Construction and Building Materials - August 2018

Erschienen:	August 2018

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Martín, Domingo / Aparicio, Patricia / Galán, Emilio	Accelerated carbonation of ceramic materials. Application to bricks from Andalusian factories (Spain)	598-608
Abd-Allah, A. M. A. / Baghdady, A. R. / Dawood, Y. H.	Adequacy of carbonate aggregates as an alternative for chert aggregates in concrete manufacture	94-105
Zhang, Haitao / Gong, Mingyang / Zhang, Guangkuo / Yang, Bing	Analysis of asphalt durability based on inherent and improved performance	12-26
Narozny, M. / Zakowski, K. / Darowicki, K.	Application of Electrochemical Impedance Spectroscopy to evaluate cathodically protected coated steel in seawater	721-726
Panizza, Matteo / Natali, Marco / Garbin, Enrico / Tamburini, Sergio / Secco, Michele	Assessment of geopolymers with Construction and Demolition Waste (CDW) aggregates as a building material	119-133
Picazo, A. / Gálvez, J. C. / Alberti, M. G. / Enfedaque, A.	Assessment of the shear behaviour of polyolefin fibre reinforced concrete and verification by means of digital image correlation	565-578
She, Wei / Wang, Xiaohui / Miao, Changwen / Zhang, Qunchao / Zhang, Yunsheng / Yang, Jingxian / Hong, Jinxiang	Biomimetic superhydrophobic surface of concrete: Topographic and chemical modification assembly by direct spray	347-357
Hadj Sadok, Ahmed / Courard, Luc	Chloride diffusion and oxygen permeability of mortars with low active blast furnace slag	319-324
Carmona, Sergio / Molins, Climent / Aguado, Antonio	Correlation between bending test and Barcelona tests to determine FRC properties	673-686
Wolfs, R. J. M. / Bos, F. P. / Salet, T. A. M.	Correlation between destructive compression tests and non-destructive ultrasonic measurements on early age 3D printed concrete	447-454
Olivieri, Lorenzo / Tenorio, José A. / Revuelta, David / Navarro, Lidia / Cabeza, Luisa F.	Developing a PCM-enhanced mortar for thermally active precast walls	638-649
Ulas, Merve Acikgenc / Alyamaç, Kürşat Esat / Ulucan, Zülfü Çınar	Development of nomogram for the practical mix design of steel fiber reinforced concrete	437-446
Habib, A. O. / Aiad, I. / El-Hosiny, F. I. / Abd El-Aziz, A. M.	Development of the fire resistance and mechanical characteristics of silica fume-blended cement pastes using some chemical admixtures	163-174
Xu, Zhifeng / Chen, Zhongfan / Yang, Suhang	Effect of a new type of high-strength lightweight foamed concrete on seismic performance of cold-formed steel shear walls	287-300
Hizam, R. M. / Manalo, Allan C. / Karunasena, Warna / Bai, Yu	Effect of bolt threads on the double lap joint strength of pultruded fibre reinforced polymer composite materials	185-198
Cui, Hongzhi / Jin, Zhiyang / Zheng, Dapeng / Tang, Waiching / Li, Yubo / Yun, Yanchun / Lo, Tommy Yiu / Xing, Feng	Effect of carbon fibers grafted with carbon nanotubes on mechanical properties of cement-based composites	713-720
Wang, Yu / Zhang, Yi / Wang, Qingsong / Yang, Yi / Sun, Jinhua	The effect of glass panel dimension on the fire response of glass façades	588-597
Zhao, Gaowen / Li, Jingpei / Shao, Wei	Effect of mixed chlorides on the degradation and sulfate diffusion of cast-in-situ concrete due to sulfate attack	49-58
Ming, Li Yi / Feng, Cheng Pei / Siddig, Elfadil A. A.	Effect of phenolic resin on the performance of the styrene-butadiene rubber modified asphalt	465-473
Ouattara, Drissa / Belem, Tikou / Mbonimpa, Mamert / Yahia, Ammar	Effect of superplasticizers on the consistency and unconfined compressive strength of cemented paste backfills	59-72
Li, Biao / Xu, Lihua / Shi, Yuchuan / Chi, Yin / Liu, Qi / Li, Changning	Effects of fiber type, volume fraction and aspect ratio on the flexural and acoustic emission behaviors of steel fiber reinforced concrete	474-486
Lu, Yiyan / Tang, Wenshui / Li, Shan / Tang, Mingyong	Effects of simultaneous fatigue loading and corrosion on the behavior of reinforced beams	85-93
Singh, Navdeep / Singh, S. P.	Evaluating the performance of self compacting concretes made with recycled coarse and fine aggregates using non destructive testing techniques	73-84
Wang, Yu-Hang / Wu, Qiang / Yu, Jie / Chen, Y. Frank / Lu, Guo-Bing	Experimental and analytical studies on elastic-plastic local buckling behavior of steel material under complex cyclic loading paths	495-509
Abdallah, Maha Hussein / Mohamed, Hamdy M. / Masmoudi, Radhouane	Experimental assessment and theoretical evaluation of axial behavior of short and slender CFFT columns reinforced with steel and CFRP bars	535-550
Dias, Sara / Tadeu, António / António, Julieta / Almeida, João / Pedro, Filipe / Martins, Saúl / Serra, Catarina	Experimental study of expanded cork agglomerate blocks – Compressive creep behavior and dynamic performance	551-564
Cabrera, M. / Rosales, J. / Ayuso, J. / Estaire, J. / Agrela, F.	Feasibility of using olive biomass bottom ash in the sub-bases of roads and rural paths	266-275
Yang, Keun-Hyeok / Yoon, Hyun-Sub / Lee, Sang-Seob	Feasibility tests toward the development of protective biological coating mortars	1-11
Campione, Giuseppe / Cannella, Francesco / Cavaleri, Liborio	Flexural behavior of hybrid glass beams with rectangular cross-sections	134-145
Nath, S. K.	Geopolymerization behavior of ferrochrome slag and fly ash blends	487-494
Wang, Y. Y. (Yiyang) / Jin, F. (Feng) / Pan, J. W. (Jianwen) / Xie, Y. T. (Yuetao) / Wang, B. H. (Bohao)	Grating-box test: A testing method for filling performance evaluation of self-compacting mortar in granular packs	358-368
De Munck, M. / El Kadi, M. / Tsangouri, E. / Vervloet, J. / Verbruggen, S. / Wastiels, J. / Tysmans, T. / Remy, O.	Influence of environmental loading on the tensile and cracking behaviour of textile reinforced cementitious composites	325-334
Zhang, Lanfang / Yue, Yu	Influence of waste glass powder usage on the properties of alkali-activated slag mortars based on response surface methodology	527-534
Viguier, Joffrey / Bourgeay, Christophe / Rohumaa, Anti / Pot, Guillaume / Denaud, Louis	An innovative method based on grain angle measurement to sort veneer and predict mechanical properties of beech laminated veneer lumber	146-155
Zahid, Muhammad / Shafiq, Nasir / Jalal, Asif	Investigating the effects of solarcure curing method on the compressive strength, microstructure and polymeric reaction of fly ash based geopolymer	227-237
Venudharan, Veena / Biligiri, Krishna Prapoorna / Das, Narayan Chandra	Investigations on behavioral characteristics of asphalt binder with crumb rubber modification: Rheological and thermo-chemical approach	455-464
Liu, Fang / You, Zhanping / Yang, Xu / Wang, Hainian	Macro-micro degradation process of fly ash concrete under alternation of freeze-thaw cycles subjected to sulfate and carbonation	369-380
Lee, Adam D. / Shepherd, Paul / Evernden, Mark C. / Metcalfe, David	Measuring the effective Young’s modulus of structural silicone sealant in moment-resisting glazing joints	510-526
Lopes Crucho, João Miguel / Coelho das Neves, José Manuel / Dias Capitão, Silvino / de Picado-Santos, Luís Guilherme	Mechanical performance of asphalt concrete modified with nanoparticles: Nanosilica, zero-valent iron and nanoclay	309-318
Balapour, Mohammad / Joshaghani, Alireza / Althoey, Fadi	Nano-SiO2 contribution to mechanical, durability, fresh and microstructural characteristics of concrete: A review	27-41
Otero, J. / Starinieri, V. / Charola, A. E.	Nanolime for the consolidation of lime mortars: A comparison of three available products	394-407
Bouziadi, Farid / Boulekbache, Bensaid / Haddi, Abdelkader / Djelal, Chafika / Hamrat, Mostefa	Numerical analysis of shrinkage of steel fiber reinforced high-strength concrete subjected to thermal loading	381-393
Haeri, Hadi / Sarfarazi, Vahab / Bagher Shemirani, Alireza / Marji, Mohammad Fatehi	On the direct experimental measurement of mortar fracture toughness by a compression-to-tensile load transformer (CTLT)	687-712
Li, Xianjun / Hao, Jianying	Orthogonal test design for optimization of synthesis of super early strength anchoring material	42-48
Wang, Chaohui / Wen, Penghui / Wang, Menghao / Fan, Qiaojuan / Wang, Xinqi	Preparation and characterization of road alkali-activated blast furnace slag paste	175-184
Şahin, Murat / Turhan Erdoğan, Sinan / Bayer, Özgür	Production of lightweight aerated alkali-activated slag pastes using hydrogen peroxide	106-118
Soman, Mini / Mohan, Jebin	Rehabilitation of RC columns using ferrocement jacketing	156-162
Liu, Jin-Cheng / Tan, Kang Hai / Fan, Shengxin	Residual mechanical properties and spalling resistance of strain-hardening cementitious composite with Class C fly ash	253-265
Corradi, Marco / Di Schino, Andrea / Borri, Antonio / Rufini, Riccardo	A review of the use of stainless steel for masonry repair and reinforcement	335-346
Wang, Dehui / Shi, Caijun / Farzadnia, Nima / Shi, Zhenguo / Jia, Huangfei / Ou, Zhihua	A review on use of limestone powder in cement-based materials: Mechanism, hydration and microstructures	659-672
Gao, Yufa / Wang, Meng / Ma, Chao / Jia, Wanda / Lu, Zeguang / Long, Chen	Single and multi-factor analysis on screw-holding power of corn straw fiber brick	579-587
Aboulayt, Abdelilah / Jaafri, Reda / Samouh, Hamza / Cherki El Idrissi, Anass / Roziere, Emmanuel / Moussa, Redouane / Loukili, Ahmed	Stability of a new geopolymer grout: Rheological and mechanical performances of metakaolin-fly ash binary mixtures	420-436
Gwon, Seongwoo / Oh, Seok-Young / Shin, Myoungsu	Strength and microstructural characteristics of sulfur polymer composites containing binary cement and waste rubber	276-286
Singh, L. P. / Bisht, Vishakha / Aswathy, M. S. / Chaurasia, Leena / Gupta, Sanjay	Studies on performance enhancement of recycled aggregate by incorporating bio and nano materials	217-226
Apostolopoulou, M. / Delegou, E. T. / Alexakis, Emm. / Kalofonou, M. / Lampropoulos, K. C. / Aggelakopoulou, E. / Bakolas, A. / Moropoulou, A.	Study of the historical mortars of the Holy Aedicule as a basis for the design, application and assessment of repair mortars: A multispectral approach applied on the Holy Aedicule	618-637
Tuncel, Erman Yiğit / Pekmezci, Bekir Yılmaz	A sustainable cold bonded lightweight PCM aggregate production: Its effects on concrete properties	199-216
Asadi Zeidabadi, Zahra / Bakhtiari, Somayeh / Abbaslou, Hakime / Ghanizadeh, Ali Reza	Synthesis, characterization and evaluation of biochar from agricultural waste biomass for use in building materials	301-308
Pezeshki, Z. / Soleimani, A. / Darabi, A. / Mazinani, S. M.	Thermal transport in: Building materials	238-252
Lee, Seng Hua / Ashaari, Zaidon / Lum, Wei Chen / Abdul Halip, Juliana / Ang, Aik Fei / Tan, Li Peng / Chin, Kit Ling / Tahir, Paridah Md	Thermal treatment of wood using vegetable oils: A review	408-419
Zhang, Yu-rong / Zhang, Yun / Huang, Jun / Zhuang, Hua-xia / Zhang, Jun-zhi	Time dependence and similarity analysis of peak value of chloride concentration of concrete under the simulated chloride environment	609-617
Pahlavan, Parsa / Manzi, Stefania / Sansonetti, Antonio / Bignozzi, Maria Chiara	Valorization of organic additions in restorative lime mortars: Spent cooking oil and albumen	650-658

Über diese
Datenseite
IssueID
35484
Veröffentlicht am:
12.12.2019
Geändert am:
09.01.2021

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - August 2018

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - August 2018

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.