Construction and Building Materials - Oktober 2021

Erschienen:	Oktober 2021

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Zhang, Chunsheng / Wang, Lei / Zhang, Xianggang / Ding, Yahong	A 3-dimensional prediction model for mechanical strength of basalt-steel fiber-reinforced recycled aggregate concrete based on reaction surface method	124376
Rabat, Á. / Tomás, R. / Cano, M.	Advances in the understanding of the role of degree of saturation and water distribution in mechanical behaviour of calcarenites using magnetic resonance imaging technique	124420
Gökçe, H. S. / Tuyan, M. / Nehdi, M. L.	Alkali-activated and geopolymer materials developed using innovative manufacturing techniques: A critical review	124483
Wang, X. T. / Zhu, E. C. / Niu, S. / Wang, H. J.	Analysis and test of stiffness of bolted connections in timber structures	124495
Ling, Jianming / Ren, Liang / Tian, Yu / Gao, Jianhua / Man, Li	Analysis of airfield composite pavement rutting using full-scale accelerated pavement testing and finite element method	124528
Wang, Xiaochen / Li, Shucai / Zhou, Annan / Liu, Rentai / Liu, Yankai / Zhang, Chunyu	An analytical model of apparent viscosity in bleeding process	124471
Liu, Zhiyong / Zang, Chuyue / Zhang, Shu / Zhang, Yunsheng / Yuan, Zhengcheng / Li, Huajian / Jiang, Jinyang	Atmospheric drying preparation and microstructure characterization of fly ash aerogel thermal insulation material with superhydrophobic	124425
Sirico, Alice / Bernardi, Patrizia / Sciancalepore, Corrado / Vecchi, Francesca / Malcevschi, Alessio / Belletti, Beatrice / Milanese, Daniel	Biochar from wood waste as additive for structural concrete	124500
Tekle, Biruk Hailu / Messerer, Dennis / Holschemacher, Klaus	Bond induced concrete splitting failure in textile-reinforced fine-grained concrete	124503
Mu, Wenqiang / Wang, Dongying / Li, Lianchong / Yang, Tianhong / Feng, Qingbo / Wang, Sixu / Xiao, Fukun	Cement flow in interaction rock fractures and its corresponding new construction process in slope engineering	124533
Liu, Jianan / Wang, Zhenjun / Luo, Rui / Bian, Guan / Liang, Qingyun / Yan, Fengfeng	Changes of components and rheological properties of bitumen under dynamic thermal aging	124501
Lyu, Xin / Yang, Ke / Liu, QinJie / Fu, Qiang / Fang, Juejing	Characteristics of early-damaged cement stone and the creep behavior after damage	124484
Garcia-Diaz, Yineth / Torres-Ortega, Ramon / Tovar, Candelaria Tejada / Quiñones-Bolaños, Edgar / Saba, Manuel	Characterization of pull-out behavior in the fiber–mortar interface with superficial treatments	124474
Wang, Xinpeng / Wu, Di / Geng, Qihui / Hou, Dongshuai / Wang, Muhan / Li, Liangwei / Wang, Pan / Chen, Dongdong / Sun, Zhongping	Characterization of sustainable ultra-high performance concrete (UHPC) including expanded perlite	124245
Spitz, N. / Coniglio, N. / Libessart, L. / El Mansori, M. / Djelal, C.	Characterizing tribological behavior of fresh concrete against formwork surfaces	124233
Srivastava, Sumit / Snellings, Ruben / Cool, Pegie	Clinker-free carbonate-bonded (CFCB) products prepared by accelerated carbonation of steel furnace slags: A parametric overview of the process development	124556
Kapeluszna, Ewa / Kotwica, Łukasz / Nocuń-Wczelik, Wiesława	Comparison of the effect of ground waste expanded perlite and silica fume on the hydration of cements with various tricalcium aluminate content – Comprehensive analysis	124434
Mac, Van Ha / Huh, Jungwon / Doan, Nhu Son / Lee, Bang Yeon / Haldar, Achintya	A comprehensive study on identification of both deck and soffit defects in concrete bridge decks through thermographic investigation of shaded side under natural conditions	124452
Guo, Tiantian / Wu, Tao / Gao, Liming / He, Bin / Ma, Fuli / Huang, Zhanfang / Bai, Xiaohong	Compressive strength and electrochemical impedance response of red mud-coal metakaolin geopolymer exposed to sulfuric acid	124523
Jiang, Zhisheng / Zheng, Wenzhong / Li, Ruisen / Guo, Changshun	A computational model for thick concrete slab demolition using soundless chemical demolition agent	124430
Woyciechowski, Piotr / Łukowski, Paweł / Szmigiera, Elżbieta / Adamczewski, Grzegorz / Chilmon, Karol / Spodzieja, Szymon	Concrete corrosion in a wastewater treatment plant – A comprehensive case study	124388
Bionghi, Reza / Shahraki, Dariush / Ameri, Mahmoud / Karimi, Mohammad M.	Correlation between bond strength and surface free energy parameters of asphalt binder-aggregate system	124487
Liu, Bo / Fan, Endian / Jia, Jinhuan / Du, Cuiwei / Liu, Zhiyong / Li, Xiaogang	Corrosion mechanism of nitrate reducing bacteria on X80 steel correlated to its intermediate metabolite nitrite	124454
Quan, Xiaoyi / Wang, Sheliang / Liu, Kangning / Zhao, Nan / Xu, Jin / Xu, Fan / Zhou, Jie	The corrosion resistance of engineered cementitious composite (ECC) containing high-volume fly ash and low-volume bentonite against the combined action of sulfate attack and dry-wet cycles	124599
Freire, Reuber Arrais / Di Benedetto, Hervé / Sauzéat, Cédric / Pouget, Simon / Lesueur, Didier	Crack propagation analysis in bituminous mixtures reinforced by different types of geogrids using digital image correlation	124522
Deng, Jun / Li, Xiaoda / Zhu, Miaochang / Rashid, Khuram / Wang, Qiang	Debonding damage detection of the CFRP-concrete interface based on piezoelectric ceramics by the electromechanical impedance method	124431
Duan, Siyu / Wu, Hao / Liao, Hongqiang / Cheng, Fangqin	Design and experimental study of a blended cement containing high-volume solid waste activated ultrafine powder	124504
Karadumpa, Chandra Sekhar / Pancharathi, Rathish Kumar	Developing a novel mix design methodology for slow hardening composite cement concretes through packing density approach	124391
Zhao, Yun / Bi, Jihong / Huo, Linying / Wang, Zhaoyao / Guan, Jian / Zhao, Yaran	Development of a coupled numerical framework of steel fiber reinforced self-compacting concrete	124582
Farhadian, Ali / Ghasemi, Ebrahim / Hoseinie, Seyed Hadi / Bagherpour, Raheb	Development of a new test method for evaluating the abrasivity of granite building stones during polishing process based on weight loss of abrasive tool	124497
Zarzuela, Rafael / Almoraima Gil, M. L. / Carretero, Jesus / Carbú, María / Cantoral, Jesús M. / Mosquera, María J.	Development of a novel engineered stone containing a CuO/SiO2 nanocomposite matrix with biocidal properties	124459
Chen, Shi-Zhi / Feng, De-Cheng / Han, Wan-shui / Wu, Gang	Development of data-driven prediction model for CFRP-steel bond strength by implementing ensemble learning algorithms	124470
Zhang, Yifan / Aslani, Farhad	Development of fibre reinforced engineered cementitious composite using polyvinyl alcohol fibre and activated carbon powder for 3D concrete printing	124453
Yu, Xiaohe / Luo, Rong / Huang, Tingting / Wang, Jinteng / Chen, Yu	Dielectric properties of asphalt pavement materials based on the temperature field	124409
Liu, Yanming / Chen, Shu Jian / Sagoe-Crentsil, Kwesi / Duan, Wenhui	Digital concrete modelling: An alternative approach to microstructural pore analysis of cement hydrates	124558
Tahwia, Ahmed M. / Elgendy, Gamal M. / Amin, Mohamed	Durability and microstructure of eco-efficient ultra-high-performance concrete	124491
Sun, Rui / Wang, Dongmin / Cao, Hongmei / Wang, Yiren / Lu, Zhaohua / Xia, Jiangbao	Ecological pervious concrete in revetment and restoration of coastal Wetlands: A review	124590
Gašparík, Miroslav / Karami, Elham / Sethy, Anil Kumar / Das, Sumanta / Kytka, Tomáš / Paukner, Filip / Gaff, Milan	Effect of freezing and heating on the screw withdrawal capacity of Norway spruce and European larch wood	124457
Li, Jiahang / Xie, Fei / Wang, Dan / Ma, Cheng / Wu, Ming / Gong, Ke	Effect of magnetic field on stress corrosion cracking induced by Sulfate-reducing bacteria	124521
Li, Qinfei / Zhao, Yao / Chen, Heng / Zhao, Piqi / Hou, Pengkun / Cheng, Xin / Xie, Ning	Effect of waste corn stalk ash on the early-age strength development of fly ash/cement composite	124463
Tang, Xudong / Xu, Qiang / Qian, Kuangliang / Ruan, Shaoqin / Lian, Songsong / Zhan, Shulin	Effects of cyclic seawater exposure on the mechanical performance and chloride penetration of calcium sulfoaluminate concrete	124139
Mahmood, Aziz Hasan / Foster, Stephen J. / Castel, Arnaud	Effects of mixing duration on engineering properties of geopolymer concrete	124449
Carret, Jean-Claude / Lamothe, Sébastien / Hounkponou, Séverin Eusèbe / Carter, Alan	Effects of pre-cracking on the early-age mechanical properties of a cement-treated base material mixed and tested in laboratory	124488
Ruan, Wenqiang / Liao, Jianguo / Li, Fengheng / Gu, Xinqi / Zhou, Aiguo / Xie, Yufen	Effects of water purifying material waste and red mud on performance of magnesium phosphate cement	124563
Fobbe, N. / Goetz-Neunhoeffer, F. / Foerster, H. / Foerthner, S. / Jansen, D.	Efflorescence during the drying of a technical gypsum body: Application of thermodynamic principles	124445
Zha, Fusheng / Qiao, Borui / Kang, Bo / Xu, Long / Chu, Chengfu / Yang, Chengbin	Engineering properties of expansive soil stabilized by physically amended titanium gypsum	124456
Yang, Bing / Li, Hui / Zhang, Hengji / Sun, Lijun / Harvey, John / Tian, Yu / Zhu, Yaoting / Zhang, Xiao / Han, Daqian / Liu, Liyuan	Environmental impact of solid waste filler in porous asphalt mixture	124447
Malone, Clayton / Zhu, Jinying / Hu, Jiong / Snyder, April / Giannini, Eric	Evaluation of alkali–silica reaction damage in concrete using linear and nonlinear resonance techniques	124538
Wang, Xiao-Yong	Evaluation of the properties of cement–calcined Hwangtoh clay–limestone ternary blends using a kinetic hydration model	124596
Kazemi Esfeh, Sina / Rong, Hua / Dong, Wei / Zhang, Binsheng	Experimental investigation on bond behaviours of deformed steel bars embedded in early age concrete under biaxial lateral pressures at low curing temperatures	124419
Qin, Hao / Yang, Jiacheng / Yan, Kai / Doh, Jeung-Hwan / Wang, Kun / Zhang, Xin	Experimental research on the spalling behaviour of ultra-high performance concrete under fire conditions	124464
Jiang, Sheng / Shen, Luming / Li, Wengui	An experimental study of aggregate shape effect on dynamic compressive behaviours of cementitious mortar	124443
Shao, Xiaoping / Sun, Jianpeng / Xin, Jie / Zhao, Bingchao / Sun, Wuliang / Li, Longqing / Tang, Renlong / Tian, Chuang / Xu, Baowa	Experimental study on mechanical properties, hydration kinetics, and hydration product characteristics of aeolian sand paste-like materials	124601
Singh, Avanish / Kumar, Rakesh / Goel, Pankaj	Factors influencing strength of magnesium oxychloride cement	124571
Dan, Han-Cheng / Wang, Zelin / Cao, Wei / Liu, Jin	Fatigue characterization of porous asphalt mixture complicated with moisture damage	124525
Goulart Bezerra, Carolina / Rocha, Camila Aparecida Abelha / Siqueira, Iolanda Scheibe de / Filho, Romildo Dias Toledo	Feasibility of iron-rich ore tailing as supplementary cementitious material in cement pastes	124496
Li, Zhi-qiang / Hou, Wei / Lin, Guan	Flexural strengthening of RC beams with BFRP or high strength steel bar–reinforced ECC matrix	124404
Pae, Junil / Kang, Sung-Hoon / Lee, Namkon / Kim, Sungwook / Moon, Juhyuk	Flow distance induced variation analysis of digitally segmented steel fibers in UHPFRC	124515
Shekhovtsova, Svetlana / Korolev, Evgeniy	Formation of polymer modified binder structure in the presence of carbon nanomaterials	124591
Vinod, A. / Sanjay, M. R. / Siengchin, Suchart / Fischer, Steffen	Fully bio-based agro-waste soy stem fiber reinforced bio-epoxy composites for lightweight structural applications: Influence of surface modification techniques	124509
Shi, Ye / Long, Guangcheng / Zeng, Xiaohui / Xie, Youjun / Wang, Huihui	Green ultra-high performance concrete with very low cement content	124482
Yang, Fengming / Zhou, Xin / Pang, Fangjie / Wang, Weijie / Wang, Wenlong / Wang, Zengmei	Heavy metal removal of solid waste source sulphoaluminate cement with graphene oxide	124460
Yim, Hong Jae / Bae, Young Hwan / Jun, Yubin	Hydration and microstructural characterization of early-age cement paste with ultrasonic wave velocity and electrical resistivity measurements	124508
Bhojaraju, Chandrasekhar / Di Mare, Michael / Ouellet-Plamondon, Claudiane M.	The impact of carbon-based nanomaterial additions on the hydration reactions and kinetics of GGBS-modified cements	124366
Brazão Farinha, Catarina / de Brito, Jorge / Veiga, Rosário	Incorporation of high contents of textile, acrylic and glass waste fibres in cement-based mortars. Influence on mortars’ fresh, mechanical and deformability behaviour	124424
Sun, Ming / Sun, Congtao / Zhang, Peng / Liu, Nazhen / Li, Yantao / Duan, Jizhou / Hou, Baorong	Influence of carbonation on chloride binding of mortars made with simulated marine sand	124455
Li, Jian / Wang, Ru / Li, Lei	Influence of cellulose ethers structure on mechanical strength of calcium sulphoaluminate cement mortar	124514
Xu, Jing / Yang, Shaobo / Ren, Qiangqiang / Yang, Guiyun	Influence of coal ash characteristics on the pretreatment process of fluidized bed cement calcination	124531
Martins, Juliana Vieira / Garcia, Dayana Cristina Silva / Paulino Aguilar, Maria Teresa / dos Santos, White Jose	Influence of replacing Portland cement with three different concrete sludge wastes	124519
Gao, Yuan / Jing, Hongwen / Zhao, Zhenlong / Shi, Xinshuai / Li, Luan	Influence of ultrasonication energy on reinforcing-roles of CNTs to strengthen ITZ and corresponding anti-permeability properties of concrete	124451
Goyal, Arpit / Ganjian, Eshmaiel / Pouya, Homayoon Sadeghi / Tyrer, Mark	Inhibitor efficiency of migratory corrosion inhibitors to reduce corrosion in reinforced concrete exposed to high chloride environment	124461
Zolfagharnasab, Arash / Ramezanianpour, Ali Akbar / Bahman-Zadeh, Farnaz	Investigating the potential of low-grade calcined clays to produce durable LC3 binders against chloride ions attack	124541
Ying, Zi / Cui, Yu-Jun / Benahmed, Nadia / Duc, Myriam	Investigating the salinity effect on water retention property and microstructure changes along water retention curves for lime-treated soil	124564
Jiang, Xi / Zhang, Miaomiao / Xiao, Rui / Polaczyk, Pawel / Bai, Yun / Huang, Baoshan	An investigation of structural responses of inverted pavements by numerical approaches considering nonlinear stress-dependent properties of unbound aggregate layer	124505
Liu, Quan / Ding, Gongying / Zhang, Zeyu / Fu, Chaoliang / Oeser, Markus	Investigation on bitumen-epoxy interface in cold mixed epoxy bitumen using experimental observation and molecular dynamics simulation	124490
Md Zain, Mohd Raizamzamani / Oh, Chai Lian / Lee, Siong Wee	Investigations on rheological and mechanical properties of self-compacting concrete (SCC) containing 0.6 μm eggshell as partial replacement of cement	124539
Tian, Yu / Li, Hui / Sun, Lijun / Zhang, Hengji / Harvey, John / Yang, Jie / Yang, Bing / Zuo, Xin	Laboratory investigation on rheological, chemical and morphological evolution of high content polymer modified bitumen under long-term thermal oxidative aging	124565
Zhang, Shuyan / Cui, Yanan / Wei, Weiwei	Low-temperature characteristics and microstructure of asphalt under complex aging conditions	124408
Ullah, Shafi / Yang, Chen / Cao, Liping / Wang, Peng / Chai, Qinggang / Li, Yuexiang / Wang, Lizhi / Dong, Zejiao / Lushinga, Nonde / Zhang, Bingtao	Material design and performance improvement of conductive asphalt concrete incorporating carbon fiber and iron tailings	124446
Peng, Lei / Chen, Bing	Mechanical behavior, durability, thermal performances and microstructure of GGBFS – Modified MPC solidified dredged sludge	124557
Salachoris, Georgios Panagiotis / Magagnini, Erica / Clementi, Francesco	Mechanical characterization of "Scaglia Rossa" stone masonry through experimental and numerical analyses	124572
Li, Zheng / Wang, Xijun / He, Minjuan / Shu, Zhan / Huang, Yi / Wu, Ao / Ma, Zhong	Mechanical performance of pre-fabricated metal dovetail connections for Cross-Laminated Timber (CLT) structures	124468
Jiang, Zhangfan / Sevim, Özer / Ozbulut, Osman E.	Mechanical properties of graphene nanoplatelets-reinforced concrete prepared with different dispersion techniques	124472
Bompa, D. V. / Elghazouli, A. Y.	Mechanical properties of hydraulic lime mortars and fired clay bricks subjected to dry-wet cycles	124458
Sheikh, Taimur Mazhar / Anwar, Mohammed Parvez / Muthoosamy, Kasturi / Jaganathan, Jayaprakash / Chan, Andy / Mohamed, Abdullahi Ali	The mechanics of carbon-based nanomaterials as cement reinforcement — A critical review	124441
Standoli, Gianluca / Salachoris, Georgios Panagiotis / Masciotta, Maria Giovanna / Clementi, Francesco	Modal-based FE model updating via genetic algorithms: Exploiting artificial intelligence to build realistic numerical models of historical structures	124393
Navarrete, Ivan / Lopez, Mauricio / Kurama, Yahya	Multi-layer casting of self-consolidating concrete: Influence of mortar rheology and casting parameters on the inter-layer bond strength	124492
Sun, Mian / Zhu, Jiaoqun / Sun, Tao / Chen, Youzhi / Li, Xinping / Yin, Weisong / Han, Jinlong	Multiple effects of nano-CaCO3 and modified polyvinyl alcohol fiber on flexure–tension-resistant performance of engineered cementitious composites	124426
Raju, Ramiz Ahmed / Akiyama, Mitsuyoshi / Lim, Sopokhem / Kakegawa, Tatsuya / Hosono, Yuka	A novel casting procedure for SFRC piles without shear reinforcement using the centrifugal forming technique to manipulate the fiber orientation and distribution	124232
Zhang, Yining / Cheng, Huailei / Sun, Lijun	Performance-based design of recycled hot-mix asphalt (HMA) incorporating compaction effort variable	124277
Liu, Kaiqiang / Yang, Xuesong / Zhang, Hua / Yao, Shun / Huang, Ziling / Zhang, Xueni / Cao, Quan / Li, Bin / Luo, Zeng / Cheng, Xiaowei / Yang, Zhaoliang / Chi, Chongrong	Pore connectivity of oil well cement in the early hydration stage by in situ electrical resistivity measurements and low-field nuclear magnetic resonance	124448
Congro, Marcello / de Alencar Monteiro, Vitor Moreira / Brandão, Amanda L. T. / dos Santos, Brunno F. / Roehl, Deane / de Andrade Silva, Flávio	Prediction of the residual flexural strength of fiber reinforced concrete using artificial neural networks	124502
Park, Kwang-min / Min, Kyung-sung / Lee, Bong-chun / Roh, Young-Sook	Proposal for enhancing the compressive strength of alkali-activated materials-based binder jetting 3D printed outputs	124377
Kazemian, Ali / Khoshnevis, Behrokh	Real-time extrusion quality monitoring techniques for construction 3D printing	124520
Su, Miao / Zhong, Qingyu / Peng, Hui	Regularized multivariate polynomial regression analysis of the compressive strength of slag-metakaolin geopolymer pastes based on experimental data	124529
Li, Faping / Yang, Zheming / Chen, Defeng / Lu, Yiyan / Li, Shan	Research on mechanical properties and micro-mechanism of Engineering Geopolymers Composites (EGCs) incorporated with modified MWCNTs	124516
Zhou, Hao / Yao, Xia / Min, Huihua / Huang, Hong / Ma, Bing / Shen, Xiaodong / Liu, Yuqing / Lin, Tao	Research on structure modulation of alite and its effect on the mechanical properties of cement clinker	124511
Zeng, Zhi-ping / Huang, Xu-dong / Yan, Bin / Wang, Wei-dong / Shuaibu, Abdulmumin Ahmed / He, Xian-Feng	Research on the fatigue performance of self-compacting concrete structure in CRTSIII slab ballastless track under the action of heavy haul train	124465
Kamboozia, Neda / Saed, Seyed Ataollah / Rad, Sina Mousavi	Rheological behavior of asphalt binders and fatigue resistance of SMA mixtures modified with nano-silica containing RAP materials under the effect of mixture conditioning	124433
Khorami, M. / Navarro-Gregori, Juan / Serna, P.	Serviceability behaviour of reinforced UHPFRC tensile elements: Assessment of the ratio between maximum and average crack widths	124513
Asteris, Panagiotis G. / Skentou, Athanasia D. / Bardhan, Abidhan / Samui, Pijush / Lourenço, Paulo B.	Soft computing techniques for the prediction of concrete compressive strength using Non-Destructive tests	124450
Lee, Jong-Sub / Tutumluer, Erol / Hong, Won-Taek	Stiffness evaluation of compacted geo-materials using crosshole-type dynamic cone penetrometer (CDP), rPLT, and LFWD	124015
Zhang, Jiancong / Zhang, Na / Li, Chao / Zhang, Yihe	Strength development mechanism of a marine binding material with red mud and seawater	124428
Mousavi, Mohammad Ali / Sadeghi-Nik, Aref / Bahari, Ali / Jin, Congrui / Ahmed, Ramadan / Ozbakkaloglu, Togay / de Brito, Jorge	Strength optimization of cementitious composites reinforced by carbon nanotubes and Titania nanoparticles	124510
Wu, Jiangyu / Yin, Qian / Jing, Hongwen / Pu, Hai / Gao, Yuan / Xu, Jingmin	Strength prediction based on ultrasonic property of fractal gangue cemented rockfill reinforced by carbon nanotubes	124444
Nayaka, R. Ramesh / Alengaram, U. Johnson / Jumaat, Mohd Zamin / Fonseca, Fernando S. / Banerjee, Anish	Structural performance of masonry prisms, wallettes and walls containing high volume of industrial by-products – Sustainable housing perspective	124439
Zheng, Chuanfeng / Xu, Junpeng / Zhang, Ting / Tan, Guojin	Study on the microscopic damage of porous asphalt mixture under the combined action of hydrodynamic pressure and ice crystal frost heave	124489
Guo, Fucheng / Pei, Jianzhong / Zhang, Jiupeng / Li, Rui / Zhou, Bochao / Chen, Zixuan	Study on the skid resistance of asphalt pavement: A state-of-the-art review and future prospective	124411
Pongsopha, Phattharachai / Sukontasukkul, Piti / Maho, Buchit / Intarabut, Darrakorn / Phoo-ngernkham, Tanakorn / Hanjitsuwan, Sakonwan / Choi, Donguk / Limkatanyu, Suchart	Sustainable rubberized concrete mixed with surface treated PCM lightweight aggregates subjected to high temperature cycle	124535
Yahya Mohammed Al-Fasih, Mohammed / Huseien, Ghasan Fahim / Syahrizal bin Ibrahim, Izni / Sam, Abdul Rahman Mohd / Algaifi, Hassan Amer / Alyousef, Rayed	Synthesis of rubberized Alkali-activated Concrete: Experimental and numerical evaluation	124526
Zhao, Zhiguang / Yang, Xingshuo / Qu, Xiaoling / Zheng, Jiawei / Mai, Fangyu	Thermal insulation performance evaluation of autoclaved aerated concrete panels and sandwich panels based on temperature fields: Experiments and simulations	124560
Emmanuel, K. D. C. / Herath, H. M. C. M. / Jeewantha, L. H. J. / Epaarachchi, J. A. / Aravinthan, T.	Thermomechanical and fire performance of DGEBA based shape memory polymer composites for constructions	124442
Ding, Haibo / Zhang, Hong / Liu, Han / Qiu, Yanjun	Thermoreversible aging in model asphalt binders	124355
Chiniforush, A. A. / Valipour, H. R. / Ataei, A.	Timber-timber composite (TTC) connections and beams: An experimental and numerical study	124493
Yang, Lufeng / Wang, Lu / Yu, Bo	Time-varying behavior and its coupling effects with environmental conditions and cementitious material types on surface chloride concentration of marine concrete	124578
Huo, Wangwen / Zhu, Zhiduo / Zhang, Jie / Kang, Zhuanzhuan / Pu, ShaoYun / Wan, Yu	Utilization of OPC and FA to enhance reclaimed lime-fly ash macadam based geopolymers cured at ambient temperature	124378
Gökalp, İslam	The waste transparent nylon modified bitumen properties: Experimental assessment on physical, rheological properties and storage stability	124353

Über diese
Datenseite
IssueID
59462
Veröffentlicht am:
02.09.2021
Geändert am:
09.05.2022

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - Oktober 2021

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - Oktober 2021

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.