Construction and Building Materials - Mai 2019

Erschienen:	Mai 2019

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Li, Xiaolong / Wang, Lianbang / Hao, Meimei / Zhong, Yanhui / Zhang, Bei	An analytical solution for the radial flow of variable density grout in rock fractures	630-640
Xiao, Zhao-Yun / Xu, Wei	Assessment of strength development in cemented coastal silt admixed granite powder	470-482
Fontes, Wanna C. / Franco de Carvalho, José M. / Andrade, Luana C. R. / Segadães, Ana M. / Peixoto, Ricardo A. F.	Assessment of the use potential of iron ore tailings in the manufacture of ceramic tiles: From tailings-dams to "brown porcelain"	111-121
Ling, Hao / Qian, Chunxiang / Kang, Wence / Liang, Chengyao / Chen, Huaicheng	Combination of Support Vector Machine and K-Fold cross validation to predict compressive strength of concrete in marine environment	355-363
Tao, Jiayin / Wei, Xiaosheng / Luo, Yuxuan	Comparison of non-contact autogenous shrinkage measurements and the stress ratio of capillary stress to compressive strength	226-235
Tan, Hongbo / Nie, Kangjun / He, Xingyang / Deng, Xiufeng / Zhang, Xun / Su, Ying / Yang, Jin	Compressive strength and hydration of high-volume wet-grinded coal fly ash cementitious materials	248-260
Balestra, Carlos Eduardo Tino / Reichert, Thiago Alessi / Savaris, Gustavo	Contribution for durability studies based on chloride profiles analysis of real marine structures in different marine aggressive zones	140-150
Andreev, K. / Shetty, N. / de Smedt, M. / Yin, Y. / Verstrynge, E.	Correlation of damage after first cycle with overall fatigue resistance of refractory castable concrete	531-539
Dexing, Li / Enyuan, Wang / Xiangguo, Kong / Haishan, Jia / Dongming, Wang / Muhammad, Ali	Damage precursor of construction rocks under uniaxial cyclic loading tests analyzed by acoustic emission	169-178
Do, Tan Manh / Kang, Gyeong-o / Kim, Young-Sang	Development of a new cementless binder for controlled low strength material (CLSM) using entirely by-products	576-589
Li, Xiaoguang / Liu, Jinjin / Qin, Jinyi / Liu, Yunxiao / Qu, Yaan / Zhang, Rui	Dissolution behavior of a novel composite fiber made from blast furnace slag	442-448
Li, Chen Yang / Chen, Shu Jian / Li, Wen Gui / Li, Xiang Yu / Ruan, Dong / Duan, Wen Hui	Dynamic increased reinforcing effect of graphene oxide on cementitious nanocomposite	694-702
Shafiei Dastgerdi, Aref / Peterman, Robert J. / Riding, Kyle / Beck, B. Terry	Effect of concrete mixture components, proportioning, and compressive strength on fracture parameters	179-192
Sun, Jianwei / Feng, Jingjing / Chen, Zhonghui	Effect of ferronickel slag as fine aggregate on properties of concrete	201-209
Elaqra, Hossam A. / Al-Afghany, Mostafa J. / Abo-Hasseira, Aony B. / Elmasry, Ibrahim H. / Tabasi, Ahmed M. / Alwan, Mohammed D.	Effect of immersion time of glass powder on mechanical properties of concrete contained glass powder as cement replacement	674-682
Monu, Kumari / Ransinchung R. N., G. D. / Singh, Surender	Effect of long-term ageing on properties of RAP inclusive WMA mixes	483-493
Tan, Hongbo / Nie, Kangjun / He, Xingyang / Guo, Yulin / Zhang, Xun / Deng, Xiufeng / Su, Ying / Yang, Jin	Effect of organic alkali on compressive strength and hydration of wet-grinded granulated blast-furnace slag containing Portland cement	10-18
Ardoğa, M. Kemal / Erdoğan, Sinan T. / Tokyay, Mustafa	Effect of particle size on early heat evolution of interground natural pozzolan blended cements	210-218
Xu, Lihua / Wu, Fanghong / Chi, Yin / Cheng, Peng / Zeng, Yanqin / Chen, Qian	Effects of coarse aggregate and steel fibre contents on mechanical properties of high performance concrete	97-110
Mohammed, Bashar S. / Achara, Bitrus Emmanuel / Liew, Mohd Shahir / Alaloul, W. S. / Khed, Veerendrakumar C.	Effects of elevated temperature on the tensile properties of NS-modified self-consolidating engineered cementitious composites and property optimization using response surface methodology (RSM)	449-469
Ling, Meng / Chen, Yu / Hu, Sheng / Luo, Xue / Lytton, Robert L.	Enhanced model for thermally induced transverse cracking of asphalt pavements	130-139
Wu, Yongchang / Chen, Huaxin / Xu, Qinwu / Zhang, Zhen / Jiao, Fangfang	Evaluation of experimental testing methods for the design of permeable friction course mixtures	385-396
Guo, Tianxiong / Weng, Xingzhong	Evaluation of the freeze-thaw durability of surface-treated airport pavement concrete under adverse conditions	519-530
Le, Tri Ho Minh / Park, Dae-Wook / Seo, Jung-Woo	Evaluation on the mechanical properties of cement asphalt mortar with quick hardening admixture for railway maintenance	375-384
Jeleč, Mario / Danielsson, Henrik / Rajčić, Vlatka / Serrano, Erik	Experimental and numerical investigations of cross-laminated timber elements at in-plane beam loading conditions	329-346
Li, Zheng / Pasternak, Hartmut	Experimental and numerical investigations of statistical size effect in S235JR steel structural elements	665-673
Guo, Qinglin / Li, Guangyao / Gao, Ying / Wang, Keyi / Dong, Zizhen / Liu, Fuchun / Zhu, Han	Experimental investigation on bonding property of asphalt-aggregate interface under the actions of salt immersion and freeze-thaw cycles	590-599
Yoo, Doo-Yeol / Kim, Soonho / Kim, Jae-Jin / Chun, Booki	An experimental study on pullout and tensile behavior of ultra-high-performance concrete reinforced with various steel fibers	46-61
Zhao, Min / Jia, Yinghui / Yuan, Linjuan / Qiu, Jing / Xie, Chao	Experimental study on the vegetation characteristics of biochar-modified vegetation concrete	321-328
Zheng, Mulian / Li, Peng / Yang, Jiangang / Li, Hongyin / Qiu, Yangyang / Zhang, Zhengliang	Fatigue character comparison between high modulus asphalt concrete and matrix asphalt concrete	655-664
Magdaleno López, C. / Pérez Bueno, J. J. / Mendoza López, M. L. / Reyes Araiza, J. L. / Manzano-Ramírez, A.	Fly ash lightweight material of the cellular concrete type using sol-gel and thermal treatment	512-518
Qureshi, Tanvir S. / Panesar, Daman K.	Impact of graphene oxide and highly reduced graphene oxide on cement based composites	71-83
Xu, Cheng / Zhang, Zhengqi / Zhao, Fuqiang / Liu, Feifei / Wang, Jiarong	Improving the performance of RET modified asphalt with the addition of polyurethane prepolymer (PUP)	560-575
Kalpokaitė-Dičkuvienė, Regina / Baltušnikas, Arūnas / Levinskas, Rimantas / Čėsnienė, Jūratė	Incinerator residual ash – Metakaolin blended cements: Effect on cement hydration and properties	297-306
Zhuge, Ping / Jie, Zhi-yu / Zhang, Zi-Hua / Ding, Yong / Hou, Su-wei	The influence of load transfer medium creep on the load-carrying capacity of the bond-type anchors of CFRP tendons	236-247
Lv, Quan / Huang, Weidong / Sadek, Husam / Xiao, Feipeng / Yan, Chuanqi	Investigation of the rutting performance of various modified asphalt mixtures using the Hamburg Wheel-Tracking Device test and Multiple Stress Creep Recovery test	62-70
Yao, Kai / Wang, Wei / Li, Na / Zhang, Chen / Wang, Linxia	Investigation on strength and microstructure characteristics of nano-MgO admixed with cemented soft soil	160-168
Ingaglio, Joseph / Fox, John / Naito, Clay J. / Bocchini, Paolo	Material characteristics of binder jet 3D printed hydrated CSA cement with the addition of fine aggregates	494-503
Dong, Zhiqiang / Wu, Gang / Zhu, Hong	Mechanical properties of seawater sea-sand concrete reinforced with discrete BFRP-Needles	432-441
Zhang, Bingbing / Fan, Zhiqiang / Hu, Shuangqi / Shen, Zhaowu / Ma, Honghao	Mechanical response of the fly ash cenospheres/polyurethane syntactic foams fabricated through infiltration process	552-559
Nguyen, Ngoc-Vinh / Pham, Thai-Hoan / Kim, Seung-Eock	Microstructure and strain rate sensitivity behavior of SM490 structural steel weld zone investigated using indentation	410-418
Madej, Dominika / Kruk, Andrzej	Monitoring hydration of Sr-doped calcium zirconium aluminate (Ca,Sr)7ZrAl6O18 cement via electrochemical impedance spectroscopy (EIS) and supported techniques	307-320
Franco de Carvalho, José Maria / Varela de Melo, Tainá / Fontes, Wanna Carvalho / Batista, Júnio Oliveira dos Santos / Brigolini, Guilherme Jorge / Fiorotti Peixoto, Ricardo André	More eco-efficient concrete: An approach on optimization in the production and use of waste-based supplementary cementing materials	397-409
Hisseine, Ousmane A. / Wilson, William / Sorelli, Luca / Tolnai, Balázs / Tagnit-Hamou, Arezki	Nanocellulose for improved concrete performance: A macro-to-micro investigation for disclosing the effects of cellulose filaments on strength of cement systems	84-96
Luo, Yaofei / Zhang, Ke / Xie, Xiangbing / Yao, Xiaoguang	Performance evaluation and material optimization of Micro-surfacing based on cracking and rutting resistance	193-200
Wang, R. / Wei, S. Q. / Li, Z. / Xiao, Y.	Performance of connection system used in lightweight glubam shear wall	419-431
Shin, S. / Goh, G. / Lee, C.	Predictions of compressive strength of GPC blended with GGBFS developed at varying temperatures	1-9
Ozawa, Mitsuo / Parajuli, Sirjana Subedi / Uchida, Yuichi / Zhou, Bo	Preventive effects of polypropylene and jute fibers on spalling of UHPC at high temperatures in combination with waste porous ceramic fine aggregate as an internal curing material	219-225
Noël, Martin	Probabilistic fatigue life modelling of FRP composites for construction	279-286
Xie, Youjun / Wang, Xu / Long, Guangcheng / Ma, Cong	Quantitative analysis of the influence of subfreezing temperature on the mechanical properties of steam-cured concrete	504-511
Ding, Hui / Chen, Jiankang	Research on the resistivity attenuation law of cementitious conductive composites induced by stress relaxation	347-354
Zhang, Kun / Huchet, Florian / Hobbs, Andrew	A review of thermal processes in the production and their influences on performance of asphalt mixtures with reclaimed asphalt pavement (RAP)	609-619
Hedayatinia, Fariborz / Delnavaz, Mohammad / Emamzadeh, Seyed Shahab	Rheological properties, compressive strength and life cycle assessment of self-compacting concrete containing natural pumice pozzolan	122-129
Casacci, Susanna / Gentilini, Cristina / Di Tommaso, Angelo / Oliveira, Daniel V.	Shear strengthening of masonry wallettes resorting to structural repointing and FRCM composites	19-34
Tsangouri, E. / Remy, O. / Boulpaep, F. / Verbruggen, S. / Livitsanos, G. / Aggelis, D. G.	Structural health assessment of prefabricated concrete elements using Acoustic Emission: Towards an optimized damage sensing tool	261-269
Liu, Kai / Liang, Wei / Ren, Fengmei / Ren, Jingge / Wang, Fang / Ding, Heng	The study on compressive mechanical properties of rigid polyurethane grout materials with different densities	270-278
Tang, Jinhui / Yu, Cheng / Wang, Rui / Liu, Jiaping	Sulfonation of graphene and its effects on tricalcium silicate hydration	600-608
Starý, Michal / Novotný, František / Horák, Marcel / Stará, Marie / Hotař, Vlastimil / Matúšek, Ondřej	Summary of the properties and benefits of glass mechanically frosted with an abrasive brush	364-374
Koshy, Nevin / Dondrob, Kunga / Hu, Liming / Wen, Qingbo / Meegoda, Jay N.	Synthesis and characterization of geopolymers derived from coal gangue, fly ash and red mud	287-296
Ashkani, M. / Bouhendi, H. / Kabiri, K. / Rostami, M. R.	Synthesis of poly (2-acrylamido-2-methyl propane sulfonic acid) with high water absorbency and absorption under load (AUL) as concrete grade superabsorbent and its performance	540-551
Luo, Yi / Jiang, Yonggang / Feng, Junzong / Feng, Jian	Synthesis of white cement bonded porous fumed silica-based composite for thermal insulation with low thermal conductivity via a facile cast-in-place approach	620-629
Wang, He / Buttlar, William G.	Three-dimensional micromechanical pavement model development for the study of block cracking	35-45
Wei, Luo / Xiao-Guang, Jin / Zhong-Ya, Zhang	Triaxial test on concrete material containing accelerators under physical sulphate attack	641-654
Luo, Yaoling / Wang, Chong / Fang, Zheng / Xiao, Lujun / Zeng, Qianpu	The TSA degradation process of cement-based materials in the electrical field environment	703-716
Cui, Chuanjie / Chen, Airong / Pan, Zichao / Ma, Rujin	Two-dimensional numerical model and fast estimation method for calculating crevice corrosion of cross-sea bridges	683-693
Jiang, Zhenliang / Easa, Said M. / Hu, Changbin / Zheng, Xiaoyan	Understanding damping performance and mechanism of crumb rubber and styrene-butadiene-styrene compound modified asphalts	151-159

Über diese
Datenseite
IssueID
27553
Veröffentlicht am:
14.02.2019
Geändert am:
26.07.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - Mai 2019

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - Mai 2019

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.