Construction and Building Materials - Juni 2018

Erschienen:	Juni 2018

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Çiflikli, Murat / Sarıdemir, Mustafa / Soysat, Faruk	Adverse effects of high temperatures and freeze-thaw cycles on properties of HFRHSCs containing silica fume and metakaolin	507-519
Wu, Bangwei / Liu, Liping / Sun, Lijun	Analysis of parameters affecting asphalt mixture performance and new perspectives on the design parameters	625-632
Ulloa, Néstor A. / Baykara, Haci / Cornejo, Mauricio H. / Rigail, Andrés / Paredes, Cecilia / Villalba, José Luis	Application-oriented mix design optimization and characterization of zeolite-based geopolymer mortars	138-149
Shi, L. / Lin, S. T. K. / Lu, Yongcheng / Ye, L. / Zhang, Y. X.	Artificial neural network based mechanical and electrical property prediction of engineered cementitious composites	667-674
Lu, Yiyan / Liu, Zhenzhen / Li, Shan / Hu, Jiyue	Axial compression behavior of hybrid fiber reinforced concrete filled steel tube stub column	96-107
Jiang, Jiwang / Zhang, Zhen / Dong, Qiao / Ni, Fujian	Characterization and identification of asphalt mixtures based on Convolutional Neural Network methods using X-ray scanning images	72-80
Kalasová, Dominika / Dvořák, Karel / Slobodník, Marek / Všianský, Dalibor / Zikmund, Tomáš / Dluhoš, Jiří / Váňa, Rostislav / Bureš, Jaroslav / Kaiser, Jozef	Characterization of inner structure of limestone by X-ray computed sub-micron tomography	693-700
Wu, Chao / Pan, Yang / Ueda, Tamon	Characterization of the abrasion resistance and the acoustic wave attenuation of the engineered cementitious composites for runway pavement	537-546
Qi, Bing / Gao, Jianming / Chen, Fei / Shen, Daman	Chloride penetration into recycled aggregate concrete subjected to wetting–drying cycles and flexural loading	130-137
Li, L. G. / Zhao, Z. W. / Zhu, J. / Kwan, A. K. H. / Zeng, K. L.	Combined effects of water film thickness and polypropylene fibre length on fresh properties of mortar	586-593
Carret, Jean-Claude / Pedraza, Alvaro / Di Benedetto, Hervé / Sauzéat, Cédric	Comparison of the 3-dim linear viscoelastic behavior of asphalt mixes determined with tension-compression and dynamic tests	529-536
Jędrzejewska, Agnieszka / Benboudjema, Farid / Lacarrière, Laurie / Azenha, Miguel / Schlicke, Dirk / Dal Pont, Stefano / Delaplace, Arnaud / Granja, José / Hájková, Karolina / Joachim Heinrich, Peter / Sciume, Giuseppe / Strieder, Emanuel / Stierschneider, Elisabeth / Šmilauer, Vít / Troyan, Vyacheslav	COST TU1404 benchmark on macroscopic modelling of concrete and concrete structures at early age: Proof-of-concept stage	173-189
Qiu, Yanjun / Ding, Haibo / Rahman, Ali / Wang, Wenqi	Damage characteristics of waste engine oil bottom rejuvenated asphalt binder in the non-linear range and its microstructure	202-209
Li, Changming / Dong, Jingliang / Zhao, Shunbo / Liu, Hui / Yao, Wenyi / Wang, Lijiu	Development of low cost supplementary cementitious materials utilizing thermally activated Pisha sandstone	484-495
Shen, Dongya / Shi, Shuang / Xu, Tao / Huang, Xiaoming / Liao, Gongyun / Chen, Jun	Development of shape memory polyurethane based sealant for concrete pavement	474-483
Amnieh, Hassan Bakhshandeh / Zamzam, Mohammad Saber / Kolahchi, Reza	Dynamic analysis of non-homogeneous concrete blocks mixed by SiO2 nanoparticles subjected to blast load experimentally and theoretically	633-644
Wang, Jian / Qian, Chunxiang / Qu, Jun / Guo, Jingqiang	Effect of lithium salt and nano nucleating agent on early hydration of cement based materials	24-29
Han, Meizhao / Li, Jing / Muhammad, Yaseen / Hou, Dianhao / Zhang, Fenglei / Yin, Yuhua / Duan, Shaochan	Effect of polystyrene grafted graphene nanoplatelets on the physical and chemical properties of asphalt binder	108-119
Kundu, Sarada Prasad / Chakraborty, Sumit / Basu Majumder, Subhasish / Adhikari, Basudam	Effectiveness of the mild alkali and dilute polymer modification in controlling the durability of jute fibre in alkaline cement medium	330-342
Badeli, Saeed / Carter, Alan / Doré, Guy / Saliani, Saeed	Evaluation of the durability and the performance of an asphalt mix involving Aramid Pulp Fiber (APF): Complex modulus before and after freeze-thaw cycles, fatigue, and TSRST tests	60-71
Bao, Hao / Yu, Min / Liu, Yu / Ye, Jianqiao	Experimental and statistical study on the irregularity of carbonation depth of cement mortar under supercritical condition	47-59
Hadi, Muhammad N. S. / Goaiz, Hussam A. / Yu, Tao	Experimental investigation of CFRP confined hollow core Reactive Powder Concrete columns	343-355
Al-Gemeel, Ali N. / Zhuge, Yan	Experimental investigation of textile reinforced engineered cementitious composite (ECC) for square concrete column confinement	594-602
Qian, Peng / Xu, Qianjun	Experimental investigation on properties of interface between concrete layers	120-129
Ali, M. Shafqat / Leyne, Eileen / Saifuzzaman, Mohammad / Mirza, M. Saeed	An experimental study of electrochemical incompatibility between repaired patch concrete and existing old concrete	159-172
Cui, Shengai / Liu, Pin / Su, Jiao / Cui, Enqi / Guo, Chen / Zhu, Bing	Experimental study on mechanical and microstructural properties of cement-based paste for shotcrete use in high-temperature geothermal environment	603-612
Lepretre, E. / Chataigner, S. / Dieng, L. / Gaillet, L.	Fatigue strengthening of cracked steel plates with CFRP laminates in the case of old steel material	421-432
Nguyen, Q. T. / Ngo, T. / Tran, P. / Mendis, P. / Aye, L. / Baduge, S. Kristombu	Fire resistance of a prefabricated bushfire bunker using aerated concrete panels	410-420
Jelušič, Primož / Kravanja, Stojan	Flexural analysis of laminated solid wood beams with different shear connections	456-465
Sunayana, Sushree / Barai, Sudhirkumar V.	Flexural performance and tension-stiffening evaluation of reinforced concrete beam incorporating recycled aggregate and fly ash	210-223
Zhang, Cong / Han, Shicheng / Hua, Yuan	Flexural performance of reinforced self-consolidating concrete beams containing hybrid fibers	11-23
Zhang, Yu / Zhang, Yunsheng / Liu, Guojian / Yang, Yonggan / Wu, Meng / Pang, Bo	Fresh properties of a novel 3D printing concrete ink	263-271
Li, Zheng / He, Minjuan / Dong, Hanlin / Shu, Zhan / Wang, Xijun	Friction performance assessment of Non-Asbestos Organic (NAO) composite-to-steel interface and Polytetrafluoroethylene (PTFE) composite-to-steel interface: Experimental evaluation and application in seismic resistant structures	272-283
Tanyildizi, Harun / Asilturk, Erol	High temperature resistance of polymer-phosphazene concrete for 365 days	741-748
Jahanbakhsh, Hamid / Karimi, Mohammad M. / Jahangiri, Behnam / Nejad, F. Moghadas	Induction heating and healing of carbon black modified asphalt concrete under microwave radiation	656-666
Tang, Yu-Juan / Zuo, Xiao-Bao / Yin, Guang-Ji / Davoudi, Hadi / Li, Xiang-Nan	Influence of calcium leaching on chloride diffusivity in cement-based materials	310-319
Beushausen, Hans / Arito, Philemon	The influence of mix composition, w/b ratio and curing on restrained shrinkage cracking of cementitious mortars	38-46
Araya-Letelier, G. / Concha-Riedel, J. / Antico, F. C. / Valdés, C. / Cáceres, G.	Influence of natural fiber dosage and length on adobe mixes damage-mechanical behavior	645-655
Cao, Shuai / Song, Weidong / Yilmaz, Erol	Influence of structural factors on uniaxial compressive strength of cemented tailings backfill	190-201
Nagrockienė, Džigita / Daugėla, Aurelijus	Investigation into the properties of concrete modified with biomass combustion fly ash	369-375
Zhang, Lei / Liu, Quantao / Wu, Shaopeng / Rao, Yinqiu / Sun, Yihan / Xie, Jun / Pan, Pan	Investigation of the flow and self-healing properties of UV aged asphalt binders	401-409
Hartig, Jens U. / Facchini, Sebastiano / Haller, Peer	Investigations on lateral vehicle impact on moulded wooden tubes made of beech (Fagus sylvatica L.)	547-558
Lagüela, Susana / Solla, Mercedes / Puente, Iván / Prego, F. Javier	Joint use of GPR, IRT and TLS techniques for the integral damage detection in paving	749-760
Dehghan, S. M. / Najafgholipour, M. A. / Baneshi, V. / Rowshanzamir, M.	Mechanical and bond properties of solid clay brick masonry with different sand grading	1-10
Yadav, Santosh / Sieffert, Yannick / Crété, Eugénie / Vieux-Champagne, Florent / Garnier, Philippe	Mechanical behaviour of different type of shear band connections being used in reconstruction housing in Nepal	701-712
Senthilkumar, K. / Saba, N. / Rajini, N. / Chandrasekar, M. / Jawaid, M. / Siengchin, Suchart / Alotman, Othman Y.	Mechanical properties evaluation of sisal fibre reinforced polymer composites: A review	713-729
Chabi, Edem / Lecomte, André / Adjovi, Edmond C. / Dieye, Aïda / Merlin, André	Mix design method for plant aggregates concrete: Example of the rice husk	233-243
Wimalasiri, Manuka / Robert, D. J. / Li, Chun-Qing / Baji, Hassan	A new method to simulate permeability degradation of stressed concrete	284-292
Abbas, Yawar / Pargar, Farhad / Koleva, Dessi A. / Van Breugel, Klaas / Olthuis, Wouter / van den Berg, Albert	Non-destructive measurement of chloride ions concentration in concrete – A comparative analysis of limitations and prospects	376-387
Muthu, Murugan / Santhanam, Manu / Kumar, Mathava	Pb removal in pervious concrete filter: Effects of accelerated carbonation and hydraulic retention time	224-232
Valdés-Vidal, G. / Calabi-Floody, A. / Sanchez-Alonso, E.	Performance evaluation of warm mix asphalt involving natural zeolite and reclaimed asphalt pavement (RAP) for sustainable pavement construction	576-585
Luévano-Hipólito, E. / Martínez-de la Cruz, A.	Photocatalytic stucco for NO removal under artificial and by real weatherism	302-309
Li, Xiang / Lo, K. H. / Kwok, C. T. / Sun, Y. F. / Lai, K. K.	Post-fire mechanical and corrosion properties of duplex stainless steel: Comparison with ordinary reinforcing-bar steel	150-158
Wang, Yunyao / Shui, Zhonghe / Huang, Yun / Sun, Tao / Duan, Ping	Properties of coral waste-based mortar incorporating metakaolin: Part II. Chloride migration and binding behaviors	433-442
Babafemi, Adewumi John / du Plessis, Anton / Boshoff, William Peter	Pull-out creep mechanism of synthetic macro fibres under a sustained load	466-473
Ma, Cong / Zhao, Bin / Long, Guangcheng / Sang, Xiansong / Xie, Youjun	Quantitative study on strength development of earth-based construction prepared by organic clay and high-efficiency soil stabilizer	520-528
Suresha, S. N. / Ningappa, A.	Recent trends and laboratory performance studies on FAM mixtures: A state-of-the-art review	496-506
Nuaklong, Peem / Sata, Vanchai / Wongsa, Ampol / Srinavin, Korb / Chindaprasirt, Prinya	Recycled aggregate high calcium fly ash geopolymer concrete with inclusion of OPC and nano-SiO2	244-252
Ježová, Jana / Harou, Julie / Lambot, Sébastien	Reflection waveforms occurring in bistatic radar testing of columns and tree trunks	388-400
Shen, Aiqin / Lin, Senlin / Guo, Yinchuan / He, Tianqin / Lyu, Zhenghua	Relationship between flexural strength and pore structure of pavement concrete under fatigue loads and Freeze-thaw interaction in seasonal frozen regions	684-692
Wang, Xiaowei / Gu, Xingyu / Ni, Fujian / Deng, Hanyu / Dong, Qiao	Rutting resistance of porous asphalt mixture under coupled conditions of high temperature and rainfall	293-301
Huang, Yi / Li, Hongliang / Qian, Shunzhi	Self-sensing properties of Engineered Cementitious Composites	253-262
Zhang, Yu / Ma, Gang / Wang, Zhanfeng / Niu, Zheng / Liu, Yuanzhen / Li, Zhu	Shear behavior of reinforced glazed hollow bead insulation concrete beams	81-95
Lei, Yong / Wang, Hainian / Chen, Xi / Yang, Xu / You, Zhanping / Dong, Shi / Gao, Junfeng	Shear property, high-temperature rheological performance and low-temperature flexibility of asphalt mastics modified with bio-oil	30-37
Cheng, Yu / Hanif, Asad / Chen, E. / Ma, Guancong / Li, Zongjin	Simulation of a novel capacitive sensor for rebar corrosion detection	613-624
Zhang, Weiping / Zhang, Hongfei / Gu, Xianglin / Liu, Wei	Structural behavior of corroded reinforced concrete beams under sustained loading	675-683
Rajhans, Puja / Panda, Sarat Kumar / Nayak, Sanket	Sustainability on durability of self compacting concrete from C&D waste by improving porosity and hydrated compounds: A microstructural investigation	559-575
Madani, Hesam / Norouzifar, Mohammad Naser / Rostami, Jamshid	The synergistic effect of pumice and silica fume on the durability and mechanical characteristics of eco-friendly concrete	356-368
Zhou, Fujie / Karki, Pravat / Xie, Shangxian / Yuan, Joshua S. / Sun, Lijun / Lee, Robert / Barborak, Ryan	Toward the development of performance-related specification for bio-rejuvenators	443-455
Qamar, Furqan / Thomas, Terence / Ali, Majid	Use of natural fibrous plaster for improving the out of plane lateral resistance of mortarless interlocked masonry walling	320-329
Santoni, Andrea / Bonfiglio, Paolo / Mollica, Francesco / Fausti, Patrizio / Pompoli, Francesco / Mazzanti, Valentina	Vibro-acoustic optimisation of Wood Plastic Composite systems	730-740

Über diese
Datenseite
IssueID
35489
Veröffentlicht am:
12.12.2019
Geändert am:
09.01.2021

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - Juni 2018

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - Juni 2018

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.