Construction and Building Materials - August 2018

Erschienen:	August 2018

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Jamsheer, Abdullah F. / Kupwade-Patil, Kunal / Büyüköztürk, Oral / Bumajdad, Ali	Analysis of engineered cement paste using silica nanoparticles and metakaolin using 29Si NMR, water adsorption and synchrotron X-ray Diffraction	698-709
Jadooe, Awad / Al-Mahaidi, Riadh / Abdouka, Kamiran	Behaviour of heat-damaged partially-insulated RC beams using NSM systems	211-228
Martínez, Juan Daniel / Betancourt-Parra, Santiago / Carvajal-Marín, Ivonne / Betancur-Vélez, Mariluz	Ceramic light-weight aggregates production from petrochemical wastes and carbonates (NaHCO3 and CaCO3) as expansion agents	124-133
Madadi, Amirhossein / Eskandari-Naddaf, Hamid / Shadnia, Rasoul / Zhang, Lianyang	Characterization of ferrocement slab panels containing lightweight expanded clay aggregate using digital image correlation technique	464-476
Dong, Niya / Ni, Fujian / Li, Song / Jiang, Jiwang / Zhao, Zili	Characterization of permanent deformation performance of asphalt mixture by multi-sequenced repeated load test	425-436
Buss, Ashley / Guirguis, Minas / Gransberg, Douglas	Chip seal aggregate evaluation and successful roads preservation	396-404
Guo, Xiaonong / Wang, Li / Shen, Zhirong / Zou, Jiamin / Liu, Linlin	Constitutive model of structural aluminum alloy under cyclic loading	643-654
Phan, Tam Minh / Park, Dae-Wook / Le, Tri Ho Minh	Crack healing performance of hot mix asphalt containing steel slag by microwaves heating	503-511
Their, Jumah Musdif / Özakça, Mustafa	Developing geopolymer concrete by using cold-bonded fly ash aggregate, nano-silica, and steel fiber	12-22
Wang, Xuebing / Xu, Kangning / Li, Yexue / Guo, Shengbo	Dissolution and leaching mechanisms of calcium ions in cement based materials	103-108
Mohammadhosseini, Hossein / Tahir, Mahmood Md.	Durability performance of concrete incorporating waste metalized plastic fibres and palm oil fuel ash	92-102
Terzić, Anja / Pezo, Lato / Mijatović, Nevenka / Stojanović, Jovica / Kragović, Milan / Miličić, Ljiljana / Andrić, Ljubiša	The effect of alternations in mineral additives (zeolite, bentonite, fly ash) on physico-chemical behavior of Portland cement based binders	199-210
Musselman, Eric S. / Dinehart, David W. / Walker, Sarah M. / Mancini, Matthew L.	The effect of holes on the creep behavior and flexural capacity of laminated veneer lumber (LVL) beams	167-176
Wang, Wenjing / Liu, Yuanzhen / Jiang, Lu / Zhao, Lin / Li, Zhu	Effect of physical properties of recycled coarse aggregate on the mechanical properties of recycled aggregate thermal insulation concrete (RATIC)	229-238
Wang, Yuli / He, Hang / He, Fengxia	Effect of slaked lime and aluminum sulfate on the properties of dry-mixed masonry mortar	117-123
Puthipad, Nipat / Ouchi, Masahiro / Attachaiyawuth, Anuwat	Effects of fly ash, mixing procedure and type of air-entraining agent on coalescence of entrained air bubbles in mortar of self-compacting concrete at fresh state	437-444
Subhy, Ayad / Menegusso Pires, Gustavo / Lo Presti, Davide / Airey, Gordon	The effects of laboratory ageing on rheological and fracture characteristics of different rubberised bitumens	188-198
Raneri, S. / Barone, G. / Mazzoleni, P. / Alfieri, I. / Bergamonti, L. / De Kock, T. / Cnudde, V. / Lottici, P. P. / Lorenzi, A. / Predieri, G. / Rabot, E. / Teixeira, J.	Efficiency assessment of hybrid coatings for natural building stones: Advanced and multi-scale laboratory investigation	412-424
Saghafi, Mohammad Hossein / Shariatmadar, Hashem	Enhancement of seismic performance of beam-column joint connections using high performance fiber reinforced cementitious composites	665-680
Zhang, Jizhe / Liu, Shengjie / Yao, Zhanyong / Wu, Shaopeng / Jiang, Hongguang / Liang, Ming / Qiao, Yaning	Environmental aspects and pavement properties of red mud waste as the replacement of mineral filler in asphalt mixture	605-613
Zakerzadeh, Mahdi / Abtahi, Sayyed Mahdi / Allafchian, Alireza / Chamani, Mohamad Reza	Examining the effect of different super hydrophobic nanomaterials on asphalt pavements	285-290
Arshad, Muhammad	Experimental evaluation of constitutive models for the estimation of resilient modulus values and an assessment of pressure sensitivity of granular blends containing reclaimed asphalt pavement materials	491-502
Eiras, Jesus N. / Payan, Cédric / Rakotonarivo, Sandrine / Garnier, Vincent	Experimental modal analysis and finite element model updating for structural health monitoring of reinforced concrete radioactive waste packages	531-543
Zhang, Linglei / Ji, Yong-sheng / Gao, Furong / Liu, Lili / Li, Jun	Experimental research and mechanism analysis on chloride ingress at different concrete zone along altitude in marine environment. Part 1. Moisture distribution	629-642
Zhang, Jin / Ma, Hao / Li, Cheng / Xu, Qingfeng / Li, Weibin	Experimental study on seismic performance of fire-exposed perforated brick masonry wall	77-91
Kamalakannan, Suruthi / Thirunavukkarasu, Ramya / Pillai, Radhakrishna G. / Santhanam, Manu	Factors affecting the performance characteristics of cementitious grouts for post-tensioning applications	681-691
Shanour, Ali S. / Said, Mohamed / Arafa, Alaa Ibrahim / Maher, Amira	Flexural performance of concrete beams containing engineered cementitious composites	23-34
Li, Ting / Long, Shi-guo	Grout assessment of plastic ducts in prestressed structures with an HHT-based method	35-43
Wan, Sha / Zhou, Xian / Zhou, Min / Han, Yi / Chen, Yuchi / Geng, Junjun / Wang, Teng / Xu, Sheng / Qiu, ZeDong / Hou, Haobo	Hydration characteristics and modeling of ternary system of municipal solid wastes incineration fly ash-blast furnace slag-cement	154-166
Abile, Raffaella / Russo, Alessandro / Limone, Claudio / Montagnaro, Fabio	Impact of the charge density on the behaviour of polycarboxylate ethers as cement dispersants	477-490
Deb, Sutapa / Mitra, Nilanjan / Basu Majumder, Subhasish / Maitra, Swati	Improvement in tensile and flexural ductility with the addition of different types of polypropylene fibers in cementitious composites	405-411
Ma, Ying / Qian, Jueshi	Influence of alkali sulfates in clinker on the hydration and hardening of Portland cement	351-363
Costa, H. / Carmo, R. N. F. / Júlio, E.	Influence of lightweight aggregates concrete on the bond strength of concrete-to-concrete interfaces	519-530
Kim, Sang-Hyo / Kim, Kun-Soo / Han, Oneil / Park, Jun-Seung	Influence of transverse rebar on shear behavior of Y-type perfobond rib shear connection	254-264
Erlbeck, L. / Schreiner, P. / Fasel, F. / Methner, F.-J. / Rädle, M.	Investigation of different materials for macroencapsulation of salt hydrate phase change materials for building purposes	512-518
Cao, Xinxin / Wang, Hao / Cao, Xuejuan / Sun, Wei / Zhu, Hongzhou / Tang, Boming	Investigation of rheological and chemical properties asphalt binder rejuvenated with waste vegetable oil	455-463
Xiao, Feipeng / Yao, Shenglei / Wang, Jingang / Li, Xinghai / Amirkhanian, Serji	A literature review on cold recycling technology of asphalt pavement	579-604
Singhal, Dhirendra / Talha Junaid, M. / Jindal, Bharat Bhushan / Mehta, Ankur	Mechanical and microstructural properties of fly ash based geopolymer concrete incorporating alccofine at ambient curing	298-307
Moreno-Navarro, F. / Sol-Sánchez, M. / Gámiz, F. / Rubio-Gámez, M. C.	Mechanical and thermal properties of graphene modified asphalt binders	265-274
Minto, James M. / Tan, Qian / Lunn, Rebecca J. / El Mountassir, Gráinne / Guo, Hongxian / Cheng, Xiaohui	' Microbial mortar'-restoration of degraded marble structures with microbially induced carbonate precipitation	44-54
Zhang, Yangyang / Chang, Jun	Microstructural evolution of aluminum hydroxide gel during the hydration of calcium sulfoaluminate under different alkali concentrations	655-664
Rissanen, Jouni / Ohenoja, Katja / Kinnunen, Paivo / Romagnoli, Marcello / Illikainen, Mirja	Milling of peat-wood fly ash: Effect on water demand of mortar and rheology of cement paste	143-153
Bui, Dac-Khuong / Nguyen, Tuan / Chou, Jui-Sheng / Nguyen-Xuan, H. / Ngo, Tuan Duc	A modified firefly algorithm-artificial neural network expert system for predicting compressive and tensile strength of high-performance concrete	320-333
Shah, Kwok Wei / Lu, Yong	Morphology, large scale synthesis and building applications of copper nanomaterials	544-578
Saleem, Muhammad	Multiple crack extension model of steel anchor bolts subjected to impact loading	364-374
Zhu, Lin / Li, Shujing / Li, Yuanbing / Xu, Nana	Novel applications of waste ceramics on the fabrication of foamed materials for exterior building walls insulation	291-297
Xu, Feng / Xiao, Yifei / Wang, Shuguang / Li, Weiwei / Liu, Weiqing / Du, DongSheng	Numerical model for corrosion rate of steel reinforcement in cracked reinforced concrete structure	55-67
Yeh, Po-Liang / Liu, Pei-Ling / Hsu, Ying-Yan	Parametric analysis of the impact-echo phase method in the differentiation of reinforcing bar and crack signals	375-381
Pang, Cuijuan / Hou, Dongshuai / Li, Zongjin	Piezoelectric and magnetoelectric behaviors of multifunctional cement-based laminated composites	334-341
Bergner, K. / Tosch, M. / Zauer, M. / Spickenheuer, A. / Wagenführ, A. / Heinrich, G.	Process development for the manufacture of fiber reinforced wood composites (FRWC)	275-284
Zhang, Tingting / Dieckmann, Elena / Song, Shizhuo / Xie, Jingyi / Yu, Zewei / Cheeseman, Christopher	Properties of magnesium silicate hydrate (M-S-H) cement mortars containing chicken feather fibres	692-697
Seetharam, S. C. / Patel, R. A. / Perko, J. / Jacques, D.	Quantification of leaching kinetics in OPC mortars via a mesoscale model	614-628
Khanzadeh Moradllo, Mehdi / Sadati, Seyedhamed / Shekarchi, Mohammad	Quantifying maximum phenomenon in chloride ion profiles and its influence on service-life prediction of concrete structures exposed to seawater tidal zone – A field oriented study	109-116
He, Bianyang / Yu, Jianying / Gu, Yi / Zhuang, Ronghua / Sun, Yubin	Rheological properties of lignosulfonate intercalated layered double hydroxides modified bitumen before and after ultraviolet aging	342-350
Wu, Jiangfeng / Wang, Linbing / Hou, Yue / Qian, Zhenyu / Meng, Lingjian / Zhao, Qian	Simulation on the Micro-Deval test for the aggregate wear properties measurement	445-454
Záleská, Martina / Pavlíková, Milena / Pokorný, Jaroslav / Jankovský, Ondřej / Pavlík, Zbyšek / Černý, Robert	Structural, mechanical and hygrothermal properties of lightweight concrete based on the application of waste plastics	1-11
de Sena Costa, Bruno Leonardo / de Oliveira Freitas, Júlio Cezar / Silva Santos, Paulo Henrique / Gomes da Silva Araújo, Romero / dos Santos Oliveira, Juan Fábio / de Araújo Melo, Dulce Maria	Study of carbonation in a class G Portland cement matrix at supercritical and saturated environments	308-319
Pu, Xingbo / Shi, Zhifei	Surface-wave attenuation by periodic pile barriers in layered soils	177-187
Gautam, Pradeep Kumar / Kalla, Pawan / Jethoo, Ajay Singh / Agrawal, Rahul / Singh, Harshwardhan	Sustainable use of waste in flexible pavement: A review	239-253
Hamdaoui, Ons / Ibos, Laurent / Mazioud, Atef / Safi, Mohamed / Limam, Oualid	Thermophysical characterization of Posidonia Oceanica marine fibers intended to be used as an insulation material in Mediterranean buildings	68-76
Nizevičienė, Dalia / Vaičiukynienė, Danutė / Michalik, Boguslaw / Bonczyk, Michał / Vaitkevičius, Vitoldas / Jusas, Vacius	The treatment of phosphogypsum with zeolite to use it in binding material	134-142
Bhogayata, Ankur C. / Arora, Narendra K.	Workability, strength, and durability of concrete containing recycled plastic fibers and styrene-butadiene rubber latex	382-395

Über diese
Datenseite
IssueID
35483
Veröffentlicht am:
12.12.2019
Geändert am:
09.01.2021

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - August 2018

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - August 2018

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.