Construction and Building Materials - Oktober 2020

Erschienen:	Oktober 2020

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Zhao, Kang / Yu, Xiang / Zhu, Shengtang / Yan, Yajing / Zhou, Yun / He, Zhiwei / Song, Yufeng / Huang, Ming	Acoustic emission fractal characteristics and mechanical damage mechanism of cemented paste backfill prepared with tantalum niobium mine tailings	119720
Tong, Zheng / Gao, Jie / Yuan, Dongdong	Advances of deep learning applications in ground-penetrating radar: A survey	120371
Wang, Yunyao / Shui, Zhonghe / Wang, Leichong / Gao, Xu / Huang, Yun / Song, Qiulei / Liu, Kaizhi	Alumina-rich pozzolan modification on Portland-limestone cement concrete: Hydration kinetics, formation of hydrates and long-term performance evolution	119712
Sun, Hongyu / Peng, Lisha / Huang, Songling / Wang, Qing / Wang, Shen / Zhao, Wei	Analytical model and optimal focal position selection for oblique point-focusing shear horizontal guided wave EMAT	120375
Filippou, Christiana A. / Chrysostomou, Christis Z.	Analytical model for textile reinforced mortar under monotonic loading	120178
Zeng, Chaoqun / Zhu, Ji-Hua / Xiong, Cheng / Li, Yanru / Li, Dawang / Walraven, Joost	Analytical model for the prediction of the tensile behaviour of corroded steel bars	120290
Beja, Igor Amorim / Motta, Rosângela / Bernucci, Liedi Bariani	Application of recycled aggregates from construction and demolition waste with Portland cement and hydrated lime as pavement subbase in Brazil	119520
Kim, Hong Gi / Qudoos, Abdul / Jeon, In Kyu / Woo, Byeong Hun / Ryou, Jae Suk	Assessment of PCM/SiC-based composite aggregate in concrete: Energy storage performance	119637
Şimşek, Barış	Bis-hydroxyethyl terephthalate cementitious composites properties: A comparative study including hydrogen bonding mechanism with the dioctyl terephthalate	119691
Shen, Dejian / Wen, Chuyuan / Zhu, Pengfei / Li, Ming / Ojha, Binod / Li, Chengcai	Bond behavior between basalt fiber-reinforced polymer bars and concrete under cyclic loading	119518
Neves, Juliana Moraes / Ramanathan, Sivakumar / Suraneni, Prannoy / Grugel, Richard / Radlińska, Aleksandra	Characterization, mechanical properties, and microstructural development of lunar regolith simulant-portland cement blended mixtures	120315
Frech-Baronet, J. / Sorelli, L. / Chen, Z.	A closer look at the temperature effect on basic creep of cement pastes by microindentation	119455
Savino, V. / Lanzoni, L. / Tarantino, A. M. / Viviani, M.	A cohesive FE model for simulating the cracking/debonding pattern of composite NSC-HPFRC/UHPFRC members	119516
Lee, Hyuk / Vimonsatit, Vanissorn / Huen, Wai Yeong / Mendis, Priyan	Cohesive-strength properties versus porosity of cementitious materials	120376
Rauf, Momina / Khaliq, Wasim / Khushnood, Rao Arsalan / Ahmed, Iftikhar	Comparative performance of different bacteria immobilized in natural fibers for self-healing in concrete	119578
Konečný, Petr / Lehner, Petr / Ghosh, Pratanu / Morávková, Zuzana / Tran, Quang	Comparison of procedures for the evaluation of time dependent concrete diffusion coefficient model	119535
Roopashree, M. S. / Singh, Dharamveer / Showkat, Burhan	A comprehensive study on source dependency of conventional, chemical and rheological properties of asphalt binder	120338
Huang, Le / Yu, Tao / Wang, Zhen-Yu / Zhang, Shi-Shun	Compressive behaviour of slender FRP-confined concrete-encased cross-shaped steel columns	120356
Koutas, Lampros N. / Bournas, Dionysios A.	Confinement of masonry columns with textile-reinforced mortar jackets	120343
Zhang, Lu / Niu, Ditao / Wen, Bo / Peng, Gang / Sun, Zhen	Corrosion behavior of low alloy steel bars containing Cr and Al in coral concrete for ocean construction	119564
Singh, Ambrish / Mohamed, Hazem Samih / Singh, Shivani / Yu, Hua / Lin, Yuanhua	Corrosion inhibition using guar gum grafted 2-acrylamido-2-methylpropanesulfonic acid (GG-AMPS) in tubular steel joints	119728
Mahmoodi, O. / Siad, H. / Lachemi, M. / Dadsetan, S. / Şahmaran, M.	Development of ceramic tile waste geopolymer binders based on pre-targeted chemical ratios and ambient curing	120297
Schmid, Marlene / Plank, Johann	Dispersing performance of different kinds of polycarboxylate (PCE) superplasticizers in cement blended with a calcined clay	119576
Yu, Miao / Xiao, Bo / You, Zhanping / Wu, Guoxiong / Li, Xiaoyan / Ding, Yongjie	Dynamic friction coefficient between tire and compacted asphalt mixtures using tire-pavement dynamic friction analyzer	119492
Ling, Liang / Jiang, Peibin / Wang, Kaiyun / Zhai, Wanming	Dynamic interaction between rail vehicles and vibration-attenuating slab tracks	119545
Shen, Dejian / Wen, Chuyuan / Kang, Jiacheng / Shi, Huafeng / Xu, Zhilan	Early-age stress relaxation and cracking potential of High-strength concrete reinforced with Barchip fiber	119538
Shameem Banu, Shaik. / Karthikeyan, J. / Jayabalan, P.	Effect of agro-waste on strength and durability properties of concrete	120322
Burris, Lisa E. / Juenger, Maria C. G.	Effect of calcination on the reactivity of natural clinoptilolite zeolites used as supplementary cementitious materials	119988
Han, Yajin / Jiang, Jiwang / Ni, Fujian / Dong, Qiao / Zhao, Xuan	Effect of cohesive and adhesive parameters on the moisture resistance of thin friction course (TFC) with varying mix design parameters	119420
Selim, F. A. / Amin, M. S. / Ramadan, M. / Hazem, M. M.	Effect of elevated temperature and cooling regimes on the compressive strength, microstructure and radiation attenuation of fly ash–cement composites modified with miscellaneous nanoparticles	119648
El Khessaimi, Y. / El Hafiane, Y. / Smith, A.	Effect of fineness and citric acid addition on the hydration of ye’elimite	119686
Li, X.-J. / Li, Yinyong / Li, Jin / Shen, Yuxiang / Zhang, Chunhai / Wei, Jincheng	Effect of laboratory long-term oven aging on the stiffness of asphalt mixtures	120252
Shi, Hao / Ma, Hongwen / Tian, Linan / Yang, Jing / Yuan, Jiangyan	Effect of microwave curing on metakaolin-quartz-based geopolymer bricks	120354
Shen, Dejian / Feng, Zhizhuo / Zhu, Pengfei / Tang, Xiaojian / Jiang, Guoqing	Effect of pre-wetted lightweight aggregates on residual stress development and stress relaxation in restrained concrete ring specimens	119151
Sena-Cruz, José / Correia, Luís / Ribeiro, Filipe / Figueira, Diogo / Benzo, Pier Giovanni / Barros, Joaquim / Pereira, Eduardo / Valente, Isabel	The effect of surface treatment and environmental actions on the adhesive connection between GFRP laminate surface and fresh FRC	119594
Hamedi, Gholam Hossein / Ghalandari Shamami, Kiumars / Mazhari Pakenari, Mohammad	Effect of ultra-high-molecular-weight polyethylene on the performance characteristics of hot mix asphalt	119729
Khan, Kaffayatullah / Ullah, Muhammad Fahad / Shahzada, Khan / Amin, Muhammad Nasir / Bibi, Tayyaba / Wahab, Nauman / Aljaafari, Abdullah	Effective use of micro-silica extracted from rice husk ash for the production of high-performance and sustainable cement mortar	119589
Debbarma, Solomon / Ransinchung R.N, G. D. / Dhaka, Manish	Effects of a Portland cement additive rich in SiO2 and Al2O3 in microstructure densification of RAP incorporated RCCP mixes	119626
Saleh, Nooralhuda F. / Keshavarzi, Behrooz / Yousefi Rad, Farhad / Mocelin, Douglas / Elwardany, Michael / Castorena, Cassie / Underwood, B. Shane / Kim, Y. Richard	Effects of aging on asphalt mixture and pavement performance	120309
Dębska, Bernardeta / Lichołai, Lech / Brigolini Silva, Guilherme Jorge	Effects of waste glass as aggregate on the properties of resin composites	119632
Veríssimo-Anacleto, Jorge / Ludovico-Marques, Marco / Neto, Pedro	An Empirical model for compressive strength of the limestone masonry based on number of courses - An experimental study	119508
Zeng, Liqin / Liu, Mingwei / Wu, Linjian / Zhou, Chao / Abi, Erdi	Erosion characteristics of viscoelastic anticorrosive coatings for steel structures under sand flow	120360
Jin, Yong-Hee / Ha, Min-Gyun / Jeon, Seok Hyeon / Jeong, Young-Soo / Ahn, Jin-Hee	Evaluation of corrosion conditions for the steel box members by corrosion monitoring exposure test	120195
Yang, Kai / Li, Rui / Yu, Yi / Pei, Jianzhong / Liu, Tao	Evaluation of interlayer stability in asphalt pavements based on shear fatigue property	119628
Oyebisi, Solomon / Ede, Anthony / Olutoge, Festus / Ogbiye, Samuel	Evaluation of reactivity indexes and durability properties of slag-based geopolymer concrete incorporating corn cob ash	119604
Kildashti, Kamyar / Samali, Bijan / Malik, Adnan	Experimental and numerical studies on the comparison between stay-in-place- and conventionally-formed reinforced concrete columns under concentric loading	119631
Zhao, Kaiyue / Qiao, Yun / Zhang, Peng / Bao, Jiuwen / Tian, Yupeng	Experimental and numerical study on chloride transport in cement mortar during drying process	119655
Liu, Pengfei / Liu, Kai / Zhang, Qian-Bing	Experimental characterisation of mechanical behaviour of concrete-like materials under multiaxial confinement and high strain rate	119638
Ghorbani, Behnam / Arulrajah, Arul / Narsilio, Guillermo / Horpibulsuk, Suksun	Experimental investigation and modelling the deformation properties of demolition wastes subjected to freeze–thaw cycles using ANN and SVR	119688
Wang, Wanying / Wei, Deheng / Gan, Yixiang	An experimental investigation on cemented sand particles using different loading paths: Failure modes and fabric quantifications	119487
Xu, Shifa / Lu, Guoyang / Hong, Bin / Jiang, Xinyan / Peng, Geng / Wang, Dawei / Oeser, Markus	Experimental investigation on the development of pore clogging in novel porous pavement based on polyurethane	120378
Zhou, Jiajia / Pan, Jinlong / Zhang, Lan / Zhao, Jun / Li, Zongjin	Experimental study on mechanical behavior of high-strength high-performance concrete under biaxial loading	119681
Lin, Zhenzhen / Guo, Chengchao / Cao, Dingfeng / Ni, Pengpeng / Wang, Fuming	An experimental study on the cutting failure of polymer grouting	119582
Yang, Juan / Fu, Wei / Hu, Xiongyu / Liu, Chengqing / Yang, Qixin / Ju, J. Woody	Experimental study on the long-term behaviors of spray-applied acrylate waterproofing membrane for tunnels exposed to aggressive ions	119603
Du, Yong / Qi, Hong-hui / Huang, Shan-Shan / Richard Liew, J. Y.	Experimental study on the spalling behaviour of ultra-high strength concrete in fire	120334
Pan, Yuanyuan / Yang, Tao / Shang, Yue / Lin, Mei / Liu, Guoqiang / Xie, Yichang / Zhao, Yongli	Field and laboratory evaluations of maintenance treatments for semi-rigid base asphalt pavement	119726
Liu, Fuqiang / Zheng, Mulian / Ye, Yanshi	Formulation and properties of a newly developed powder geopolymer grouting material	120304
Klathae, Tawich / Tanawuttiphong, Nattaphop / Tangchirapat, Weerachart / Chindaprasirt, Prinya / Sukontasukkul, Piti / Jaturapitakkul, Chai	Heat evolution, strengths, and drying shrinkage of concrete containing high volume ground bagasse ash with different LOIs	119443
Bertolesi, Elisa / Milani, Gabriele / Fagone, Mario / Rotunno, Tommaso / Grande, Ernesto	Heterogeneous FE model for single lap shear tests on FRP reinforced masonry curved pillars with spike anchors	119629
Zhou, S. C. / Demartino, C. / Xiao, Y.	High-strain rate compressive behavior of Douglas fir and glubam	119466
Völker, Tobias / Millar, Steven / Strangfeld, Christoph / Wilsch, Gerd	Identification of type of cement through laser-induced breakdown spectroscopy	120345
Adamu, Muhammad / Rahman, Md. Rezaur / Hamdan, Sinin / Bakri, Muhammad Khusairy Bin / Yusof, Fahmi Asyadi Bin Md	Impact of polyvinyl alcohol/acrylonitrile on bamboo nanocomposite and optimization of mechanical performance by response surface methodology	119693
Janetti, Michele Bianchi / Janssen, Hans	Impact of the drying rate on the moisture retention curve of porous building materials	119451
Garilli, Erika / Autelitano, Federico / Roncella, Riccardo / Giuliani, Felice	The influence of laying patterns on the behaviour of historic stone pavements subjected to horizontal loads	119657
Siang Ng, Ding / Chandra Paul, Suvash / Anggraini, Vivi / Kong, Sih Ying / Qureshi, Tanvir Shams / Rodriguez, Claudia Romero / Liu, Qing-feng / Savija, Branko	Influence of SiO2, TiO2 and Fe2O3 nanoparticles on the properties of fly ash blended cement mortars	119627
Shen, Dejian / Liu, Ci / Jiang, Jinliang / Kang, Jiacheng / Li, Ming	Influence of super absorbent polymers on early-age behavior and tensile creep of internal curing high strength concrete	120068
You, Qinglong / Wei, Binghua / Ma, Jinglian / Sesay, Taiwo / Wan, Haifeng	Interpreting the creep behavior of asphalt mortar at high temperature through experimental and numerical methods	120317
Mirwald, Johannes / Werkovits, Stefan / Camargo, Ingrid / Maschauer, Daniel / Hofko, Bernhard / Grothe, Hinrich	Investigating bitumen long-term-ageing in the laboratory by spectroscopic analysis of the SARA fractions	119577
Wang, Sudi / Miao, Yinghao / Wang, Linbing	Investigation of the force evolution in aggregate blend compaction process and the effect of elongated and flat particles using DEM	119674
Liu, Shengjie / Zhou, Shengbo / Peng, Aihong	Laboratory evaluation of foamed warm mix binders and mixtures containing reclaimed asphalt pavements	119773
Gu, Yushan / Omikrine Metalssi, Othman / Martin, Renaud-Pierre / Fen-chong, Teddy / Dangla, Patrick	Locating ettringite due to DEF at the pore scale of cement paste by heat-based dissolution tests	120000
Dahal, Puskar Kumar / Tazarv, Mostafa	Mechanical bar splices for incorporation in plastic hinge regions of RC members	120308
Yang, Ruyuan / Li, Haitao / Lorenzo, Rodolfo / Ashraf, Mahmud / Sun, Youfu / Yuan, Quan	Mechanical behaviour of steel timber composite shear connections	119605
Peng, Shuang / Sbartaï, Zoubir Mehdi / Parent, Thomas	Mechanical damage evaluation of masonry under tensile loading by acoustic emission technique	120336
Chen, Tung-Tsan / Wang, Wei-Chien / Wang, Her-Yung	Mechanical properties and ultrasonic velocity of lightweight aggregate concrete containing mineral powder materials	119550
Bazli, Milad / Zhao, Xiao-Ling / Jafari, Armin / Ashrafi, Hamed / Bai, Yu / Singh Raman, R. K. / Khezrzadeh, Hamed	Mechanical properties of pultruded GFRP profiles under seawater sea sand concrete environment coupled with UV radiation and moisture	120369
Xu, Jie / Wang, Weixin / Han, Qinghua	Mechanical properties of pultruded high-temperature-resistant carbon-fiber-reinforced polymer tendons at elevated temperatures	119526
Yu, Shuo / Jin, Hao	Modeling of the corrosion-induced crack in concrete contained transverse crack subject to chloride ion penetration	119645
Zhang, Chuan / Panda, Guru Prasad / Yan, Qixiang / Zhang, Weilie / Vipulanandan, Cumaraswamy / Song, Gangbing	Monitoring early-age hydration and setting of portland cement paste by piezoelectric transducers via electromechanical impedance method	120348
van der Putten, J. / Azima, M. / van den Heede, P. / Van Mullem, T. / Snoeck, D. / Carminati, C. / Hovind, J. / Trtik, P. / De Schutter, G. / Van Tittelboom, K.	Neutron radiography to study the water ingress via the interlayer of 3D printed cementitious materials for continuous layering	119587
Cheng, Xuanhao / Zou, Zuyin / Zhu, Zhanyuan / Zhai, Shuainan / Yuan, Shucheng / Mo, You / Chen, Wei / He, Junlin	A new construction technology suitable for frame partitioned infill walls with sliding nodes and large openings: Test results	119644
Maleki, Mirshad / Rasoolan, Iraj / Khajehdezfuly, Amin / Jivkov, Andrey P.	On the effect of ITZ thickness in meso-scale models of concrete	119639
Dias, Patrick Pereira / Waldmann, Danièle	Optimisation of the mechanical properties of Miscanthus lightweight concrete	119643
Silva, Guido / Kim, Suyeon / Bertolotti, Bruno / Nakamatsu, Javier / Aguilar, Rafael	Optimization of a reinforced geopolymer composite using natural fibers and construction wastes	119697
Sono, Taro / Tanikura, Izumi / Sainoki, Atsushi / Schwartzkopff, Adam Karl / Obara, Yuzo	Optimization of chipping parameters to mitigate the damage in a concrete substrate using a discontinuum modelling approach	119658
Dong, Zhiming / Wang, Jiajun / Cui, Bo / Wang, Dong / Wang, Xiaoling	Patch-based weakly supervised semantic segmentation network for crack detection	120291
Darvish, Pouya / Alengaram, U. Johnson / Poh, Yap Soon / Ibrahim, Shaliza / Yusoff, Sumiani	Performance evaluation of palm oil clinker sand as replacement for conventional sand in geopolymer mortar	120352
Herath, Charith / Gunasekara, Chamila / Law, David W. / Setunge, Sujeeva	Performance of high volume fly ash concrete incorporating additives: A systematic literature review	120606
Romano, Abbie / Grammatikos, Sotirios / Riley, Mike / Brás, Ana	Physicochemical characterisation of bio-based insulation to explain their hygrothermal behaviour	120163
Ji, Zehua / Li, Meng / Su, Liya / Pei, Yuansheng	Porosity, mechanical strength and structure of waste-based geopolymer foams by different stabilizing agents	119555
Terzić, Anja / Radulović, Dragan / Pezo, Milada / Stojanović, Jovica / Pezo, Lato / Radojevic, Zagorka / Andrić, Ljubiša	Prediction model based on artificial neural network for pyrophyllite mechano-chemical activation as an integral step in production of cement binders	119721
Cha, Sang-Lyul / Jin, Seung-Seop	Prediction of thermal stresses in mass concrete structures with experimental and analytical results	120367
Hua, Jianmin / Huang, Lepeng / Luo, Qiming / Chen, Zengshun / Xu, Yemeng / Zhou, Fengbin	Prediction on the shrinkage of concrete under the restraints of steel plates and studs based on the capillary tension theory	119499
Xia, Huiyun / Zhao, Xu / Wu, Yongchang / Yuan, Teng / Song, Lifang / Yan, Minjie / Wang, Fengyan / Chen, Huaxin	Preparation and performance of antifreeze adhesive materials for asphalt pavement	119554
He, Rui / Tan, Yawen / Chen, Huaxin / Wang, Zhenjun / Zhang, Jiansong / Fang, Jianhong	Preparation and properties of novel superabsorbent polymer (SAP) composites for cementitious materials based on modified metakaolin	119575
Zahedi, Mona / Jafari, Khashayar / Rajabipour, Farshad	Properties and durability of concrete containing fluidized bed combustion (FBC) fly ash	119663
Gonzalez-Torre, Irene / Norambuena-Contreras, José	Recent advances on self-healing of bituminous materials by the action of encapsulated rejuvenators	119568
Mohammadi, Afshin / Ghiasvand, Ebrahim / Nili, Mahmoud	Relation between mechanical properties of concrete and alkali-silica reaction (ASR); a review	119567
Zheng, Di / Song, Weidong / Fu, Jianxin / Xue, Gaili / Li, Jiajian / Cao, Shuai	Research on mechanical characteristics, fractal dimension and internal structure of fiber reinforced concrete under uniaxial compression	120351
Lv, Xingdong / Dong, Yun / Wang, Rongkai / Lu, Chao / Wang, Xiaobo	Resistance improvement of cement mortar containing silica fume to external sulfate attacks at normal temperature	119630
Wen, Yong / Liu, Qi / Chen, Liu / Pei, Jianzhong / Zhang, Jiupeng / Li, Rui	Review and comparison of methods to assess the storage stability of terminal blend rubberized asphalt binders	119586
Guo, Meng / Liang, Meichen / Jiao, Yubo / Zhao, Wei / Duan, Yongxia / Liu, Haiqing	A review of phase change materials in asphalt binder and asphalt mixture	119565
Adebayo Mujedu, Kasali / Ab-Kadir, Mariyana Aida / Ismail, Mohammad	A review on self-compacting concrete incorporating palm oil fuel ash as a cement replacement	119541
Li, Long / Lu, Jian-xin / Zhang, Binyu / Poon, Chi-Sun	Rheology behavior of one-part alkali activated slag/glass powder (AASG) pastes	120381
Ma, Jianmin / Sun, Guoqiang / Sun, Daquan / Zhang, Yi / Cannone Falchetto, Augusto / Lu, Tong / Hu, Mingjun / Yuan, Ying	Rubber asphalt modified with waste cooking oil residue: Optimized preparation, rheological property, storage stability and aging characteristic	120372
Luan, Haoxiang / Wu, Jin / Pan, Jiayu	Saline water absorption behavior and critical saturation degree of recycled aggregate concrete during freeze-thaw cycles	119640
Ortiz-Ripoll, Jorge / Miró, Rodrigo / Martìnez, Adriana H.	Semi-empirical method for the calculation of shear stress, stiffness and maximum shear strength of bituminous interfaces under in-service conditions	120374
Liu, Yue / Tafsirojjaman, T. / Dogar, Attiq Ur Rahman / Hückler, Alexander	Shrinkage behavior enhancement of infra-lightweight concrete through FRP grid reinforcement and development of their shrinkage prediction models	119649
Ruan, Shaoqin / Liang, Shuang / Kastiukas, Gediminas / Zhu, Weiping / Zhou, Xiangming	Solidification of waste excavation clay using reactive magnesia, quicklime, sodium carbonate and early-age oven curing	120333
Khan, Ehsan Ullah / Khushnood, Rao Arsalan / Baloch, Waqas Latif	Spalling sensitivity and mechanical response of an ecofriendly sawdust high strength concrete at elevated temperatures	119656
Zhao, Jiuye / Xu, Jiahui / Cui, Chunyi / Yu, Chunyang / Chang, Jun / Hu, Zhiqi / Bi, Wanli	Stability and phase transition of 5·1·7 phase in alkaline solutions	119683
Soo Park, Ki / Shoukat, Touqeer / Yoo, Pyeong Jun / Lee, Soo Hyung	Strengthening of hybrid glass fiber reinforced recycled hot-mix asphalt mixtures	118947
Aygün, Haydar / McCann, Finian	Structural and acoustical performance of recycled glass bead panels	119581
Huang, Daguan / Niu, Ditao / Zheng, Hao / Su, Li / Luo, Daming / Fu, Qiang	Study on chloride transport performance of eco-friendly coral aggregate concrete in marine environment	120272
Pei, Chun / Zhou, Xiaoye / Zhu, Ji-Hua / Su, Meini / Wang, Yongchang / Xing, Feng	Synergistic effects of a novel method of preparing graphene/polyvinyl alcohol to modify cementitious material	119647
Yadav, Ankur Laxman / Sairam, V. / Srinivasan, K. / Muruganandam, L.	Synthesis and characterization of geopolymer from metakaolin and sugarcane bagasse ash	119231
Valeri, Patrick / Ruiz, Miguel Fernández / Muttoni, Aurelio	Tensile response of textile reinforced concrete	119517
Gurusideswar, S. / Shukla, Abhilash / Jonnalagadda, Krishna N. / Nanthagopalan, Prakash	Tensile strength and failure of ultra-high performance concrete (UHPC) composition over a wide range of strain rates	119642
Jamshidi, F. / Dehestani, M.	Time to cracking in concrete cover length due to reinforcement corrosion via a simplified fracture mechanics approach	119588
Su, Wufeng / Han, Xiaocheng / Gong, Jie / Xi, Zhonghua / Zhang, Junsheng / Wang, Qingjun / Xie, Hongfeng	Toughening epoxy asphalt binder using core-shell rubber nanoparticles	119716
Gilbert, Benoit P. / Dias-da-Costa, Daniel / Lebée, Arthur / Foret, Gilles	Veneer-based timber circular hollow section beams: Behaviour, modelling and design	120380

Über diese
Datenseite
IssueID
36834
Veröffentlicht am:
02.06.2020
Geändert am:
09.01.2021

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - Oktober 2020

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - Oktober 2020

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.