Construction and Building Materials - November 2020

Erschienen:	November 2020

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Zhao, Lianheng / Zhang, Shuaihao / Huang, Dongliang / Wang, Xiang / Zhang, Yingbin	3D shape quantification and random packing simulation of rock aggregates using photogrammetry-based reconstruction and discrete element method	119986
Ungureanu, Dragoș / Taranu, Nicolae / Hoha, Didi / Zghibarcea, Ștefan / Isopescu, Dorina Nicolina / Boboc, Vasile / Oprişan, Gabriel / Scutaru, Maria Cristina / Boboc, Andrei / Hudișteanu, Iuliana	Accelerated testing of a recycled road structure made with reclaimed asphalt pavement material	120658
Hu, Jianying / Yu, Xiong (Bill)	Adaptive building roof by coupling thermochromic material and phase change material: Energy performance under different climate conditions	120481
Sengsri, Pasakorn / Kaewunruen, Sakdirat	Additive manufacturing meta-functional composites for engineered bridge bearings: A review	120535
Cheng, Zhengqing / Zhao, Renda / Yuan, Yuan / Li, Fuhai / Castel, Arnaud / Xu, Tengfei	Ageing coefficient for early age tensile creep of blended slag and low calcium fly ash geopolymer concrete	119855
Zhang, Miaomiao / Gong, Hongren / Jia, Xiaoyang / Xiao, Rui / Jiang, Xi / Ma, Yuetan / Huang, Baoshan	Analysis of critical factors to asphalt overlay performance using gradient boosted models	120083
Gupta, Souradeep / Krishnan, Padmaja / Kashani, Alireza / Kua, Harn Wei	Application of biochar from coconut and wood waste to reduce shrinkage and improve physical properties of silica fume-cement mortar	120688
Aziz, Muhammad Khuzaimi / Mohd Hasan, Mohd Rosli / Poovaneshvaran, Sharvin / Tai, Guo / Wang, Hainian	Application of diluted methanol to allow the production of latex modified asphalt mixture with lower energy consumption	120028
Sudarsanan, Nithin / Fonte, Benjamin Robert / Kim, Youngsoo Richard	Application of time-temperature superposition principle to pull-off tensile strength of asphalt tack coats	120798
Li, Mingqi / Chen, Huisu / Lin, Jianjun / Lura, Pietro	Areal analysis induced bias on interface thickness around ovoidal particles	120583
Yang, Tao / Zhang, Zuhua / Wang, Qiang / Wu, Qisheng	ASR potential of nickel slag fine aggregate in blast furnace slag-fly ash geopolymer and Portland cement mortars	119990
Hassi, Sara / Ebn Touhami, Mohamed / Boujad, Abdelkbir / Benqlilou, Hanane	Assessing the effect of mineral admixtures on the durability of Prestressed Concrete Cylinder Pipe (PCCP) by means of electrochemical impedance spectroscopy	120925
Kim, Hong Gi / Qudoos, Abdul / Jeon, In Kyu / Ryou, Jae Suk	Assessment of PCM/SiC-based composite aggregate in concrete: Mechanical, physical and microstructural properties	120088
Zhang, Tong / Lyu, Xuetao / Liu, Haiqing / Zhang, Liqiang / Wang, Junfeng / Gao, Shan	Axial performance degradation of squared CFST stubs in severe cold and acid rain area	120612
Bertola, Federica / Gastaldi, Daniela / Irico, Sara / Paul, Geo / Canonico, Fulvio	Behavior of blends of CSA and Portland cements in high chloride environment	120852
Pallarés, L. / Agüero Ramon-Llin, A. / Martí-Vargas, J. R. / Pallarés, F. J.	Behaviour of headed studs subjected to cyclic shear in steel frames with reinforced concrete infill walls	120018
Morales-Cantero, Alejandro / De la Torre, Angeles G. / Cuesta, Ana / Fraga-Lopez, Edmundo / Shirani, Shiva / Aranda, Miguel A. G.	Belite hydration at high temperature and pressure by in situ synchrotron powder diffraction	120825
Lorenzo, Rodolfo / Mimendi, Leonel / Li, Haitao / Yang, Dong	Bimodulus bending model for bamboo poles	120876
Yuan, Guanglin / Zhao, Zhiyuan / Li, Qingtao	Bond behavior between cement-based grouting material and steel bar under repetitive loading after being exposed to high temperature at early age	120023
Hu, Xiaopeng / Peng, Gang / Niu, Ditao / Wu, Xiao / Zhang, Lu	Bond behavior between deformed steel bars and cementitious grout	120810
Qi, Ai / Liu, Xuhong / Xu, Rongjian / Huang, Yusheng	Bond behavior of steel reinforcement in concrete containing ferronickel slag and blast furnace slag powder	120884
Li, Mingli / Liu, Zhiyong / Yang, Zhengguang / Wang, Zixiao / Yuan, Hui	Bond-slip behaviors between reinforced concrete and coated rebar via a new strain monitoring method and FEA simulation	120402
Zhang, Jinyuan / Ke, Yu / Zhang, Jinrui / Han, Qinghua / Dong, Biqin	Cement paste with well-dispersed multi-walled carbon nanotubes: Mechanism and performance	120746
Fioroni, Carlos Alexandre / Innocentini, Murilo Daniel de Mello / de Los Dolores, Gonzalo Mármol / Tonoli, Gustavo Henrique Denzin / de Paula, Gustavo Rocha / Savastano, Holmer	Cement-based corrugated sheets reinforced with polypropylene fibres subjected to a high-performance curing method	120791
Wang, Dongyun / Cui, Chong / Chen, Xue-Fei / Zhang, Shihua / Ma, Hailong	Characteristics of autoclaved lightweight aggregates with quartz tailings and its effect on the mechanical properties of concrete	120110
Malathy, Ramalingam / Chung, Ill-Min / Prabakaran, Mayakrishnan	Characteristics of fly ash based concrete prepared with bio admixtures as internal curing agents	120596
Li, Jinhui / Liu, Xinquan / Yang, Qingrui / Hou, Dongshuai / Hu, Xiaoxia / Ye, Qiang / Wang, Di / Ding, Qingjun	Characterization of fly ash-cement paste and molecular structure in the presence of seawater by 27Al and 29Si MAS NMR spectroscopy	120823
Wang, Xuan / Lam, Chi Chiu / Iu, Vai Pan	Characterization of mechanical behaviour of grey clay brick masonry in China	119964
Brito, Flávia Maria Silva / Paes, Juarez Benigno / da Silva Oliveira, José Tarcísio / Arantes, Marina Donária Chaves / Dudecki, Larissa	Chemical characterization and biological resistance of thermally treated bamboo	120033
Kim, JiHoon / Kitagaki, Ryoma	Chemical properties and mass transfer resistance of mortar surface modified with silicate-based surface impregnant	120806
Réus, G. C. / Medeiros, M. H. F.	Chemical realkalization for carbonated concrete treatment: Alkaline solutions and application methods	120880
Ibrahim, Mohammed / Rahman, Muhammed Kalimur / Megat Johari, Megat Azmi / Nasir, Muhammad / Adeoluwa Oladapo, Ewebajo	Chloride diffusion and chloride-induced corrosion of steel embedded in natural pozzolan-based alkali activated concrete	120669
Xu, Chao / Li, Haoxin / Dong, Biqin / Yang, Xiaojie	Chlorine immobilization and performances of cement paste/mortar with C-S-Hs-PCE and calcium chloride	120694
Cerqueira da Silva, Rodrigo Rogerio / Gonçalves, Raquel / Bertoldo, Cinthya	Classification and inspection of reinforced concrete elements for use in retaining walls using ultrasound tests	120010
Mermerdaş, Kasım / İpek, Süleyman / Algin, Zeynep / Ekmen, Şevin / Güneş, İsmail	Combined effects of microsilica, steel fibre and artificial lightweight aggregate on the shrinkage and mechanical performance of high strength cementitious composite	120048
Amini Pishro, Ahad / Feng, Xiong / Ping, Yang / Dengshi, Huang / Shirazinejad, Reza S.	Comprehensive equation of local bond stress between UHPC and reinforcing steel bars	119942
Zeng, Jun-Jie / Duan, Zhi-Jian / Gao, Wan-Yang / Bai, Yu-Lei / Ouyang, Li-Jun	Compressive behavior of FRP-wrapped seawater sea-sand concrete with a square cross-section	120881
Farhan, Ahmed Hilal / Dawson, Andrew Robert / Thom, Nicholas Howard	Compressive behaviour of rubberized cement-stabilized aggregate mixtures	120038
Oneschkow, Nadja / Hümme, Julian / Lohaus, Ludger	Compressive fatigue behaviour of high-strength concrete in a dry and wet environment	119700
Kaghazchi, Laleh / Naderi, Reza / Ramezanzadeh, Bahram	Construction of a high-performance anti-corrosion film based on the green tannic acid molecules and zinc cations on steel: Electrochemical/Surface investigations	120861
Huang, Xuewei / Ge, Jianzhou / Zhao, Jun / Zhao, Wei	A continuous damage model of Q690D steel considering the influence of Lode parameter and its application	120067
Walubita, Lubinda F. / Mahmoud, Enad / Fuentes, Luis / Prakoso, Adrianus / Lee, Sang I. / Souliman, Mena / Komba, Julius J.	Correlating the asphalt-binder high-temperature properties (DSR) to HMA permanent deformation (RLPD) and field rutting: A laboratory-field study	120761
Ding, Jitong / Jiang, Jiwang / Ni, Fujian / Dong, Qiao / Zhao, Zili	Correlation investigation of fatigue indices of fine aggregate matrix (FAM) and asphalt mixture containing reclaimed asphalt pavement materials	120646
Afshar, Alireza / Jahandari, Soheil / Rasekh, Haleh / Shariati, Mahdi / Afshar, Abdollah / Shokrgozar, Ali	Corrosion resistance evaluation of rebars with various primers and coatings in concrete modified with different additives	120034
Zhu, Xingyi / Fan, Yinhong / Yu, Ying / Gilabert, Francisco A.	Crack propagation and microwave healing of Ferrite-filled asphalt mixes based on image correlation observations	119978
Carballosa, P. / Revuelta, D. / Fernández-Escandón, Alfredo	Design of filling self-stressing concrete to use in strengthening of columns by prefabricated jacketing	120714
Barra, Breno / Neckel, Glauciano / Momm, Leto / Guerrero, Yader / Mikowski, Alexandre / de Melo, João Victor Staub / Nguyen, Mai-Lan / Hughes, Gary B.	Design parameters and associated quantitative damage analyses of an asphalt concrete airfield runway	120809
Zielińska, Monika / Rucka, Magdalena	Detection of debonding in reinforced concrete beams using ultrasonic transmission tomography and hybrid ray tracing technique	120104
Chen, Dongdong / Montano, Victor / Huo, Linsheng / Fan, Shuli / Song, Gangbing	Detection of subsurface voids in concrete-filled steel tubular (CFST) structure using percussion approach	119761
Zhang, Hongen / Li, Lang / Yuan, Cheng / Wang, Qingyuan / Sarker, Prabir Kumar / Shi, Xiaoshuang	Deterioration of ambient-cured and heat-cured fly ash geopolymer concrete by high temperature exposure and prediction of its residual compressive strength	120924
Hu, Zhihui / Xu, Tao / Liu, Pengfei / Jin, Guanglai	Developed photocatalytic semi-flexible pavement for automobile exhaust purification using iron-doped titanium dioxide	119924
Karnati, Sidharth Reddy / Høgsaa, Bjarke / Zhang, Lifeng / Fini, Ellie H.	Developing carbon nanoparticles with tunable morphology and surface chemistry for use in construction	120780
Sha, Fei / Jin, Qing / Liu, Peng	Development of effective microfine cement-based grouts (EMCG) for porous and fissured strata	120775
Arroyo, F. N. / Christoforo, A. L. / Salvini, V. R. / Pelissari, P. I. B. G. B. / Pandolfelli, V. C. / Luz, A. P. / Cardoso, C. A.	Development of plaster foam for thermal and acoustic applications	120800
Mousavi Siamakani, Seyed Yaser / Jiradilok, Punyawut / Nagai, Kohei / Sahamitmongkol, Raktipong	Discrete mesoscale analysis of adhesive anchors under tensile load taking into account post-installed reinforcement	120778
Vereecken, Evy / Schůtová, Petra / Roels, Staf	Does kaolin clay really create a perfect hydraulic interface contact between materials?	120700
Dang, Juntao / Zhao, Jun / Pang, Sze Dai / Zhao, Shunbo	Durability and microstructural properties of concrete with recycled brick as fine aggregates	120032
Papachristoforou, M. / Anastasiou, E. K. / Papayianni, I.	Durability of steel fiber reinforced concrete with coarse steel slag aggregates including performance at elevated temperatures	120569
Gounni, Ayoub / Louahlia, Hasna	Dynamic behavior and economic analysis of sustainable building integrating cob and phase change materials	120795
Zhao, Kai / Liang, Yongning / Ji, Tao / Lu, Yue / Lin, Xujian	Effect of activator types and concentration of CO2 on the steel corrosion in the carbonated alkali-activated slag concrete	120044
Wang, Lusheng / Shen, Aiqin / Yao, Jialiang	Effect of different coarse aggregate surface morphologies on cement emulsified asphalt adhesion	120030
Xing, Xiangyang / Chen, Shihui / Li, Yang / Pei, Jianzhong / Zhang, Jiupeng / Wen, Yong / Li, Rui / Cui, Shengchao	Effect of different fibers on the properties of asphalt mastics	120005
Binti Joohari, Ilya / Giustozzi, Filippo	Effect of different vinyl-acetate contents in hybrid SBS-EVA modified bitumen	120574
Ge, Xin / Ling, Liang / Yuan, Xuancheng / Wang, Kaiyun	Effect of distributed support of rail pad on vertical vehicle-track interactions	120607
Rashid, Raizal S. M. / Salem, S. Mohammed / Azreen, N. M. / Voo, Y. L. / Haniza, M. / Shukri, A. A. / Yahya, Mohd-Syukri	Effect of elevated temperature to radiation shielding of ultra-high performance concrete with silica sand or magnetite	120567
Benmahiddine, Ferhat / Cherif, Rachid / Bennai, Fares / Belarbi, Rafik / Tahakourt, Abdelkader / Abahri, Kamilia	Effect of flax shives content and size on the hygrothermal and mechanical properties of flax concrete	120077
Mullapudi, Ramya Sri / Aparna Noojilla, Satya Lakshmi / Kusam, Sudhakar Reddy	Effect of initial damage on healing characteristics of bituminous mixtures containing reclaimed asphalt material (RAP)	120808
Zhang, Peng / Gao, Zhen / Shi, Yan / Lin, Yuqiang / Li, Jiazheng	Effect of large broken stone content on properties of roller compacted concrete based on fractal theory	120821
Han, Kaidong / Xiao, Jia / Zhang, Zedi / Wang, Jialei / Hu, Xiaoyan	Effect of particle size distribution on flocculation and its growth in cement-ground limestone suspensions	120047
Chakilam, Sirisha / Cui, Liang	Effect of polypropylene fiber content and fiber length on the saturated hydraulic conductivity of hydrating cemented paste backfill	120854
Chen, Yu / Jansen, Koen / Zhang, Hongzhi / Rodriguez, Claudia Romero / Gan, Yidong / Copuroglu, Oguzhan / Schlangen, Erik	Effect of printing parameters on interlayer bond strength of 3D printed limestone-calcined clay-based cementitious materials: An experimental and numerical study	120094
Jagadesh, P. / Murthy, A. Ramachandra / Murugesan, R.	Effect of processed sugar cane bagasse ash on mechanical and fracture properties of blended mortar	120846
Bayesteh, Hamed / Sharifi, Mahdi / Haghshenas, Ali	Effect of stone powder on the rheological and mechanical performance of cement-stabilized marine clay/sand	120792
Zhang, Zhigang / Liu, Jin-Cheng / Xu, Xiaoqing / Yuan, Liqun	Effect of sub-elevated temperature on mechanical properties of ECC with different fly ash contents	120096
Bai, Shuai / Guan, Xinchun / Li, Guoyu	Effect of the early-age frost damage and nano-SiO2 modification on the properties of Portland cement paste	120098
Maagi, Mtaki Thomas / Jun, Gu	Effect of the particle size of nanosilica on early age compressive strength in oil-well cement paste	120393
Saboo, Nikhil / Nirmal Prasad, A. / Sukhija, Mayank / Chaudhary, Mohit / Chandrappa, Anush K.	Effect of the use of recycled asphalt pavement (RAP) aggregates on the performance of pervious paver blocks (PPB)	120581
Al-mashhadani, Mukhallad M. / Canpolat, Orhan	Effect of various NaOH molarities and various filling materials on the behavior of fly ash based geopolymer composites	120560
Ameri, Mahmoud / Afshin, Abolfazl / Ebrahimzadeh Shiraz, Mehdi / Yazdipanah, Farzad	Effect of wax-based warm mix additives on fatigue and rutting performance of crumb rubber modified asphalt	120882
xie, Zhiyi / Zhou, Han / Li, Qingchao / He, Cheng / Zhang, Shupeng / Li, Dongxu	Effects of colloidal nanosilica/polycarboxylate ether superplasticizer nanocomposite and graphene oxide on properties of fly ash blended cement	120767
Raju, Ramiz Ahmed / Lim, Sopokhem / Akiyama, Mitsuyoshi / Kageyama, Takumi	Effects of concrete flow on the distribution and orientation of fibers and flexural behavior of steel fiber-reinforced self-compacting concrete beams	119963
Zhang, Xiuzhi / Yang, Qing / Shi, Yanyu / Zheng, Guofa / Li, Qinfei / Chen, Heng / Cheng, Xin	Effects of different control methods on the mechanical and thermal properties of ultra-light foamed concrete	120082
Zhu, Xiaoliang / Guo, Zhaoheng / Yang, Wen / Cheng, Baojun	Effects of double expansion agents on the properties of interlayer in roller-compacted concrete	120909
Gomes, Carlos Marmorato / de Oliveira, Adla Kellen Dionisio Sousa	Effects of filler carbonates on magnesium-oxide based pastes	119913
Das, Souvik / Sobuz, Md. Habibur Rahman / Tam, Vivian W. Y. / Akid, Abu Sayed Mohammad / Sutan, Norsuzailina Mohamed / Rahman, F. M. Mynur	Effects of incorporating hybrid fibres on rheological and mechanical properties of fibre reinforced concrete	120561
Li, Xiazhen / Mou, Qunying / Ren, Haiqing / Li, Xianjun / Zhong, Yong	Effects of moisture content and load orientation on dowel-bearing behavior of bamboo scrimber	120864
Nguyen, Hoang Viet / Nakarai, Kenichiro / Pham, Kien Hoang / Kajita, Saeko / Sagawa, Takahiro	Effects of slag type and curing method on the performance of expansive concrete	120422
Li, Zepeng / Liu, Xiaoming / Li, Yong / Ren, Yongyu / Wang, Yaguang / Zhang, Wei	Effects of sulfate on the mechanical performances and hydration characteristics of red mud based non-burnt brick	120722
Feng, Ponan / Wang, Hainian / Ding, Heyang / Xiao, Jinkun / Hassan, Marwa	Effects of surface texture and its mineral composition on interfacial behavior between asphalt binder and coarse aggregate	120869
Dey, Gopinandan / Ganguli, Abhijit / Bhattacharjee, Bishwajit / Kumar Gandhi, Tapan	Electrical response-based technique for estimation of degree of moisture saturation in cement concrete and mortar in drying and wetting cycle	120855
Ghanei, Anis / Eskandari-Naddaf, Hamid / Ozbakkaloglu, Togay / Davoodi, Ali	Electrochemical and statistical analyses of the combined effect of air-entraining admixture and micro-silica on corrosion of reinforced concrete	120768
Ricci, C. / Gambino, F. / Nervo, M. / Piccirillo, A. / Scarcella, A. / Zenucchini, F. / Ramil, A. / Pozo-Antonio, J. S.	Enhancement of graffiti removal from heritage stone by combining laser ablation and application of a solvent mixture	119934
Su, Chang / Wang, Xin / Ding, Lining / Wu, Zhishen	Enhancement of mechanical behavior of FRP composites modified by silica nanoparticles	120769
Celik, Selen Ezgi / Gulen, Jale / Viles, Heather A.	Evaluating the effectiveness of DAP as a consolidant on Turkish building stones	120765
Shackil, George / Ali, Ayman / Mehta, Yusuf / Papuc, Dorin	Evaluating the laboratory cracking performance of pavement preservation materials using the Texas overlay tester	120802
Perera, Sahan / Arulrajah, Arul / Wong, Yat / Maghool, Farshid / Horpibulsuk, Suksun	Evaluation of shear strength properties of unbound PET plastic in blends with demolition wastes	120545
Hong, Jinyoung / Kim, Ryulri / Lee, Chang Hoon / Choi, Hajin	Evaluation of stiffening behavior of concrete based on contactless ultrasonic system and maturity method	120717
Zhang, Zige / Jung, Donghyuk / Andrawes, Bassem	Evaluation of surface roughness and bond-slip behavior of new textured epoxy-coated reinforcing bars	120762
Heras Murcia, Daniel / Genedy, Moneeb / Reda Taha, M. M.	Examining the significance of infill printing pattern on the anisotropy of 3D printed concrete	120559
Xiang, Jichun / He, Yan / Liu, Leping / Zheng, Hao / Cui, Xuemin	Exothermic behavior and drying shrinkage of alkali-activated slag concrete by low temperature-preparation method	120056
Liu, Leping / Xie, Maojia / He, Yan / Li, Yuanyuan / Wei, Anhua / Cui, Xuemin / Shi, Caijun	Expansion behavior and microstructure change of alkali-activated slag grouting material in carbonate environment	120593
Nicoletti, Vanni / Arezzo, Davide / Carbonari, Sandro / Gara, Fabrizio	Expeditious methodology for the estimation of infill masonry wall stiffness through in-situ dynamic tests	120807
Yu, Huanan / Li, Shunjun / Qian, Guoping / Gong, Xiangbing / Wang, Kun	Experiment evaluation on the surface treatment of phosphorus slag (PS) micropowder for asphalt modification	119931
Chen, Suwen / Lu, Yujia / Zhang, Yang / Shao, Xiao	Experimental and analytical study on uniaxial tensile property of ionomer interlayer at different temperatures and strain rates	120058
Bompa, D. V. / Elghazouli, A. Y.	Experimental and numerical assessment of the shear behaviour of lime mortar clay brick masonry triplets	120571
Ji Yadav, Shiv Kumar / Vedrtnam, Ajitanshu / Gunwant, Dheeraj	Experimental and numerical study on mechanical behavior and resistance to natural weathering of sugarcane leave reinforced polymer composite	120785
Chen, Jiawen / Tian, Cong / Wei, Xiaosheng	Experimental and simulation study on chloride permeability in cement paste	120600
Zhang, Yige / Li, Linfei / Xi, Yunping / Hubler, Mija	Experimental and theoretical study of the restrained shrinkage cracking of early age well cement	120368
Chen, Jiawei / Xiong, Haibei / Wang, Zhifang / Yang, Linqing	Experimental buckling performance of eucalyptus-based oriented oblique laminated strand lumber columns under centric and eccentric compression	120072
Halvaei, Mana / Jamshidi, Masoud / Latifi, Masoud / Ejtemaei, Mojtaba	Experimental investigation and modelling of flexural properties of carbon textile reinforced concrete	120877
Nasrollahzadeh, Kourosh / Zare, Mostafa	Experimental investigation on axially loaded adobe masonry columns confined by polymeric straps	119895
Zheng, Wei / Li, Yue / Zhou, Yu / Zhu, Yixin / Lu, Weidong / Liu, Weiqing / Wang, Hongli	Experimental investigation on the behavior of plybamboo sheathing-to-framing screwed connections	120856
Meng, Chaomei / Li, Wenzhe / Cai, Liangcai / Shi, Xingang / Jiang, Chunlin	Experimental research on durability of high-performance synthetic fibers reinforced concrete: Resistance to sulfate attack and freezing-thawing	120055
Suchorzewski, Jan / Prieto, Miguel / Mueller, Urs	An experimental study of self-sensing concrete enhanced with multi-wall carbon nanotubes in wedge splitting test and DIC	120871
Sujay, H. M. / Nair, Nishant A. / Sudarsana Rao, H. / Sairam, V.	Experimental study on durability characteristics of composite fiber reinforced high-performance concrete incorporating nanosilica and ultra fine fly ash	120738
Yang, Rongzhou / Xu, Ying / Chen, Peiyuan / Wang, Jia	Experimental study on dynamic mechanics and energy evolution of rubber concrete under cyclic impact loading and dynamic splitting tension	120071
Maqsood, Zain / Koseki, Junichi / Ahsan, Md. Kamrul / Shaikh, Masum / Kyokawa, Hiroyuki	Experimental study on hardening characteristics and loading rate dependent mechanical behaviour of gypsum mixed sand	119992
Zeng, Zhiping / Shuaibu, Abdulmumin Ahmed / Liu, Fushan / Ye, Mengxuan / Wang, Weidong	Experimental study on the vibration reduction characteristics of the ballasted track with rubber composite sleepers	120766
Shi, Jingtao / Zhao, Pinhui / Fan, Weiyu / Yang, Ziqiao / Lin, Yi / Ouyang, Jian	Facile preparation and application performance evaluation of SBS/C9 petroleum resin blends as modifier for high viscosity asphalt	120073
Liang, Jia / Gu, Xingyu / Chen, Yizheng	Fast and robust pavement crack distress segmentation utilizing steerable filtering and local order energy	120084
Tan, Jiawei / Cai, Jingming / Huang, Linchong / Yang, Qiuning / Mao, Mingjie / Li, Jiabin	Feasibility of using microwave curing to enhance the compressive strength of mixed recycled aggregate powder based geopolymer	120897
Fares, Galal / Albaroud, Mahmoud Hamad / Khan, M. Iqbal	Fine limestone dust from ornamental stone factories: a potential filler in the production of High-Performance Hybrid Fiber-Reinforced Concrete	120009
Armanasco, Alessandro / Foppoli, Dario	A flat jacks method for in situ testing of brick masonry shear characteristics	119840
Ali, Babar / Qureshi, Liaqat Ali / Khan, Sibghat Ullah	Flexural behavior of glass fiber-reinforced recycled aggregate concrete and its impact on the cost and carbon footprint of concrete pavement	120820
Shen, Ling-hua / Wang, Ji-yang / Xu, Shi-lang / Zhao, Xin / Peng, Yu	Flexural behavior of TRC contained chopped fibers subjected to high temperature	120562
Gopinath, Smitha / Prakash, Amar / Ahmed, A.K Farvaze	Flexural impact response and energy absorption characteristics of textile reinforced mortar	120630
Wang, Zhixiang / Li, Jiange / Zhang, Zhengqi / Jia, Meng / Yang, Jianhua	Formulation of a new warm-mix recycling agent and its rejuvenating effect on aged asphalt	120804
Lyngdoh, Gideon A. / Nayak, Sumeru / Krishnan, N. M. Anoop / Das, Sumanta	Fracture toughness of fly ash-based geopolymer gels: Evaluations using nanoindentation experiment and molecular dynamics simulation	120797
Hu, Lingling / He, Zhen	A fresh perspective on effect of metakaolin and limestone powder on sulfate resistance of cement-based materials	119847
Finocchiaro, Claudio / Barone, Germana / Mazzoleni, Paolo / Leonelli, Cristina / Gharzouni, Ameni / Rossignol, Sylvie	FT-IR study of early stages of alkali activated materials based on pyroclastic deposits (Mt. Etna, Sicily, Italy) using two different alkaline solutions	120095
Fang, Mingjing / Hu, Ting / Rose, Jerry G.	Geometric composition, structural behavior and material design for asphalt trackbed: A review	120755
Jin, Hesong / Xu, Haiyan / Yang, Shiyu / Xu, Ziyi / Li, Fuhai / Hu, Zhiming	Grey target decision analysis of optimum mixing ratio of LWAS based on the comprehensive performance	120570
Mahmood, Aziz Hasan / Foster, Stephen J. / Castel, Arnaud	High-density geopolymer concrete for Port Kembla breakwater upgrade	120920
Valdés-Vidal, G. / Calabi-Floody, A. / Sanchez-Alonso, E. / Díaz, C. / Fonseca, C.	Highway trial sections: Performance evaluation of warm mix asphalt and recycled warm mix asphalt	120069
Xu, Zhenhai / Gao, Jianming / Zhou, Zonghui / Zhao, Yasong / Chen, Xuemei	Hydration and microstructure of tricalcium silicate incorporating nano-TiO2	120805
Zhou, Changjun / Lan, Guoshu / Cao, Peng / Tang, Changbing / Cao, Qi / Xu, Yunxi / Feng, Decheng	Impact of freeze-thaw environment on concrete materials in two-lift concrete pavement	120070
Rabat, Á. / Tomás, R. / Cano, M. / Miranda, T.	Impact of water on peak and residual shear strength parameters and triaxial deformability of high-porosity building calcarenite stones: Interconnection with their physical and petrological characteristics	120789
Zhang, Na / Xu, Mingfeng / Song, Song / Li, Hui / Zhou, Jian / Ma, Guowei	Impact resistance of basalt fiber strain-hardening cementitious composites exposed to elevated temperatures	120081
Mahmoud, Ahmed Abdulhamid / Elkatatny, Salaheldin	Improved durability of Saudi Class G oil-well cement sheath in CO2 rich environments using olive waste	120623
Li, Haoxin / Gu, Linan / Dong, Biqing / Chen, Qing / Xu, Chao / Yang, Xiaojie / Wang, Weishan	Improvements in setting behavior and strengths of cement paste/mortar with EVA redispersible powder using C-S-Hs-PCE	120097
Yıldız, Kürşat / Atakan, Mert	Improving microwave healing characteristic of asphalt concrete by using fly ash as a filler	120448
Samieadel, Alireza / Rajib, Amirul Islam / Phani Raj Dandamudi, Kodanda / Deng, Shuguang / Fini, Elham H.	Improving recycled asphalt using sustainable hybrid rejuvenators with enhanced intercalation into oxidized asphaltenes nanoaggregates	120090
Liu, Mengdi / Xia, Jun / Chin, Chee Seong / Liu, Zuowei	Improving the properties of recycled aggregate pervious pavement blocks through bio-mineralization	120065
Snoeck, D. / Moerkerke, B. / Mignon, A. / De Belie, N.	In-situ crosslinking of superabsorbent polymers as external curing layer compared to internal curing to mitigate plastic shrinkage	120819
Qiu, Qiwen / Zhu, Jihua / Dai, Jian-Guo	In-situ X-ray microcomputed tomography monitoring of steel corrosion in engineered cementitious composite (ECC)	120844
Huang, Liming / Yang, Zhenghong / Wang, Shunfeng	Influence of calcination temperature on the structure and hydration of MgO	120776
Ferreira, Saulo Rocha / Rodrigues Sena Neto, Alfredo / de Andrade Silva, Flávio / Gomes de Souza, Fernando / Filho, Romildo Dias Toledo	The influence of carboxylated styrene butadiene rubber coating on the mechanical performance of vegetable fibers and on their interface with a cement matrix	120770
Gracioli, B. / Angulski da Luz, C. / Beutler, C. S. / Pereira Filho, J. I. / Frare, A. / Rocha, J. C. / Cheriaf, M. / Hooton, R. D.	Influence of the calcination temperature of phosphogypsum on the performance of supersulfated cements	119961
Almada, Bruna Silva / Melo, Luciane de Souza / Dutra, Julia Baptistella / Bubani, Larissa Cardoso / Brigolini Silva, Guilherme Jorge / dos Santos, White Jose / Paulino Aguilar, Maria Teresa	Influence of the heterogeneity of waste from wet processing of ornamental stones on the performance of Portland cement composites	120036
Jiang, Xi / Xiao, Rui / Ma, Yuetan / Zhang, Miaomiao / Bai, Yun / Huang, Baoshan	Influence of waste glass powder on the physico-mechanical properties and microstructures of fly ash-based geopolymer paste after exposure to high temperatures	120579
Xue, Shanbin / Meng, Fanqiang / Zhang, Peng / Bao, Jiuwen / Wang, Junjie / Zhao, Kaiyue	Influence of water re-curing on microstructure of heat-damaged cement mortar characterized by low-field NMR and MIP	120532
Fang, Kun / Fall, Mamadou	Insight into the mode I and mode II fracture toughness of the cemented backfill-rock interface: Effect of time, temperature and sulphate	120860
Li, Jinhui / Gao, Lanjuan / Hou, Dongshuai / Wang, Pan / Zhou, Yang / Ding, Qingjun / Xiong, Chenchen	Insights on the ion migration throughout the nano-channel of ettringite under an external electric field: Structure, dynamics, and mechanisms	120074
Diab, Aboelkasim / You, Zhanping / Adhikari, Sanjeev / You, Lingyun / Li, Xuelian / El-Shafie, Mohamed	Investigating the mechanisms of rubber, styrene-butadiene-styrene and ethylene-vinyl acetate in asphalt binder based on rheological and distress-related tests	120744
Kang, Shao-Bo / Wang, Shan / Long, Xu / Wang, Dan-Dan / Wang, Chun-Yan	Investigation of dynamic bond-slip behaviour of reinforcing bars in concrete	120824
Wang, Ruiyang / Yu, Jianying / Gu, Shunjie / He, Peng / Han, Xiaobin / Liu, Quantao	Investigation of migration and self-healing ability of ion chelator in cement-based materials by a novel method	120917
Çetintaş, Sevgi / Akboğa, Zübeyde	Investigation of resistance to ageing by SO2 on some building stone	120341
Yang, Li / Xi, Dai / Jianzhong, Pei / Rui, Li / Jiupeng, Zhang / Tao, Liu	Investigation on preparation and rheological properties of grafted organic long-chain carbonitride (CNDC) modified asphalt	120539
Ameli, Alireza / Nasr, Danial / Babagoli, Rezvan / Pakshir, Amir Hossein / Norouzi, Navid / Davoudinezhad, Siamak	Laboratory evaluation of rheological behavior of binder and performance of stone matrix asphalt (SMA) mixtures containing zycotherm nanotechnology, sasobit, and rheofalt warm mixture additives	120757
Menchaca-Ballinas, Luis Edgar / Escalante-García, J. I.	Limestone as aggregate and precursor in binders of waste glass activated by CaO and NaOH	120013
Behnood, Ali / Daneshvar, Dana	A machine learning study of the dynamic modulus of asphalt concretes: An application of M5P model tree algorithm	120544
Wang, Lan / Shan, Mingyu / Chang, Chunqing / Zhou, Xiaodong	The macro-and meso-cracking characteristics of warm mix crumb rubber asphalt mastics before and after aging	120724
Safari Tarbozagh, Alireza / Rezaifar, Omid / Gholhaki, Majid / Abavisani, Iman	Magnetic enhancement of carbon nanotube concrete compressive behavior	120772
Platt, Shawn / Maskell, Daniel / Walker, Pete / Laborel-Préneron, Aurélie	Manufacture and characterisation of prototype straw bale insulation products	120035
Shah, Syyed Adnan Raheel / Anwar, Muhammad Kashif / Arshad, Hunain / Qurashi, Muhammad Ahmed / Nisar, Aqsa / Khan, Asfar Nasir / Waseem, Muhammad	Marshall stability and flow analysis of asphalt concrete under progressive temperature conditions: An application of advance decision-making approach	120756
Pang, Xueyu / Cuello Jimenez, Walmy / Singh, John	Measuring and modeling cement hydration kinetics at variable temperature conditions	120788
Aydın, Abdulkadir Cüneyt / Alcan, Haluk Görkem / Bayrak, Barış / Kılıç, Mahmut / Maali, Mahyar	The mechanical behavior of thermally enhanced polypropylene concrete	120578
Trabelsi, Abderraouf / Kammoun, Zied	Mechanical properties and impact resistance of a high-strength lightweight concrete incorporating prickly pear fibres	119972
Dan, Han-Cheng / Yang, Dong / Zhao, Lian-heng / Wang, Shi-ping / Zhang, Zhi	Meso-scale study on compaction characteristics of asphalt mixtures in Superpave gyratory compaction using SmartRock sensors	120874
Qu, Bo / Martin, A. / Pastor, J. Y. / Palomo, A. / Fernández Jiménez, A.	Microstructural characterisation of hybrid cement after exposure to high temperatures	120843
Ghoddousi, Parviz / Zareechian, Maziar / Shirzadi Javid, Ali Akbar / Habibnejad korayem, Asghar	Microstructural study and surface properties of concrete pavements containing nanoparticles	120103
Tam, Vivian W. Y. / Butera, Anthony / Le, Khoa N.	Microstructure and chemical properties for CO2 concrete	120584
Aydin, Murat / Yılmaz Aydın, Tuğba	Moisture dependent elastic properties of naturally aged black pine wood	120752
Wang, Zhenbo / Liu, Chang / Zuo, Jianping / Zhang, Zishan / Han, Yudong / Man, Shihan	Monitoring and modeling the damage evolution in engineered cementitious composites subjected to sulfate attack through continuous ultrasonic measurements	120799
Wang, Xinzhou / Yuan, Zhurun / Zhan, Xianxu / Li, Yongcheng / Li, Maoyi / Shen, Liuhan / Cheng, Dali / Li, Yanjun / Xu, Bin	Multi-scale characterization of the thermal – mechanically isolated bamboo fiber bundles and its potential application on engineered composites	120866
Sassoni, Enrico / Ugolotti, Greta / Pagani, Michele	Nanolime, nanosilica or ammonium phosphate? Laboratory and field study on consolidation of a byzantine marble sarcophagus	120784
Shi, Hao / Song, Lei / Chen, Wenlong / Zhang, Houquan / Wang, Guozhu / Yuan, Guotao / Zhang, Wenliang / Chen, Guiwu / Wang, Yu / Lin, Gang	New non-destructive method for testing the strength of cement mortar material based on vibration frequency of steel bar: Theory and experiment	120931
Salsavilca, Jhoselyn / Tarque, Nicola / Yacila, Jhair / Camata, Guido	Numerical analysis of bonding between masonry and steel reinforced grout using a plastic–damage model for lime–based mortar	120373
Sok, Tetsya / Kim, Young Kyu / Lee, Seung Woo	Numerical approach to predict zero-stress temperature in concrete pavements	120076
Jing, Guoqing / Wang, Jingru / Wang, Haoyu / Siahkouhi, Mohammad	Numerical investigation of the behavior of stone ballast mixed by steel slag in ballasted railway track	120015
Sonebi, M. / Abdalqader, A. / Fayyad, T. / Perrot, A. / Bai, Y.	Optimisation of rheological parameters, induced bleeding, permeability and mechanical properties of supersulfated cement grouts	120078
Sebaibi, Nassim / Khadraoui-Mehir, Fouzia / Kourtaa, Salim / Boutouil, Mohamed	Optimization of non-autoclaved aerated insulating foam using bio-based materials	120822
Rezaei Rad, Aryan / Burton, Henry / Weinand, Yves	Out-of-plane (flatwise) behavior of through-tenon connections using the integral mechanical attachment technique	120001
Abate, Selamu Yihune / Park, Solmoi / Kim, Hyeong-Ki	Parametric modeling of autogenous shrinkage of sodium silicate-activated slag	120747
Raza, Ali / Shah, Syyed Adnan Raheel / Kazmi, Syed Noman Hussain / Ali, Rana Qasim / Akhtar, Hasnain / Fakhar, Saleem / Khan, Farukh Nawaz / Mahmood, Atif	Performance evaluation of concrete developed using various types of wastewater: A step towards sustainability	120608
Mohammed Babalghaith, Ali / Koting, Suhana / Ramli Sulong, Nor Hafizah / Karim, Mohamed Rehan / Mohammed AlMashjary, Badr	Performance evaluation of stone mastic asphalt (SMA) mixtures with palm oil clinker (POC) as fine aggregate replacement	120546
Zhang, Xiaoyan / Zhao, Min / Liu, Lang / Xia, Xiang / Zhang, Jin / Zhao, Chenglin / Bu, Baoyun	Phase-change heat storage backfill: Experimental study on rheological properties of backfill slurry with paraffin added	120736
Ozturk, Hande Isik / Rashidzade, Isfandiyar	A photogrammetry based method for determination of 3D morphological indices of coarse aggregates	120794
Shi, Feng / Pham, Thong M. / Hao, Hong / Hao, Yifei	Post-cracking behaviour of basalt and macro polypropylene hybrid fibre reinforced concrete with different compressive strengths	120108
Goyal, Arpit / Olorunnipa, Ezekiel Kehinde / Pouya, Homayoon Sadeghi / Ganjian, Eshmaiel / Olubanwo, Adegoke Omotayo	Potential and current distribution across different layers of reinforcement in reinforced concrete cathodic protection system- A numerical study	120580
Raavi, Satya Sai Deep / Tripura, Deb Dulal	Predicting and evaluating the engineering properties of unstabilized and cement stabilized fibre reinforced rammed earth blocks	120845
Fathi, Hamidreza / Nasir, Vahid / Kazemirad, Siavash	Prediction of the mechanical properties of wood using guided wave propagation and machine learning	120848
Zhang, Yijie / Wang, S. / Li, Liping / Han, Jin / Zhang, Bo / Hou, Dongshuai / Wang, Jing / Lin, Chunjin	A preliminary study of the properties of potassium phosphate magnesium cement-based grouts admixed with metakaolin, sodium silicate and bentonite	119893
Zhang, Junjie / Liu, Bo / Zhao, Shizhen / Shen, Hanlin / Liu, Jun / Zhang, Shengen	Preparation and characterization of glass ceramic foams based on municipal solid waste incineration ashes using secondary aluminum ash as foaming agent	120781
Wan, Zhenmin / Zheng, Binguo / Xie, Xiangbing / Yang, Jingjing / Zhou, Hui / Shilong Wan, Robin / Wang, Jiakang / Wang, Jingjing / Luo, Wenfeng / Xue, Ru / Li, Guanghui / He, Tingshu	Preparation method and performance test of Evotherm pre-wet treatment aluminum hydroxide type warm-mixed flame-retardant asphalt	120618
Zhang, Xuefei / Zhang, Kun / Wu, Chaofan / Liu, Kefei / Jiang, Kang	Preparation of bio-oil and its application in asphalt modification and rejuvenation: A review of the properties, practical application and life cycle assessment	120528
Li, Wanju / Liu, Minghui / Zhai, Hongbo / Wang, Hankun / Yu, Yan	Preparing highly durable bamboo materials via bulk furfurylation	120726
Ahadzadeh Ghanad, D. / Soliman, A. / Godbout, S. / Palacios, J.	Properties of bio-based controlled low strength materials	120742
Nahi, Samir / Leklou, Nordine / Khelidj, Abdelhafid / Oudjit, Mohamed N. / Zenati, Abdelfatah	Properties of cement pastes and mortars containing recycled green glass powder	120875
Zhang, Qiyong / Chen, Wenwu / Fan, Wenjun	Protecting earthen sites by soil hydrophobicity under freeze–thaw and dry–wet cycles	120089
Peng, Lei / Chen, Bing / Zhao, Yixin	Quantitative characterization and comparsion of bentonite microstructure by small angle X-ray scattering and nitrogen adsorption	120863
Zhang, Hanxiao / Wang, Zhenjun / Wang, Qiong	Quantitative evaluation of cement emulsified asphalt mortar and aggregate adhesion performance with dynamic mechanical analysis	120043
Ahmed, Humera / Tiznobaik, Mohammed / Huda, Sumaiya B. / Islam, M. Shahidul / Shahria Alam, M.	Recycled aggregate concrete from large-scale production to sustainable field application	119979
Yang, Shuqing / Lu, Jian-xin / Poon, Chi Sun	Recycling of waste glass in dry-mixed concrete blocks: Evaluation of alkali-silica reaction (ASR) by accelerated laboratory tests and long-term field monitoring	120865
Zhang, Shaodi / Chen, Zhuoran / Ding, Mengyi / Yang, Tiantian / Wang, Mingzhi	Reducing the fire toxicity of wood composites using hierarchically porous 4A (H4A) zeolite modified ammonium polyphosphate (APP) synthesized by a facile in-situ method	120754
Wu, Nan / Fu, Jiyang	Research on the impact response and chaos characteristics in the dynamic damage evolution process of concrete material	120921
Fedrigo, William / Núñez, Washington Peres / Visser, Alex T.	A review of full-depth reclamation of pavements with Portland cement: Brazil and abroad	120540
Ma, Guowei / Sun, Junbo / Aslani, Farhad / Huang, Yimiao / Jiao, Fengyu	Review on electromagnetic wave absorbing capacity improvement of cementitious material	120907
de Matos, Paulo R. / Jiao, Dengwu / Roberti, Fernanda / Pelisser, Fernando / Gleize, Philippe J. P.	Rheological and hydration behaviour of cement pastes containing porcelain polishing residue and different water-reducing admixtures	120850
Xin, Xue / Yao, Zhanyong / Shi, Jingtao / Liang, Ming / Jiang, Hongguang / Zhang, Jizhe / Zhang, Xiaomeng / Yao, Kai	Rheological properties, microstructure and aging resistance of asphalt modified with CNTs/PE composites	120100
Hoseinpour-Lonbar, Mohammad / Alavi, Mohammad Zia / Palassi, Massoud	Selection of asphalt mix with optimal fracture properties at intermediate temperature using Taguchi method for design of experiment	120601
Zhang, L. V. / Suleiman, A. R. / Nehdi, M. L.	Self-healing in fiber-reinforced alkali-activated slag composites incorporating different additives	120059
Sun, Wei / Wang, Hao	Self-healing of asphalt binder with cohesive failure: Insights from molecular dynamics simulation	120538
Singh, Sumit K. / Pandey, Akanksha / Sohel Islam, Sk. / Ransingchung R. N., G. D. / Ravindranath, Sham S.	Significance of frequency in quantifying the deterioration in the properties of SBS modified binders and rutting performance	120872
de Oliveira Junior, Marcone / de Farias, Márcio Muniz	A simple numerical methodology to simulate creep and recovery tests in HMA	120793
Pérez-Acebo, Heriberto / Gonzalo-Orden, Hernán / Findley, Daniel J. / Rojí, Eduardo	A skid resistance prediction model for an entire road network	120041
Cai, Rong / Hu, Yingshuang / Yu, Miao / Liao, Wenyu / Yang, Lufeng / Kumar, Aditya / Ma, Hongyan	Skin effect of chloride ingress in marine concrete: A review on the convection zone	120566
Chen, Xin / Li, Jiangshan / Xue, Qiang / Huang, Xiao / Liu, Lei / Poon, Chi Sun	Sludge biochar as a green additive in cement-based composites: Mechanical properties and hydration kinetics	120723
Zhang, Zhengwei / Sha, Aimin / Liu, Xiang / Luan, Bo / Gao, Jie / Jiang, Wei / Ma, Feng	State-of-the-art of porous asphalt pavement: Experience and considerations of mixture design	119998
Dave, Shemal V. / Bhogayata, Ankur	The strength oriented mix design for geopolymer concrete using Taguchi method and Indian concrete mix design code	120853
Keipour, Nicka / Valipour, Hamid R. / Bradford, Mark A.	Structural behaviour of steel-timber versus steel-concrete composite joints with flush end plate	120885
Calabrese, Angelo Savio / D'Antino, Tommaso / Colombi, Pierluigi / Poggi, Carlo	Study of the influence of interface normal stresses on the bond behavior of FRCM composites using direct shear and modified beam tests	120029
Espinosa, Laura / Caro, Silvia / Wills, Jaime	Study of the influence of the loading rate on the fracture behaviour of asphalt mixtures and asphalt mortars	120037
Kravchenko, Ekaterina / Liu, Jiankun / Chang, Dan / Rao, Youzhi / Krainiukov, Artem	Study of the thermal field of a mixture of soil and PCM materials with simulation of the warming effect during a phase change	120818
Moreira, Rafael Nascimento / de Souza, Thiago Francisco / Pessôa, José Renato de Castro / da Silva, Everton José / Amado, Franco Dani Rico	Study of the use of crushed sand in cementitious composites with EVA and piassava fibers	120908
Zhu, Chao / Liu, Chao / Bai, Guoliang / Fan, Jincheng	Study on long-term performance and flexural stiffness of recycled aggregate concrete beams	120503
Thakare, Akshay Anil / Siddique, Salman / Sarode, Shrikant N. / Deewan, Roshni / Gupta, Vivek / Gupta, Sanchit / Chaudhary, Sandeep	A study on rheological properties of rubber fiber dosed self-compacting mortar	120745
Liu, Jialiang / Du, Shujian / Xue, Yongzhi	Study on the breaking process and damage characteristics of abrasive water jet impacting concrete based on acoustic emission	120085
Yin, Yajuan / Ren, Qingwen / Shen, Lei	Study on the effect of aggregate distribution on mechanical properties and damage cracks of concrete based on multifractal theory	120086
Wang, Hui / Zhang, Ailian / Zhang, Linchun / Liu, Junzhe / Han, Yan / Shu, Haibin / Wang, Jianmin	Study on the influence of compound rust inhibitor on corrosion of steel bars in chloride concrete by electrical parameters	120763
Ma, Fudong / Deng, Mingke / Fan, Hongkan / Yang, Yong / Sun, Hongzhe	Study on the lap-splice behavior of post-yield deformed steel bars in ultra high performance concrete	120611
Jain, Abhishek / Gupta, Rajesh / Chaudhary, Sandeep	Sustainable development of self-compacting concrete by using granite waste and fly ash	120516
Macera, L. / Gigli, L. / Daniele, V. / Plaisier, J. R. / Arrizza, L. / Taglieri, G.	Synchrotron investigations of the nanolime reactivity on biocalcarenite stone surfaces	120066
Wang, Jinbang / Liu, Mingle / Wang, Yuguang / Zhou, Zonghui / Xu, Dongyu / Du, Peng / Cheng, Xin	Synergistic effects of nano-silica and fly ash on properties of cement-based composites	120737
He, Mingsheng / Wang, Youqun / Yuan, Kang / Sheng, Zhaoliang / Qiu, Jing / Liu, Jie / Wang, Jinsen	Synergistic effects of ultrafine particles and graphene oxide on hydration mechanism and mechanical property of dune sand-incorporated cementitious composites	120817
Salih, Ahmed / Rafiq, Serwan / Mahmood, Wael / AL-Darkazali, Hind / Noaman, Riyadh / Ghafor, Kawan / Qadir, Warzer	Systemic multi-scale approaches to predict the flowability at various temperature and mechanical properties of cement paste modified with nano-calcium carbonate	120777
Zhang, Zhigang / Qin, Fengjiang / Ma, Hui / Xu, Liangjin	Tailoring an impact resistant engineered cementitious composite (ECC) by incorporation of crumb rubber	120116
Wang, Liang / Wang, Jialai / Qian, Xin / Fang, Yi / Chen, Peiyuan / Tuinukuafe, Atolo	Tea stain-inspired treatment for fine recycled concrete aggregates	120027
Brito, Flávia Maria Silva / Bortoletto Júnior, Geraldo / Paes, Juarez Benigno / Belini, Ugo Leandro / Tomazello-Filho, Mário	Technological characterization of particleboards made with sugarcane bagasse and bamboo culm particles	120501
Vilela, Alan Pereira / Eugênio, Tony Matheus Carvalho / de Oliveira, Fernando Fonseca / Mendes, Juliana Farinassi / Ribeiro, André Geraldo Cornélio / Brandão Vaz, Lívia Elisabeth Vasconcellos de S. / Farinassi Mendes, Rafael	Technological properties of soil-cement bricks produced with iron ore mining waste	120883
Tang, Qixiang / Du, Cong / Wang, Xingwei / Yu, Tzuyang	Temperature and crack detection of steel rods using an all-optical photoacoustic ultrasound system	119537
Gong, Ting / Ahmed, Ameer H. / Curosu, Iurie / Mechtcherine, Viktor	Tensile behavior of hybrid fiber reinforced composites made of strain-hardening cement-based composites (SHCC) and carbon textile	120913
Štefan, Radek / Foglar, Marek / Fladr, Josef / Horníková, Kateřina / Holan, Jakub	Thermal, spalling, and mechanical behaviour of various types of cementitious composites exposed to fire: Experimental and numerical analysis	119676
Custódio, Pamella / Lied, Eduardo Borges / da Silva, Alan Victor / Frare, Laércio Mantovani / Bittencourt, Paulo Rodrigo Stival / de Oliveira Basso, Rodrigo Leonardo / de Oliveira Tavares, Fernanda / Ferandin Honório, Jacqueline / Trevisan, Ana Paula	TiO2 coated fiber cement composites: Effect of the load of TiO2 particles on photocatalytic degradation of H2S	120379
Saha, Ouafi / Boulfiza, Moh / Wegner, Leon D.	Tracking the hydration of antifreeze treated cement paste at subfreezing temperatures using the TDR technique	119915
Zhang, Mingtao / Yang, Changhui / Zhang, Zhilu / Zhu, Xiaohong / Huang, Wencong / Zhao, Min / Yang, Kai / Yu, Linwen	Understanding the binding and leaching of Cr(VI) in calcium aluminate cement based solidified/stabilized pastes	120040
Frankovič, Ana / Ducman, Vilma / Dolenec, Sabina / Panizza, Matteo / Tamburini, Sergio / Natali, Marco / Pappa, Maria / Tsoutis, Constantinos / Bernardi, Adriana	Up-scaling and performance assessment of façade panels produced from construction and demolition waste using alkali activation technology	120475
de Matos, Paulo R. / Oliveira, Jade C. P. / Medina, Taísa M. / Magalhães, Diego C. / Gleize, Philippe J. P. / Schankoski, Rudiele A. / Pilar, Ronaldo	Use of air-cooled blast furnace slag as supplementary cementitious material for self-compacting concrete production	120102
Feurgard, I. / Lors, C. / Gagné, R. / Damidot, D.	Use of colloidal thickeners to inject and retain bacterial growth media to repair cracked concrete	119993
Oliveira, Tassiane A. / Pinkoski, Igor M. / Bragança, Mariana O. G. P. / Assmann, André / Oliveira, Isabela C. / Pereira, Eduardo	Use of Raman spectroscopy to characterize the effect of nanomagnetite as an addition to Portland cement paste on mitigating internal sulfate attack	120803
de Alencar Monteiro, Vitor Moreira / de Andrade Silva, Flávio	The use of the Barcelona test as quality control of fiber reinforced shotcrete for underground mining	120719
Kunchariyakun, Kittipong / Sukmak, Patimapon	Utilization of garnet residue in radiation shielding cement mortar	120122
Yingliang, Zhao / Jingping, Qiu / Hui, Liu / Zhengyu, Ma	Utilization of quarry dust for low carbon cementitious materials and the immobilization capacity for mine tailings	120091
Fang, Liang / Chen, Tianqi / Li, Xue / Lu, Chunhua / Xu, Zhongzi	Wide-temperature range damping polyurea-urethane blends with self-healing capability	119991
Cui, Xinzhuang / Zhang, Xiaoning / Wang, Jipeng / Zhang, Jiong / Qi, Hui / Li, Jun	X-ray CT based clogging analyses of pervious concrete pile by vibrating-sinking tube method	120075

Über diese
Datenseite
IssueID
37301
Veröffentlicht am:
12.07.2020
Geändert am:
09.01.2021

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - November 2020

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - November 2020

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.