Construction and Building Materials - Juli 2018

Erschienen:	Juli 2018

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Kravchuk, Roman / Landis, Eric N.	Acoustic emission-based classification of energy dissipation mechanisms during fracture of fiber-reinforced ultra-high-performance concrete	531-538
Siad, Hocine / Lachemi, Mohamed / Şahmaran, Mustafa / Mesbah, Habib A. / Hossain, Khandakar Anwar	Advanced engineered cementitious composites with combined self-sensing and self-healing functionalities	313-322
António, Julieta / Tadeu, António / Marques, Beatriz / Almeida, João A. S. / Pinto, Vasco	Application of rice husk in the development of new composite boards	432-439
Hassanieh, A. / Valipour, H. R. / Bradford, M. A.	Bolt shear connectors in grout pockets: Finite element modelling and parametric study	179-192
Hung, Le Chi / Goggins, Jamie / Fuente, Marta / Foley, Mark	Characterisation of specified granular fill materials for radon mitigation by soil depressurisation systems	213-227
Gonzalez, A. / Chamorro, A. / Barrios, I. / Osorio, A.	Characterization of unbound and stabilized granular materials using field strains in low volume roads	333-343
Petcherdchoo, Aruz	Closed-form solutions for modeling chloride transport in unsaturated concrete under wet-dry cycles of chloride attack	638-651
Si, Jingjing / Jia, Zhaoxia / Wang, Junyan / Yu, Xin / Li, Yang / Dong, Fuqiang / Jiang, Ruiling	Comparative analysis of cold-mixed epoxy and epoxy SBS-modified asphalts: Curing rheology, thermal, and mechanical properties	165-171
Hamim, Asmah / Yusoff, Nur Izzi Md. / Ceylan, Halil / Rosyidi, Sri Atmaja P. / El-Shafie, Ahmed	Comparative study on using static and dynamic finite element models to develop FWD measurement on flexible pavement structures	583-592
Ruiz, Gonzalo / Zhang, Xiaoxin / Edris, Walid Fouad / Cañas, Ignacio / Garijo, Lucía	A comprehensive study of mechanical properties of compressed earth blocks	566-572
Zeng, Lan / Li, Lijuan / Su, Zhi / Liu, Feng	Compressive test of GFRP-recycled aggregate concrete-steel tubular long columns	295-312
Ziolkowski, Mateusz / Kovtun, Maxim	Confined-Direct Electric Curing of NaOH-activated fly ash based brick mixtures under free drainage conditions: Part 2. Confined-DEC versus oven curing	452-461
zhou, Changlin / Zhu, Zheming / Wang, Zhihong / Qiu, Hao	Deterioration of concrete fracture toughness and elastic modulus under simulated acid-sulfate environment	490-499
Alvarez, Allex E. / Espinosa, Leidy V. / Caro, Silvia / Rueda, Eduardo J. / Aguiar, José P. / Loría, Luis G.	Differences in asphalt binder variability quantified through traditional and advanced laboratory testing	500-508
Gill, Anhad Singh / Siddique, Rafat	Durability properties of self-compacting concrete incorporating metakaolin and rice husk ash	323-332
Tan, Hongbo / Deng, Xiufeng / Gu, Benqing / Ma, Baoguo / Luo, Shuqiong / Zhi, Zhenzhen / Guo, Yulin / Zou, Fubing	Effect of borax and sodium tripolyphosphate on fluidity of gypsum paste plasticized by polycarboxylate superplasticizer	394-402
Hsu, Shihwen / Chi, Maochieh / Huang, Ran	Effect of fineness and replacement ratio of ground fly ash on properties of blended cement mortar	250-258
Baričević, Ana / Pezer, Martina / Rukavina, Marija Jelcic / Serdar, Marijana / Štirmer, Nina	Effect of polymer fibers recycled from waste tires on properties of wet-sprayed concrete	135-144
Xu, Xiong / Yu, Jianying / Xue, Lihui / He, Bianyang / Du, Wei / Zhang, Huang / Li, Ying	Effect of reactive rejuvenating system on physical properties and rheological characteristics of aged SBS modified bitumen	35-42
Uysal, Mucteba / Al-mashhadani, Mukhallad M. / Aygörmez, Yurdakul / Canpolat, Orhan	Effect of using colemanite waste and silica fume as partial replacement on the performance of metakaolin-based geopolymer mortars	271-282
Ye, Bin / Cheng, Zirui / Ni, Xueqian	Effects of multiple heating-cooling cycles on the permeability and microstructure of a mortar	156-164
Shahrajabian, Fatemeh / Behfarnia, Kiachehr	The effects of nano particles on freeze and thaw resistance of alkali-activated slag concrete	172-178
Shariatmadari, N. / Zeinali, S. M. / Mirzaeifar, H. / Keramati, M.	Evaluating the effect of using shredded waste tire in the stone columns as an improvement technique	700-709
Jagadesh, P. / Ramachandramurthy, A. / Murugesan, R.	Evaluation of mechanical properties of Sugar Cane Bagasse Ash concrete	608-617
Hou, Shuguang / Shi, Xijun / Deng, Yong / Gu, Fan	Evaluation of rutting and friction resistance of hot mix asphalt concrete using an innovative vertically loaded wheel tester	710-719
González-Taboada, Iris / González-Fonteboa, Belén / Martínez-Abella, Fernando / Seara-Paz, Sindy	Evaluation of self-compacting recycled concrete robustness by statistical approach	720-736
Varona, F. B. / Baeza, F. J. / Bru, D. / Ivorra, S.	Evolution of the bond strength between reinforcing steel and fibre reinforced concrete after high temperature exposure	359-370
Wen, Kejun / Bu, Changming / Liu, Shihui / Li, Yang / Li, Lin	Experimental investigation of flexure resistance performance of bio-beams reinforced with discrete randomly distributed fiber and bamboo	241-249
Pacheco-Torres, Rosalía / Cerro-Prada, Elena / Escolano, Félix / Varela, Fernando	Fatigue performance of waste rubber concrete for rigid road pavements	539-548
Gong, Hongren / Huang, Baoshan / Shu, Xiang	Field performance evaluation of asphalt mixtures containing high percentage of RAP using LTPP data	118-128
Wang, Luyao / Wang, Cheng / Liu, Pingwei / Jing, Zhijiao / Ge, Xuesong / Jiang, Yijun	The flame resistance properties of expandable polystyrene foams coated with a cheap and effective barrier layer	403-414
Dourado, N. / Silva, F. G. A. / de Moura, M. F. S. F.	Fracture behavior of wood-steel dowel joints under quasi-static loading	14-23
Uchechukwu Elinwa, Augustine / Abdulbasir, Gambo / Abdulkadir, Garba	Gum Arabic as an admixture for cement concrete production	201-212
Borowska, Joanna / Jezierski, Walery	Heat parameters of multi-sash windows in residential buildings	112-117
Saxena, Rajat / Siddique, Salman / Gupta, Trilok / Sharma, Ravi K. / Chaudhary, Sandeep	Impact resistance and energy absorption capacity of concrete containing plastic waste	415-421
Shui, Z. H. / Yu, R. / Chen, Y. X. / Duan, P. / Ma, J. T. / Wang, X. P.	Improvement of concrete carbonation resistance based on a structure modified Layered Double Hydroxides (LDHs): Experiments and mechanism analysis	228-240
Yang, Yonggan / Zhang, Yunsheng / She, Wei / Liu, Naidong / Liu, Zhiyong	In situ observing the erosion process of cement pastes exposed to different sulfate solutions with X-ray computed tomography	556-565
Barbosa, Ricardo Antonio / Hansen, Søren Gustenhoff / Hansen, Kurt Kielsgaard / Cao Hoang, Linh / Grelk, Bent	Influence of alkali-silica reaction and crack orientation on the uniaxial compressive strength of concrete cores from slab bridges	440-451
Sajid, Hizb Ullah / Kiran, Ravi	Influence of high stress triaxiality on mechanical strength of ASTM A36, ASTM A572 and ASTM A992 steels	129-134
Li, Bo / Lam, Eddie Siu Shu	Influence of interfacial characteristics on the shear bond behaviour between concrete and ferrocement	462-469
Nadesan, Manu S. / Dinakar, P.	Influence of type of binder on high-performance sintered fly ash lightweight aggregate concrete	665-675
Robayo-Salazar, Rafael / Mejía-Arcila, Johanna / Mejía de Gutiérrez, Ruby / Martínez, Edgar	Life cycle assessment (LCA) of an alkali-activated binary concrete based on natural volcanic pozzolan: A comparative analysis to OPC concrete	103-111
Tošić, Nikola / Marinković, Snežana / Pecić, Nenad / Ignjatović, Ivan / Dragaš, Jelena	Long-term behaviour of reinforced beams made with natural or recycled aggregate concrete and high-volume fly ash concrete	344-358
Seara-Paz, Sindy / González-Fonteboa, Belén / Martínez-Abella, Fernando / Carro-López, Diego	Long-term flexural performance of reinforced concrete beams with recycled coarse aggregates	593-607
Zhang, Fenglei / Muhammad, Yaseen / Liu, Yu / Han, Meizhao / Yin, Yuhua / Hou, Dianhao / Li, Jing	Measurement of water resistance of asphalt based on surface free energy analysis using stripping work between asphalt-aggregate system	422-431
Ma, Qinyong / Bai, Mei	Mechanical behavior, energy-storing properties and thermal reliability of phase-changing energy-storing concrete	43-49
Fan, Ding / Yang, Shangtong	Mechanical properties of C-S-H globules and interfaces by molecular dynamics simulation	573-582
Al-Qutaifi, Sarah / Nazari, Ali / Bagheri, Ali	Mechanical properties of layered geopolymer structures applicable in concrete 3D-printing	690-699
Sedaghatdoost, Arash / Behfarnia, Kiachehr	Mechanical properties of Portland cement mortar containing multi-walled carbon nanotubes at elevated temperatures	482-489
Ding, Lining / Liu, Xia / Wang, Xin / Huang, Hongjiao / Wu, Zhishen	Mechanical properties of pultruded basalt fiber-reinforced polymer tube under axial tension and compression	629-637
Lau, P. C. / Teo, D. C. L. / Mannan, M. A.	Mechanical, durability and microstructure properties of lightweight concrete using aggregate made from lime-treated sewage sludge and palm oil fuel ash	24-34
Cao, Mingli / Li, Li	New models for predicting workability and toughness of hybrid fiber reinforced cement-based composites	618-628
Lin, Xiaoshan	Numerical simulation of blast responses of ultra-high performance fibre reinforced concrete panels with strain-rate effect	371-382
Narong, O. L. C. / Sia, C. K. / Yee, S. K. / Ong, P. / Zainudin, A. / Nor, N. H. M. / Hassan, M. F.	Optimisation of EMI shielding effectiveness: Mechanical and physical performance of mortar containing POFA for plaster work using Taguchi Grey method	509-518
Lim, Yee Yan / Kwong, Kok Zee / Liew, Willey Yun Hsien / Padilla, Ricardo Vasquez / Soh, Chee Kiong	Parametric study and modeling of PZT based wave propagation technique related to practical issues in monitoring of concrete curing	519-530
Klinsky, L. M. G. / Kaloush, K. E. / Faria, V. C. / Bardini, V. S. S.	Performance characteristics of fiber modified hot mix asphalt	747-752
Khan, Waheed / Shehzada, Khan / Bibi, Tayyaba / Islam, Shams Ul / Wali Khan, Sajjad	Performance evaluation of Khyber Pakhtunkhwa Rice Husk Ash (RHA) in improving mechanical behavior of cement	89-102
Duic, Jason / Kenno, Sara / Das, Sreekanta	Performance of concrete beams reinforced with basalt fibre composite rebar	470-481
Yan, Genghua / Yuan, Ye / Hong, Ruijiang	Preparation of broadband antireflective coatings with ultra-low refractive index layer by sol-gel method	75-80
Liu, Shutang / Cao, Weidong / Li, Xiaojun / Li, Zhuozhi / Sun, Chunyang	Principle analysis of mix design and performance evaluation on Superpave mixture modified with Buton rock asphalt	549-555
Eskandarsefat, Shahin / Sangiorgi, Cesare / Dondi, Giulio / Lamperti, Riccardo	Recycling asphalt pavement and tire rubber: A full laboratory and field scale study	283-294
Tian, Qingyan / Zhang, Jiantong / Zhang, Yanlong	Similar simulation experiment of expressway tunnel in karst area	1-13
Chen, Jianhang / Xu, Chunhu	A study of the shear behavior of a Portland cement grout with the triaxial test	81-88
Liu, Yu Wen / Cho, Shih Wei	Study on application of fiber-reinforced concrete in sluice gates	737-746
He, Juan / Gao, Qie / Wu, Yonghua / He, Junhong / Pu, Xiaolin	Study on improvement of carbonation resistance of alkali-activated slag concrete	60-67
Shi-ping, Yin / Xiang-qian, Hu / Yun-tao, Hua	Study on the compression performance of small eccentric degradation columns strengthened with TRC in a chloride environment	50-59
Lv, Qingfeng / Jiang, Lusha / Ma, Bo / Zhao, Benhai / Huo, Zhensheng	A study on the effect of the salt content on the solidification of sulfate saline soil solidified with an alkali-activated geopolymer	68-74
Yang, Lin / Gao, Danying / Zhang, Yunsheng / She, Wei	Study on water and chloride transport in cracked mortar using X-ray CT, gravimetric method and natural immersion method	652-664
Cabrera-Luna, K. / Maldonado-Bandala, E. E. / Nieves-Mendoza, D. / Escalante García, J. I.	Supersulfated binders based on volcanic raw material: Optimization, microstructure and reaction products	145-155
Abdel-Gawwad, H. A. / Abo El-Enein, S. A. / Heikal, Mohamed / Abd El-Aleem, S. / Amer, A. A. / El-Kattan, I. M.	Synergistic effects of curing conditions and magnesium oxide addition on the physico-mechanical properties and firing resistivity of Portland cement mortar	676-689
Zhang, Wangxi / Deng, Xi / Zhang, Jinyi / Yi, Weijian	Tensile behavior of half grouted sleeve connection at elevated temperatures	259-270
Fraile-Garcia, Esteban / Ferreiro-Cabello, Javier / Mendivil-Giro, Manuel / Vicente-Navarro, Alejandro San	Thermal behaviour of hollow blocks and bricks made of concrete doped with waste tyre rubber	193-200
Jokhio, Gul Ahmed / Saad, Fatehi Mansoor / Gul, Yasmeen / Syed Mohsin, Sharifah Maszura / Ramli, Noram Irwan	Uniaxial compression and tensile splitting tests on adobe with embedded steel wire reinforcement	383-393

Über diese
Datenseite
IssueID
35487
Veröffentlicht am:
12.12.2019
Geändert am:
09.01.2021

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - Juli 2018

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - Juli 2018

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.