Construction and Building Materials - Juni 2019

Erschienen:	Juni 2019

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Zhang, Chuanchuan / Yang, Xinhua	Bilinear elastoplastic constitutive model with polyvinyl alcohol content for strain-hardening cementitious composite	388-394
Huang, Hua / Yuan, Yujie / Zhang, Wei / Gao, Zichen	Bond behavior between lightweight aggregate concrete and normal weight concrete based on splitting-tensile test	306-314
Bhardwaj, Bavita / Kumar, Pardeep	Comparative study of geopolymer and alkali activated slag concrete comprising waste foundry sand	555-565
Hammoudi, Abdelkader / Moussaceb, Karim / Belebchouche, Cherif / Dahmoune, Farid	Comparison of artificial neural network (ANN) and response surface methodology (RSM) prediction in compressive strength of recycled concrete aggregates	425-436
Illangakoon, Gayan Buddhika / Asamoto, Shingo / Nanayakkara, Anura / Nguyen Trong, Lam	Concrete cold joint formation in hot weather conditions	406-415
Huang, Guodong / Yuan, Liang / Ji, Yongsheng / Liu, Benlin / Xu, Zhishan	Cooperative action and compatibility between Portland cement and MSWI bottom ash alkali-activated double gel system materials	445-453
Sakai, Yuya	Correlations between air permeability coefficients and pore structure indicators of cementitious materials	541-547
Bompa, D. V. / Elghazouli, A. Y.	Creep properties of recycled tyre rubber concrete	126-134
Qin, Yuan / Zhang, Xianwei / Chai, Junrui	Damage performance and compressive behavior of early-age green concrete with recycled nylon fiber fabric under an axial load	105-114
Zadshir, Mehdi / Hosseinnezhad, Shahrzad / Fini, Ellie H.	Deagglomeration of oxidized asphaltenes as a measure of true rejuvenation for severely aged asphalt binder	416-424
Zou, Dinghua / Wang, Ke / Li, Kun / Ruan, Wenqiang / Liu, Puxun / Zhu, Yu	Does enhanced hydration have impact on autogenous deformation of internally cued mortar?	548-554
Tadeu, António / Simões, Nuno / Almeida, Ricardo / Manuel, Carlos	Drainage and water storage capacity of insulation cork board applied as a layer on green roofs	52-65
Liu, Zhiyong / Bu, Lingkun / Wang, Zixiao / Hu, Guangqi	Durability and microstructure of steam cured and autoclaved PHC pipe piles	679-689
Alani, Aktham H. / Muhamad Bunnori, N. / Noaman, Ahmed Tareq / Majid, T. A.	Durability performance of a novel ultra-high-performance PET green concrete (UHPPGC)	395-405
He, Yuanjin / Lai, Zhenyu / Yan, Tao / He, Xin / Lu, Zhongyuan / Lv, Shuzhen / Li, Feng / Fan, XiaoLing / Zhang, Haibin	Effect of Cd2+ on early hydration process of magnesium phosphate cement and its leaching toxicity properties	32-40
Kan, Li-li / Shi, Ruo-xin / Zhu, Jin	Effect of fineness and calcium content of fly ash on the mechanical properties of Engineered Cementitious Composites (ECC)	476-484
Sinno, Noura / Shehata, Medhat H.	Effect of sample geometry and aggregate type on expansion due to alkali-silica reaction	738-747
Zdeb, Tomasz	Effect of vacuum mixing and curing conditions on mechanical properties and porosity of reactive powder concretes	326-339
Han, Juhong / Zhao, Mengmeng / Chen, Jingyu / Lan, Xiaofang	Effects of steel fiber length and coarse aggregate maximum size on mechanical properties of steel fiber reinforced concrete	577-591
Yao, Jinwei / Chen, Jiankang / Lu, Chunsheng	Entropy evolution during crack propagation in concrete under sulfate attack	492-498
Mohseni, Ehsan / Kazemi, Mahyar Jafar / Koushkbaghi, Mahdi / Zehtab, Behnam / Behforouz, Babak	Evaluation of mechanical and durability properties of fiber-reinforced lightweight geopolymer composites based on rice husk ash and nano-alumina	532-540
Su, Buyun / Zhou, Zhiwei / Li, Zhiqiang / Wang, Zhihua / Shu, Xuefeng	Experimental investigation on the mechanical behavior of foamed concrete under uniaxial and triaxial loading	41-51
Ivashenko, Yulij / Ferder, Anna	Experimental studies on the impacts of strain and loading modes on the formation of concrete "stress-strain" relations	234-239
Wang, Rong / Gao, Peiwei / Tian, Minghao / Dai, Yuchen	Experimental study on mechanical and waterproof performance of lightweight foamed concrete mixed with crumb rubber	655-664
Yang, Yong / Feng, Shiqiang / Xue, Yicong / Yu, Yunlong / Wang, Hanying / Chen, Yang	Experimental study on shear behavior of fire-damaged reinforced concrete T-beams retrofitted with prestressed steel straps	644-654
ElMessalami, Nouran / El Refai, Ahmed / Abed, Farid	Fiber-reinforced polymers bars for compression reinforcement: A promising alternative to steel bars	725-737
Chang, Jun / Xiong, Cang / Zhang, Yangyang / Wang, Dan	Foaming characteristics and microstructure of aerated steel slag block prepared by accelerated carbonation	222-233
Tao, Jin / Wang, Xiaohu / Wang, Zhendi / Zeng, Qiang	Graphene nanoplatelets as an effective additive to tune the microstructures and piezoresistive properties of cement-based composites	665-678
Wu, Mingyue / Hu, Xiangming / Zhang, Qian / Xue, Di / Zhao, Yanyun	Growth environment optimization for inducing bacterial mineralization and its application in concrete healing	631-643
Yoo, Doo-Yeol / Kim, Min-Jae	High energy absorbent ultra-high-performance concrete with hybrid steel and polyethylene fibers	354-363
Hu, Menghan / Han, Qiang / Xu, Kun / Du, Xiuli	Impact of corrosion on cyclic behaviors of ultra-high-strength reinforcing bars	606-618
Agrawal, U. S. / Wanjari, S. P. / Naresh, D. N.	Impact of replacement of natural river sand with geopolymer fly ash sand on hardened properties of concrete	499-507
Motahari Karein, S. Mahmoud / Balapour, Mohammad / Karakouzian, Moses	Improving the hardened and transport properties of perlite incorporated mixture through different solutions: Surface area increase, nanosilica incorporation or both	187-194
D'Arenzo, Giuseppe / Casagrande, Daniele / Reynolds, Thomas / Fossetti, Marinella	In-plane elastic flexibility of cross laminated timber floor diaphragms	709-724
Yu, Fan / Sun, Daquan / Wang, Jue / Hu, Minjun	Influence of aggregate size on compressive strength of pervious concrete	463-475
Vilela Rocha, Vanessa / Ludvig, Peter / Constancio Trindade, Ana Carolina / de Andrade Silva, Flávio	The influence of carbon nanotubes on the fracture energy, flexural and tensile behavior of cement based composites	1-8
Yang, Shuqing / Ling, Tung-Chai / Cui, Hongzhi / Poon, Chi Sun	Influence of particle size of glass aggregates on the high temperature properties of dry-mix concrete blocks	522-531
Otero, J. / Starinieri, V. / Charola, A. E.	Influence of substrate pore structure and nanolime particle size on the effectiveness of nanolime treatments	701-708
Nguyen, Thuy Bich Thi / Chatchawan, Rachot / Saengsoy, Warangkana / Tangtermsirikul, Somnuk / Sugiyama, Takafumi	Influences of different types of fly ash and confinement on performances of expansive mortars and concretes	176-186
Gao, Hongyu / Liao, Hongqiang / Yao, Xingliang / Cheng, Fangqin	Insights into the reinforcing mechanism for CO2 atmosphere in the application process of steel slag ultra-fine powder	437-444
Lal, Dhirajkumar / Chatterjee, Aniruddha / Dwivedi, Arunkumar	Investigation of properties of cement mortar incorporating pond ash – An environmental sustainable material	20-31
Jiang, Jiwang / Ni, Fujian / Dong, Qiao / Yao, Linyi / Ma, Xiang	Investigation of the internal structure change of two-layer asphalt mixtures during the wheel tracking test based on 2D image analysis	66-76
Shi, Gang / Gao, Yang / Wang, Xun	Material properties and partial factors for resistance of low yield point steels in China	295-305
Kazemian, F. / Rooholamini, H. / Hassani, A.	Mechanical and fracture properties of concrete containing treated and untreated recycled concrete aggregates	690-700
Zhu, Yu / Zhang, Hui / Zhang, Zhaocai / Dong, Biqin / Liao, Jianguo	Monitoring the cracking behavior of engineered cementitious composites (ECC) and plain mortar by electrochemical impedance measurement	195-201
Xu, Mingfeng / Bao, Yi / Wu, Kai / Shi, Huisheng / Guo, Xiaolu / Li, Victor C.	Multiscale investigation of tensile properties of a TiO2-doped Engineered Cementitious Composite	485-491
di Prisco, Marco / Scola, Marcello / Zani, Giulio	On site assessment of Azzone Visconti bridge in Lecco: Limits and reliability of current techniques	269-282
Jaskulski, Roman / Glinicki, Michał A. / Ranachowski, Zbigniew / Kubissa, Wojciech	Organic phosphorus compounds as heat release regulators in hardening shielding concrete	167-175
Vamegh, Mostafa / Ameri, Mahmoud / Chavoshian Naeni, Seyed Farhad	Performance evaluation of fatigue resistance of asphalt mixtures modified by SBR/PP polymer blends and SBS	202-214
Luo, Dong / Khater, Ahmed / Yue, Yanchao / Abdelsalam, Moustafa / Zhang, Zengping / Li, Yuanyuan / Li, Junnan / Iseley, David Thomas	The performance of asphalt mixtures modified with lignin fiber and glass fiber: A review	377-387
Boubekeur, Toufik / Boulekbache, Bensaid / Aoudjane, Kheireddine / Ezziane, Karim / Kadri, El-Hadj	Prediction of the durability performance of ternary cement containing limestone powder and ground granulated blast furnace slag	215-221
Guo, Qi / Zhang, Ruyi / Luo, Qirui / Wu, Han / Sun, Huping / Ye, Yi	Prediction on damage evolution of recycled crumb rubber concrete using quantitative cloud imagine correlation	340-353
Lang, Lei / Duan, Haijuan / Chen, Bing	Properties of pervious concrete made from steel slag and magnesium phosphate cement	95-104
Joshi, Sumit / Goyal, Shweta / Mukherjee, Abhijit / Sudhakara Reddy, M.	Protection of concrete structures under sulfate environments by using calcifying bacteria	156-166
Zhang, Yurong / Luo, Wei / Wang, Jingjing / Wang, Yuanfeng / Xu, Yaqin / Xiao, Jianzhuang	A review of life cycle assessment of recycled aggregate concrete	115-125
Wahab, Abdul / Aziz, Md Maniruzzaman A. / Sam, Abdul Rahman Mohd. / You, Kok Yeow / Bhatti, Abdul Qadir / Kassim, Khairul Anuar	Review on microwave nondestructive testing techniques and its applications in concrete technology	135-146
Franzoni, Elisa / Santandrea, Mattia / Gentilini, Cristina / Fregni, Alberto / Carloni, Christian	The role of mortar matrix in the bond behavior and salt crystallization resistance of FRCM applied to masonry	592-605
Jumaa, Ghazi Bahroz / Yousif, Ali Ramadhan	Size effect on the shear failure of high-strength concrete beams reinforced with basalt FRP bars and stirrups	77-94
Al-Saadi, Nihad Tareq Khshain / Mohammed, Alyaa / Al-Mahaidi, Riadh / Sanjayan, Jay	A state-of-the-art review: Near-surface mounted FRP composites for reinforced concrete structures	748-769
Pacheco, João Nuno / de Brito, Jorge / Chastre, Carlos / Evangelista, Luís	Statistical analysis of Portuguese ready-mixed concrete production	283-294
Li, Jin / Xiao, Feipeng / Amirkhanian, Serji N.	Storage, fatigue and low temperature characteristics of plasma treated rubberized binders	454-462
Hosseini, Ardalan / Ghafoori, Elyas / Al-Mahaidi, Riadh / Zhao, Xiao-Ling / Motavalli, Masoud	Strengthening of a 19th-century roadway metallic bridge using nonprestressed bonded and prestressed unbonded CFRP plates	240-259
Hossain, S. K. S. / Ranjan, Vikash / Pyare, Ram / Roy, P. K.	Study the effect of physico-mechanical characteristics of ceramic tiles after addition of river silts and wollastonite derived from wastes	315-325
Singh, Surender / Ransinchung R. N., G. D. / Monu, Kumari	Sustainable lean concrete mixes containing wastes originating from roads and industries	619-630
Li, Long / Zhan, Bao Jian / Lu, Jianxin / Poon, Chi Sun	Systematic evaluation of the effect of replacing river sand by different particle size ranges of fine recycled concrete aggregates (FRCA) in cement mortars	147-155
Xu, Gaowei / Komar, Andrew / Boyd, Andrew J.	Tensile strength of plain concrete under sustained load by PT machine	260-268
Shen, Dejian / Yang, Qun / Huang, Congbin / Cui, Zhenghua / Zhang, Jinyang	Tests on seismic performance of corroded reinforced concrete shear walls repaired with basalt fiber-reinforced polymers	508-521
Zhang, Xiang / Wang, Hainian / Mohd Hasan, Mohd Rosli / Gao, Junfeng / Irfan, Muhammad	Traffic open time prediction of fog seal with sand using image processing technology	9-19
Arabi, Nourredine / Meftah, Houria / Amara, Hanane / Kebaïli, Oussama / Berredjem, Layachi	Valorization of recycled materials in development of self-compacting concrete: Mixing recycled concrete aggregates – Windshield waste glass aggregates	364-376
Wang, Yanru / Cao, Yubin / Zhang, Peng / Ma, Yuwei / Zhao, Tiejun / Wang, Hao / Zhang, Zuhua	Water absorption and chloride diffusivity of concrete under the coupling effect of uniaxial compressive load and freeze–thaw cycles	566-576

Über diese
Datenseite
IssueID
28280
Veröffentlicht am:
18.03.2019
Geändert am:
26.07.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - Juni 2019

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - Juni 2019

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.