Construction and Building Materials - März 2021

Erschienen:	März 2021

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Kasper, Yann / Albiez, Matthias / Ummenhofer, Thomas / Mayer, Christoph / Meier, Tobias / Choffat, Fabien / Ciupack, Yvonne / Pasternak, Hartmut	Application of toughened epoxy-adhesives for strengthening of fatigue-damaged steel structures	121579
Zhang, Yijie / Wang, Jing / Li, Liping / Ma, Chuanyi / Hou, Dongshuai / Wang, Kai / Wang, Shugang	Basic properties and mechanism of high activity phosphate-based slurry for dynamic water blocking-A feasibility research	122040
Yahui, Yang / Xu, Gang / Bin, TIAN	Carbonation characteristics of cement-based materials under the uniform distribution of pore water	121450
Frąc, Maksymilian / Pichór, Waldemar / Szołdra, Paulina / Szudek, Wojciech	Cement composites with expanded graphite/paraffin as storage heater	122126
Xiao, Rui / Polaczyk, Pawel / Jiang, Xi / Zhang, Miaomiao / Wang, Yanhai / Huang, Baoshan	Cementless controlled low-strength material (CLSM) based on waste glass powder and hydrated lime: Synthesis, characterization and thermodynamic simulation	122157
Hosseini Zadeh, Amin / Mamirov, Miras / Kim, Seunghee / Hu, Jiong	CO2-treatment of recycled concrete aggregates to improve mechanical and environmental properties for unbound applications	122180
Baietti, Giulia / Kahangi Shahreza, Seyedmohammad / Santandrea, Mattia / Carloni, Christian	Concrete columns confined with SRP: Effect of the size, cross-sectional shape and amount of confinement	121618
Jawdhari, Akram / Hadhood, Abdeldayem / Fam, Amir	Confinement model for FRP-wrapped circular columns when the wraps are subjected to damage	122101
Bompa, D. V. / Xu, B. / Elghazouli, A. Y.	Constitutive modelling and mechanical properties of cementitious composites incorporating recycled vinyl banner plastics	122159
Shi, Danda / Chen, Xingwei / Shao, Wei	Corrosion initiation life prediction of RC square piles based on a dual time-dependent bidirectional chloride diffusion model	122192
Soares, Joadelio Chagas / Dias, Dylmar Penteado / Atem de Carvalho, Eduardo / de Azevedo, Jodimar Soares	Determination of shear strength by Iosipescu (V-notch) method of metakaolin-based geopolymeric resins activated by different silicate and hydroxide combinations	122120
Mohan, Manu K. / Rahul, A. V. / De Schutter, Geert / Van Tittelboom, Kim	Early age hydration, rheology and pumping characteristics of CSA cement-based 3D printable concrete	122136
Zhang, Su-Lei / Qi, Xiao-Qiang / Guo, Si-Yao / Ren, Jie / Chen, Ji-Zhou / Chi, Bo / Wang, Xu-Chun	Effect of a novel hybrid TiO2-graphene composite on enhancing mechanical and durability characteristics of alkali-activated slag mortar	122154
Shan, Liyan / Li, Zhiwei / Tian, Dong / Tan, Yiqiu	Effect of anti-icing additives on the stability of emulsified asphalt binders	121951
Li, Wan-qian / Pei, Chun / Zhu, Yaoteng / Zhu, Ji-Hua	Effect of chopped carbon fiber on interfacial behaviors of ICCP-SS system	122117
Pang, Bo / Liu, Jun / Wang, Baomin / Liu, Runqing / Yang, Yuanquan	Effects of K-struvite on hydration behavior of magnesium potassium phosphate cement	121741
Rooby, Divya Rachel / Kumar, T. Nanda / Harilal, Manu / Sofia, S. / George, R. P. / Philip, John	Enhanced corrosion protection of reinforcement steel with nanomaterial incorporated fly ash based cementitious coating	122130
Chen, Chen / Tang, Boming / Cao, Xuejuan / Gu, Fan / Huang, Wei	Enhanced photocatalytic decomposition of NO on portland cement concrete pavement using nano-TiO2 suspension	122135
Cassiani, Juan / Dugarte, Margareth / Martinez-Arguelles, Gilberto	Evaluation of the chemical index model for predicting supplementary cementitious material dosage to prevent the alkali-silica reaction in concrete	122158
Potts, A. / Leay, L.	Evidence for pore water composition controlling carbonate morphology in concrete and the further effect of gamma radiation	122049
Marchione, Francesco / Munafò, Placido	Experimental investigation on timber-glass double-lap adhesive joints reinforced with nylon fabric	122152
Martins Cavalcante de Melo, Fernanda / Araújo de Jesus Cruz, Anna Cristina / de Souza Netto, Leonardo Dantas / Simplício, Marcos Antônio de Souza	Experimental study of bond between steel bars and hybrid fibers reinforced concrete	122176
Wang, Xuhao / Song, Pengfei / Yu, Haiyang / Taylor, Peter / Sadati, Seyedhamed / Freeseman, Katelyn / Ning, Yingjie	Extended life concrete bridge decks utilizing internal curing to reduce cracking – Materials characterization and engineering demonstration	122163
Ding, Lu-qiang / Vanapalli, Sai K. / Zou, Wei-Lie / Han, Zhong / Wang, Xie-Qun	Freeze-thaw and wetting-drying effects on the hydromechanical behavior of a stabilized expansive soil	122162
Mohammadi Ghahsareh, Fatemeh / Mostofinejad, Davood	Groove classification in EBROG FRP-to-concrete joints	122169
Xia, Chunhua / Zhang, Xueying / Xia, Linghui	Heavy metal ion adsorption by permeable oyster shell bricks	122128
Hajikarimi, Pouria / Hosseini, Alireza Sadat / Fini, Elham H.	A heterogeneous micromechanical model for bituminous composites containing rigid and flexible particulates	122102
Nuaklong, Peem / Boonchoo, Narathip / Jongvivatsakul, Pitcha / Charinpanitkul, Tawatchai / Sukontasukkul, Piti	Hybrid effect of carbon nanotubes and polypropylene fibers on mechanical properties and fire resistance of cement mortar	122189
Li, Xiaosheng / Shui, Zhonghe / Gao, Xu / Ling, Gang	Hydration implanted reactive transport modelling in saturated cement-based materials	122185
Guo, Hui / Jiang, Linzhi / Tao, Junlin / Chen, Yu / Zheng, Zhiqin / Jia, Bin	Influence of a hybrid combination of steel and polypropylene fibers on concrete toughness	122132
Xia, Tian / Chen, Xiang / Xu, Jianhui / Li, Youbing / Zhang, Anxin	Influence of hydrophilic nanosilica premixing method on the property of isocyanate-based polymer modified bitumen	122174
Bilal, Hassan / Chen, Tiefeng / Ren, Miao / Gao, Xiaojian / Su, Anshuang	Influence of silica fume, metakaolin & SBR latex on strength and durability performance of pervious concrete	122124
Ma, Siwei / Huang, Cihang / Baah, Prince / Nantung, Tommy / Lu, Na	The influence of water-to-cement ratio and superabsorbent polymers (SAPs) on solid-like behaviors of fresh cement pastes	122160
Suleman, Muhammad / Ahmad, Naveed / Khan, Sibghat Ullah / Ahmad, Tufail	Investigating flexural performance of waste tires steel fibers-reinforced cement-treated mixtures for sustainable composite pavements	122099
Ji, Suk-Won / Kudo, Rumi / Fukuda, Shintaro / Choi, Soo-Kyung	Investigation of the variations in nonslip effects of a fluorine-based liquid antislip agent due to long-term wear from walking	122067
Zhai, Shengtian / Pang, Bo / Liu, Guojian / Zhang, Yu / Xu, Kaili / She, Wei / Zhang, Yunsheng	Investigation on preparation and multifunctionality of reduced graphene oxide cement mortar	122119
Babagoli, Rezvan	Laboratory investigation of the performance of binders and asphalt mixtures modified by carbon nano tube, poly phosphoric acid, and styrene butadiene rubber	122178
Ouvrier-Buffet, Florian / Eiras, Jesus N. / Garnier, Vincent / Payan, Cédric / Ranaivomanana, Narintsoa / Durville, Benoît / Marquie, Christophe	Linear and nonlinear resonant ultrasonic techniques applied to assess delayed ettringite formation on concrete samples	121545
Cao, Shunze / Zhang, Yuwu / Lu, Yang	Mechanical properties and reinforcement mechanisms evaluation of closed-cell polymer foams reinforced by recycled glass beads	122062
Moro, Carlos / Francioso, Vito / Velay-Lizancos, Mirian	Modification of CO2 capture and pore structure of hardened cement paste made with nano-TiO2 addition: Influence of water-to-cement ratio and CO2 exposure age	122131
Liu, Fei / Pan, Baofeng / Cao, Peng / Zhou, Changjun	Multi-scale characterization on behaviors of the interface between magnesium phosphate cement and portland cement	122139
Tian, Hongwei / Kong, Xiangming / Miao, Xia / Jiang, Lingfei / Pang, Xiaofan	A new insight into the working mechanism of PCE emphasizing the interaction between PCE and Ca2+ in fresh cement paste	122133
Ali, Osama / Abbas, Aya / Khalil, Eehab / Madkour, Hany	Numerical investigation of FRP-confined short square RC columns	122141
Özkılıç, Yasin Onuralp / Yazman, Şakir / Aksoylu, Ceyhun / Arslan, Musa Hakan / Gemi, Lokman	Numerical investigation of the parameters influencing the behavior of dapped end prefabricated concrete purlins with and without CFRP strengthening	122173
Rezende Schuab, Mariana / dos Santos, White Jose / Borges, Paulo Henrique Ribeiro	On the development of MK/BFS alkali-activated materials as repair mortars: Performance under free and restrained shrinkage tests	122109
Liu, Lijie / Li, Jinhong / Deng, Yong / Yang, Zhiwei / Huang, Kaiyue / Zhao, Siyi	Optimal design of multi-layer structure composite containing inorganic hydrated salt phase change materials and cement: Lab-scale tests for buildings	122125
Zhang, Jiong / Xia, Shuang / Hu, Nian / Hao, Wengang / Han, Ruonan / Meng, Bowen / Zhang, Zhongze	Optimization of anti-clogging pervious pavement structure based on numerical evaluation	122186
Cabral, Matheus Roberto / Nakanishi, Erika Yukari / Santos, Sergio Francisco / Christoforo, André Luís / Fiorelli, Juliano	Orientation effect on the physical and mechanical properties of strand cement boards	122121
Heidarabadizadeh, Nasrin / Ghanizadeh, Ali Reza / Behnood, Ali	Prediction of the resilient modulus of non-cohesive subgrade soils and unbound subbase materials using a hybrid support vector machine method and colliding bodies optimization algorithm	122140
Li, Tao / Huang, Hai-Han	Probabilistic quantitative analysis on the contents of sulfate corrosion products in concrete	122134
Li, Xiaoda / Deng, Jun / Wang, Yi / Xie, Yan / Liu, Tonghua / Rashid, Khuram	RC beams strengthened by prestressed CFRP plate subjected to sustained loading and continuous wetting condition: Time-dependent prestress loss	122187
Zhang, Shiyu / Zhao, Yingliang / Ding, Hangxing / Qiu, Jingping / Guo, Zhenbang	Recycling flue gas desulfurisation gypsum and phosphogypsum for cemented paste backfill and its acid resistance	122170
Luo, Guocheng / Li, Xue / Zhou, Yingwu / Sui, Lili / Chen, Cheng	Replacing steel stirrups with natural fiber reinforced polymer stirrups in reinforced concrete Beam: Structural and environmental performance	122172
Nalon, Gustavo Henrique / Ribeiro, José Carlos Lopes / Araújo, Eduardo Nery Duarte de / Pedroti, Leonardo Gonçalves / Franco de Carvalho, José Maria / Santos, Rodrigo Felipe / de Oliveira, Diôgo Silva	Residual mechanical properties of mortars containing carbon nanomaterials exposed to high temperatures	122123
Shamaki, Mubarak / Adu-Amankwah, Samuel / Black, Leon	Reuse of UK alum water treatment sludge in cement-based materials	122047
Dai, Lizhao / Chen, Yang / Wang, Lei / Ma, Yafei	Secondary anchorage and residual prestressing force in locally corroded PT beams after strand fracture	122137
Nguyen, Hang T. N. / Li, Ye / Tan, Kang Hai	Shear behavior of fiber-reinforced concrete hollow-core slabs under elevated temperatures	121362
Mouka, Theodora / Dimitrakopoulos, Elias G.	Simulation of embedment phenomena on bamboo culms via a modified foundation modelling approach	122048
Antunes, Daniela / Martins, Ricardo / Carmo, Ricardo / Costa, Hugo / Júlio, Eduardo	A solution with low-cement-lightweight concrete and high durability for applications in prefabrication	122153
Lang, Lei / Chen, Bowen / Chen, Bing	Strength evolutions of varying water content-dredged sludge stabilized with alkali-activated ground granulated blast-furnace slag	122111
Kirilovica, Inta / Vītiņa, Inta / Grase, Liga	Structural investigation of carbonation and hydration process of hydraulic dolomitic binder	122050
Real, Sofia / Bogas, José Alexandre / Pontes, Jorge	Structural lightweight aggregate concrete exposed to marine environment for 5 years	122161
Sharma, S. / Graziotti, F. / Magenes, G.	Torsional shear strength of unreinforced brick masonry bed joints	122053
Margaritis, Alexandros / Pipintakos, Georgios / Varveri, Aikaterini / Jacobs, Geert / Hasheminejad, Navid / Blom, Johan / van den bergh, Wim	Towards an enhanced fatigue evaluation of bituminous mortars	121578
Daungwilailuk, Totsawat / Pheinsusom, Phoonsak / Pansuk, Withit	Uniaxial load testing of large-scale 3D-printed concrete wall and finite-element model analysis	122039
Billong, Ndigui / Oti, Jonathan / Kinuthia, John	Using silica fume based activator in sustainable geopolymer binder for building application	122177
Cong, Peiliang / Mei, Linna	Using silica fume for improvement of fly ash/slag based geopolymer activated with calcium carbide residue and gypsum	122171

Über diese
Datenseite
IssueID
54855
Veröffentlicht am:
09.01.2021
Geändert am:
09.01.2021

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - März 2021

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - März 2021

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.