Construction and Building Materials - April 2019

Erschienen:	April 2019

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Tijani, I. A. / Wu, Yu-Fei / Lim, C. W.	Aggregate size effects and general static loading response on mechanical behavior of passively confined concrete	61-72
Bassani, M. / Tefa, L. / Russo, A. / Palmero, P.	Alkali-activation of recycled construction and demolition waste aggregate with no added binder	398-413
Kánnár, A. / Karácsonyi, Zs. / Andor, K. / Csóka, L.	Analysis of glued-laminated timber structure during five years of outdoor operation	31-38
Poyet, Stéphane / Bary, Benoît / Coppens, Erik	Analysis of water transport in unsaturated conditions: Comparison between labcrete and fieldcrete	443-455
Fiorelli, Juliano / Bueno, Stephen Bonilla / Cabral, Matheus Roberto	Assessment of multilayer particleboards produced with green coconut and sugarcane bagasse fibers	1-9
Ma, Wenbo / Huang, Tianbao / Guo, Shuaicheng / Yang, Caiqian / Ding, Yanhuai / Hu, Cong	Atomic force microscope study of the aging/rejuvenating effect on asphalt morphology and adhesion performance	642-655
Abu-Sena, Anwar Badawy Badawy / Said, Mohamed / Zaki, M. A. / Dokmak, Mohamed	Behavior of hollow steel sections strengthened with CFRP	306-320
Zhang, Qiang / Li, Yaozhuang / Xu, Lei / Lun, Peiyuan	Bond strength and corrosion behavior of rebar embedded in straw ash concrete	21-30
Tang, Naipeng / Lv, Quan / Huang, Weidong / Lin, Peng / Yan, Chuanqi	Chemical and rheological evaluation of aging characteristics of terminal blend rubberized asphalt binder	87-96
Pošta, Jan / Hataj, Martin / Jára, Robert / Ptáček, Petr / Kuklík, Petr	Comparison of the use of angle brackets in timber joints with eurocode 5	611-621
Rossini, Marco / Nanni, Antonio	Composite strands for prestressed concrete: State-of-the-practice and experimental investigation into mild prestressing with GFRP	486-498
Abid, Muhammad / Hou, Xiaomeng / Zheng, Wenzhong / Hussain, Raja Rizwan / Cao, Shaojun / Lv, Zhihao	Creep behavior of steel fiber reinforced reactive powder concrete at high temperature	321-331
Yang, Xinxiang / Kuru, Ergun / Gingras, Murray / Iremonger, Simon	CT-CFD integrated investigation into porosity and permeability of neat early-age well cement at downhole condition	73-86
Guo, Shenglai / Zhang, Yaozhong / Wang, Kai / Bu, Yuhuan / Wang, Chengwen / Ma, Cong / Liu, Huajie	Delaying the hydration of Portland cement by sodium silicate: Setting time and retarding mechanism	543-548
Gong, Linxian / Nie, Lei / Xu, Yan / Wang, Hong / Zhang, Tao / Du, Chao / Wang, Yuzheng	Discrete element modelling of the mechanical behaviour of a sand-rubber mixture containing large rubber particles	574-585
Hallonet, A. / Ferrier, E. / Michel, L. / Benmokrane, Brahim	Durability and tensile characterization of wet lay-up flax/epoxy composites used for external strengthening of RC structures	679-698
Lazorenko, Georgy / Kasprzhitskii, Anton / Khakiev, Zelimkhan / Yavna, Victor	Dynamic behavior and stability of soil foundation in heavy haul railway tracks: A review	111-136
Tan, Hongbo / Li, Maogao / Ren, Jun / Deng, Xiufeng / Zhang, Xun / Nie, Kangjun / Zhang, Junjie / Yu, Zhuqing	Effect of aluminum sulfate on the hydration of tricalcium silicate	414-424
Dousti, Mohammad Reza / Boluk, Yaman / Bindiganavile, Vivek	The effect of cellulose nanocrystal (CNC) particles on the porosity and strength development in oil well cement paste	456-462
Hamed, Nehal / El-Feky, M. S. / Kohail, Mohamed / Nasr, El-Sayed A. R.	Effect of nano-clay de-agglomeration on mechanical properties of concrete	245-256
Singh, Bhupendra / Kumar, Praveen	Effect of polymer modification on the ageing properties of asphalt binders: Chemical and morphological investigation	633-641
Cao, Yun / Liu, Rong / Xu, Yifan / Ye, Fei / Xu, Rui / Han, Yan	Effect of SiO2, Al2O3 and CaO on characteristics of lightweight aggregates produced from MSWI bottom ash sludge (MSWI-BAS)	368-376
Nerella, Venkatesh Naidu / Hempel, Simone / Mechtcherine, Viktor	Effects of layer-interface properties on mechanical performance of concrete elements produced by extrusion-based 3D-printing	586-601
Arabani, Mahyar / Shabani, Amir	Evaluation of the ceramic fiber modified asphalt binder	377-386
de Silva, Donatella / Bilotta, Antonio / Nigro, Emidio	Experimental investigation on steel elements protected with intumescent coating	232-244
Chen, Xudong / Liu, Zhiheng / Guo, Shengshan / Huang, Yebo / Xu, Wenlei	Experimental study on fatigue properties of normal and rubberized self-compacting concrete under bending	10-20
Teixeira, R. S. / Santos, S. F. / Christoforo, A. L. / Savastano, H. / Lahr, F. A. R.	Extrudability of cement-based composites reinforced with curauá (Ananas erectifolius) or polypropylene fibers	97-110
Fogue-Djombou, Yannick Igor / Corn, Stéphane / Clerc, Laurent / Salze, David / Garcia-Diaz, Eric	Freeze-thaw resistance of limestone roofing tiles assessed through impulse vibration monitoring and finite element modeling in relation to their microstructure	656-667
Koushkbaghi, Mahdi / Alipour, Pedram / Tahmouresi, Behzad / Mohseni, Ehsan / Saradar, Ashkan / Sarker, Prabir Kumar	Influence of different monomer ratios and recycled concrete aggregate on mechanical properties and durability of geopolymer concretes	519-528
Bairgi, Biswajit K. / Mannan, Umme A. / Tarefder, Rafiqul A.	Influence of foaming on tribological and rheological characteristics of foamed asphalt	186-195
Wang, Qi / Yu, Changjuan / Yang, Jianming / Chong, Linlin / Xu, Xuancheng / Wu, Qisheng	Influence of nickel slag powders on properties of magnesium potassium phosphate cement paste	668-678
Kerienė, Jadvyga / Antonovič, Valentin / Stonys, Rimvydas / Boris, Renata	The influence of the ageing of calcium aluminate cement on the properties of mortar	387-397
Salgado Lopes, Márcia Maria / de Cássia Silva Sant'Ana Alvarenga, Rita / Pedroti, Leonardo Gonçalves / Ribeiro, José Carlos Lopes / Fiorini de Carvalho, Anôr / de Paula Cardoso, Fernando / Cardoso Mendes, Beatryz	Influence of the incorporation of granite waste on the hiding power and abrasion resistance of soil pigment-based paints	463-474
Wu, Pangang / Xu, Longjun / Luo, Jianlin / Zhang, Xueyi / Bian, Wenfeng	Influences of long-term immersion of water and alkaline solution on the fatigue performances of unidirectional pultruded CFRP plate	344-356
Xiaoyuan, Wang / Pengju, Han / Xiaohong, Bai / Xiangyu, Li	Influences of slag on properties of lightweight cement-treated soils subjected to sulfate corrosion	511-518
Boukhatem, Bakhta / Rebouh, Redouane / Zidol, Ablam / Chekired, Mohamed / Tagnit-Hamou, Arezki	An intelligent hybrid system for predicting the tortuosity of the pore system of fly ash concrete	274-284
Bahranifard, Zahra / Farshchi Tabrizi, Farshad / Vosoughi, Ali Reza	An investigation on the effect of styrene-butyl acrylate copolymer latex to improve the properties of polymer modified concrete	175-185
Sidiq, Amir / Gravina, Rebecca / Giustozzi, Filippo	Is concrete healing really efficient? A review	257-273
Chavez, Francisco / Marcobal, Jose / Gallego, Juan	Laboratory evaluation of the mechanical properties of asphalt mixtures with rubber incorporated by the wet, dry, and semi-wet process	164-174
Zhang, Yao / Luo, Xue / Onifade, Ibrahim / Huang, Xiaoming / Lytton, Robert L. / Birgisson, Björn	Mechanical evaluation of aggregate gradation to characterize load carrying capacity and rutting resistance of asphalt mixtures	499-510
Mojsilović, Nebojša / Petrović, Miloš / Stojadinović, Božidar	Multi-layer masonry bed joint subjected to shear: Analytical modelling	602-610
Xing, Chengwei / Liu, Liping / Wang, Ming	A new preparation method and imaging parameters of asphalt binder samples for atomic force microscopy	622-632
Amiri Rad, Ehsan / Fallahi, Elmira	Optimizing the insulation thickness of external wall by a novel 3E (energy, environmental, economic) method	196-212
Chen, Qian / Wang, Chaohui / Wen, Penghui / Sun, Xiaolong / Guo, Tengteng	Performance evaluation of tourmaline modified asphalt mixture based on grey target decision method	137-147
Kareem, Abbaas I. / Nikraz, Hamid / Asadi, Hossein	Performance of hot-mix asphalt produced with double coated recycled concrete aggregates	425-433
Guler, Soner / Yavuz, Demet	Post-cracking behavior of hybrid fiber-reinforced concrete-filled steel tube beams	285-305
Li, Pengwei / Wu, Huijun / Liu, Yanchen / Yang, Jianming / Fang, Zhaosong / Lin, Borong	Preparation and optimization of ultra-light and thermal insulative aerogel foam concrete	529-542
Li, Tian / Wang, Zhi / Zhou, Taotao / He, Yunfei / Huang, Fangmei	Preparation and properties of magnesium phosphate cement foam concrete with H2O2 as foaming agent	566-573
Wang, Sheng / Jian, Liming / Shu, Zhihong / Wang, Jingfei / Hua, Xu / Chen, Liyi	Preparation, properties and hydration process of low temperature nano-composite cement slurry	434-442
Tajra, Feras / Abd Elrahman, Mohamed / Lehmann, Christian / Stephan, Dietmar	Properties of lightweight concrete made with core-shell structured lightweight aggregate	39-51
Gomes, Maria Idália / Faria, Paulina / Gonçalves, Teresa Diaz	Rammed earth walls repair by earth-based mortars: The adequacy to assess effectiveness	213-231
Ballesteros, Julian Eduardo Mejia / Mármol, Gonzalo / Filomeno, Rafael / Rodier, Loic / Savastano, Holmer / Fiorelli, Juliano	Synergic effect of fiber and matrix treatments for vegetable fiber reinforced cement of improved performance	52-60
Guruprasad, Y. K. / Ramaswamy, Ananth	Thermal insulation of concrete and the repair material CFRP exposed to high temperature and different time intervals	549-565
Zhang, Yun / Zhou, Xiaoyun / Zhao, Jing / Zhuang, Huaxia / Gao, Yanhong / Zhang, Yurong	Time dependency and similarity of decay process of chloride diffusion in concrete under simulated marine tidal environment	332-343
Zhang, Junzhi / Zhang, Pinjun / Wu, Jia / Feng, Xiuxian / Bian, Fan / Zhang, Yurong	Time-dependent correlation between micro-structural parameters and gas permeability of concrete in a natural tidal environment	475-485
Alabdulhady, Meyyada Y. / Sneed, Lesley H.	Torsional strengthening of reinforced concrete beams with externally bonded composites: A state of the art review	148-163
Zhang, Tongsheng / Tian, Wenli / Guo, Yiqun / Bogush, Anna / Khayrulina, Elena / Wei, Jiangxiong / Yu, Qijun	The volumetric stability, chloride binding capacity and stability of the Portland cement-GBFS pastes: An approach from the viewpoint of hydration products	357-367

Über diese
Datenseite
IssueID
27549
Veröffentlicht am:
14.02.2019
Geändert am:
26.07.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - April 2019

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - April 2019

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.