Construction and Building Materials - Juli 2019

Erschienen:	Juli 2019

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Klink, Thomas / Stegmann, Florian / Slowik, Volker	Age dependence of cracking and deformability of a strain-hardening cement-based composite	641-647
Ayub, Tehmina / Khan, Sadaqat Ullah / Ayub, Ayesha	Analytical model for the compressive stress–strain behavior of PVA-FRC	581-593
Zheng, Kunlong / Yang, Xiaohua / Chen, Rui / Xu, Lixiao	Application of a capillary crystalline material to enhance cement grout for sealing tunnel leakage	497-505
Yousef, Ahmed M. / El-Metwally, Salah E. / Askar, Hamed H. / El-Mandouh, Mahmoud A.	Behavior of high-strength concrete interior slab-column connections with openings under seismic loading	619-630
Li, Chang / Guo, Jiang	Cracking simulation of asphalt concrete beam specimen using cohesive zone model	49-60
Viel, Marie / Collet, Florence / Lanos, Christophe	Development and characterization of thermal insulation materials from renewable resources	685-697
Zhihui, Li / Rui, Zhuo / Yonghua, Zhao / Qian, Cao / Weijun, Qin	Discriminating wavenumbers selection of ATR-FTIR spectra for identifying graded asphalt	565-573
Guo, Jinlong / Cai, Jian / Chen, QingJun / Liu, Xinpei / Wang, Yongqi / Zuo, Zhiliang	Dynamic behaviour and energy dissipation of reinforced recycled aggregate concrete beams under impact	143-157
Ribeiro, D. V. / Paula, G. R. / Morelli, M. R.	Effect of boric acid content on the properties of magnesium phosphate cement	557-564
Oh, Sung-Rok / Choi, Yun Wang / Kim, Yong Jic	Effect of cement powder based self-healing solid capsule on the quality of mortar	574-580
Ipek, Metin / Aksu, Mecbure	The effect of different types of fiber on flexure strength and fracture toughness in SIFCON	207-218
Shen, Ling / Jiang, Hui / Cao, Jindong / Zhang, Hui	The effect of electro-migrating 3-Aminopropyltriethoxysilane on the improvement of the reinforced concrete durability	101-110
Liu, Shuhua / Wang, Lu / Yu, Baoying	Effect of modified phosphogypsum on the hydration properties of the phosphogypsum-based supersulfated cement	9-16
Yacoub, Aiman / Djerbi, Assia / Fen-chong, Teddy	The effect of the drying temperature on water porosity and gas permeability of recycled sand mortar	677-684
Buzov, A. / Radnic, J. / Grgić, N. / Baloević, G.	Effect of the joint type on the seismic behaviour of a free-standing multi-drum column	121-132
Wang, Yan / Zhang, Shaohui / Niu, Ditao / Su, Li / Luo, Daming	Effects of silica fume and blast furnace slag on the mechanical properties and chloride ion distribution of coral aggregate concrete	648-658
Khongpermgoson, Penpichcha / Abdulmatin, Akkadath / Tangchirapat, Weerachart / Jaturapitakkul, Chai	Evaluation of compressive strength and resistance of chloride ingress of concrete using a novel binder from ground coal bottom ash and ground calcium carbide residue	631-640
Xu, Weiting / Chen, J. J. / Wei, Jiangxiong / Zhang, Bin / Yuan, Xiongzhou / Xu, Peng / Yu, Qijun / Ren, Jie	Evaluation of inherent factors on flowability, cohesiveness and strength of cementitious mortar in presence of zeolite powder	61-73
Zhou, Jie / Chen, Xianhua / Xu, Gang / Fu, Qinghong	Evaluation of low temperature performance for SBS/CR compound modified asphalt binders based on fractional viscoelastic model	326-336
König, Jakob / Nemanič, Vincenc / Žumer, Marko / Petersen, Rasmus R. / Østergaard, Martin B. / Yue, Yuanzheng / Suvorov, Danilo	Evaluation of the contributions to the effective thermal conductivity of an open-porous-type foamed glass	337-343
Lopes Crucho, João Miguel / Coelho das Neves, José Manuel / Dias Capitão, Silvino / de Picado-Santos, Luís Guilherme	Evaluation of the durability of asphalt concrete modified with nanomaterials using the TEAGE aging method	178-186
Liu, Kaiqiang / Cheng, Xiaowei / Zhang, Chi / Gao, Xianshu / Zhuang, Jia / Guo, Xiaoyang	Evolution of pore structure of oil well cement slurry in suspension–solid transition stage	382-398
Qiu, Junli / Zhang, Hong / Zhou, Jianting / Ma, Hu / Liao, Leng	Experimental analysis of the correlation between bending strength and SMFL of corroded RC beams	594-605
Wang, Bo / Guo, Xinxin / Jin, Hui / Li, Fuhai / Song, Yang	Experimental study on degradation behaviors of rock bolt under the coupled effect of stress and corrosion	37-48
Huang, Dunwen / Wei, Jun / Liu, Xiaochun / Xiang, Ping / Zhang, Shizhuo	Experimental study on long-term performance of steel-concrete composite bridge with an assembled concrete deck	606-618
Hamada, Hussein M. / Yahaya, Fadzil M. / Muthusamy, Khairunisa / Jokhio, Gul A. / Humada, Ali M.	Fresh and hardened properties of palm oil clinker lightweight aggregate concrete incorporating Nano-palm oil fuel ash	344-354
Spagnoli, Andrea / Brighenti, Roberto / Biancospino, Marco / Rossi, Marco / Roncella, Riccardo	Geometrically non-linear bending of plates: Implications in curved building façades	698-708
Lv, Xuesen / Wang, Kaituo / He, Yan / Cui, Xuemin	A green drying powder inorganic coating based on geopolymer technology	441-448
Kamau-Devers, Kanotha / Kortum, Zachary / Miller, Sabbie A.	Hydrothermal aging of bio-based poly(lactic acid) (PLA) wood polymer composites: Studies on sorption behavior, morphology, and heat conductance	290-302
Magalhães, Margareth da Silva / Faleschini, Flora / Pellegrino, Carlo / Brunelli, Katya	Influence of alkali addition on the setting and mechanical behavior of cement pastes and mortars with electric arc furnace dust	413-419
Shen, Dejian / Liu, Ci / Li, Chengcai / Zhao, Xiaoguang / Jiang, Guoqing	Influence of Barchip fiber length on early-age behavior and cracking resistance of concrete internally cured with super absorbent polymers	219-231
Serafini, Ramoel / Dantas, Sérgio R. A. / Salvador, Renan P. / Agra, Ronney R. / Rambo, Dimas A. S. / Berto, Antonio F. / de Figueiredo, Antonio D.	Influence of fire on temperature gradient and physical-mechanical properties of macro-synthetic fiber reinforced concrete for tunnel linings	254-268
Pang, Yuyang / Wu, Gang / Wang, Haitao / Liu, Ye	Interfacial bond-slip degradation relationship between CFRP plate and steel plate under freeze-thaw cycles	242-253
Akindahunsi, Akindehinde Ayotunde	Investigation into the use of extracted starch from cassava and maize as admixture on the creep of concrete	659-667
Wang, Yuanzhan / Liu, Chenxi / Wang, Yuchi / Li, Qingmei / Liu, Zhen	Investigation on chloride threshold for reinforced concrete by a test method combining ANDT and ACMT	158-168
Pu, ShaoYun / Zhu, Zhiduo / Wang, HaiRong / Song, Weilong / Wei, RenJie	Mechanical characteristics and water stability of silt solidified by incorporating lime, lime and cement mixture, and SEU-2 binder	111-120
Wang, Xiaorui / Zhou, Aiping / Zhao, Longlong / Chui, Ying Hei	Mechanical properties of wood columns with rectangular hollow cross section	133-142
Yu, Feng / Li, Dongang / Niu, Ditao / Zhu, Defeng / Kong, Zhengyi / Zhang, Nannan / Fang, Yuan	A model for ultimate bearing capacity of PVC-CFRP confined concrete column with reinforced concrete beam joint under axial compression	668-676
Kang, Yang / Zhou, Dunhong / Wu, Qiang / Liang, Rui / Shangguan, Shaoxin / Liao, Zhiwei / Wei, Ning	Molecular dynamics study on the glass forming process of asphalt	430-440
Ramaglia, Giancarlo / Lignola, Gian Piero / Fabbrocino, Francesco / Prota, Andrea	Multi-parameters mechanical modeling to derive a confinement model for masonry columns	303-317
Yao, Zeheng / Lu, Guilin / Yang, Jun / Gong, Minghui / Tang, Zhiyun / Xue, Jiayue / Zhang, Xiaorui	Nanoindentation characterization of aging gradient of mastic in asphalt mixtures	187-195
Wang, Haopeng / Liu, Xueyan / Apostolidis, Panos / Erkens, Sandra / Scarpas, Tom	Numerical investigation of rubber swelling in bitumen	506-515
Xie, Feng / Li, Jingpei / Li, Lin / Zhao, Gaowen / Yao, Minbo	Numerical solution and damage evaluation for cast-in-situ piles exposed to external sulfate attack	269-279
Liu, Kaizhi / Yu, Rui / Shui, Zhonghe / Li, Xiaosheng / Guo, Cheng / Yu, Bailian / Wu, Shuo	Optimization of autogenous shrinkage and microstructure for Ultra-High Performance Concrete (UHPC) based on appropriate application of porous pumice	369-381
Arıcı, Erdinç / Keleştemur, Oğuzhan	Optimization of mortars containing steel scale using Taguchi based grey relational analysis method	232-241
Liu, Mengmei / Han, Sen / Wang, Zhaoyu / Ren, Wanyan / Li, Wei	Performance evaluation of new waterborne epoxy resin modified emulsified asphalt micro-surfacing	93-100
Singh, Gurpreet / Kumar, Harmesh / Singh, Sehijpal	Performance evaluation-PET resin composite composed of red mud, fly ash and silica fume	527-538
Mansourkhaki, Ali / Aghasi, Amir	Performance of rubberized asphalt containing liquid nanomaterial anti-strip agent	468-474
Taraghi, Pouya / Showkati, Hossein / Firouzsalari, Saeed Eyvazinejad	The performance of steel conical shells reinforced with CFRP laminates subjected to uniform external pressure	484-496
Saba, M. / Lizarazo-Marriaga, J. / Hernandez-Romero, N. L. / Quiñones-Bolaños, E. E.	Physico-mechanical characterization of the limestone used in Cartagena walls and a proposal for their restoration process	420-429
Naber, C. / Stegmeyer, S. / Jansen, D. / Goetz-Neunhoeffer, F. / Neubauer, J.	The PONKCS method applied for time resolved XRD quantification of supplementary cementitious material reactivity in hydrating mixtures with ordinary Portland cement	449-457
Wu, Qisheng / Ma, Hongen / Chen, Qiujing / Huang, Zichen / Zhang, Changsen / Yang, Tao	Preparation of waterproof block by silicate clinker modified FGD gypsum	318-325
Lu, Wenda / Ma, Baoguo / Su, Ying / He, Xingyang / Jin, Zihao / Qi, Huahui	Preparation of α-hemihydrate gypsum from phosphogypsum in recycling CaCl2 solution	399-412
Huseien, Ghasan Fahim / Sam, Abdul Rahman Mohd / Shah, Kwok Wei / Asaad, Mohammad Ali / Tahir, Mahmood Md. / Mirza, Jahangir	Properties of ceramic tile waste based alkali-activated mortars incorporating GBFS and fly ash	355-368
Jimenez-Relinque, E. / Castellote, M.	Quick assessment of the photocatalytic activity of TiO2 construction materials by nitroblue tetrazolium (NBT) ink	1-8
Wang, Xiaoying / Zhong, Yang	Reflective crack in semi-rigid base asphalt pavement under temperature-traffic coupled dynamics using XFEM	280-289
Liu, Yuantao / Chen, Bing	Research on the preparation and properties of a novel grouting material based on magnesium phosphate cement	516-526
Sun, Jing / Yuan, Lei / Wang, Pengfei	Residual bearing capacity of infilled frame of multi-ribbed composite wall after high temperature	196-206
Sivilevičius, Henrikas / Vislavičius, Kęstutis	Simulation of composition of recycled hot-mix asphalt mixture produced in asphalt mixing plant	17-27
Gong, Fangyuan / Guo, Shuaicheng / Chen, Siyu / You, Zhanping / Liu, Yu / Dai, Qingli	Strength and durability of dry-processed stone matrix asphalt containing cement pre-coated scrap tire rubber particles	475-483
Zhai, Ximei / Zhang, Xiansong / Cao, Can / Hu, Wenbo	Study on seismic performance of precast fabricated RC shear wall with opening filling	539-556
Casolo, Siro / Biolzi, Luigi / Carvelli, Valter / Barbieri, Gaia	Testing masonry blockwork panels for orthotropic shear strength	74-92
Abu-Jdayil, Basim / Mourad, Abdel-Hamid / Hittini, Waseem / Hassan, Muzamil / Hameedi, Suhaib	Traditional, state-of-the-art and renewable thermal building insulation materials: An overview	709-735
Mazhoud, Brahim / Perrot, Arnaud / Picandet, vincent / Rangeard, Damien / Courteille, Eric	Underwater 3D printing of cement-based mortar	458-467
Zhang, Xiuzhen / Zhao, Sixue / Liu, Zhichao / Wang, Fazhou	Utilization of steel slag in ultra-high performance concrete with enhanced eco-friendliness	28-36
Goyal, Shweta / Siddique, Rafat / Jha, Sujant / Sharma, Devender	Utilization of textile sludge in cement mortar and paste	169-177

Über diese
Datenseite
IssueID
28347
Veröffentlicht am:
28.04.2019
Geändert am:
26.07.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - Juli 2019

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - Juli 2019

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.