Construction and Building Materials - Juli 2020

Erschienen:	Juli 2020

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Wang, Fang / Kong, Xiangming / Jiang, Lingfei / Wang, Dongmin	The acceleration mechanism of nano-C-S-H particles on OPC hydration	118734
Mehrinejad Khotbehsara, Mojdeh / Manalo, Allan / Aravinthan, Thiru / Ferdous, Wahid / Nguyen, Kate T. Q. / Hota, Gangarao	Ageing of particulate-filled epoxy resin under hygrothermal conditions	118846
Zhao, Zhiguang / Qu, Xiaoling / Li, Jinhe	Application of polymer modified cementitious coatings (PCCs) for impermeability enhancement of concrete	118769
Obmiński, Andrzej	Asbestos in building and its destruction	118685
Zamani, Mohammadhossein / Nikafshar, Saeid / Mousa, Ahmad / Behnia, Arash	Bacteria encapsulation using synthesized polyurea for self-healing of cement paste	118556
Huang, Yongbo / Pei, Yan / Qian, Jueshi / Gao, Xin / Liang, Jiao / Duan, Guangbin / Zhao, Piqi / Lu, Lingchao / Cheng, Xin	Bauxite free iron rich calcium sulfoaluminate cement: Preparation, hydration and properties	118774
Zhou, Tao / Cao, Liping / Fini, Elham H. / Li, Lingwen / Liu, Zhiyang / Dong, Zejiao	Behaviors of asphalt under certain aging levels and effects of rejuvenation	118748
Terzi, Serdal / Saltan, Mehmet / Armagan, Kemal / Kurtman, Akay Kurter / Karahancer, Sebnem / Eriskin, Ekinhan / Uz, Volkan Emre	Bitumen expanding using bio-oil product of rose pulp’s pyrolysis process	118721
Yan, Baoxu / Zhu, Wancheng / Hou, Chen / Yilmaz, Erol / Saadat, Mahdi	Characterization of early age behavior of cemented paste backfill through the magnitude and frequency spectrum of ultrasonic P-wave	118733
Apostolidis, Panos / Liu, Xueyan / Erkens, Sandra / Scarpas, Athanasios	Characterization of epoxy-asphalt binders by differential scanning calorimetry	118800
Yaras, Ali	Combined effects of paper mill sludge and carbonation sludge on characteristics of fired clay bricks	118722
Bahtiar, Effendi Tri / Trujillo, David / Nugroho, Naresworo	Compression resistance of short members as the basis for structural grading of Guadua angustifolia	118759
Kang, Sung-Hoon / Kwon, Yang-Hee / Moon, Juhyuk	Controlling the hydration and carbonation in lime-based materials: Advantage of slow carbonation in CO2 curable construction materials	118749
Zeng, Yu / Zhang, Da-wei / Dai, Jian-Guo / Fang, Ming-shan / Jin, Wei-liang	Determining the service life extension of silane treated concrete structures: A probabilistic approach	118802
Dinh, Ngoc Hieu / Tran, Hai Van / Choi, Kyoung-Kyu	Direct shear behavior of cementitious mortar reinforced by carbon fiber textile	118760
Centelles, Xavier / Castro, J. Ramon / Cabeza, Luisa F.	Double-lap shear test on laminated glass specimens under diverse ageing conditions	118784
Assaad, Joseph J. / El Mir, Abdulkader	Durability of polymer-modified lightweight flowable concrete made using expanded polystyrene	118764
Kseniia, Rudenko / Zhou, Wei	Dynamic compressive response of high-performance fiber-reinforced cement composites	118738
Fang, Shuai / Lam, Eddie Siu Shu / Li, Bo / Wu, Bo	Effect of alkali contents, moduli and curing time on engineering properties of alkali activated slag	118799
Shen, Dejian / Feng, Zhizhuo / Kang, Jiacheng / Wen, Chuyuan / Shi, Huafeng	Effect of Barchip fiber on stress relaxation and cracking potential of concrete internally cured with super absorbent polymers	118392
Seo, Joonho / Park, Solmoi / Yoon, H. N. / Lee, H. K.	Effect of CaO incorporation on the microstructure and autogenous shrinkage of ternary blend Portland cement-slag-silica fume	118691
Khaneghahi, Mohammad Houshmand / Najafabadi, Esmaeil Pournamazian / Bazli, Milad / Oskouei, Asghar Vatani / Zhao, Xiao-Ling	The effect of elevated temperatures on the compressive section capacity of pultruded GFRP profiles	118725
Chen, Lijie / Su, Ray Kai Leung	Effect of high rebar temperature during casting on corrosion in carbonated concrete	118718
Kumar, Yogesh / Singh, Sumit K. / Oberoi, Deepa / Kumar, Praveen / Mohanty, Paritosh / Ravindranath, Sham S.	Effect of molecular structure and concentration of styrene-butadiene polymer on upper service temperature rheological properties of modified binders	118790
Zhang, Ai / Yang, Wencui / Ge, Yong / Liu, Penghuan	Effect of nanomaterials on the mechanical properties and microstructure of cement mortar under low air pressure curing	118787
Obmiński, Andrzej / Janeczek, Janusz	The effectiveness of asbestos stabilizers during abrasion of asbestos-cement sheets	118767
Tolentino Souza, Alessandra / Caldas, Rodrigo Barreto / Ludvig, Peter / dos Santos, White Jose	The effects of mixture’s components on the mechanical properties and durability indicators of mixed mortar using simplex network method	118740
Hu, Jiyue / Li, Shan / Lu, Yiyan / Zhang, Hongyuan / Zhang, Mingzhong	Efficiency of electrochemical extraction of chlorides in fly ash concrete using carbon fibre mesh anode	118717
D'Altri, Antonio Maria / de Miranda, Stefano	Environmentally-induced loss of performance in FRP strengthening systems bonded to full-scale masonry structures	118757
Jones, Casey / Goad, Daniel / Hale, W. Micah	Examining soaking duration of coarse clay and shale lightweight aggregates for internal curing in conventional concrete	118754
Li, Jingpei / Xie, Feng / Zhao, Gaowen / Li, Lin	Experimental and numerical investigation of cast-in-situ concrete under external sulfate attack and drying-wetting cycles	118789
Hamrat, Mostefa / Bouziadi, Farid / Boulekbache, Bensaid / Daouadji, Tahar Hassaine / Chergui, Selma / Labed, Abderahim / Amziane, Sofiane	Experimental and numerical investigation on the deflection behavior of pre-cracked and repaired reinforced concrete beams with fiber-reinforced polymer	118745
Wang, Haopeng / Liu, Xueyan / Erkens, Sandra / Skarpas, Athanasios	Experimental characterization of storage stability of crumb rubber modified bitumen with warm-mix additives	118840
Farooq, Muhammad Aboubakar / Sato, Yasuhiko / Niitani, Kyoji	Experimental investigation of monotonic behavior and stress-strain models of AE and non-AE high strength concrete with BFS fine aggregates under freezing and thawing	118679
Rashid, Khuram / Ahmad, Madiha / Ueda, Tamon / Deng, Jun / Aslam, Kiran / Nazir, Imran / Azam Sarwar, Muhammad	Experimental investigation of the bond strength between new to old concrete using different adhesive layers	118798
Li, Sheng / Yin, Jian / Zhang, Gui	Experimental investigation on optimization of vegetation performance of porous sea sand concrete mixtures by pH adjustment	118775
Zhang, Xiubiao / Jiang, Zehui / Fei, Benhua / Fang, Changhua / Liu, Huanrong	Experimental performance of threaded steel glued into laminated bamboo	118780
Liu, Fang / You, Zhanping / Diab, Aboelkasim / Liu, Zhuangzhuang / Zhang, Chao / Guo, Shuaicheng	External sulfate attack on concrete under combined effects of flexural fatigue loading and drying-wetting cycles	118224
Dev, Amal / Chellapandian, M. / Prakash, S. Suriya / Kawasaki, Yuma	Failure-mode analysis of macro-synthetic and hybrid fibre-reinforced concrete beams with GFRP bars using acoustic emission technique	118737
Melese, Eskedil / Baaj, Hassan / Tighe, Susan	Fatigue behaviour of reclaimed pavement materials treated with cementitious binders	118565
Hadi, Muhammad N. S. / Al-Hedad, Abbas S. A.	Flexural fatigue behaviour of geogrid reinforced concrete pavements	118762
Chen, Feixu / Zhang, Yihe / Liu, Jingang / Wang, Xinke / Chu, Paul K. / Chu, Bohua / Zhang, Na	Fly ash based lightweight wall materials incorporating expanded perlite/SiO2 aerogel composite: Towards low thermal conductivity	118728
Matalkah, Faris / Soroushian, Parviz	Graphene nanoplatelet for enhancement the mechanical properties and durability characteristics of alkali activated binder	118773
Park, Solmoi / Park, Hyeong Min / Yoon, H. N. / Seo, Joonho / Yang, Cheol-Min / Provis, John L. / Yang, Beomjoo	Hydration kinetics and products of MgO-activated blast furnace slag	118700
Vanama, Raghava Kumar / Ramakrishnan, Balaji	Improved degradation relations for the tensile properties of naturally and artificially corroded steel rebars	118706
Savary, Mehdi / Mehdizadeh Saradj, Fatemeh / Shaygan Manesh, Mahdi / Tahmasebiboldaji, Nahid / Kazemi, Asieh Sadat	Improving the adobe material properties by laser material processing	118591
Aparicio, S. / Hernández, M. G. / Anaya, J. J.	Influence of environmental conditions on concrete manufactured with recycled and steel slag aggregates at early ages and long term	118739
Guo, Menghuan / Zhong, Qianli / Zhou, Yingwu / Hu, Biao / Huang, Zhenyu / Yue, Yanchao	Influence of flexural loading and chloride exposure on the fatigue behavior of high-performance lightweight engineered cementitious composites	118512
Tran, Quang / Ghosh, Pratanu	Influence of pumice on mechanical properties and durability of high performance concrete	118741
Qi, Zhanfeng / Chen, Wenhua / Zhang, Lei / Huang, Zhiyi	An integrated design method for functional cementitious composites (FCC)	118698
Torelli, Giacomo / Lees, Janet M.	Interface bond strength of lightweight low-cement functionally layered concrete elements	118614
Zahra, Tatheer / Jelvehpour, Ali / Thamboo, Julian A. / Dhanasekar, Manicka	Interfacial transition zone modelling for characterisation of masonry under biaxial stresses	118735
Li, Peiran / Li, Wengui / Yu, Tao / Qu, Fulin / Tam, Vivian W. Y.	Investigation on early-age hydration, mechanical properties and microstructure of seawater sea sand cement mortar	118776
Tan, Ji-Shuang / Shen, Shui-Long / Zhou, Annan / Wang, Ze-Nian / Lyu, Hai-Min	Laboratory evaluation of long-term sealing behaviors of two water-swelling materials for shield tunnel gasket	118711
Liu, Bing / Guo, Jianhua / Zhou, Jingkai / Wen, Xiaoyan / Deng, Zhiheng / Wang, Huailiang / Zhang, Xuanyu	The mechanical properties and microstructure of carbon fibers reinforced coral concrete	118771
Zhang, Junfei / Huang, Yimiao / Ma, Guowei / Sun, Junbo / Nener, Brett	A metaheuristic-optimized multi-output model for predicting multiple properties of pervious concrete	118803
Bibi, Tayyaba / Ali, Amir / Zhang, Jianhua / Naseer, Amjid / Islam, Shams Ul	Microscopic analysis of the deleterious effects of ammonium nitrate fertilizer on concrete	118716
Liu, Donghai / Xia, Xietian / Sun, Longfei	Movement and embedding characteristics of interlayer aggregates during roller-compacted concrete compaction process using discrete element simulation	118765
Varona, F. B. / Baeza, F. J. / Bru, D. / Ivorra, S.	Non-linear multivariable model for predicting the steel to concrete bond after high temperature exposure	118713
Shao, Wei / Nie, Yinghui / Liang, Fayun / Shi, Danda	A novel comprehensive evaluation method for the corrosion initiation life of RC hollow piles in chloride environments	118801
Sun, Xiaofeng / He, Minjuan / Li, Zheng	Novel engineered wood and bamboo composites for structural applications: State-of-art of manufacturing technology and mechanical performance evaluation	118751
Pérez, Ignacio / Medina, Luis / Gómez-Meijide, Breixo / Alves Costa, Pedro / Silva Cardoso, António	Numerical simulation of bitumen emulsion-stabilised base course mixtures with C&D waste aggregates considering nonlinear elastic behaviour	118696
Sun, Pan-Pan / Yang, Xu-Xu / Qiao, Wei-Guo / Song, Wei-Jie / Wu, Yue / Sun, De-Kang	Optimally designed shotcrete material and its cooperating performance when integrated with sandstone	118742
Jiménez del Barco Carrión, Ana / Subhy, Ayad / Izquierdo Rodriguez, Maria Angeles / Lo Presti, Davide	Optimisation of liquid rubber modified bitumen for road pavements and roofing applications	118630
Elemam, Walid E. / Abdelraheem, Ahmed H. / Mahdy, Mohamed G. / Tahwia, Ahmed M.	Optimizing fresh properties and compressive strength of self-consolidating concrete	118781
Liu, Jun / Yan, Kezhen / Liu, Wenyao / Zhao, Xiaowen	Partially replacing Styrene-Butadiene-Styrene (SBS) with other asphalt binder modifier: Feasibility study	118752
Han, Sen / Yao, Tengfei / Han, Xiao / Hongwei, Zhang / Yang, Xiaofei	Performance evaluation of waterborne epoxy resin modified hydrophobic emulsified asphalt micro-surfacing mixture	118835
Li, Xinjian / Zhang, Na / Yuan, Jianbo / Wang, Xinke / Zhang, Yonghong / Chen, Feixu / Zhang, Yihe	Preparation and microstructural characterization of a novel 3D printable building material composed of copper tailings and iron tailings	118779
Li, Xuelian / Ye, Junhong / Badjona, Yawavi / Chen, Yuliang / Luo, Sang / Song, Xiaojin / Zhang, Hongri / Yao, Huan / Yang, Le / You, Lingyun / Wang, Chaohui / You, Zhanping	Preparation and performance of colored Ultra-Thin overlay for preventive maintenance	118619
Tavakoli, Davoud / Sakenian Dehkordi, Rahbar / Divandari, Hassan / de Brito, Jorge	Properties of roller-compacted concrete pavement containing waste aggregates and nano SiO2	118747
Zhang, Pengpeng / Muhammad, Faheem / Yu, Lin / Xia, Ming / Lin, Huirong / Huang, Xiao / Jiao, Binquan / Shiau, YanChyuan / Li, Dongwei	Self-cementation solidification of heavy metals in lead-zinc smelting slag through alkali-activated materials	118756
Santana, Henrique A. / Andrade Neto, José S. / Amorim Júnior, Nilson S. / Ribeiro, Daniel V. / Cilla, Marcelo S. / Dias, Cléber M. R.	Self-compacting geopolymer mixture: Dosing based on statistical mixture design and simultaneous optimization	118677
Ottosen, Lisbeth M. / Bertelsen, Ida M. G. / Jensen, Pernille E. / Kirkelund, Gunvor M.	Sewage sludge ash as resource for phosphorous and material for clay brick manufacturing	118684
Chen, Meng / Li, Zhi-hao / Wu, Jiang-fei / Wang, Jian-Hua	Shear behaviour and diagonal crack checking of shale ceramsite lightweight aggregate concrete beams with high-strength steel bars	118730
Lee, Jong-Sub / Han, WooJin / Kim, Sang Yeob / Byun, Yong-Hoon	Shear strength and interface friction characteristics of expandable foam grout	118719
Lepakshi, R. / Venkatarama Reddy, B. V.	Shear strength parameters and Mohr-Coulomb failure envelopes for cement stabilised rammed earth	118708
Yaghoubi, Ehsan / Arulrajah, Arul / Yaghoubi, Mohammadjavad / Horpibulsuk, Suksun	Shear strength properties and stress–strain behavior of waste foundry sand	118761
Wu, Shengxing / Wang, Xin / Shen, Dejian / Sun, Kewei / Zhu, Jie	Simulation analysis on hydration kinetics and microstructure development of tricalcium silicate considering dissolution mechanisms	118535
Ruan, Xin / Li, Yue / Zhou, Xiaoyi / Jin, Zeren / Yin, Zhiyi	Simulation method of concrete chloride ingress with mesoscopic cellular automata	118778
Salih, Wdah T. / Yu, Wang / Dong, Xiaoqiang / Hao, Wen	Study on stress-strain-resistivity and microscopic mechanism of red mud waste modified by desulphurization gypsum-fly ash under drying-wetting cycles	118772
Zhang, Ai / Yang, Wencui / Ge, Yong / Wang, Yaozeng / Liu, Penghuan	Study on the hydration and moisture transport of white cement containing nanomaterials by using low field nuclear magnetic resonance	118788
Ji, Xiaoping / Sun, Enyong / Zou, Haiwei / Hou, Yueqin / Chen, Bo	Study on the multiscale adhesive properties between asphalt and aggregate	118693
Xiao, Yue / Yan, Boxiang / Zhang, Xiaoshan / Chang, Xiwen / Li, Mingliang	Study the diffusion characteristics of rejuvenator oil in aged asphalt binder by image thresholding and GC–MS tracer analysis	118782
Zeng, Xiang / Wang, Zhan / Huo, Jingsi	Tensile behavior of 400 MPa-grade anti-earthquake hot-rolled ribbed bar (HRB400E) over a wide strain rate range	118729
Mohseni, Ehsan / Tang, Waiching / Khayat, Kamal H. / Cui, Hongzhi	Thermal performance and corrosion resistance of structural-functional concrete made with inorganic PCM	118768
Pereira, Clara / Silva, Ana / de Brito, Jorge / Silvestre, José D.	Urgency of repair of building elements: Prediction and influencing factors in façade renders	118743
Saha, Sanat Kumar / Pradhan, Subhasis / Barai, Sudhirkumar V.	Use of machine learning based technique to X-ray microtomographic images of concrete for phase segmentation at meso-scale	118744
Zhang, Junjie / Tan, Hongbo / He, Xingyang / Yang, Wei / Deng, Xiufeng	Utilization of carbide slag-granulated blast furnace slag system by wet grinding as low carbon cementitious materials	118763
Ren, Darui / Liu, Baoguo / Chen, Shaojie / Yin, Dawei / Yu, Mingyuan / Liu, Hao / Wu, Lei	Visualization of acoustic emission monitoring of fracture process zone evolution of mortar and concrete beams under three-point bending	118712
Zhu, He / Li, Qingbin / Ma, Rui / Yang, Lin / Hu, Yu / Zhang, Jinliang	Water-repellent additive that increases concrete cracking resistance in dry curing environments	118704

Über diese
Datenseite
IssueID
36560
Veröffentlicht am:
31.03.2020
Geändert am:
09.01.2021

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - Juli 2020

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - Juli 2020

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.