Construction and Building Materials - August 2019

Erschienen:	August 2019

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Tayfur, Sena / Alver, Ninel	A 3D parameter correction technique for damage assessment of structural reinforced concrete beams by acoustic emission	148-161
Ismail, Mohamed K. / Hassan, Assem A. A.	Abrasion and impact resistance of concrete before and after exposure to freezing and thawing cycles	849-861
Qiu, Xin / Xu, Jingxian / Xiao, Shanglin / Yang, Qing	Acoustic emission parameters and waveforms characteristics of fracture failure process of asphalt mixtures	135-147
Gijbels, Katrijn / Iacobescu, Remus Ion / Pontikes, Yiannis / Schreurs, Sonja / Schroeyers, Wouter	Alkali-activated binders based on ground granulated blast furnace slag and phosphogypsum	371-380
Ye, Wanli / Jiang, Wei / Li, Pengfei / Yuan, Dongdong / Shan, Jinhuan / Xiao, Jingjing	Analysis of mechanism and time-temperature equivalent effects of asphalt binder in short-term aging	823-838
Silva, Guido / Castañeda, David / Kim, Suyeon / Castañeda, Alvaro / Bertolotti, Bruno / Ortega-San-Martin, Luis / Nakamatsu, Javier / Aguilar, Rafael	Analysis of the production conditions of geopolymer matrices from natural pozzolana and fired clay brick wastes	633-643
Song, Liang / Song, Zhi / Wang, Chaohui / Wang, Xuancang / Yu, Gongxin	Arch expansion characteristics of highway cement-stabilized macadam base in Xinjiang, China	264-274
Tian, Li-min / Kou, Yue-feng / Hao, Ji-Ping	Axial compressive behaviour of sprayed composite mortar–original bamboo composite columns	726-736
Liu, Jinliang / Jia, Yanmin / Wang, Jun	Calculation of chloride ion diffusion in glass and polypropylene fiber-reinforced concrete	875-885
Govin, Alexandre / Bartholin, Marie-Claude / Schmidt, Wolfram / Grosseau, Philippe	Combination of superplasticizers with hydroxypropyl guar, effect on cement-paste properties	595-604
Walubita, Lubinda F. / Fuentes, Luis / Lee, Sang Ick / Dawd, Ibrahim / Mahmoud, Enad	Comparative evaluation of five HMA rutting-related laboratory test methods relative to field performance data: DM, FN, RLPD, SPST, and HWTT	737-753
Khalaf, Mohammed A. / Ban, Cheah Chee / Ramli, Mahyuddin	The constituents, properties and application of heavyweight concrete: A review	73-89
Picado-Santos, Luis G. / Capitão, Silvino D. / Feiteira Dias, J. L.	Crumb rubber asphalt mixtures by dry process: Assessment after eight years of use on a low/medium trafficked pavement	9-21
Wu, Yanqi / Li, Shengli / Wang, Dongwei / Zhao, Guanghui	Damage monitoring of masonry structure under in-situ uniaxial compression test using acoustic emission parameters	812-822
Martínez-García, Carolina / González-Fonteboa, Belén / Carro-López, Diego / Martínez-Abella, Fernando	Design and properties of cement coating with mussel shell fine aggregate	494-507
Gavali, Hindavi R. / Brás, Ana / Faria, Paulina / Ralegaonkar, Rahul V.	Development of sustainable alkali-activated bricks using industrial wastes	180-191
Le, Manh Tan / Tribout, Christelle / Escadeillas, Gilles	Durability of mortars with leftover recycled sand	391-400
Mahy, Julien G. / Paez, Carlos A. / Hollevoet, Jonas / Courard, Luc / Boonen, Elia / Lambert, Stéphanie D.	Durable photocatalytic thin coatings for road applications	422-434
Ashish, Prabin Kumar / Singh, Dharamveer	Effect of Carbon Nano Tube on performance of asphalt binder under creep-recovery and sustained loading conditions	523-543
Cao, Zhilong / Chen, Meizhu / Liu, Zhaoyang / He, Bianyang / Yu, Jianying / Xue, Lihui	Effect of different rejuvenators on the rheological properties of aged SBS modified bitumen in long term aging	709-717
Aslani, Farhad / Liu, Yinong / Wang, Yu	The effect of NiTi shape memory alloy, polypropylene and steel fibres on the fresh and mechanical properties of self-compacting concrete	644-659
Mohebi, Z. H. / Bahnamiri, A. B. / Dehestani, M.	Effect of polypropylene fibers on bond performance of reinforcing bars in high strength concrete	401-409
Gao, X. / Yu, Q. L.	Effects of an eco-silica source based activator on functional alkali activated lightweight composites	686-695
Zhang, Min / Zhang, Shuai / Wang, Meng / Lu, Zeguang / Jia, Wanda	Effects of dehumidification drying parameters on physical and chemical properties of biomass brick	696-708
Afroz, Mahzabin / Venkatesan, Srikanth / Patnaikuni, Indubhushan	Effects of hybrid fibers on the development of high volume fly ash cement composite	984-997
Zhang, Na / Yu, Hongfa / Wang, Nan / Gong, Wei / Tan, Yongshan / Wu, Chengyou	Effects of low- and high-calcium fly ash on magnesium oxysulfate cement	162-170
Liu, Jianhui / Farzadnia, Nima / Shi, Caijun / Ma, Xianwei	Effects of superabsorbent polymer on shrinkage properties of ultra-high strength concrete under drying condition	799-811
Luo, Jun / Zhu, Shengyang / Zhai, Wanming	An efficient model for vehicle-slab track coupled dynamic analysis considering multiple slab cracks	557-568
Abouhussien, Ahmed A. / Hassan, Assem A. A. / Ismail, Mohamed K. / AbdelAleem, Basem H.	Evaluating the cracking behavior of ECC beam-column connections under cyclic loading by acoustic emission analysis	958-968
Abdi Moghadam, Mehrdad / Izadifard, Ramezanali	Evaluation of shear strength of plain and steel fibrous concrete at high temperatures	207-216
Zhang, Jizhe / Sun, Hui / Jiang, Hongguang / Xu, Xiaobin / Liang, Ming / Hou, Yong / Yao, Zhanyong	Experimental assessment of reclaimed bitumen and RAP asphalt mixtures incorporating a developed rejuvenator	660-669
Chen, Wei / Ling, Xuan / Li, Qiu / Yuan, Bo / Li, Bo / Ma, Haosen	Experimental evidence on formation of ulexite in sulfoaluminate cement paste mixed with high concentration borate solution and its retarding effects	777-785
Wang, Bo / Uji, Kimitaka / Wu, Tao / Dai, Huijuan / Yan, Dejun / Guo, Rui	Experimental investigation of stress transfer and failure mechanism between existing concrete and CFRP grid-sprayed PCM	43-58
Meng, Xiaoyu / Chi, Yin / Jiang, Qinghui / Liu, Ruyan / Wu, Kun / Li, Shengjia	Experimental investigation on the flexural behavior of pervious concrete beams reinforced with geogrids	275-284
Rezaei Rad, Aryan / Weinand, Yves / Burton, Henry	Experimental push-out investigation on the in-plane force-deformation behavior of integrally-attached timber Through-Tenon joints	925-940
Zhang, Ge / Yu, Haiyang / Li, Huaming / Yang, Yingzi	Experimental study of deformation of early age concrete suffering from frost damage	410-421
Arezoumandi, Mahdi / Garcia, Derek / Volz, Jeffery S.	Experimental study on bond performance of Eco-Crete and reinforcing steel	475-481
Zhang, Yang / Zhu, Yanping / Yeseta, Marlyn / Meng, Dongliang / Shao, Xudong / Dang, Qi / Chen, Genda	Flexural behaviors and capacity prediction on damaged reinforcement concrete (RC) bridge deck strengthened by ultra-high performance concrete (UHPC) layer	347-359
Zhao, Mengxuan / Zhang, Guoping / Htet, Khant Win / Kwon, Minji / Liu, Chunyuan / Xu, Yan / Tao, Mingjiang	Freeze-thaw durability of red mud slurry-class F fly ash-based geopolymer: Effect of curing conditions	381-390
Cavalagli, N. / Kita, A. / Castaldo, V. L. / Pisello, A. L. / Ubertini, F.	Hierarchical environmental risk mapping of material degradation in historic masonry buildings: An integrated approach considering climate change and structural damage	998-1014
Roslan, Muhammad Khairi Azri / Ismail, Mohammad / Kueh, Ahmad Beng Hong / Zin, Muhammad Rawi Mohamed	High-density concrete: Exploring Ferro boron effects in neutron and gamma radiation shielding	718-725
Zhai, Yue / Li, Yan / Li, Yubai / Wang, Siwei / Liu, Yi / Song, Ki-Il	Impact of high-temperature-water cooling damage on the mechanical properties of concrete	233-243
Ren, Qiang / Zeng, Zhiyong / Jiang, Zhengwu / Chen, Qing	Incorporation of bamboo charcoal for cement-based humidity adsorption material	244-251
Yum, Woo Sung / Suh, Jung-Il / Sim, Sungwon / Yoon, Seyoon / Jun, Yubin / Oh, Jae Eun	Influence of calcium and sodium nitrate on the strength and reaction products of the CaO-activated GGBFS system	839-848
Huang, Huanghuang / Su, Anshuang / Gao, Xiaojian / Yang, Yingzi	Influence of formwork wall effect on fiber orientation of UHPC with two casting methods	310-320
Pan, Yunfeng / Xian, Guijun	Influence of long-term outdoor exposure in a frigid zone on the CFRP-to-concrete bond behavior	462-474
Zhao, Peng / Xu, Gang / Wang, Qing / Tang, Guangjie	Influence of sustained load on corrosion characteristics of reinforced concrete beams under galvanostatic accelerated corrosion	30-42
Tonoli, Gustavo Henrique Denzin / Carmello, Guilherme Fernando / Fioroni, Carlos Alexandre / Pereira, Tiago de Lima / Rocha, Gustavo / de Souza, Rui Barbosa / John, Vanderley Moacir / Savastano, Holmer	Influence of the initial moisture content on the carbonation degree and performance of fiber-cement composites	22-29
Andrade Dantas, Sérgio Roberto / Serafini, Ramoel / Romano, Roberto Cesar de Oliveira / Vittorino, Fulvio / Loh, Kai	Influence of the nano TiO2 dispersion procedure on fresh and hardened rendering mortar properties	544-556
Roy, Sushanta / Miura, Taito / Nakamura, Hikaru / Yamamoto, Yoshihito	Investigation on material stability of spherical shaped EAF slag fine aggregate concrete for pavement during thermal change	862-874
Li, Xin / Zheng, Xiaoyan / Ashraf, Mahmud / Li, Haitao	The longitudinal shear bond behavior of an innovative laminated fiber reinforced composite slab	508-522
Miljković, Miomir / Poulikakos, Lily / Piemontese, Fabio / Shakoorioskooie, Mahdieh / Lura, Pietro	Mechanical behaviour of bitumen emulsion-cement composites across the structural transition of the co-binder system	217-232
Nunes, Vitor A. / Borges, Paulo H. R. / Zanotti, Cristina	Mechanical compatibility and adhesion between alkali-activated repair mortars and Portland cement concrete substrate	569-581
Alzeebaree, Radhwan / Cevik, Abdulkadir / Nematollahi, Behzad / Sanjayan, Jay / Mohammedameen, Alaa / Gülşan, Mehmet Eren	Mechanical properties and durability of unconfined and confined geopolymer concrete with fiber reinforced polymers exposed to sulfuric acid	1015-1032
Deng, Changqing / Jiang, Yingjun / Lin, Hongwei / Ji, Xiaoping	Mechanical-strength-growth law and predictive model for cement-stabilized macadam	582-594
Wang, Zhao / Zhang, Dawei / Gong, Fuyuan / Mehrpay, Saeid / Ueda, Tamon	Mesoscale simulation of bond behaviors between concrete and reinforcement under the effect of frost damage with axisymmetric Rigid Body Spring Model	886-897
Liao, Fangfang / Wang, Mengqian / Tu, Lishang / Wang, Jian / Lu, Linfeng	Micromechanical fracture model parameter influencing factor study of structural steels and welding materials	898-917
Sadowski, Łukasz / Stefaniuk, Damian / Żak, Andrzej / Krakowiak, Konrad J.	Micromechanical properties within the interphase between heterogeneous layers made of cementitious composites	1033-1043
Zhu, Han / Wang, Zhongjian / Xu, Jie / Han, Qinghua	Microporous structures and compressive strength of high-performance rubber concrete with internal curing agent	128-134
Sidiq, Amir / Gravina, Rebecca J. / Setunge, Sujeeva / Giustozzi, Filippo	Microstructural analysis of healing efficiency in highly durable concrete	969-983
Li, Tao / Wang, Shan-Shan	Modeling diffusion coefficient of sulfate ion in concrete using probabilistic approach	435-446
Qin, Yinghong / Zhao, Yanlin / Chen, Xuejun / Wang, Lei / Li, Fanghua / Bao, Ting	Moist curing increases the solar reflectance of concrete	114-118
Paraskevoulakos, C. / Stitt, C. A. / Hallam, K. R. / Banos, A. / Leal Olloqui, M. / Jones, C. P. / Griffiths, G. / Adamska, A. M. / Jowsey, J. / Scott, T. B.	Monitoring the degradation of nuclear waste packages induced by interior metallic corrosion using synchrotron X-ray tomography	90-103
Yu, Zhenpeng / Tang, Rui / Cao, Peng / Huang, Qiao / Xie, Xinghua / Shi, Feiting	Multi-axial test and failure criterion analysis on self-compacting lightweight aggregate concrete	786-798
Zhao, Haitao / Liu, Jiaping / Yin, Xinlong / Wang, Yi / Huang, Donghui	A multiscale prediction model and simulation for autogenous shrinkage deformation of early-age cementitious materials	482-493
Zhang, Haitao / Liu, Zuoqiang / Meng, Xiangchen	Noise reduction characteristics of asphalt pavement based on indoor simulation tests	285-297
Bayar, Gökhan / Bilir, Turhan	A novel study for the estimation of crack propagation in concrete using machine learning algorithms	670-685
Bhutta, Aamer / Farooq, Mohammed / Banthia, Nemkumar	Performance characteristics of micro fiber-reinforced geopolymer mortars for repair	605-612
Wang, Yuyin / Zhang, Huan / Geng, Yue / Wang, Qinghe / Zhang, Sumei	Prediction of the elastic modulus and the splitting tensile strength of concrete incorporating both fine and coarse recycled aggregate	332-346
Jiang, Jun / Lu, Zhongyuan / Li, Jun / Fan, Yong / Niu, Yunhui	Preparation and hardened properties of lightweight gypsum plaster based on pre-swelled bentonite	360-370
Yu, Bo / Ma, Qian / Huang, Hai-chang / Chen, Zheng	Probabilistic prediction model for chloride diffusion coefficient of concrete in terms of material parameters	941-957
Naser, M. Z.	Properties and material models for common construction materials at elevated temperatures	192-206
Ma, Siwei / Kawashima, Shiho	A rheological approach to study the early-age hydration of oil well cement: Effect of temperature, pressure and nanoclay	119-127
Fu, Qinghong / Xu, Gang / Chen, Xianhua / Zhou, Jie / Sun, Fengmin	Rheological properties of SBS/CR-C composite modified asphalt binders in different aging conditions	1-8
Bullerjahn, F. / Zajac, M. / Skocek, J. / Ben Haha, M.	The role of boron during the early hydration of belite ye'elimite ferrite cements	252-263
Zhutovsky, Semion / Hooton, R. Douglas	Role of sample conditioning in water absorption tests	918-924
Shill, Sukanta Kumer / Al-deen, Safat / Ashraf, Mahmud	Saponification and scaling in ordinary concrete exposed to hydrocarbon fluids and high temperature at military airbases	765-776
Zhang, Cong / Guo, Haibo / Jung, Kiho / Harris, Richard / Chang, Wen-Shao	Screw reinforcement on dowel-type moment-resisting connections with cracks	59-72
Lim, Jay Sern / Ban Cheah, Chee / Ramli, Mahyuddin B.	The setting behavior, mechanical properties and drying shrinkage of ternary blended concrete containing granite quarry dust and processed steel slag aggregate	447-461
Sun, Qi / Cai, Chang / Zhang, Shukun / Tian, Shuo / Li, Bing / Xia, Yajie / Sun, Qingwei	Study of localized deformation in geopolymer cemented coal gangue-fly ash backfill based on the digital speckle correlation method	321-331
Rathod, Harsh / Gupta, Rishi	Sub-surface simulated damage detection using Non-Destructive Testing Techniques in reinforced-concrete slabs	754-764
Zhang, Wengang / Zhang, Y. X. / Jia, Zhirong / Wang, Fang / Ding, Longting	Test method and material design of asphalt mixture with the function of photocatalytic decomposition of automobile exhaust	298-309
Kakar, Muhammad Rafiq / Refaa, Zakariaa / Worlitschek, Jörg / Stamatiou, Anastasia / Partl, Manfred N. / Bueno, Moises	Thermal and rheological characterization of bitumen modified with microencapsulated phase change materials	171-179
Do, Tan Manh / Do, Anh Ngoc / Kang, Gyeong-o / Kim, Young-Sang	Utilization of marine dredged soil in controlled low-strength material used as a thermal grout in geothermal systems	613-622
Ji, Ru / Zheng, Yaxian / Zou, Zehui / Chen, Ziwei / Wei, Shen / Jin, Xiaoyong / Zhang, Mei	Utilization of mineral wool waste and waste glass for synthesis of foam glass at low temperature	623-632
Stolz, Jonathan / Boluk, Yaman / Bindiganavile, Vivek	Wood ash as a supplementary cementing material in foams for thermal and acoustic insulation	104-113

Über diese
Datenseite
IssueID
28348
Veröffentlicht am:
28.04.2019
Geändert am:
26.07.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - August 2019

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - August 2019

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.