Construction and Building Materials - Oktober 2017

Erschienen:	Oktober 2017

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Zhang, Ke / Zhang, Zhengqi / Luo, Yaofei / Huang, Siyuan	Accurate detection and evaluation method for aggregate distribution uniformity of asphalt pavement	715-730
Yoo, Pyeong Jun / Sik Eom, Byung / Soo Park, Ki / Hun Kim, Do	Aggregate pre-coating approach using rubber- and silane-coupled thermoset polymer and emulsion for warm-mix asphalt mixtures	708-714
Wang, Jiayu / Xiao, Feipeng / Chen, Zheng / Li, Xinghai / Amirkhanian, Serji	Application of tack coat in pavement engineering	856-871
Vaitkus, Audrius / Andriejauskas, Tadas / Vorobjovas, Viktoras / Jagniatinskis, Aleksandras / Fiks, Boris / Zofka, Ewa	Asphalt wearing course optimization for road traffic noise reduction	345-356
Vijay, Kunamineni / Murmu, Meena / Deo, Shirish V.	Bacteria based self healing concrete – A review	1008-1014
Zeng, Jun-Jie / Guo, Yong-Chang / Gao, Wan-Yang / Li, Jian-Zhang / Xie, Jian-he	Behavior of partially and fully FRP-confined circularized square columns under axial compression	319-332
Baravalle, Michele / Mikoschek, Michael / Colling, François / Köhler, Jochen	Calibration of simplified safety formats for structural timber design	1051-1058
Alam, Shahriar / Hossain, Zahid	Changes in fractional compositions of PPA and SBS modified asphalt binders	386-393
Lau, P. C. / Teo, D. C. L. / Mannan, M. A.	Characteristics of lightweight aggregate produced from lime-treated sewage sludge and palm oil fuel ash	558-567
Jin, Ming / Jiang, Linhua / Lu, Mengting / Xu, Ning / Zhu, Qiao	Characterization of internal damage of concrete subjected to freeze-thaw cycles by electrochemical impedance spectroscopy	702-707
Su, Ningyi / Xiao, Feipeng / Wang, Jingang / Amirkhanian, Serji	Characterizations of base and subbase layers for Mechanistic-Empirical Pavement Design	731-745
Wang, Xuebing / Pan, Zhihua	Chemical changes and reaction mechanism of hardened cement paste–(NH4)2SO4–H2O system	434-443
Blanco-Murillo, J. L. / Lluveras, D. / Yagüe Jiménez, V. / Anaya, J. J. / Casajús-Quirós, F. J. / Izquierdo, M. A. G. / Menéndez, J. M. / Hernández, M. G. / Herrera, A.	Combined US and UWB-RF imaging of concrete structures for identification and location of embedded materials	693-701
Vivek, S. S. / Narayanan, R. Surya / Dhinakaran, G.	Comparative study on flexural behaviour of RCC beam and SCC ternary beams with mineral admixtures	57-64
Mohd Hasan, Mohd Rosli / You, Zhanping / Yang, Xu	A comprehensive review of theory, development, and implementation of warm mix asphalt using foaming techniques	115-133
Galeote, Eduardo / Blanco, Ana / Cavalaro, Sergio H. P. / de la Fuente, Albert	Correlation between the Barcelona test and the bending test in fibre reinforced concrete	529-538
Comite, V. / Alvarez de Buergo, M. / Barca, D. / Belfiore, C. M. / Bonazza, A. / La Russa, M. F. / Pezzino, A. / Randazzo, L. / Ruffolo, S. A.	Damage monitoring on carbonate stones: Field exposure tests contributing to pollution impact evaluation in two Italian sites	907-922
Urrea-Ceferino, Gloria Esther / Rempe, Nolan / dos Santos, Valdemir / Savastano Junior, Holmer	Definition of optimal parameters for supercritical carbonation treatment of vegetable fiber-cement composites at a very early age	424-433
Liu, Hanqi / Luo, Rong	Development of master curve models complying with linear viscoelastic theory for complex moduli of asphalt mixtures with improved accuracy	259-268
Suh, Jung-Il / Jeon, Dongho / Yoon, Seyoon / Oh, Jae Eun / Park, Hong-Gun	Development of strong lightweight cementitious matrix for lightweight concrete simply by increasing a water-to-binder ratio in Ca(OH)2-Na2CO3-activated fly ash system	444-455
Zhang, Jian / Shi, Caijun / Zhang, Zuhua / Ou, Zhihua	Durability of alkali-activated materials in aggressive environments: A review on recent studies	598-613
Lu, Jingzhou / Zhu, Kongfeng / Tian, Lizong / Guo, Li	Dynamic compressive strength of concrete damaged by fatigue loading and freeze-thaw cycling	847-855
Zhang, Yinning / Druta, Cristian / Wang, Linbing / Xiong, Haocheng / Zhang, Wei	Dynamic responses of asphalt concrete slab under cyclic wheel loading using acceleration spectrum analysis	134-144
Lu, Linnu / Xiang, Congyang / He, Yongjia / Wang, Fazhou / Hu, Shuguang	Early hydration of C3S in the presence of Cd2+, Pb2+ and Cr3+ and the immobilization of heavy metals in pastes	923-932
Lu, Zeyu / Li, Xiangyu / Hanif, Asad / Chen, Binmeng / Parthasarathy, Pavithra / Yu, Jinguang / Li, Zongjin	Early-age interaction mechanism between the graphene oxide and cement hydrates	232-239
Hadigheh, S. A. / Gravina, R. J. / Smith, S. T.	Effect of acid attack on FRP-to-concrete bonded interfaces	285-303
Tran, Nhat Thanh / Takahashi, Osamu	Effect of aggregate gradation on the cracking performance of wearing course mixtures	520-528
Liu, Yufeng / Huang, Yucheng / Sun, Wenjuan / Nair, Harikrishnan / Stephen Lane, D. / Wang, Linbing	Effect of coarse aggregate morphology on the mechanical properties of stone matrix asphalt	48-56
Li, Jiasheng / Yu, Jianying / Wu, Shaopeng / Pang, Ling / Amirkhanian, Serji / Zhao, Meiling	Effect of inorganic ultraviolet resistance nanomaterials on the physical and rheological properties of bitumen	832-838
Arulrajah, Arul / Mohammadinia, Alireza / D'Amico, Angelo / Horpibulsuk, Suksun	Effect of lime kiln dust as an alternative binder in the stabilization of construction and demolition materials	999-1007
Nasir, Muhammad / Baghabra Al-Amoudi, Omar S. / Maslehuddin, Mohammed	Effect of placement temperature and curing method on plastic shrinkage of plain and pozzolanic cement concretes under hot weather	943-953
Mejdoub, Roukaya / Hammi, Halim / Khitouni, Mohamed / Suñol, Joan Josep / M'nif, Adel	The effect of prolonged mechanical activation duration on the reactivity of Portland cement: Effect of particle size and crystallinity changes	1041-1050
Aggelis, D. G. / El Kadi, M. / Tysmans, T. / Blom, J.	Effect of propagation distance on acoustic emission fracture mode classification in textile reinforced cement	872-879
Hu, Xiaodi / Jiang, Xia / Pan, Pan	Effect of sample setting time on experimental evaluation of hot mix asphalt	375-385
Sadowski, Łukasz / Stefaniuk, Damian / Hoła, Jerzy	The effect of the porosity within the interfacial zone between layers on pull-off adhesion	887-897
Araya-Letelier, G. / Antico, F. C. / Carrasco, M. / Rojas, P. / García-Herrera, C. M.	Effectiveness of new natural fibers on damage-mechanical performance of mortar	672-682
Arjmandi, Reza / Ismail, Atikah / Hassan, Azman / Abu Bakar, Aznizam	Effects of ammonium polyphosphate content on mechanical, thermal and flammability properties of kenaf/polypropylene and rice husk/polypropylene composites	484-493
Li, Xianjun / Hao, Jianying	Effects of mortar ratio on the properties of super early strength grouting materials by ternary complex system	769-776
Nabizadeh, Hesamaddin / Haghshenas, Hamzeh F. / Kim, Yong-Rak / Sacramento Aragão, Francisco Thiago	Effects of rejuvenators on high-RAP mixtures based on laboratory tests of asphalt concrete (AC) mixtures and fine aggregate matrix (FAM) mixtures	65-73
Shen, Peiliang / Lu, Linnu / Chen, Wei / Wang, Fazhou / Hu, Shuguang	Efficiency of metakaolin in steam cured high strength concrete	357-366
Ziari, Hassan / Habibnejad korayem, Asghar / Hajiloo, Mojtaba / Nakhaei, Mostafa / Razmjou, Amir / Divandari, Hassan	Evaluating the effect of amorphous carbon powder on moisture susceptibility and mechanical resistance of asphalt mixtures	182-191
Joshaghani, Alireza / Moeini, Mohammad Amin	Evaluating the effects of sugar cane bagasse ash (SCBA) and nanosilica on the mechanical and durability properties of mortar	818-831
Huang, Minrui / Ying, Xianbin / Shen, Dongsheng / Feng, Huajun / Li, Na / Zhou, Yuyang / Long, Yuyang	Evaluation of oil sludge as an alternative fuel in the production of Portland cement clinker	226-231
Seo, Soo-Yeon / Jeon, Su-Min	Evaluation of prism and diagonal tension strength of masonry form-block walls reinforced with steel fibers	394-405
Bulatović, Vesna / Melešev, Mirjana / Radeka, Miroslava / Radonjanin, Vlastimir / Lukić, Ivan	Evaluation of sulfate resistance of concrete with recycled and natural aggregates	614-631
Gundla, Akshay / Gudipudi, Padmini / Underwood, B. Shane	Evaluation of the sensitivity of asphalt concrete modulus to binder oxidation with a multiple length scale study	954-963
Katare, Vasudha D. / Madurwar, Mangesh V.	Experimental characterization of sugarcane biomass ash – A review	1-15
Chen, Zixuan / Peng, Yang / Su, Wang / Qian, Feng / Dong, Jun	Experimental investigation for anti-slipping performance of stainless steel slip-resistant connections with particles embedded in connected plates	1059-1067
Ma, Yafei / Guo, Zhongzhao / Wang, Lei / Zhang, Jianren	Experimental investigation of corrosion effect on bond behavior between reinforcing bar and concrete	240-249
Forquin, Pascal / Chen, Wen	An experimental investigation of the progressive collapse resistance of beam-column RC sub-assemblages	1068-1084
Su, Li / Wang, Yuan-Feng / Mei, Sheng-qi / Li, Peng-Fei	Experimental investigation on the fundamental behavior of concrete creep	250-258
Zhang, Huang / Wang, Bin / Xie, Aoyu / Qi, Yazhen	Experimental study on dynamic mechanical properties and constitutive model of basalt fiber reinforced concrete	154-167
Jang, Hyun-O / Lee, Han-Seung / Cho, Keunhee / Kim, Jinkyu	Experimental study on shear performance of plain construction joints integrated with ultra-high performance concrete (UHPC)	16-23
Sun, Li / Wei, Minghai / Zhang, Na	Experimental study on the behavior of GFRP reinforced concrete columns under eccentric axial load	214-225
Zhou, Jikai / Shen, Wei / Wang, Shifu	Experimental study on torsional behavior of FRC and ECC beams reinforced with GFRP bars	74-81
Lavrov, A. / Gawel, K. / Stroisz, A. / Torsæter, M. / Bakheim, S.	Failure modes in three-point bending tests of cement-steel, cement-cement and cement-sandstone bi-material beams	880-886
Li, Shibin / Tang, Hongwei / Gui, Qiang / Ma, Zhongguo John	Fatigue behavior of naturally corroded plain reinforcing bars	933-942
Li, Tao / Zhang, Yamei / Dai, Jian-Guo	Flexural behavior and microstructure of hybrid basalt textile and steel fiber reinforced alkali-activated slag panels exposed to elevated temperatures	651-660
Noaman, Ahmed Tareq / Bakar, B. H. Abu / Akil, Hazizan Md. / Alani, A. H.	Fracture characteristics of plain and steel fibre reinforced rubberized concrete	414-423
Li, Cheng / Ashlock, Jeramy C. / White, David J. / Jahren, Charles T. / Cetin, Bora	Gyratory abrasion with 2D image analysis test method for evaluation of mechanical degradation and changes in morphology and shear strength of compacted granular materials	547-557
Shen, Peiliang / Lu, Linnu / He, Yongjia / Wang, Fazhou / Hu, Shuguang	Hydration of quaternary phase-gypsum system	145-153
Grandclerc, Anaïs / Guéguen-Minerbe, Marielle / Nour, Issam / Dangla, Patrick / Chaussadent, Thierry	Impact of cement composition on the adsorption of hydrogen sulphide and its subsequent oxidation onto cementitious material surfaces	576-586
Harbi, Radhia / Derabla, Riad / Nafa, Zahreddine	Improvement of the properties of a mortar with 5% of kaolin fillers in sand combined with metakaolin, brick waste and glass powder in cement	632-641
Peyne, J. / Gautron, J. / Doudeau, J. / Joussein, E. / Rossignol, S.	Influence of calcium addition on calcined brick clay based geopolymers: A thermal and FTIR spectroscopy study	794-803
Sassani, Alireza / Ceylan, Halil / Kim, Sunghwan / Gopalakrishnan, Kasthurirangan / Arabzadeh, Ali / Taylor, Peter C.	Influence of mix design variables on engineering properties of carbon fiber-modified electrically conductive concrete	168-181
Islam, Azizul / Alengaram, U. Johnson / Jumaat, Mohd Zamin / Ghazali, Nurasyiqin Binti / Yusoff, Sumiani / Bashar, Iftekhair Ibnul	Influence of steel fibers on the mechanical properties and impact resistance of lightweight geopolymer concrete	964-977
Moon, Do Young / Ou, Yu-Chen / Roh, Hwasung	Interlaminar shear capacity of thermally damaged GFRP bars under alkaline concrete environment	105-114
Fakhri, Mansour / Maleki, Hossein / Hosseini, Sayyed Ali	Investigation of different test methods to quantify rutting resistance and moisture damage of GFM-WMA mixtures	1027-1040
Dartois, Sophie / Mom, Sophanarith / Dumontet, Hélène / Hamida, Abdelwahed Ben	An iterative micromechanical modeling to estimate the thermal and mechanical properties of polydisperse composites with platy particles: Application to anisotropic hemp and lime concretes	661-671
Zhang, Jizhe / Airey, Gordon D. / Grenfell, James / Yao, Zhanyong	Laboratory evaluation of Rediset modified bitumen based on rheology and adhesion properties	683-692
Lu, Haizhu / Alymov, Eugene / Shah, Sanjay / Peterson, Karl	Measurement of air void system in lightweight concrete by X-ray computed tomography	467-483
Shi, Xijun / Mukhopadhyay, Anol / Liu, Kai-Wei	Mix design formulation and evaluation of portland cement concrete paving mixtures containing reclaimed asphalt pavement	756-768
El Euch Ben Said, Sawssen / El Euch Khay, Saloua / Achour, Taoufik / Loulizi, Amara	Modelling of the adhesion between reclaimed asphalt pavement aggregates and hydrated cement paste	839-846
Zhang, Yao / Yan, Zhi-guo / Ju, J. Woody / Zhu, He-hua / Chen, Qing	A multi-level micromechanical model for elastic properties of hybrid fiber reinforced concrete	804-817
Zhao, Jie / Zheng, Jian-Jun / Peng, Gai-Fei / Van Breugel, Klaas	Numerical analysis of heating rate effect on spalling of high-performance concrete under high temperature conditions	456-466
Almalkawi, Areej T. / Hamadna, Sameer / Soroushian, Parviz	One-part alkali activated cement based volcanic pumice	367-374
Saeli, Manfredi / Tobaldi, David M. / Rozman, Nejc / Sever Škapin, Andrijana / Labrincha, João A. / Pullar, Robert C.	Photocatalytic nano-composite architectural lime mortar for degradation of urban pollutants under solar and visible (interior) light	206-213
Lim, Yee Yan / Kwong, Kok Zee / Liew, Willey Yun Hsien / Soh, Chee Kiong	Practical issues related to the application of piezoelectric based wave propagation technique in monitoring of concrete curing	506-519
Wang, Youde / Xu, Shanhua / Wang, Hao / Li, Anbang	Predicting the residual strength and deformability of corroded steel plate based on the corrosion morphology	777-793
Jin, Nan Ji / Seung, Inbae / Choi, Yoon Sang / Yeon, Jaeheum	Prediction of early-age compressive strength of epoxy resin concrete using the maturity method	990-998
Kong, Weibo / Liu, Zhimeng / Yang, Yunyun / zhou, Changlin / Lei, Jingxin	Preparation and characterizations of asphalt/lauric acid blends phase change materials for potential building materials	568-575
Ren, Changzai / Wang, Wenlong / Li, Guolin	Preparation of high-performance cementitious materials from industrial solid waste	39-47
Zhao, Yuxi / Zeng, Weilai / Zhang, Hongru	Properties of recycled aggregate concrete with different water control methods	539-546
Pradhan, Subhasis / Kumar, Shailendra / Barai, Sudhirkumar V.	Recycled aggregate concrete: Particle Packing Method (PPM) of mix design approach	269-284
Haach, Vladimir G. / Carrazedo, Ricardo / Oliveira, Luciane M. F.	Resonant acoustic evaluation of mechanical properties of masonry mortars	494-505
Sadati, Seyedhamed / Khayat, Kamal H.	Rheological and hardened properties of mortar incorporating high-volume ground glass fiber	978-989
Portugal, Antonio Carlos Xavier / Lucena, Leda Christiane de F. Lopes / Lucena, Adriano Elísio de Figueirêdo Lopes / Costa, Daniel Beserra / Araujo de Lima, Kenia	Rheological properties of asphalt binders prepared with maize oil	1015-1026
Chen, Tung-Tsan / Wang, Chien-Chih / Hsiung, B. C. Benson / Wang, Her-Yung	Seven-day test result assessment of the developed strength in composite cement mortar with slag	587-597
Hendi, Ali / Rahmani, Hamid / Mostofinejad, Davood / Tavakolinia, Ali / Khosravi, Mohsen	Simultaneous effects of microsilica and nanosilica on self-consolidating concrete in a sulfuric acid medium	192-205
Ferrier, E. / Agbossou, A.	Temperature effects on the shear capacity of external bonded fiber reinforced polymer on concrete	333-344
Yuan, Huang / Zhenggeng, Zhu / Naito, Clay J. / Weijian, Yi	Tensile behavior of half grouted sleeve connections: Experimental study and analytical modeling	96-104
Wu, Lingjie / Li, Wei / Yu, Xiaoniu	Time-dependent chloride penetration in concrete in marine environments	406-413
Karahan, Okan	Transport properties of high volume fly ash or slag concrete exposed to high temperature	898-906
Ridwan, Muhammad / Yoshitake, Isamu / Nassif, Ayman Y.	Two-dimensional fictitious truss method for estimation of out-of-plane strength of masonry walls	24-38
Rizwan, Syed Ali / Khan, Hasnain / Bier, Thomas A. / Adnan, Fazal	Use of Effective Micro-organisms (EM) technology and self-compacting concrete (SCC) technology improved the response of cementitious systems	642-650
Abdel Wahab, Mona / Abdel Latif, Ibrahim / Kohail, Mohamed / Almasry, Amira	The use of Wollastonite to enhance the mechanical properties of mortar mixes	304-309
Khorami, Morteza / Ganjian, Eshmaeil / Mortazavi, Azamalsadat / Saidani, Messaoud / Olubanwo, Adegoke / Gand, Alfred	Utilisation of waste cardboard and Nano silica fume in the production of fibre cement board reinforced by glass fibres	746-755
Yang, Weiguo / Sun, Xinyang / Wang, Meng / Liu, Pei	Vertical stiffness degradation of laminated rubber bearings under lateral deformation	310-318
Lal, Sreeyuth / Poulikakos, Lily / Jerjen, Iwan / Vontobel, Peter / Partl, Manfred N. / Derome, Dominique / Carmeliet, Jan	Wetting and drying in hydrophobic, macroporous asphalt structures	82-95

Über diese
Datenseite
IssueID
22639
Veröffentlicht am:
14.12.2018
Geändert am:
30.06.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - Oktober 2017

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - Oktober 2017

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.