Construction and Building Materials - März 2020

Erschienen:	März 2020

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Cruz, Paulo J. S. / Camões, Aires / Figueiredo, Bruno / Ribeiro, Manuel J. / Renault, João	Additive manufacturing effect on the mechanical behaviour of architectural stoneware bricks	117690
Beltrame, Neusa Ap. Munhak / Angulski da Luz, Caroline / Perardt, Mariana / Hooton, R. Doug	Alkali activated cement made from blast furnace slag generated by charcoal: Resistance to attack by sodium and magnesium sulfates	117710
Cao, Pengxu / Li, Guanghui / Luo, Jun / Rao, Mingjun / Jiang, Hao / Peng, Zhiwei / Jiang, Tao	Alkali-reinforced hydrothermal synthesis of lathy tobermorite fibers using mixture of coal fly ash and lime	117655
Yuan, Gaoang / Li, Xiaojun / Hao, Peiwen / Li, Dewen / Pan, Junli / Li, Aiguo	Application of flat-joint contact model for uniaxial compression simulation of large stone porous asphalt Mixes	117695
Ríos, Alejandro / Gonzalez, Marcelo / Montes, Carlos / Vásquez, Jeison / Arellano, Juan	Assessing the effect of fly ash with a high SO3 content in hybrid alkaline fly ash pastes (HAFAPs)	117776
Sang, Yuan / Yang, Yingzi	Assessing the freezing process of early age concrete by resistivity method	117689
Tenório Filho, José Roberto / Mannekens, Els / Van Tittelboom, Kim / Snoeck, Didier / De Belie, Nele	Assessment of the potential of superabsorbent polymers as internal curing agents in concrete by means of optical fiber sensors	117751
Zhang, Duo / Wu, Haoliang / Li, Victor C. / Ellis, Brian R.	Autogenous healing of Engineered Cementitious Composites (ECC) based on MgO-fly ash binary system activated by carbonation curing	117672
Long, Xu / Wang, Chun-Yan / Zhao, Pei-Zhi / Kang, Shao-Bo	Bond strength of steel reinforcement under different loading rates	117749
Shen, Ling / Jiang, Hui / Cao, Jindong / Zhang, Mengjiao / Zhang, Hui	A comparison study of the performance of three electro-migrating corrosion inhibitors in improving the concrete durability and rehabilitating decayed reinforced concrete	117673
Ceylan, Aygul / Girgin, Z.Canan	Comparisons on withdrawal resistance of resin and phosphate coated annular ring nails in CLT specimens	117742
Karampour, Hassan / Bourges, Mélanie / Gilbert, Benoit P. / Bismire, Andrew / Bailleres, Henri / Guan, Hong	Compressive behaviour of novel timber-filled steel tubular (TFST) columns	117734
Lu, Qiankun / Wang, Liwei / Xin, Juncheng / Tian, Huiyun / Wang, Xin / Cui, Zhongyu	Corrosion evolution and stress corrosion cracking of E690 steel for marine construction in artificial seawater under potentiostatic anodic polarization	117763
Niu, Ditao / Zhang, Lu / Fu, Qiang / Wen, Bo / Luo, Daming	Critical conditions and life prediction of reinforcement corrosion in coral aggregate concrete	117685
Padalu, Pravin Kumar Venkat Rao / Singh, Yogendra / Das, Sreekanta	Cyclic two-way out-of-plane testing of unreinforced masonry walls retrofitted using composite materials	117784
Wu, Jiujiang / Hesham El Naggar, M. / Li, Xiaonan / Wen, Hua	DEM analysis of geobag wall system filled with recycled concrete aggregate	117684
Hisseine, Ousmane A. / Tagnit-Hamou, Arezki	Development of ecological strain-hardening cementitious composites incorporating high-volume ground-glass pozzolans	117740
Shi, Jia-Wei / Cao, Wen-Hai / Chen, Lei / Li, Ang-Lin	Durability of wet lay-up BFRP single-lap joints subjected to freeze–thaw cycling	117664
Pham, Thong M. / Chen, Wensu / Khan, Abdul M. / Hao, Hong / Elchalakani, Mohamed / Tran, Tung M.	Dynamic compressive properties of lightweight rubberized concrete	117705
Hu, Bo / Li, Yuan / Liu, Yan	Dynamic slant shear bond behavior between new and old concrete	117779
Xu, Chao / Li, Haoxin / Yang, Xiaojie	Effect and characterization of the nucleation C-S-H seed on the reactivity of granulated blast furnace slag powder	117726
Hayes, Nolan W. / Giorla, Alain Benjamin / Trent, Walker / Cong, Derek / Le Pape, Yann / Ma, Zhongguo John	Effect of alkali-silica reaction on the fracture properties of confined concrete	117641
Tai, Yuh-Shiou / El-Tawil, Sherif	' Effect of component materials and mixing protocol on the short-term performance of generic ultra-high-performance concrete	117703
Wang, Xuan / Lam, Chi Chiu / Sun, Bo Chao / Noguchi, Takafumi / Iu, Vai Pan	Effect of curing environment on the tensile behaviour of FRCM composites	117729
Chu, Hongqiang / Liang, Yunchao / Guo, Ming-Zhi / Zhu, Zhengyu / Zhao, Sujing / Song, Zijian / Wang, Lin / Jiang, Linhua	Effect of electro-deposition on repair of cracks in reinforced concrete	117725
Yang, Fan / Yan, Dongming / Tang, Fujian / Chen, Genda / Liu, Yi / Chen, Shikun	Effect of sintering temperature on the microstructure, corrosion resistance and crack susceptibility of chemically reactive enamel (CRE) coating	117720
Sobhi, Saeid / Yousefi, Afshar / Behnood, Ali	The effects of Gilsonite and Sasobit on the mechanical properties and durability of asphalt mixtures	117676
Fan, Liang / Meng, Weina / Teng, Le / Khayat, Kamal H.	Effects of lightweight sand and steel fiber contents on the corrosion performance of steel rebar embedded in UHPC	117709
Xu, Jiaqiu / Yang, Enhui / Luo, Haoyuan / Ding, Haibo	Effects of warm mix additives on the thermal stress and ductile resistance of asphalt binders	117746
Omrani, H. / Hassini, L. / Benazzouk, A. / Beji, H. / ELCafsi, A.	Elaboration and characterization of clay-sand composite based on Juncus acutus fibers	117712
Awazhar, Nurul Aqilah / Khairuddin, Faridah Hanim / Rahmad, Suzielah / Fadzil, Syazwani Mohd / Ali Omar, Hend / Yusoff, Nur Izzi Md. / Badri, Khairiah Haji	Engineering and leaching properties of asphalt binders modified with polyurethane and Cecabase additives for warm-mix asphalt application	117699
Salsavilca, Jhoselyn / Yacila, Jhair / Tarque, Nicola / Camata, Guido	Experimental and analytical bond behaviour of masonry strengthened with steel reinforced grout (SRG)	117635
Valikhani, Alireza / Jahromi, Azadeh Jaberi / Mantawy, Islam M. / Azizinamini, Atorod	Experimental evaluation of concrete-to-UHPC bond strength with correlation to surface roughness for repair application	117753
Wang, Wei / Wang, Shanlin / Yao, Daozhou / Wang, Xikui / Yu, Xinquan / Zhang, Youfa	Fabrication of all-dimensional superhydrophobic mortar with enhanced waterproof ability and freeze-thaw resistance	117626
Charron, J.-P. / Desmettre, C. / Androuët, C.	Flexural and shear behaviors of steel and synthetic fiber reinforced concretes under quasi-static and pseudo-dynamic loadings	117659
El-Sherif, HossamEldin / Wakjira, Tadesse G. / Ebead, Usama	Flexural strengthening of reinforced concrete beams using hybrid near-surface embedded/externally bonded fabric-reinforced cementitious matrix	117748
Fang, Ying / Zhang, Zhengqi / Wang, Suqing / Li, Naiqiang	High temperature rheological properties of high modulus asphalt cement (HMAC) and its definition criteria	117657
Świerczyńska, Aleksandra / Fydrych, Dariusz / Landowski, Michał / Rogalski, Grzegorz / Łabanowski, Jerzy	Hydrogen embrittlement of X2CrNiMoCuN25-6-3 super duplex stainless steel welded joints under cathodic protection	117697
Deng, Mingke / Zhang, Wei / Li, Ning	In-plane cyclic loading tests of concrete hollow block masonry walls retrofitted with high ductile fiber-reinforced concrete	117758
İpek, Süleyman / Ayodele, Olabode Adekunle / Mermerdaş, Kasım	Influence of artificial aggregate on mechanical properties, fracture parameters and bond strength of concretes	117756
Zhang, Jizhe / Zhang, Xiaomeng / Liang, Ming / Jiang, Hongguang / Wei, Jincheng / Yao, Zhanyong	Influence of different rejuvenating agents on rheological behavior and dynamic response of recycled asphalt mixtures incorporating 60% RAP dosage	117778
Lv, Quan / Huang, Weidong / Zheng, Mao / Sadek, Husam / Zhang, Yuan / Yan, Chuanqi	Influence of gradation on asphalt mix rutting resistance measured by Hamburg Wheel Tracking test	117674
Santos, J. A. / Sanches, A. O. / Akasaki, J. L. / Tashima, M. M. / Longo, E. / Malmonge, J. A.	Influence of PZT insertion on Portland cement curing process and piezoelectric properties of 0–3 cement-based composites by impedance spectroscopy	117675
Segura, Jorge / Aponte, Diego / Pelà, Luca / Roca, Pere	Influence of recycled limestone filler additions on the mechanical behaviour of commercial premixed hydraulic lime based mortars	117722
You, Zhemin / Lai, Yuanming / Zeng, Hongyan / Yang, Yonghui	Influence of water and sodium chloride content on corrosion behavior of cast iron in silty clay	117762
Gong, Minghui / Xiong, Zijia / Deng, Cheng / Yang, Jun / Hong, Jinxiang	Influences of an artificial three-dimensional cementitious network on the fracture property of cement casting asphalt mixture	117656
Zhang, Yanrong / Gao, Liang / Cai, Xiaopei / Li, Qiangqiang / Kong, Xiangming	Influences of triethanolamine on the performance of cement pastes used in slab track	117670
Zhao, Hang / Andrawes, Bassem	Innovative prestressing technique using curved shape memory alloy reinforcement	117687
Yang, Jun / Hou, Dongshuai / Ding, Qingjun / Zhang, Gaozhan / Zhang, Yang / Hu, Hao	Insight on the nanoscale chemical degradation mechanism of MgCl2 attack in cement paste	117777
Fu, Qiuni / Yan, Libo / Ning, Ting / Wang, Bo / Kasal, Bohumil	Interfacial bond behavior between wood chip concrete and engineered timber glued by various adhesives	117743
Xie, Jun / Yang, Chao / Zhang, Linli / Zhou, Xiaojun / Wu, Shaopeng / Ye, Qunshan	Investigation of the physic-chemical properties and toxic potential of Basic Oxygen Furnace Slag (BOF) in asphalt pavement constructed after 15 years	117630
Wu, Jiantao / Wang, Yihua / Liu, Quan / Wang, Yu / Ago, Cadnel / Oeser, Markus	Investigation on mechanical performance of porous asphalt mixtures treated with laboratory aging and moisture actions	117694
Ghanoon, Seyed Alireza / Tanzadeh, Javad / Mirsepahi, Mehrnaz	Laboratory evaluation of the composition of nano-clay, nano-lime and SBS modifiers on rutting resistance of asphalt binder	117592
Lee, Hyung-Joo / Kim, Woosuk	Long-term durability evaluation of fiber-reinforced ECC using wood-based cellulose nanocrystals	117754
Hong, Rong-bao / Wu, Jin-rong / Cai, Hai-bing	Low-temperature crack resistance of coal gangue powder and polyester fibre asphalt mixture	117678
López, Anahí / Di Sarli, Alejandro Ramón	Measurements number in cementitious mixtures to define the color and its homogeneity	117636
Jiang, Wenguang / Li, Xiangguo / Lv, Yang / Jiang, Dongbing / Liu, Zhuolin / He, Chenhao	Mechanical and hydration properties of low clinker cement containing high volume superfine blast furnace slag and nano silica	117683
Pérez, Alejandro / Ferreño, Diego / Carrascal, Isidro A. / Polanco, Juan A. / Casado, José A. / Diego, Soraya	Metal cushion dampers for railway applications: A review	117711
Vinceslas, Théo / Lecompte, Thibaut / Hamard, Erwan / Hellouin de Ménibus, A. / Lenormand, Hélène / Colinart, Thibaut	Methods to evaluate earth slip cohesion to build with light earth	117665
Nunes, Cristiana / Viani, Alberto / Ševčík, Radek	Microstructural analysis of lime paste with the addition of linseed oil, stand oil, and rapeseed oil	117780
Nedunuri, Sai Surya Sree Aparna / Sertse, Seifemichael Getachew / Muhammad, Salman	Microstructural study of Portland cement partially replaced with fly ash, ground granulated blast furnace slag and silica fume as determined by pozzolanic activity	117561
Zhang, Liqing / Li, Linwei / Wang, Yanlei / Yu, Xun / Han, Baoguo	Multifunctional cement-based materials modified with electrostatic self-assembled CNT/TiO2 composite filler	117787
Jagsch, Valentin / Kuttke, Patricia / Lahayne, Olaf / Zelaya-Lainez, Luis / Scheiner, Stefan / Hellmich, Christian	Multiscale and multitechnique investigation of the elasticity of grooved rail steel	117768
Zhang, Yong / Ye, Guang / Yang, Zhengxian	New insights into long-term chloride transport in unsaturated cementitious materials: Role of degree of water saturation	117677
Xing, Chengwei / Liu, Liping / Sheng, Jianwei	A new progressed mastic aging method and effect of fillers on SBS modified bitumen aging	117732
Khajehnouri, Yasaman / Chouteau, Michel / Rivard, Patrice / Bérubé, Charles L.	Non-destructive non-invasive assessment of the development of alkali-silica reaction in concrete by spectral induced polarization: Evaluation of the complex electrical properties	117719
Zhou, Shengbo / Ma, Cong / Long, Guangcheng / Xie, Youjun	A novel non-Portland cementitious material: Mechanical properties, durability and characterization	117671
Gong, Jingwei / Jiang, Chunmeng / Tang, Xinjun / Zheng, Zuguo / Yang, Lixing	Optimization of mixture proportions in ternary low-heat Portland cement-based cementitious systems with mortar blends based on projection pursuit regression	117666
Garcia, A. / Salih, S. / Gómez-Meijide, B.	Optimum moment to heal cracks in asphalt roads by means electromagnetic induction	117627
Peng, Yuzhou / Peng, Xiao / Yang, Mao / Shi, Haoliang / Wang, Wangcheng / Tang, Xuechen / Wu, Yan	The performances of the baking-free bricks of non-sintered wrap-shell lightweight aggregates from dredged sediments	117587
Oren, Osman Hulusi / Gholampour, Aliakbar / Gencel, Osman / Ozbakkaloglu, Togay	Physical and mechanical properties of foam concretes containing granulated blast furnace slag as fine aggregate	117774
Zhang, Yong / Ye, Guang / Yang, Zhengxian	Pore size dependent connectivity and ionic transport in saturated cementitious materials	117680
Ostrowski, Krzysztof / Stefaniuk, Damian / Sadowski, Łukasz / Krzywiński, Kamil / Gicala, Magdalena / Różańska, Magdalena	Potential use of granite waste sourced from rock processing for the application as coarse aggregate in high-performance self-compacting concrete	117794
Zeng, Qing / Liu, Yaru / Liu, Qicheng / Liu, Peng / He, Yuhao / Zeng, Yuqin	Preparation and modification mechanism analysis of graphene oxide modified asphalts	117706
Zhao, Yi / Liang, Naixing / Chen, Hong / Li, Yuan	Preparation and properties of sintering red mud unburned road brick using orthogonal experiments	117739
Cai, Jiaxuan / Zhang, Guangming / Xie, Zhouhua / Zhu, Yichun	Preparation of foaming agent from photosynthetic bacteria liquid by direct thermal alkaline treatment	117715
Zhang, Yuanbo / Liu, Jicheng / Su, Zijian / Lu, Manman / Liu, Shuo / Jiang, Tao	Preparation of low-temperature composite phase change materials (C-PCMs) from modified blast furnace slag (MBFS)	117717
Liu, Binqing / Li, Jing / Han, Meizhao / Zhang, Zhengqi / Jiang, Xinyue	Properties of polystyrene grafted activated waste rubber powder (PS-ARP) composite SBS modified asphalt	117737
Pouranian, M. Reza / Notani, Mohammad Ali / Tabesh, Mahmood T. / Nazeri, Behrokh / Shishehbor, Mehdi	Rheological and environmental characteristics of crumb rubber asphalt binders containing non-foaming warm mix asphalt additives	117707
Ahmad Nazki, Moeed / Chopra, Tanuj / Chandrappa, Anush K.	Rheological properties and thermal conductivity of bitumen binders modified with graphene	117693
Yu, Huayang / Leng, Zhen / Zhang, Zeyu / Li, Danning / Zhang, Junhui	Selective absorption of swelling rubber in hot and warm asphalt binder fractions	117727
Tenza-Abril, A. J. / Benavente, D. / Pla, C. / Baeza-Brotons, F. / Valdes-Abellan, J. / Solak, A. M.	Statistical and experimental study for determining the influence of the segregation phenomenon on physical and mechanical properties of lightweight concrete	117642
Xing, Chao / Xu, Huining / Tan, Yiqiu / Wang, Dawei / Zhai, Changhai	Strain field distribution of asphalt mortar using digital image processing	117624
Praveenkumar, S. / Sankarasubramanian, G. / Sindhu, S.	Strength, permeability and microstructure characterization of pulverized bagasse ash in cement mortars	117691
Bai, Guoliang / Ma, Jinfeng / Liu, Biao / Chen, Xiaona	Study on the interfacial bond slip constitutive relation of I-section steel and fully recycled aggregate concrete	117688
Kramár, Samuel / Mayer, Aaron Kilian / Schöpper, Christian / Mai, Carsten	Use of basalt scrim to enhance mechanical properties of particleboards	117769
Li, Wentao / Yi, Yaolin	Use of carbide slag from acetylene industry for activation of ground granulated blast-furnace slag	117713
Liu, Qiong / Li, Biao / Xiao, Jianzhuang / Singh, Amardeep	Utilization potential of aerated concrete block powder and clay brick powder from C&D waste	117721
Roshan, Arman / Noël, Martin / Martín-Pérez, Beatriz	Validation of thick-walled cylinder analogy for modelling corrosion-induced concrete cover cracking	117724
Megid, Wael A. / Khayat, Kamal H.	Variations in surface quality of self-consolidation and highly workable concretes with formwork material	117638

Über diese
Datenseite
IssueID
35478
Veröffentlicht am:
12.12.2019
Geändert am:
12.12.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - März 2020

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - März 2020

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.