Construction and Building Materials - Juli 2019

Erschienen:	Juli 2019

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Lau, Chee Keong / Lee, Hyuk / Vimonsatit, Vanissorn / Huen, Wai Yeong / Chindaprasirt, Prinya	Abrasion resistance behaviour of fly ash based geopolymer using nanoindentation and artificial neural network	635-644
Vaitkus, Audrius / Gražulyte, Judita / Šernas, Ovidijus / Vorobjovas, Viktoras / Kleizienė, Rita	An algorithm for the use of MSWI bottom ash as a building material in road pavement structural layers	456-466
Karozou, A. / Konopisi, S. / Paulidou, E. / Stefanidou, M.	Alkali activated clay mortars with different activators	85-91
Ling, Jianming / Wei, Fulu / Zhao, Hongduo / Tian, Yu / Han, Bingye / Chen, Zhi'ang	Analysis of airfield composite pavement responses using full-scale accelerated pavement testing and finite element method	596-606
Querol, Nuria / Barreneche, Camila / Cabeza, Luisa F.	Asphalt emulsion formulation: State of the art of formulation, properties and results of HIPR emulsions	19-26
Lo Monte, Francesco / Felicetti, Roberto / Meda, Alberto / Bortolussi, Anna	Assessment of concrete sensitivity to fire spalling: A multi-scale experimental approach	476-485
Li, Zhuxuan / Chen, Tao / Wang, Xian	Behavior of flat grouted connections subjected to lateral pressure and vertical load	329-341
Aslani, Farhad / Gunawardena, Yasoja / Dehghani, Ayoub	Behaviour of concrete filled glass fibre-reinforced polymer tubes under static and flexural fatigue loading	57-76
Coutinho, M. L. / Miller, A. Z. / Phillip, A. / Mirão, J. / Dias, L. / Rogerio-Candelera, M. A. / Saiz-Jimenez, C. / Martin-Sanchez, P. M. / Cerqueira-Alves, L. / Macedo, M. F.	Biodeterioration of majolica glazed tiles by the fungus Devriesia imbrexigena	49-56
Majhi, R. K. / Nayak, A. N.	Bond, durability and microstructural characteristics of ground granulated blast furnace slag based recycled aggregate concrete	578-595
Mangat, P. S. / Ojedokun, Olalekan O.	Bound chloride ingress in alkali activated concrete	375-387
Mymrin, Vsévolod / Molinetti, Andrea / Alekseev, Kirill / Avanci, Monica A. / Klitzke, Walderson / Silva, Dimass A. / Ferraz, Fernando A. / Iarozinski, N. Alfredo / Catai, Rodrigo E.	Characterization of construction materials on the base of mortar waste, activated by aluminum anodization sludge and lime production waste	202-209
Al-Rousan, Rajai Z. / AL-Tahat, Mohammad F.	Consequence of surface preparation techniques on the bond behavior between concrete and CFRP composites	362-374
Zhao, Peng / Zhang, Xiuzhi / Qin, Lei / Zhang, Yunsheng / Zhou, Lizhi	Conservation of disappearing traditional manufacturing process for Chinese grey brick: Field survey and laboratory study	531-540
Har, Nicolae / Lăzărean, Alexandru / Iliescu, Mihai / Ciont, Nicolae / Abrudan, Ioan Florin	Degradation processes of iron-sulfides and calcite containing aggregates from asphaltic mixtures	745-754
Akturk, Busra / Kizilkanat, Ahmet B. / Kabay, Nihat	Effect of calcium hydroxide on fresh state behavior of sodium carbonate activated blast furnace slag pastes	388-399
Jain, Smrati / Pradhan, Bulu	Effect of cement type on hydration, microstructure and thermo-gravimetric behaviour of chloride admixed self-compacting concrete	304-316
Biró, András / Hlavička, Viktor / Lublóy, Éva	Effect of fire-related temperatures on natural stones	92-101
Messori, Massimo / Nobili, Andrea / Signorini, Cesare / Sola, Antonella	Effect of high temperature exposure on epoxy-coated glass textile reinforced mortar (GTRM) composites	765-774
Sonebi, Mohammed / Perrot, Arnaud	Effect of mix proportions on rheology and permeability of cement grouts containing viscosity modifying admixture	687-697
Amini, Kamran / Vosoughi, Payam / Ceylan, Halil / Taylor, Peter	Effect of mixture proportions on concrete performance	77-84
Kooshkaki, Ali / Eskandari-Naddaf, Hamid	Effect of porosity on predicting compressive and flexural strength of cement mortar containing micro and nano-silica by multi-objective ANN modeling	176-191
Zhang, Linglei / Ji, Yongsheng / Li, Jun / Gao, Furong / Huang, Guodong	Effect of retarders on the early hydration and mechanical properties of reactivated cementitious material	192-201
Wang, Xin / Huang, Jian / Dai, Shaobin / Ma, Baoguo / Tan, Hongbo / Jiang, Qi	Effect of silica fume particle dispersion and distribution on the performance of cementitious materials: A theoretical analysis of optimal sonication treatment time	549-560
Chaves Figueiredo, Stefan / Copuroglu, Oguzhan / Schlangen, Erik	Effect of viscosity modifier admixture on Portland cement paste hydration and microstructure	818-840
Fusade, Lucie / Viles, Heather / Wood, Chris / Burns, Colin	The effect of wood ash on the properties and durability of lime mortar for repointing damp historic buildings	500-513
Guo, Yunlong / Markine, Valéri / Qiang, Weile / Zhang, Hui / Jing, Guoqing	Effects of crumb rubber size and percentage on degradation reduction of railway ballast	210-224
Shi, Di / Yao, Yan / Ye, Jiayuan / Zhang, Wensheng	Effects of seawater on mechanical properties, mineralogy and microstructure of calcium silicate slag-based alkali-activated materials	569-577
Mohammadhosseini, Hossein / Lim, Nor Hasanah Abdul Shukor / Tahir, Mahmood Md. / Alyousef, Rayed / Alabduljabbar, Hisham / Samadi, Mostafa	Enhanced performance of green mortar comprising high volume of ceramic waste in aggressive environments	607-617
Yao, Hui / Dai, Qingli / You, Zhanping / Zhang, Jinxi / Lv, Songtao / Xiao, Xianghui	Evaluation of contact angle between asphalt binders and aggregates using Molecular Dynamics (MD) method	727-736
Wang, X. F. / Yang, Z. H. / Fang, C. / Han, N. X. / Zhu, G. M. / Tang, J. N. / Xing, F.	Evaluation of the mechanical performance recovery of self-healing cementitious materials – its methods and future development: A review	400-421
Dilbas, H. / Çakır, Ö. / Atis, C. D.	Experimental investigation on properties of recycled aggregate concrete with optimized Ball Milling Method	716-726
Zhou, Haonan / Li, Hui / Abdelhady, Ahmed / Liang, Xiao / Wang, Hanbing / Yang, Bing	Experimental investigation on the effect of pore characteristics on clogging risk of pervious concrete based on CT scanning	130-139
Liu, Fangyu / Ding, Wenqi / Qiao, Yafei	An experimental investigation on the integral waterproofing capacity of polypropylene fiber concrete with fly ash and slag powder	675-686
Liu, Lang / Yang, Pan / Qi, Chongchong / Zhang, Bo / Guo, Lijie / Song, Ki-Il	An experimental study on the early-age hydration kinetics of cemented paste backfill	283-294
Tanzadeh, Reza / Tanzadeh, Javad / honarmand, Mehrdad / Tahami, Seyed Amid	Experimental study on the effect of basalt and glass fibers on behavior of open-graded friction course asphalt modified with nano-silica	467-475
Xiao, Feipeng / Guo, Rui / Wang, Jingang	Flame retardant and its influence on the performance of asphalt – A review	841-861
El-Sayed, Taha A.	Flexural behavior of RC beams containing recycled industrial wastes as steel fibers	27-38
Booya, Emad / Gorospe, Karla / Ghaednia, Hossein / Das, Sreekanta	Free and restrained plastic shrinkage of cementitious materials made of engineered kraft pulp fibres	236-246
Chong, Linlin / Yang, Jianming / Xu, Zhan Zhan / Xu, Xuancheng	Freezing and thawing resistance of MKPC paste under different corrosion solutions	663-674
Azinović, Boris / Danielsson, Henrik / Serrano, Erik / Kramar, Miha	Glued-in rods in cross laminated timber – Numerical simulations and parametric studies	431-441
Törzs, T. / Lu, G. / Monteiro, A. O. / Wang, D. / Grabe, J. / Oeser, M.	Hydraulic properties of polyurethane-bound permeable pavement materials considering unsaturated flow	422-430
Hussain, Atif / Calabria-Holley, Juliana / Lawrence, Mike / Jiang, Yunhong	Hygrothermal and mechanical characterisation of novel hemp shiv based thermal insulation composites	561-568
Tang, Fanlong / Zhu, Shichao / Xu, Guangji / Ma, Tao / Kong, Lingdi / Kong, Lingyun	Influence by chemical constitution of aggregates on demulsification speed of emulsified asphalt based on UV-spectral analysis	102-108
Kim, Yongjae / Hanif, Asad / Usman, Muhammad / Park, Wonjun	Influence of bonded mortar of recycled concrete aggregates on interfacial characteristics – Porosity assessment based on pore segmentation from backscattered electron image analysis	149-163
Nayak, Sumeru / Lyngdoh, Gideon A. / Das, Sumanta	Influence of microencapsulated phase change materials (PCMs) on the chloride ion diffusivity of concretes exposed to Freeze-thaw cycles: Insights from multiscale numerical simulations	317-328
Qin, Ling / Gao, Xiaojian / Chen, Tiefeng	Influence of mineral admixtures on carbonation curing of cement paste	653-662
Karahancer, Sebnem	Investigating the performance of cuprous oxide nano particle modified asphalt binder and hot mix asphalt	698-706
Jongvivatsakul, Pitcha / Janprasit, Karn / Nuaklong, Peem / Pungrasmi, Wiboonluk / Likitlersuang, Suched	Investigation of the crack healing performance in mortar using microbially induced calcium carbonate precipitation (MICP) method	737-744
Li, Jiangwei / Shen, Weiguo / Zhang, Bingliu / Ji, Xiaoli / Chen, Xiao / Ma, Wei / Hu, Jinqiang / Zhou, Mingkai / Li, Yongxin	Investigation on the preparation and performance of clinker-fly ash-gypsum road base course binder	39-48
Du, Yinfei / Liu, Pusheng / Wang, Jiacheng / Wang, Hao / Hu, Shaowei / Tian, Jun / Li, Yingtao	Laboratory investigation of phase change effect of polyethylene glycolon on asphalt binder and mixture performance	1-9
Abed, Mohammed / Nemes, Rita	Long-term durability of self-compacting high-performance concrete produced with waste materials	350-361
Chen, Bo / He, Mingming / Huang, Zishen / Wu, Zhongru	Long-tern field test and numerical simulation of foamed polyurethane insulation on concrete dam in severely cold region	618-634
Xu, Xiaohong / Song, Jia / Li, Yao / Wu, Jianfeng / Liu, Xing / Zhang, Chen	The microstructure and properties of ceramic tiles from solid wastes of Bayer red muds	266-274
Moradian, Masoud / Hu, Qinang / Aboustait, Mohammed / Ley, M. Tyler / Hanan, Jay C. / Xiao, Xianghui / Rose, Volker / Winarski, Robert / Scherer, George W.	Multi-scale observations of structure and chemical composition changes of portland cement systems during hydration	486-499
Sun, Xiaolong / Qin, Xiao / Liu, Binqing / Yu, Zhenxuan / Wang, Xuangcang	New analysis and evaluation method for segregation of inorganic modifier inside asphalt	645-652
Yi, Chaofan / Chen, Zheng / Bindiganavile, Vivek	A non-homogeneous model to predict the service life of concrete subjected to external sulphate attack	254-265
Chow, Anthony / Ramage, Michael H. / Shah, Darshil U.	Optimising ply orientation in structural laminated bamboo	541-548
Duan, Siyu / Liao, Hongqiang / Song, Huiping / Cheng, Fangqin / Yang, Hengquan	Performance improvement to ash-cement blocks by adding ultrafine steel slag collected from a supersonic steam-jet smasher	140-148
Khan, Zafrul H. / Tarefder, Rafiqul A.	A procedure to convert field sensor data for finite element model inputs and its validation	442-455
Chen, Zining / Yi, Junyan / Chen, Zhiguo / Feng, Decheng	Properties of asphalt binder modified by corn stalk fiber	225-235
El-Hassan, Hilal / Kianmehr, Peiman / Zouaoui, Souhail	Properties of pervious concrete incorporating recycled concrete aggregates and slag	164-175
Li, Yaqiang / Li, Yue / Wang, Rui	Quantitative evaluation of elastic modulus of concrete with nanoidentation and homogenization method	295-303
Hussain, Atif / Calabria-Holley, Juliana / Lawrence, Mike / Jiang, Yunhong	Resilient hemp shiv aggregates with engineered hygroscopic properties for the building industry	247-253
Zhang, Shuai / Qiao, Wei-Guo / Chen, Peng-Cheng / Xi, Kai	Rheological and mechanical properties of microfine-cement-based grouts mixed with microfine fly ash, colloidal nanosilica and superplasticizer	10-18
Hashem, Fayza S. / Razek, Taha A. / Mashout, Hani A.	Rubber and plastic wastes as alternative refused fuel in cement industry	275-282
Yang, Yang / Chu, Jian / Xiao, Yang / Liu, Hanlong / Cheng, Liang	Seepage control in sand using bioslurry	342-349
Lin, Feng / Guo, Junchao	Shear transfer of concrete strengthened using bolted steel plates	109-120
Ding, Zhu / Xu, Mu-Rui / Dai, Jian-Guo / Dong, Bing-Qin / Zhang, Ming-Jie / Hong, Shu-Xian / Xing, Feng	Strengthening concrete using phosphate cement-based fiber-reinforced inorganic composites for improved fire resistance	755-764
Jee, Arya Anuj / Pradhan, Bulu	Study on development of empirical relationships between durability parameters of concrete made with different types of binder and exposed to chloride environment	799-817
Coppio, Gustavo J. L. / de Lima, Maryangela Geimba / Lencioni, Julia W. / Cividanes, Luciana S. / Dyer, Paulo P. O. L. / Silva, Silvelene A.	Surface electrical resistivity and compressive strength of concrete with the use of waste foundry sand as aggregate	514-521
Assia, Zebair / Fazia, Fouchal / Abdelmadjid, Hamouine	Sustainability of the stabilized earth blocs under chemicals attack's effects and environmental conditions	787-798
Chandrasiri, Chathurani / Yehdego, Tesfamichael / Peethamparan, Sulapha	Synthesis and characterization of bio-cement from conch shell waste	775-786
Yang, S. / Ukrainczyk, N. / Koenders, E. A. B.	Thermal conductivity of crumb-rubber-modified mortar using an inverse meso-scale heat conduction model	522-530
Reilly, A. / Kinnane, O. / Lesage, F. J. / McGranaghan, G. / Pavía, S. / Walker, R. / O'Hegarty, R. / Robinson, A. J.	The thermal diffusivity of hemplime, and a method of direct measurement	707-715
Ojeda-Farías, O. / Hebraud, P. / Lootens, D. / Liard, M. / Mendoza-Rangel, J. M.	Thixotropy of reactive suspensions: The case of cementitious materials	121-129

Über diese
Datenseite
IssueID
28315
Veröffentlicht am:
04.04.2019
Geändert am:
26.07.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - Juli 2019

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - Juli 2019

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.