Construction and Building Materials - Mai 2018

Erschienen:	Mai 2018

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Li, Peilong / Jiang, Xiuming / Guo, Kai / Xue, Yu / Dong, Hao	Analysis of viscoelastic response and creep deformation mechanism of asphalt mixture	22-32
Saha, Ashish Kumer / Khan, M. N. N. / Sarker, Prabir Kumar / Shaikh, Faiz Ahmed / Pramanik, Alokesh	The ASR mechanism of reactive aggregates in concrete and its mitigation by fly ash: A critical review	743-758
Liu, Xingzi / Yan, Mengpei / Galobardes, Isaac / Sikora, Karol	Assessing the potential of functionally graded concrete using fibre reinforced and recycled aggregate concrete	793-801
Nguyen, A. Q. / Klysz, G. / Deby, F. / Balayssac, J. P.	Assessment of the electrochemical state of steel reinforcement in water saturated concrete by resistivity measurement	455-466
Wang, Yanlei / Chen, Guipeng / Wan, Baolin / Lin, Hao / Zhang, Jin	Behavior of innovative circular ice filled steel tubular stub columns under axial compression	680-689
Damas, Ana Leonor / Veiga, Maria do Rosário / Faria, Paulina / Silva, António Santos	Characterisation of old azulejos setting mortars: A contribution to the conservation of this type of coatings	128-139
El-Nabouch, R. / Bui, Q.-B. / Plé, O. / Perrotin, P.	Characterizing the shear parameters of rammed earth material by using a full-scale direct shear box	414-420
Wu, Jieqiong / Diao, Bo / Zhang, Wuman / Ye, Yinghua / Liu, Zijian / Wang, Dan	Chloride diffusivity and service life prediction of fatigue damaged RC beams under seawater wet-dry environment	942-949
D'Antino, T. / Papanicolaou, Catherine (Corina)	Comparison between different tensile test set-ups for the mechanical characterization of inorganic-matrix composites	140-151
Yan, Jia-Bao / Wang, Xiao-Ting / Wang, Tao	Compressive behaviour of normal weight concrete confined by the steel face plates in SCS sandwich wall	437-454
Hlavička, Viktor / Lublóy, Éva	Concrete cone failure of bonded anchors in thermally damaged concrete	588-597
Kim, Jeong Su / Kwon, Seung Hee / Jang, Kyong Pil / Choi, Myoung Sung	Concrete pumping prediction considering different measurement of the rheological properties	493-503
Ren, Yuan / Yu, Zhenpeng / Huang, Qiao / Ren, Zheng	Constitutive model and failure criterions for lightweight aggregate concrete: A true triaxial experimental test	759-769
Qiao, Chunyu / Suraneni, Prannoy / Weiss, Jason	Damage in cement pastes exposed to NaCl solutions	120-127
Peng, Yang / Wu, Chao / Gan, Jieliang / Dong, Jun	Determination of the local constitutive properties of the welded steel joints using digital image correlation method	485-492
Shin, Hyun-Oh / Yoo, Doo-Yeol / Lee, Joo-Ha	Development of 300 MPa ultra-high-strength mortar through a special curing regime	312-320
de With, G. / Michalik, B. / Hoffmann, B. / Döse, M.	Development of a European harmonised standard to determine the natural radioactivity concentrations in building materials	913-918
Wang, Jun-Yan / Gao, Xiao-Long / Yan, Jia-Bao	Developments and mechanical behaviors of steel fiber reinforced ultra-lightweight cement composite with different densities	643-653
Faggiano, Beatrice / Marzo, Anna / Mazzolani, Federico M.	The Diplomatic Hall of the Royal Palace of Naples: Structural characterization of the timber roof by in situ ND investigations	1005-1016
Cheng, Shukai / Shui, Zhonghe / Sun, Tao / Yu, Rui / Zhang, Guozhi	Durability and microstructure of coral sand concrete incorporating supplementary cementitious materials	44-53
Rajasekar, A. / Arunachalam, K. / Kottaisamy, M. / Saraswathy, V.	Durability characteristics of Ultra High Strength Concrete with treated sugarcane bagasse ash	350-356
Han, Ding / Zhu, Guodong / Hu, Huimin / Li, Linglin	Dynamic simulation analysis of the tire-pavement system considering temperature fields	261-272
Najafabadi, Esmaeil Pournamazian / Bazli, Milad / Ashrafi, Hamed / Oskouei, Asghar Vatani	' Effect of applied stress and bar characteristics on the short-term creep behavior of FRP bars	960-968
Bu, Yuhuan / Hou, Xianhai / Wang, Chunyu / Du, Jiapei	Effect of colloidal nanosilica on early-age compressive strength of oil well cement stone at low temperature	690-696
Chen, Xue-Fei / Lin, Shao-run / Kou, Shi-Cong	Effect of composite photo-catalysts prepared with recycled clay brick sands and nano-TiO2 on methyl orange and NOx removal	152-160
Ben Mansour, H. / Dhouibi, L. / Idrissi, H.	Effect of Phosphate-based inhibitor on prestressing tendons corrosion in simulated concrete pore solution contaminated by chloride ions	250-260
Giosuè, C. / Yu, Q. L. / Ruello, M. L. / Tittarelli, F. / Brouwers, H. J. H.	Effect of pore structure on the performance of photocatalytic lightweight lime-based finishing mortar	232-242
Sabouri, Mohammadreza / Mirzaiyan, Danial / Moniri, Ali	Effectiveness of Linear Amplitude Sweep (LAS) asphalt binder test in predicting asphalt mixtures fatigue performance	281-290
Ding, Xunhao / Ma, Tao / Zhang, Weiguang / Zhang, Deyu / Yin, Teng	Effects by property homogeneity of aggregate skeleton on creep performance of asphalt concrete	205-213
Nazerigivi, Amin / Nejati, Hamid Reza / Ghazvinian, Abdolhadi / Najigivi, Alireza	Effects of SiO2 nanoparticles dispersion on concrete fracture toughness	672-679
Kashani, Alireza / Ngo, Tuan Duc / Hemachandra, Prashastha / Hajimohammadi, Ailar	Effects of surface treatments of recycled tyre crumb on cement-rubber bonding in concrete composite foam	467-473
Liu, Q. / Wu, W. / Pan, Y. / Liu, Z. Y. / Zhou, X. C. / Li, X. G.	Electrochemical mechanism of stress corrosion cracking of API X70 pipeline steel under different AC frequencies	622-633
Rangelov, Milena / Nassiri, Somayeh	Empirical time-dependent tortuosity relations for hydrating mortar mixtures based on modified Archie’s law	825-838
Patel, Yamini J. / Shah, Niraj	Enhancement of the properties of Ground Granulated Blast Furnace Slag based Self Compacting Geopolymer Concrete by incorporating Rice Husk Ash	654-662
Dyer, Paulo P. O. L. / de Lima, Maryangela Geimba / Klinsky, Luis Miguel G. / Silva, Silvelene A. / Coppio, Gustavo J. L.	Environmental characterization of Foundry Waste Sand (WFS) in hot mix asphalt (HMA) mixtures	474-484
Gu, Xingyu / Zhang, Xiaoyuan / Lv, Junxiu	Establishment and verification of prediction models of creep instability points of asphalt mixtures at high temperatures	303-311
Chen, Jian-Shiuh / Wang, Ta Jung / Lee, Cheng-Te	Evaluation of a highly-modified asphalt binder for field performance	539-545
Hwang, Euichul / Kim, Gyuyong / Choe, Gyeongcheol / Yoon, Minho / Gucunski, Nenad / Nam, Jeongsoo	Evaluation of concrete degradation depending on heating conditions by ultrasonic pulse velocity	511-520
Ghafari, Ehsan / Yuan, Ying / Wu, Chen / Nantung, Tommy / Lu, Na	Evaluation the compressive strength of the cement paste blended with supplementary cementitious materials using a piezoelectric-based sensor	504-510
Bozorgzad, Ashkan / Kazemi, Seyed-Farzan / Nejad, Fereidoon Moghadas	Evaporation-induced moisture damage of asphalt mixtures: Microscale model and laboratory validation	697-707
Allard, A. / Bilodeau, S. / Pissot, F. / Fournier, B. / Bastien, J. / Bissonnette, B.	Expansive behavior of thick concrete slabs affected by alkali-silica reaction (ASR)	421-436
Wang, Xiaowei / Gu, Xingyu / Jiang, Jiwang / Deng, Hanyu	Experimental analysis of skeleton strength of porous asphalt mixtures	13-21
Wang, Wenjie / Chouw, Nawawi	Experimental and theoretical studies of flax FRP strengthened coconut fibre reinforced concrete slabs under impact loadings	546-557
Abid, Sallal R. / Hilo, Ali N. / Daek, Yasir H.	Experimental tests on the underwater abrasion of Engineered Cementitious Composites	779-792
Shaaban, Ibrahim G. / Shaheen, Yousry B. / Elsayed, Essam L. / Kamal, Osama A. / Adesina, Peter A.	Flexural characteristics of lightweight ferrocement beams with various types of core materials and mesh reinforcement	802-816
Krobba, Benharzallah / Bouhicha, Mohamed / Kenai, Said / Courard, Luc	Formulation of low cost eco-repair mortar based on dune sand and Stipa tenacissima microfibers plant	950-959
Xu, Yidong / Zeng, Juqing / Chen, Wei / Jin, Ruoyu / Li, Bo / Pan, Zhihong	A holistic review of cement composites reinforced with graphene oxide	291-302
Ribeiro, Filipe / Sena-Cruz, José / Branco, Fernando G. / Júlio, Eduardo	Hybrid effect and pseudo-ductile behaviour of unidirectional interlayer hybrid FRP composites for civil engineering applications	871-890
Gao, Yangming / Zhang, Yuqing / Gu, Fan / Xu, Tao / Wang, Hao	Impact of minerals and water on bitumen-mineral adhesion and debonding behaviours using molecular dynamics simulations	214-222
Wei, Jian-Peng / Tian, Li-min / Hao, Ji-Ping	Improving the progressive collapse resistance of long-span single-layer spatial grid structures	96-108
Rodrigue, Alexandre / Duchesne, Josée / Fournier, Benoit / Bissonnette, Benoît	Influence of added water and fly ash content on the characteristics, properties and early-age cracking sensitivity of alkali-activated slag/fly ash concrete cured at ambient temperature	929-941
Liu, Yuanyuan / Lei, Shaomin / Lin, Min / Xia, Zhangjie / Pei, Zhenyu / Li, Bo	Influence of calcined coal-series kaolin fineness on properties of cement paste and mortar	558-565
Wang, Jingang / Molenaar, André A. A. / van de Ven, Martin F. C. / Wu, Shaopeng	Influence of internal structure on the permanent deformation behavior of a dense asphalt mixture	850-857
Sarkar, Manas / Maiti, Moumita / Malik, Muhammad Akbar / Xu, Shilang / Li, Qinghua / Mandal, Saroj	Influence of metal oxide (V2O5) in recycled waste materials for advanced durable construction technology	770-778
Pla, C. / Tenza-Abril, A. J. / Valdes-Abellan, J. / Benavente, D.	Influence of microstructure on fluid transport and mechanical properties in structural concrete produced with lightweight clay aggregates	388-396
Wang, Rui / Gao, Xiaojian / Li, Qiyan / Yang, Yingzi	Influence of splitting load on transport properties of ultra-high performance concrete	708-718
Mei, Junpeng / Ma, Baoguo / Tan, Hongbo / Li, Hainan / Liu, Xiaohai / Jiang, Wenbin / Zhang, Ting / Guo, Yulin	Influence of steam curing and nano silica on hydration and microstructure characteristics of high volume fly ash cement system	83-95
Coppola, L. / Coffetti, D. / Crotti, E.	Innovative carboxylic acid waterproofing admixture for self-sealing watertight concretes	817-824
Vuggumudi, Sreelatha / Alagusundaramoorthy, P.	Interaction diagrams for FRP strengthened RC rectangular columns with large aspect ratio	187-196
Sun, Zhiqi / Xu, Yongli / Tan, Yiqiu / Zhang, Lei / Xu, Huining / Meng, Anxin	Investigation of sand mixture interlayer reducing the thermal constraint strain in asphalt concrete overlay	357-366
Tsantilis, Lucia / Baglieri, Orazio / Santagata, Ezio	Low-temperature properties of bituminous nanocomposites for road applications	397-403
Peng, Lihua / Qin, Shan	Mechanical behaviour and microstructure of an artificial stone slab prepared using a SiO2 waste crucible and quartz sand	273-280
Adamu, Musa / Mohammed, Bashar S. / Liew, Mohd Shahir	Mechanical properties and performance of high volume fly ash roller compacted concrete containing crumb rubber and nano silica	521-538
Fang, Guohao / Bahrami, Hossein / Zhang, Mingzhong	Mechanisms of autogenous shrinkage of alkali-activated fly ash-slag pastes cured at ambient temperature within 24 h	377-387
Erdem, Savaş / Hanbay, Serap / Güler, Zeynel	Micromechanical damage analysis and engineering performance of concrete with colloidal nano-silica and demolished concrete aggregates	634-642
Yu, Bin / Gu, Xingyu / Ni, Fujian / Gao, Lei	Microstructure characterization of cold in-place recycled asphalt mixtures by X-ray computed tomography	969-976
Patti, Federico / Mansour, Kyrollos / Pannirselvam, Muthu / Giustozzi, Filippo	Mining materials to generate magnetically-triggered induction healing of bitumen on smart road pavements	577-587
Cao, Wei / Wang, Chao	A new comprehensive analysis framework for fatigue characterization of asphalt binder using the Linear Amplitude Sweep test	1-12
Moraes, J. C. B. / Font, A. / Soriano, L. / Akasaki, J. L. / Tashima, M. M. / Monzó, J. / Borrachero, M. V. / Payá, J.	New use of sugar cane straw ash in alkali-activated materials: A silica source for the preparation of the alkaline activator	611-621
Zheng, Jian-Jun / Zhang, Jian / Zhou, Xin-Zhu / Song, Wen-Bing	A numerical algorithm for evaluating the chloride diffusion coefficient of concrete with crushed aggregates	977-983
Cui, Jian / Hao, Hong / Shi, Yanchao	Numerical study of the influences of pressure confinement on high-speed impact tests of dynamic material properties of concrete	839-849
Fang, Chang-Hua / Jiang, Ze-Hui / Sun, Zheng-Jun / Liu, Huan-Rong / Zhang, Xiu-Biao / Zhang, Rong / Fei, Ben-Hua	An overview on bamboo culm flattening	65-74
Tabib, Seyed / Khuskivadze, Olga / Marks, Pamela / Nicol, Elena / Ding, Haibo / Hesp, Simon A. M.	Pavement performance compared with asphalt properties for five contracts in Ontario	719-725
Fundi, Sanewu Isaac / Kaluli, J. W. / Kinuthia, J.	Performance of interlocking laterite soil block walls under static loading	75-82
Ma, Siwei / Qian, Ye / Kawashima, Shiho	Performance-based study on the rheological and hardened properties of blended cement mortars incorporating palygorskite clays and carbon nanotubes	663-671
Zhang, Zengping / Jia, Meng / Jiao, Wenxiu / Qi, Bing / Liu, Haiting	Physical properties and microstructures of organic rectorites and their modified asphalts	33-43
Kheradmandi, Narges / Modarres, Amir	Precision of back-calculation analysis and independent parameters-based models in estimating the pavement layers modulus-Field and experimental study	598-610
Zuo, Yingfeng / Xiao, Junhua / Wang, Jian / Liu, Wenjie / Li, Xingong / Wu, Yiqiang	Preparation and characterization of fire retardant straw/magnesium cement composites with an organic-inorganic network structure	404-413
Zhang, Jiufu / Yan, Yun / Hu, Zhihua	Preparation and characterization of foamed concrete with Ti-extracted residues and red gypsum	109-119
Cao, Mingli / Xu, Ling / Zhang, Cong	Rheological and mechanical properties of hybrid fiber reinforced cement mortar	736-742
Mehdizadeh, Hamideh / Kani, Ebrahim Najafi	Rheology and apparent activation energy of alkali activated phosphorous slag	197-204
Buratti, C. / Belloni, E. / Lascaro, E. / Merli, F. / Ricciardi, P.	Rice husk panels for building applications: Thermal, acoustic and environmental characterization and comparison with other innovative recycled waste materials	338-349
Giustozzi, Filippo / Mansour, Kyrollos / Patti, Federico / Pannirselvam, Muthu / Fiori, Federico	Shear rheology and microstructure of mining material-bitumen composites as filler replacement in asphalt mastics	726-735
Wu, Huiqin / Zhang, Teng / Pan, Rongjun / Chun, Yeyang / Zhou, Hongmei / Zhu, Wanxu / Peng, Hanze / Zhang, Qing	Sintering-free preparation of porous ceramsite using low-temperature decomposing pore former and its sound-absorbing performance	367-376
Khalid, F. S. / Irwan, J. M. / Wan Ibrahim, M. H. / Othman, N. / Shahidan, S.	Splitting tensile and pullout behavior of synthetic wastes as fiber-reinforced concrete	54-64
Zhang, Shaohua / Caprani, Colin C. / Heidarpour, Amin	Strain rate studies of pultruded glass fibre reinforced polymer material properties: A literature review	984-1004
Ngo, Tri Thuong / Kim, Dong joo / Moon, Jae Heum / Kim, Sung Wook	Strain rate-dependent shear failure surfaces of ultra-high-performance fiber-reinforced concretes	901-912
Mohan, Ardra / Mini, K. M.	Strength and durability studies of SCC incorporating silica fume and ultra fine GGBS	919-928
De Domenico, Dario / Faleschini, Flora / Pellegrino, Carlo / Ricciardi, Giuseppe	Structural behavior of RC beams containing EAF slag as recycled aggregate: Numerical versus experimental results	321-337
Fedrigo, William / Núñez, Washington Peres / Castañeda López, Mario Alexander / Kleinert, Thaís Radünz / Ceratti, Jorge Augusto Pereira	A study on the resilient modulus of cement-treated mixtures of RAP and aggregates using indirect tensile, triaxial and flexural tests	161-169
Hajimohammadi, Ailar / Ngo, Tuan / Kashani, Alireza	Sustainable one-part geopolymer foams with glass fines versus sand as aggregates	223-231
Lu, Cong / Yu, Jing / Leung, Christopher K. Y.	Tensile performance and impact resistance of Strain Hardening Cementitious Composites (SHCC) with recycled fibers	566-576
Schiro, Gianni / Giongo, Ivan / Sebastian, Wendel / Riccadonna, Daniele / Piazza, Maurizio	Testing of timber-to-timber screw-connections in hybrid configurations	170-186
Zhu, Xingyi / Dai, Ziwei / Ling, Jianming / Chen, Long	Thermal expansion prediction of cement concrete based on a 3D micromechanical model considering interfacial transition zone	891-900
Al-Gemeel, Ali N. / Zhuge, Yan / Youssf, Osama	Use of hollow glass microspheres and hybrid fibres to improve the mechanical properties of engineered cementitious composite	858-870
Coppola, L. / Coffetti, D. / Crotti, E.	Use of tartaric acid for the production of sustainable Portland-free CSA-based mortars	243-249

Über diese
Datenseite
IssueID
35492
Veröffentlicht am:
12.12.2019
Geändert am:
09.01.2021

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - Mai 2018

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - Mai 2018

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.