Construction and Building Materials - März 2018

Erschienen:	März 2018

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Elkarmoty, Mohamed / Tinti, Francesco / Kasmaeeyazdi, Sara / Bonduà, Stefano / Bruno, Roberto	3D modeling of discontinuities using GPR in a commercial size ornamental limestone block	81-86
Barman, Manik / Ghabchi, Rouzbeh / Singh, Dharamveer / Zaman, Musharraf / Commuri, Sesh	An alternative analysis of indirect tensile test results for evaluating fatigue characteristics of asphalt mixes	204-213
Wang, Xiao-Yong	Analysis of hydration and strength optimization of cement-fly ash-limestone ternary blended concrete	130-140
Ho, Lanh Si / Nakarai, Kenichiro / Duc, Myriam / Le Kouby, Alain / Maachi, Abdelhak / Sasaki, Takashi	Analysis of strength development in cement-treated soils under different curing conditions through microstructural and chemical investigations	634-646
Rocha Segundo, I. / Ferreira, C. / Freitas, E. F. / Carneiro, J. O. / Fernandes, F. / Júnior, S. Landi / Costa, M. F.	Assessment of photocatalytic, superhydrophobic and self-cleaning properties on hot mix asphalts coated with TiO2 and/or ZnO aqueous solutions	500-509
Tavakoli, H. R. / Jalali, Pedram / Mahmoudi, Sina	A comparative study of the effect of adding steel fiber on the mechanical behavior of RSCC beams under displacement and force control conditions	315-323
Li, Danda / Zhuge, Yan / Gravina, Rebecca / Mills, Julie E.	Compressive stress strain behavior of crumb rubber concrete (CRC) and application in reinforced CRC slab	745-759
Michael, Jacob / Smith, Scott H. / Durham, Stephan A. / Chorzepa, Mi Geum	Crack control in concrete walls through novel mixture design, full-scale testing, and finite element analysis	301-314
Alyousef, Rayed / Topper, Tim / Al-Mayah, Adil	Crack growth modeling of tension lap spliced reinforced concrete beams strengthened with fibre reinforced polymer wrapping under fatigue loading	345-355
Lokuge, Weena / Wilson, Aaron / Gunasekara, Chamila / Law, David W. / Setunge, Sujeeva	Design of fly ash geopolymer concrete mix proportions using Multivariate Adaptive Regression Spline model	472-481
Sarfarazi, Vahab / Haeri, Hadi / Ebneabbasi, Pouyan / Bagher Shemirani, Alireza / Hedayat, Ahmadreza	Determination of tensile strength of concrete using a novel apparatus	817-832
Mastali, M. / Dalvand, A. / Sattarifard, A. R. / Illikainen, M.	Development of eco-efficient and cost-effective reinforced self-consolidation concretes with hybrid industrial/recycled steel fibers	214-226
Campbell, Sophie / Ding, Haibo / Hesp, Simon A. M.	Double-edge-notched tension testing of asphalt mastics	87-95
Maanser, A. / Benouis, A. / Ferhoune, Noureddine	Effect of high temperature on strength and mass loss of admixtured concretes	916-921
Jeong, Yeonung / Hargis, Craig W. / Chun, Sung-Chul / Moon, Juhyuk	The effect of water and gypsum content on strätlingite formation in calcium sulfoaluminate-belite cement pastes	712-722
Khan, Mehran / Ali, Majid	Effectiveness of hair and wave polypropylene fibers for concrete roads	581-591
Gu, Yue / Ran, Qianping / She, Wei / Shu, Xin / Liu, Jiaping	Effects and mechanisms of surface-treatment of cementitious materials with nanoSiO2@PCE core-shell nanoparticles	12-22
Campos, A. / López, C. M. / Blanco, A. / Aguado, A.	Effects of an internal sulfate attack and an alkali-aggregate reaction in a concrete dam	668-683
Wang, Linhao / Li, Xiangyu / Cheng, Yin / Bai, Xiaohong	Effects of coal-metakaolin on the properties of cemented sandy soil and its mechanisms	592-600
Yoo, Doo-Yeol / Kim, Min-Jae / Kim, Soonho / Ryu, Gum-Sung / Koh, Kyung-Taek	Effects of mix proportion and curing condition on shrinkage behavior of HPFRCCs with silica fume and blast furnace slag	241-256
Pyo, Sukhoon / Tafesse, Million / Kim, Bong-Ju / Kim, Hyeong-Ki	Effects of quartz-based mine tailings on characteristics and leaching behavior of ultra-high performance concrete	110-117
Shin, Hyun-Oh / Yoo, Doo-Yeol / Yoon, Young-Soo	Enhancing the resistance of prestressed concrete sleepers to multiple impacts using steel fibers	356-372
Romero, Louis / Cortes, Douglas D. / Valdes, Julio R.	Experimental assessment of the heal-ability of a polymer bonded sand	610-617
Khan, Musaad Zaheer Nazir / Hao, Yifei / Hao, Hong / Shaikh, Faiz Uddin Ahmed	Experimental evaluation of quasi-static and dynamic compressive properties of ambient-cured high-strength plain and fiber reinforced geopolymer composites	482-499
Ferrer, Miquel / Marimon, Frederic / Casafont, Miquel	An experimental investigation of a new perfect bond technology for composite slabs	618-633
Li, Faping / Liu, JieSheng	An experimental investigation of hydration mechanism of cement with silicane	684-693
Visintin, P. / Mohamad Ali, M. S. / Xie, T. / Sturm, A. B.	Experimental investigation of moment redistribution in ultra-high performance fibre reinforced concrete beams	433-444
Jongvivatsakul, Pitcha / Ramdit, Tripop / Ngo, Tan Phong / Likitlersuang, Suched	Experimental investigation on mechanical properties of geosynthetic cementitious composite mat (GCCM)	956-965
Cai, Zhong-Kui / Wang, Zhenyu / Yang, T. Y.	Experimental testing and modeling of precast segmental bridge columns with hybrid normal- and high-strength steel rebars	945-955
Fan, Jinyang / Jiang, Deyi / Chen, Jie / Liu, Wei / Tiedeu Ngaha, William / Chen, Junchao	Fatigue performance of ordinary concrete under discontinuous cyclic loading	974-981
Mendis, Agampodi S. M. / Al-deen, Safat / Ashraf, Mahmud	Flexural shear behaviour of reinforced Crumbed Rubber Concrete beam	779-791
Huang, Puxi / Chew, Y. M. John / Chang, Wen-Shao / Ansell, Martin P. / Lawrence, Mike / Latif, Eshrar / Shea, Andy / Ormondroyd, Graham / Du, Hu	Heat and moisture transfer behaviour in Phyllostachys edulis (Moso bamboo) based panels	35-49
Ng, Serina / Jelle, Bjørn Petter / Sandberg, Linn Ingunn / Gao, Tao / Alex Mofid, Sohrab	Hollow silica nanospheres as thermal insulation materials for construction: Impact of their morphologies as a function of synthesis pathways and starting materials	72-80
Helson, Olivier / Eslami, Javad / Beaucour, Anne-Lise / Noumowé, Albert / Gotteland, Philippe	Hydro-mechanical behaviour of soilcretes through a parametric laboratory study	657-667
Zhang, Yao / Ma, Tao / Ding, Xuanhao / Chen, Tian / Huang, Xiaoming / Xu, Guangji	Impacts of air-void structures on the rutting tests of asphalt concrete based on discretized emulation	334-344
Huang, Guodong / Ji, Yongsheng / Li, Jun / Hou, Zhihui / Dong, Zuochao	Improving strength of calcinated coal gangue geopolymer mortars via increasing calcium content	760-768
Jang, Hong-seok / Lim, Yong-Taek / Kang, Je-Hong / So, Seung-young / So, Hyoung-seok	Influence of calcination and cooling conditions on pozzolanic reactivity of paper mill sludge	257-270
Brown, Lesa / Sanchez, Florence	Influence of carbon nanofiber clustering in cement pastes exposed to sulfate attack	181-187
Zheng, Haibing / Dai, Jian-Guo / Li, Weihua / Poon, Chi Sun	Influence of chloride ion on depassivation of passive film on galvanized steel bars in concrete pore solution	572-580
Čėsnienė, Jūratė / Baltušnikas, Arūnas / Lukošiūtė, Irena / Brinkienė, Kristina / Kalpokaitė-Dičkuvienė, Regina	Influence of organoclay structural characteristics on properties and hydration of cement pastes	59-71
Li, Haiyan / Guan, Xuemao / Zhang, Xuyang / Ge, Peng / Hu, Xingxing / Zou, Dinghua	Influence of superfine ettringite on the properties of sulphoaluminate cement-based grouting materials	723-731
Caprai, V. / Gauvin, F. / Schollbach, K. / Brouwers, H. J. H.	Influence of the spruce strands hygroscopic behaviour on the performances of wood-cement composites	522-530
Moreno-Juez, J. / Cazacliu, B. / Artoni, R.	Influence of the water and aggregate contents on the concrete mixing evolution	280-289
Bazmara, Behrokh / Tahersima, Mohammad / Behravan, Amir	Influence of thermoplastic polyurethane and synthesized polyurethane additive in performance of asphalt pavements	1-11
Liu, Guohua / Lu, Wenbin / Lou, Yadong / Pan, Wenna / Wang, Zhenyu	Interlayer shear strength of Roller compacted concrete (RCC) with various interlayer treatments	647-656
Li, Linglin / Li, Wenlong / Wang, Hao / Zhao, Jingnan / Wang, Zhongyuan / Dong, Mansheng / Han, Ding	Investigation of Prony series model related asphalt mixture properties under different confining pressures	147-157
Zheng, Y. / Zhang, L. F. / Xia, L. P.	Investigation of the behaviour of flexible and ductile ECC link slab reinforced with FRP	694-711
Dannessa, D. / Sinha-Ray, S. / Jun, S. / Yarin, A. L.	Jets of three-phase power-law fluids and foam jet mixing in gypsum slurry	922-944
Singh, Surender / Ransinchung, G. D. R. N. / Monu, Kumari / Kumar, Praveen	Laboratory investigation of RAP aggregates for dry lean concrete mixes	808-816
da Silva Araujo Filho, Romero Gomes / de Oliveira Freitas, Julio Cesar / de Freitas Melo, Marcus Antônio / Braga, Renata Martins	Lightweight oil well cement slurry modified with vermiculite and colloidal silicon	908-915
Loaiza, Alexandra / Colorado, Henry A.	Marshall stability and flow tests for asphalt concrete containing electric arc furnace dust waste with high ZnO contents from the steel making process	769-778
Almalkawi, Areej T. / Hong, Weisheng / Hamadna, Sameer / Soroushian, Parviz / Darsanasiri, A. G. N. D. / Balchandra, Anagi / Al-Chaar, Ghassan	Mechanical properties of aerated cement slurry-infiltrated chicken mesh	966-973
Ramos, Rui / Silva, Ana / de Brito, Jorge / Gaspar, Pedro Lima	Methodology for the service life prediction of ceramic claddings in pitched roofs	386-399
Kržišnik, Davor / Lesar, Boštjan / Thaler, Nejc / Humar, Miha	Micro and material climate monitoring in wooden buildings in sub-Alpine environments	188-195
Nepomuceno, Miguel C. S. / Pereira-de-Oliveira, L. A. / Pereira, Sandrine F.	Mix design of structural lightweight self-compacting concrete incorporating coarse lightweight expanded clay aggregates	373-385
Dong, Zejiao / Liu, Zhiyang / Wang, Peng / Zhou, Tao	Modeling asphalt mastic modulus considering substrate–mastic interaction and adhesion	324-333
Arends, Thomas / Pel, Leo / Smeulders, David	Moisture penetration in oak during sinusoidal humidity fluctuations studied by NMR	196-203
Thomas, C. / de Brito, J. / Gil, V. / Sainz-Aja, J. A. / Cimentada, A.	Multiple recycled aggregate properties analysed by X-ray microtomography	171-180
Garcia-Gil, Lívia / Miró, Rodrigo / Pérez-Jiménez, Félix E.	New approach to characterize cracking resistance of asphalt binders	50-58
Liu, Jian / Wu, Chengqing / Li, Jun / Su, Yu / Chen, Xiaowei	Numerical investigation of reactive powder concrete reinforced with steel wire mesh against high-velocity projectile penetration	855-872
Zheng, Yongfeng / Guo, Zhengxing / Guan, Dongzhi / Zhang, Xin	Parametric study on a novel grouted rolling pipe splice for precast concrete construction	452-463
Meddah, Mohammed Seddik / Ismail, Mohamed A. / El-Gamal, Sherif / Fitriani, Heni	Performances evaluation of binary concrete designed with silica fume and metakaolin	400-412
Bílek, Vlastimil / Kalina, Lukáš / Novotný, Radoslav	Polyethylene glycol molecular weight as an important parameter affecting drying shrinkage and hydration of alkali-activated slag mortars and pastes	564-571
Elghazy, Mohammed / El Refai, Ahmed / Ebead, Usama / Nanni, Antonio	Post-repair flexural performance of corrosion-damaged beams rehabilitated with fabric-reinforced cementitious matrix (FRCM)	732-744
Erzengin, S. Gamze / Kaya, Kübra / Perçin Özkorucuklu, Sabriye / Özdemir, Velican / Yıldırım, Gizem	The properties of cement systems superplasticized with methacrylic ester-based polycarboxylates	96-109
Dang, Juntao / Zhao, Jun / Hu, Wenyuan / Du, Zhaohua / Gao, Danying	Properties of mortar with waste clay bricks as fine aggregate	898-907
Öz, Hatice Öznur	Properties of pervious concretes partially incorporating acidic pumice as coarse aggregate	601-609
Coletti, Chiara / Maritan, Lara / Cultrone, Giuseppe / Dalconi, Maria Chiara / Hein, Anno / Molina, Eduardo / Mazzoli, Claudio	Recycling trachyte waste from the quarry to the brick industry: Effects on physical and mechanical properties, and durability of new bricks	792-807
AzariJafari, Hessam / Tajadini, Azim / Rahimi, Motahareh / Berenjian, Javad	Reducing variations in the test results of self-consolidating lightweight concrete by incorporating pozzolanic materials	889-897
Kogbara, Reginald B. / Masad, Eyad A. / Woodward, David / Millar, Phillip	Relating surface texture parameters from close range photogrammetry to Grip-Tester pavement friction measurements	227-240
Li, Yang / Wang, Ruijun / Li, Shouyi / Zhao, Yun / Qin, Yuan	Resistance of recycled aggregate concrete containing low- and high-volume fly ash against the combined action of freeze–thaw cycles and sulfate attack	23-34
Huang, Fali / Li, Huajian / Yi, Zhonglai / Wang, Zhen / Xie, Yongjiang	The rheological properties of self-compacting concrete containing superplasticizer and air-entraining agent	833-838
Jung, Min Sun / Kim, Ki Beom / Lee, Sang Ah / Ann, Ki Yong	Risk of chloride-induced corrosion of steel in SF concrete exposed to a chloride-bearing environment	413-422
Chen, Jianhang / Hagan, Paul C. / Saydam, Serkan	Shear behaviour of a cement grout tested in the direct shear test	271-279
Kwon, Bong Ju / Kim, Dahae / Rhee, Suk Keun / Kim, Y. Richard	Spray injection patching for pothole repair using 100 percent reclaimed asphalt pavement	445-451
Sun, Yu / Li, Lihan	Strength assessment and mechanism analysis of cement stabilized reclaimed lime-fly ash macadam	118-129
Liu, Shutang / Li, Zhuozhi / Li, Yingyong / Cao, Weidong	Strength properties of Bayer red mud stabilized by lime-fly ash using orthogonal experiments	554-563
Alabdulhady, Meyyada Y. / Sneed, Lesley H.	A study of the effect of fiber orientation on the torsional behavior of RC beams strengthened with PBO-FRCM composite	839-854
Rodríguez de Sensale, Gemma / Rodríguez Viacava, Iliana	A study on blended Portland cements containing residual rice husk ash and limestone filler	873-888
Kwasny, Jacek / Aiken, Timothy A. / Soutsos, Marios N. / McIntosh, John A. / Cleland, David J.	Sulfate and acid resistance of lithomarge-based geopolymer mortars	537-553
Fernández, Álvaro / Lothenbach, Barbara / Alonso, Maria Cruz / García Calvo, José Luis	Thermodynamic modelling of short and long term hydration of ternary binders. Influence of Portland cement composition and blast furnace slag content	510-521
Patel, Ravi A. / Perko, Janez / Jacques, Diederik / De Schutter, Geert / Ye, Guang / Van Breugel, Klaas	A three-dimensional lattice Boltzmann method based reactive transport model to simulate changes in cement paste microstructure due to calcium leaching	158-170
Crupi, Vincenza / Fazio, Barbara / Gessini, Alessandro / Kis, Zoltán / La Russa, Mauro F. / Majolino, Domenico / Masciovecchio, Claudio / Ricca, Michela / Rossi, Barbara / Ruffolo, Silvestro A. / Venuti, Valentina	TiO2–SiO2–PDMS nanocomposite coating with self-cleaning effect for stone material: Finding the optimal amount of TiO2	464-471
Li, L. G. / Huang, Z. H. / Tan, Y. P. / Kwan, A. K. H. / Liu, F.	Use of marble dust as paste replacement for recycling waste and improving durability and dimensional stability of mortar	423-432
Huang, Guodong / Ji, Yongsheng / Li, Jun / Hou, Zhihui / Jin, Cheng	Use of slaked lime and Portland cement to improve the resistance of MSWI bottom ash-GBFS geopolymer concrete against carbonation	290-300
Sekhar, Darshan C. / Nayak, Sitaram	Utilization of granulated blast furnace slag and cement in the manufacture of compressed stabilized earth blocks	531-536
Kaplanvural, I. / Pekşen, E. / Özkap, K.	Volumetric water content estimation of C-30 concrete using GPR	141-146

Über diese
Datenseite
IssueID
35498
Veröffentlicht am:
12.12.2019
Geändert am:
09.01.2021

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - März 2018

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - März 2018

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.