbach, Manfred / Mechtcherine, Viktor / de Andrade Silva, Flávio	Macro and meso analysis of cement-based materials subjected to triaxial and uniaxial loading using X-ray microtomography and digital volume correlation	126558
Yan, Jinghua / Wu, Fengnian / Li, Shusen / Yuan, Jungang / Huang, Yongbo / Wang, Shoude / Zhao, Piqi / Lu, Lingchao / Cheng, Xin	Mechanical and chloride ions solidification performance of C4A3($,P) mineral as promising marine engineering material	126553
Singh, Amardeep / Liu, Qiong / Xiao, Jianzhuang / Lyu, Qifeng	Mechanical and macrostructural properties of 3D printed concrete dosed with steel fibers under different loading direction	126616
Tang, Yuxiang / Xiao, Jianzhuang / Zhang, Hanghua / Duan, Zhenhua / Xia, Bing	Mechanical properties and uniaxial compressive stress-strain behavior of fully recycled aggregate concrete	126546
Qiu, Wenjing / Fu, Shaojun / Zhu, Ji-Hua / Zeng, Chaoqun / Ye, Jianqiao	Meso-scale modelling of the thermo-mechanical response for concrete with complex-shaped aggregates in early age	126485
Xie, Jian / Liu, Yang / Yan, Ming-Liang / Yan, Jia-Bao	Mode Ⅰ fracture behaviors of concrete at low temperatures	126612
Wang, Feng / Xiao, Yue / Chen, Zongwu / Cui, Peide / Liu, Jian / Wang, Ning	Morphological characteristics of mineral filler and their influence on active adhesion between aggregates and bitumen	126520
Matos, Ana Mafalda / Sousa-Coutinho, Joana	Municipal solid waste incineration bottom ash recycling in concrete: Preliminary approach with Oporto wastes	126548
Li, Zhen / Lin, Ludan / Yu, Jincheng / Tang, Hao / Qin, Jihui / Qian, Jueshi	Performance of magnesium silicate hydrate cement modified with dipotassium hydrogen phosphate	126389
Gadkar, Anvit / Subramaniam, Kolluru V. L.	Porosity and pore structure control in cellular geopolymer using rheology and surface tension modifiers	126600
Tian, Cong / Wei, Xiaosheng / Zheng, Zhishan	A practical model for predicting the autogenous shrinkage of cementitious materials	126566
Dao, Dong Van / Bui, Quynh-Anh Thi / Nguyen, Dam Duc / Prakash, Indra / Trinh, Son Hoang / Thai Pham, Binh	Prediction of interlayer shear strength of double-layer asphalt using novel hybrid artificial intelligence models of ANFIS and metaheuristic optimizations	126595
Li, Rui / He, Weilong / Zhang, Jing / Wang, Yu / Zhang, Yu / Nie, Dengpan	Preparation of belite–sulphoaluminate cement using phosphate rock acid-insoluble residue	126573
Li, Wei-Ying / Zhang, Zhi-yuan / Zhou, Jun-Bo	Preparation of building materials from Bayer red mud with magnesium cement	126507
Zheng, Zhao / Bao, Zhitao / Yang, Jun / Cui, Maoxuan / Ma, Xue / Li, Yuxiang	The products transformation and leaching behavior in solidified cement matrices under the coupling actions of “water-heat-chemistry”	126565
Dehghani, Ayoub / Aslani, Farhad / Liu, Yinong	Pullout behaviour of shape memory alloy fibres in self-compacting concrete and its relation to fibre surface microtopography in comparison to steel fibres	126570
Roberto, A. / Mantovani, L. / Romeo, E. / Tebaldi, G. / Montepara, A. / Tribaudino, M.	Re-using Ladle Furnace Steel slags as filler in asphalt mixtures	126420
Kong, Jiafeng / Cong, Ganwen / Ni, Songyuan / Sun, Jiaqing / Guo, Chen / Chen, Mingxu / Quan, Hongzhu	Recycling of waste oyster shell and recycled aggregate in the porous ecological concrete used for artificial reefs	126447
Guo, Zhixiang / Wang, Lan / Feng, Lei / Guo, Yingying	Research on fatigue performance of composite crumb rubber modified asphalt mixture under freeze thaw cycles	126603
Kou, Changjiang / Chen, Zikai / Kang, Aihong / Zhang, Mengyun / Wang, Ruiqi	Rheological behaviors of asphalt binders reinforced by various fibers	126626
Han, Jinsheng / Pan, Jinlong / Cai, Jingming	Self-sensing properties and piezoresistive effect of high ductility cementitious composite	126390
Orosa, P. / Pérez, I. / Pasandín, A. R.	Short-term resilient behaviour and its evolution with curing in cold in-place recycled asphalt mixtures	126559
Heidarnezhad, Fatemeh / Zhang, Qian	Shotcrete based 3D concrete printing: State of art, challenges, and opportunities	126545
Liu, Yang / Wu, Tao / Wei, Hui / Liu, Xi / Pan, Yi	Size effect on tensile strength of lightweight aggregate concrete: A numerical investigation	126541
Hu, Yafei / Li, Keqing / Zhang, Bo / Han, Bin	Strength investigation of the cemented paste backfill in alpine regions using lab experiments and machine learning	126583
Jia, Quanquan / Chen, Wenwu / Tong, Yanmei / Guo, Qinglin	Strength, hydration, and microstructure properties of calcined ginger nut and natural hydraulic lime based pastes for earthen plaster restoration	126606
Woloszyk, Krzysztof / Garbatov, Yordan / Kłosowski, Paweł	Stress–strain model of lower corroded steel plates of normal strength for fitness-for-purpose analyses	126560
Wiesner, Felix / Hadden, Rory / Deeny, Susan / Bisby, Luke	Structural fire engineering considerations for cross-laminated timber walls	126605
Du, Sizhe / Zhang, Yu / Zhang, Jie / Selyutina, Nina / Smirnov, Ivan / Ma, Gang / Zhang, Xiang / Li, Beibei / Miao, Yanchun / Liu, Yuanzhen / Wang, Wenjing	Study on pore characteristics of recycled aggregate concrete mixed with glazed hollow beads at high temperatures based on 3-D reconstruction of computed tomography images	126564
Shang, Huaishuai / Yang, Jiaxing / Huang, Yue / Fan, Liang / Wang, Randuo	Study on the bond behavior of steel bars embedded in concrete under the long-term coupling of repeated loads and chloride ion erosion	126498
Zhang, Yihang / Xu, Mingbiao / Song, Jianjian / Wang, Chunli / Wang, Xiaoliang / Hamad, Bahati Adnan	Study on the corrosion change law and prediction model of cement stone in oil wells with CO2 corrosion in ultra-high-temperature acid gas wells	125879
Zhao, Yang / Meng, Fanyou / Fan, Peishuo / Li, Hong / Niu, Yunlong / Liu, Pinghui	Surface improvement of scrap rubber by microbially induced carbonate precipitation and its effect on mechanical behavior of rubberised mortar	126526
Klima, K. M. / Schollbach, K. / Brouwers, H. J. H. / Yu, Qingliang	Thermal and fire resistance of Class F fly ash based geopolymers – A review	126529
Abolhasani, Alireza / Pachenari, Alireza / Mohammad Razavian, Seyed / Mahdi Abolhasani, Mohammad	Towards new generation of electrode-free conductive cement composites utilizing nano carbon black	126576
Bieliatynskyi, Andrii / Yang, Shilin / Pershakov, Valerii / Shao, Meiyu / Ta, Mingyang	The use of fiber made from fly ash from power plants in China in road and airfield construction	126537
Sharma, Abhishek / Singh, Paramveer / Kapoor, Kanish	Utilization of recycled fine powder as an activator in fly ash based geopolymer mortar	126581
Chen, Ning / Zhao, Shibo / Gao, Zhiwei / Wang, Dawei / Liu, Pengfei / Oeser, Markus / Hou, Yue / Wang, Linbing	Virtual mix design: Prediction of compressive strength of concrete with industrial wastes using deep data augmentation	126580
Lin, Lang / Wu, Bo	Water permeability behavior of recycled lump/aggregate concrete	126508

Über diese
Datenseite
IssueID
61256
Veröffentlicht am:
17.02.2022
Geändert am:
09.05.2022

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - März 2022

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - März 2022

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.