Construction and Building Materials - Oktober 2017

Erschienen:	Oktober 2017

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Zhu, Chongzheng / Zhang, Henglong / Xu, Guoqing / Shi, Caijun	Aging rheological characteristics of SBR modified asphalt with multi-dimensional nanomaterials	388-393
Du, Peng / Xu, Dongyu / Huang, Shifeng / Cheng, Xin	Assessment of corrosion of reinforcing steel bars in concrete using embedded piezoelectric transducers based on ultrasonic wave	925-930
Çobanoğlu, İbrahim / Çelik, Sefer Beran	Assessments on the usability of Wide Wheel (Capon) test as reference abrasion test method for building stones	319-330
Ma, Hui / Cai, Jingming / Lin, Zhan / Qian, Shunzhi / Li, Victor C.	CaCO 3 whisker modified Engineered Cementitious Composite with local ingredients	1-8
Shu, C. X. / Cantisani, E. / Fratini, F. / Rasmussen, K. L. / Rovero, L. / Stipo, G. / Vettori, S.	China's brick history and conservation: laboratory results of Shanghai samples from 19th to 20th century	789-800
Wang, Yang / Wang, Chao / Bahia, Hussain	Comparison of the fatigue failure behaviour for asphalt binder using both cyclic and monotonic loading modes	767-774
Zhang, She-rong / Wang, Xiao-hua / Wang, Chao / Song, Ran / Huo, Heng-yan	Compressive behavior and constitutive model for roller compacted concrete under impact loading: Considering vertical stratification	428-440
Gao, Zhengboyang / Qian, Yu / Dersch, Marcus S. / Edwards, J. Riley	Compressive stress distribution in prestressed concrete and its effect on railroad crosstie design	147-157
Liu, Huajie / Bu, Yuhuan / Guo, Quanqing / Sanjayan, Jay G.	Converting hydration heat to achieve cement mixture with early strength and low hydrating-thermal dissipation	113-118
Dong, Jianfeng / Zhao, Yuxi / Wang, Kun / Jin, Weiliang	Crack propagation and flexural behaviour of RC beams under simultaneous sustained loading and steel corrosion	208-219
Tena-Colunga, Arturo / Urbina-Californias, Luis Angel / Archundia-Aranda, Hans I.	Cyclic behavior of continuous reinforced concrete haunched beams with transverse reinforcement designed to fail in shear	546-562
Chen, Fei / Gao, Jianming / Qi, Bing / Shen, Daman / Li, Luyang	Degradation progress of concrete subject to combined sulfate-chloride attack under drying-wetting cycles and flexural loading	164-171
Cheng, Donghui / Yang, Yanhong	Design method for concrete columns strengthened with prestressed CFRP sheets	331-344
Guo, Xiaolu / Zhang, Liyan / Huang, Jiabao / Shi, Huisheng	Detoxification and solidification of heavy metal of chromium using fly ash-based geopolymer with chemical agents	394-404
Huang, Kaijian / Zollinger, Dan G. / Shi, Xijun / Sun, Peizhi	A developed method of analyzing temperature and moisture profiles in rigid pavement slabs	782-788
Ghayeb, Haider Hamad / Razak, Hashim Abdul / Ramli Sulong, N. H.	Development and testing of hybrid precast concrete beam-to-column connections under cyclic loading	258-278
Krivenko, Pavel / Kovalchuk, Oleksandr / Pasko, Anton / Croymans, Tom / Hult, Mikael / Lutter, Guillaume / Vandevenne, Niels / Schreurs, Sonja / Schroeyers, Wouter	Development of alkali activated cements and concrete mixture design with high volumes of red mud	819-826
Kashi, Amin / Ramezanianpour, Ali Akbar / Moodi, Faramarz	Durability evaluation of retrofitted corroded reinforced concrete columns with FRP sheets in marine environmental conditions	520-533
Jiang, Yuchen / Hong, Wan / Hu, Xiamin / Crocetti, Roberto / Wang, Lei / Sun, Weimin	Early-age performance of lag screw shear connections for glulam-lightweight concrete composite beams	36-42
Li, Long / Poon, Chi Sun / Xiao, Jianzhuang / Xuan, Dongxing	Effect of carbonated recycled coarse aggregate on the dynamic compressive behavior of recycled aggregate concrete	52-62
Meng, Tao / Qiang, Yejia / Hu, Anfeng / Xu, Chuntai / Lin, Lei	Effect of compound nano-CaCO 3 addition on strength development and microstructure of cement-stabilized soil in the marine environment	775-781
Huang, Weidong / Lin, Peng / Tang, Naipeng / Hu, Jianying / Xiao, Feipeng	Effect of crumb rubber degradation on components distribution and rheological properties of Terminal Blend rubberized asphalt binder	897-906
Chong, Linlin / Yang, Jianming / Shi, Caijun	Effect of curing regime on water resistance of magnesium–potassium phosphate cement	43-51
Cravo, Julio Cesar Machado / de Lucca Sartori, Diogo / Mármol, Gonzalo / Mether Schmidt, Gustavo / de Carvalho Balieiro, Julio Cesar / Fiorelli, Juliano	Effect of density and resin on the mechanical, physical and thermal performance of particleboards based on cement packaging	414-421
Jiang, Linhua / Li, Chenzhi / Zhu, Chenglong / Song, Zijian / Chu, Hongqiang	The effect of tensile fatigue on chloride ion diffusion in concrete	119-126
Vahedian, Abbas / Shrestha, Rijun / Crews, Keith	Effective bond length and bond behaviour of FRP externally bonded to timber	742-754
Barra Bizinotto, Marilda / Faleschini, Flora / Jiménez Fernández, Cristian Gonzalo / Aponte Hernández, Diego Fernando	Effects of chemical admixtures on the rheology of fresh recycled aggregate concretes	353-362
He, Yan / Zhang, Xiong / Hooton, R. D. / Zhang, Xiaowei	Effects of interface roughness and interface adhesion on new-to-old concrete bonding	582-590
Gao, Yingli / He, Bei / Li, Youyun / Tang, Jianliang / Qu, Liangchen	Effects of nano-particles on improvement in wear resistance and drying shrinkage of road fly ash concrete	228-235
Ahmad, Mohiuddin / Faisal, Hasan M. / Mannan, Umme A. / Tarefder, Rafiqul A.	Effects of pore structure on oxidative aging and related mechanical properties of asphalt concrete	636-641
Angelin, Andressa F. / Cecche Lintz, Rosa C. / Gachet-Barbosa, Luísa A. / Osório, Wislei R.	The effects of porosity on mechanical behavior and water absorption of an environmentally friendly cement mortar with recycled rubber	534-545
Yu, Yujie / Chen, Zhihua / Liu, Hongbo / Wang, Xiaoxiang	Effects of strength-weakening oriented heat treatment on structural steel and its application on steel plate shear walls	827-839
Wang, Z. M. / Huang, Y. J. / Yang, Z. J. / Liu, G. H. / Wang, F.	Efficient meso-scale homogenisation and statistical size effect analysis of concrete modelled by scaled boundary finite element polygons	449-463
Ontiveros-Ortega, E. / Ontiveros-Ortega, A. / Moleon, J. A. / Ruiz-Agudo, E.	Electrokinetic and thermodynamic characterization of lime-water interface: Physical and rheological properties of lime mortar	809-818
Liu, Zhifang / Ge, Heyi / Wu, Jiaming / Chen, Juan	Enhanced electromagnetic interference shielding of carbon fiber/cement composites by adding ferroferric oxide nanoparticles	575-581
Vasanelli, Emilia / Colangiuli, Donato / Calia, Angela / Luprano, Vincenza A. M.	Estimating in situ concrete strength combining direct and indirect measures via cross validation procedure	916-924
Fiore, Nicola / Caro, Silvia / D'Andrea, Antonio / Scarsella, Marco	Evaluation of bitumen modification with crumb rubber obtained through a high pressure water jet (HPWJ) process	682-691
Kabagire, K. Daddy / Diederich, Paco / Yahia, Ammar / Chekired, Mohamed	Experimental assessment of the effect of particle characteristics on rheological properties of model mortar	615-624
Wei, Kai / Yang, Qilu / Dou, Yinling / Wang, Feng / Wang, Ping	Experimental investigation into temperature- and frequency-dependent dynamic properties of high-speed rail pads	848-858
Yan, Jia-Bao / Xie, Jian	Experimental studies on mechanical properties of steel reinforcements under cryogenic temperatures	661-672
Xu, Ming / Cui, Zhaoyan / Chen, Zhongfan / Xiang, Jinhua	Experimental study on compressive and tensile properties of a bamboo scrimber at elevated temperatures	732-741
Nguyen, L. H. / Beaucour, A.-L. / Ortola, S. / Noumowe, A.	Experimental study on the thermal properties of lightweight aggregate concretes at different moisture contents and ambient temperatures	720-731
Chen, Lou / Zheng, Keren / Liu, Yang	Geopolymer-supported photocatalytic TiO 2 film: Preparation and characterization	63-70
Lo Monte, Francesco / Lombardi, Federico / Felicetti, Roberto / Lualdi, Maurizio	Ground-Penetrating Radar monitoring of concrete at high temperature	881-888
Hashimoto, Shinobu / Machino, Tatsuya / Ando, Kotaro / Daiko, Yusuke / Honda, Sawao / Iwamoto, Yuji	Hot sulfuric acid-resistance of fly-ash-based geopolymer paste product due to the precipitation of natroalunite crystals	714-719
Zhang, Yu / Zhang, Lei / Pan, Zhenhao / Meng, Qinglin / Feng, Yanshan / Chen, Yuanrui	Hydrological properties and solar evaporative cooling performance of porous clay tiles	9-17
Guo, Meng / Tan, Yiqiu / Hou, Yue / Wang, Linbing / Wang, Yiqi	Improvement of evaluation indicator of interfacial interaction between asphalt binder and mineral fillers	236-245
Elkashef, Mohamed / Williams, R. Christopher	Improving fatigue and low temperature performance of 100% RAP mixtures using a soybean-derived rejuvenator	345-352
İlkentapar, S. / Atis, C. D. / Karahan, O. / Görür Avşaroğlu, E. B.	Influence of duration of heat curing and extra rest period after heat curing on the strength and transport characteristic of alkali activated class F fly ash geopolymer mortar	363-369
Huang, Ming / Wen, Xuejun / Wang, Linbing	Influence of foaming effect, operation time and health preserving properties of foam epoxy asphalt mixtures	931-938
Carmo, R. N. F. / Costa, H. / Júlio, E.	Influence of nanoparticles additions on the bond between steel fibres and the binding paste	312-318
Samimi, Kianoosh / Kamali-Bernard, Siham / Maghsoudi, Ali Akbar / Maghsoudi, Mohammad / Siad, Hocine	Influence of pumice and zeolite on compressive strength, transport properties and resistance to chloride penetration of high strength self-compacting concretes	292-311
Tulashie, Samuel Kofi / Kotoka, Francis / Mensah, David / Kwablah, Anthony Kwame	Investigation of the compressive strength of pit sand, and sea sand mortar prisms produced with rice husk ash as additive	383-387
Zhu, Ji-Hua / Wei, Liangliang / Moahmoud, Hitham / Redaelli, Elena / Xing, Feng / Bertolini, Luca	Investigation on CFRP as dual-functional material in chloride-contaminated solutions	127-137
Yang, Huaquan / Li, Pengxiang / Rao, Meijuan	Long term investigation and inhibition on alkali-aggregates reaction of Three Gorges Dam concrete	673-681
Tian, Yuwan / Dong, Chaofang / Cheng, Xuequn / Wan, Yingqi / Wang, Gui / Xiao, Kui / Li, Xiaogang	The micro-solution electrochemical method to evaluate rebar corrosion in reinforced concrete structures	607-614
Gao, Lei / Li, Hua / Xie, Jianguang / Yang, Xu	Mixed-mode fracture modeling of cold recycled mixture using discrete element method	625-635
Hernández-Bautista, E. / Sandoval-Torres, S. / Cano-Barrita, P. F. de J. / Bentz, D. P.	Modeling heat and moisture transport in steam-cured mortar: Application to AASHTO Type VI beams	186-195
Huang, Yanxin / Ye, Hailong / Fu, Chuanqing / Jin, Nanguo	Modeling moisture transport at the surface layer of fatigue-damaged concrete	196-207
Kim, Sung-Yun / Lee, Phill-Seung	Modeling of helically stranded cables using multiple beam finite elements and its application to torque balance design	591-606
Li, Dengke / Zhao, Wanyu / Hou, Dongshuai / Zhao, Tiejun	Molecular dynamics study on the chemical bound, physical adsorbed and ultra-confined water molecules in the nano-pore of calcium silicate hydrate	563-574
Amriou, Abderrachid / Bencheikh, Mohamed	New experimental method for evaluating the water permeability of concrete by a lateral flow procedure on a hollow cylindrical test piece	642-649
Madandoust, Rahmat / Kazemi, Mostafa	Numerical analysis of break-off test method on concrete	487-493
Dehestani, M. / Asadi, A. / Mousavi, S. S.	On discrete element method for rebar-concrete interaction	220-227
Shin, Kyung Joon / Bae, Wonho / Choi, Seul-woo / Son, Min Woo / Lee, Kwang Myong	Parameters influencing water permeability coefficient of cracked concrete specimens	907-915
Wang, Zhiqiang / Fu, Hongmei / Gong, Meng / Luo, Jiayan / Dong, Weiqun / Wang, Ting / Chui, Ying Hei	Planar shear and bending properties of hybrid CLT fabricated with lumber and LVL	172-177
Lee, Heeyoung / Jung, Woo Tai / Chung, Wonseok	Post-tension near-surface-mounted strengthening systems of full-scale PSC girders	71-82
Arshad, Muhammad / Ahmed, Muhammad Farooq	Potential use of reclaimed asphalt pavement and recycled concrete aggregate in base/subbase layers of flexible pavements	83-97
Cho, Sung-Sil / Yoo, Jae-Sung / Kim, Jin-Man / Hong, Ic-Pyo	Prediction of electromagnetic transmission properties using dielectric property modeling of foamed concrete containing BFS	650-660
AliAhmad, Mostafa / Miri, Mahmoud / Rashki, Mohsen	Probabilistic and experimental investigating the effect of pozzolan and Lumachelle fine aggregates on roller compacted concrete properties	755-766
Sharma, Narendra Kumar / Kumar, Praveen / Kumar, Sanjeev / Thomas, Blessen Skariah / Gupta, Ramesh Chandra	Properties of concrete containing polished granite waste as partial substitution of coarse aggregate	158-163
Portella, K. F. / Mazur, M. M. / Bragança, M. O. G. P. / Silva, E. de M. / Pianaro, S. A. / Ribeiro, B. E. / Lagoeiro, L. / Alberti, E.	Pulsed DC plasma as a tool for the generation of nanomaterials that mitigate the alkali-aggregate reaction in Portland cement concretes	889-896
Contrafatto, Loredana	Recycled Etna volcanic ash for cement, mortar and concrete manufacturing	704-713
Arulrajah, Arul / Kua, Teck-Ang / Horpibulsuk, Suksun / Mirzababaei, Mehdi / Chinkulkijniwat, Avirut	Recycled glass as a supplementary filler material in spent coffee grounds geopolymers	18-27
Koenig, Andreas / Herrmann, Annemarie / Overmann, Steffen / Dehn, Frank	Resistance of alkali-activated binders to organic acid attack: Assessment of evaluation criteria and damage mechanisms	405-413
Xu, Guangji / Wang, Hao / Zhu, Hongzhou	Rheological properties and anti-aging performance of asphalt binder modified with wood lignin	801-808
Behnood, Ali / Olek, Jan	Rheological properties of asphalt binders modified with styrene-butadiene-styrene (SBS), ground tire rubber (GTR), or polyphosphoric acid (PPA)	464-478
Talero, R. / Pedrajas, C. / González, M. / Aramburo, C. / Blázquez, A. / Rahhal, V.	Role of the filler on Portland cement hydration at very early ages: Rheological behaviour of their fresh cement pastes	939-949
Ngo, Tri Thuong / Park, Jun Kil / Pyo, Sukhoon / Kim, Dong joo	Shear resistance of ultra-high-performance fiber-reinforced concrete	246-257
Soto Izquierdo, Indara / Soto Izquierdo, Orieta / Ramalho, Marcio Antonio / Taliercio, Alberto	Sisal fiber reinforced hollow concrete blocks for structural applications: Testing and modeling	98-112
Wang, Qiang / Wang, Dengquan / Zhuang, Shiyu	The soundness of steel slag with different free CaO and MgO contents	138-146
Jang, J. G. / Park, S. M. / Kim, G. M. / Lee, H. K.	Stability of MgO-modified geopolymeric gel structure exposed to a CO 2 -rich environment	178-185
Lee, Bokyeong / Kim, Gyuyong / Kim, Raehwan / Cho, Bongsuk / Lee, Sujeong / Chon, Chul-Min	Strength development properties of geopolymer paste and mortar with respect to amorphous Si/Al ratio of fly ash	512-519
Acar, Volkan / Cakir, Ferit / Uysal, Habib / Seydibeyoglu, M. Ozgur / Akbulut, Hamit / Mosalam, Khalid M.	Strengthening of concrete beams by monolayer prepreg composites with and without graphene reinforcement	866-880
Azam, Rizwan / Soudki, Khaled / West, Jeffrey S. / Noël, Martin	Strengthening of shear-critical RC beams: Alternatives to externally bonded CFRP sheets	494-503
Ali, Osama	Structural reliability of biaxial loaded Short/Slender-Square FRP-confined RC columns	370-382
Xu, Xiong / Yu, Jianying / Xue, Lihui / Zhang, Canlin / He, Bianyang / Wu, Min	Structure and performance evaluation on aged SBS modified bitumen with bi- or tri-epoxy reactive rejuvenating system	479-486
Arif, Elisabeth / Clark, Malcolm W. / Lake, Neal	Sugar cane bagasse ash from a high-efficiency co-generation boiler as filler in concrete	692-703
Zuccheratte, Ana Cristina Vieira / Freire, Carolina Braccini / Soares Lameiras, Fernando	Synthetic gravel for concrete obtained from sandy iron ore tailing and recycled polyethyltherephtalate	859-865
Raoof, Saad M. / Koutas, Lampros N. / Bournas, Dionysios A.	Textile-reinforced mortar (TRM) versus fibre-reinforced polymers (FRP) in flexural strengthening of RC beams	279-291
Zhang, Lei / Gustavsen, Arild / Jelle, Bjørn Petter / Yang, Liu / Gao, Tao / Wang, Yu	Thermal conductivity of cement stabilized earth blocks	504-511
Venu, M. / Rao, T. D. Gunneswara	Tie-confinement aspects of fly ash-GGBS based geopolymer concrete short columns	28-35
Lai, Wallace W. L. / Leong-Ying Ho, Missoni / Chang, Ray K. W. / Sham, Janet F. C. / Poon, Chi-Sun	Tracing and imaging minor water seepage of concealed PVC pipe in a reinforced concrete wall by high-frequency ground penetrating radar	840-847
Turk, Kazim / Kina, Ceren / Bagdiken, Mahmut	Use of binary and ternary cementitious blends of F-Class fly-ash and limestone powder to mitigate alkali-silica reaction risk	422-427
Lim, Siong Kang / Tan, Cher Siang / Li, Bo / Ling, Tung-Chai / Hossain, Md. Uzzal / Poon, Chi Sun	Utilizing high volumes quarry wastes in the production of lightweight foamed concrete	441-448

Über diese
Datenseite
IssueID
22638
Veröffentlicht am:
14.12.2018
Geändert am:
30.06.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - Oktober 2017

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - Oktober 2017

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.