Construction and Building Materials - Juli 2017

Erschienen:	Juli 2017

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Guo, Shenglai / Liu, Huajie / Shan, Yue / Bu, Yuhuan	The application of a combination of treated AMPS/IA copolymer and borax as the retarder of calcium aluminate phosphate cement	51-58
Datsiou, Kyriaki Corinna / Overend, Mauro	Artificial ageing of glass with sand abrasion	536-551
del Mar Barbero-Barrera, María / Flores-Medina, Nelson / Pérez-Villar, Víctor	Assessment of thermal performance of gypsum-based composites with revalorized graphite filler	83-91
Donmez Cavdar, Ayfer / Yel, Husnu / Boran, Sevda / Pesman, Emrah	Cement type composite panels manufactured using paper mill sludge as filler	410-416
Ukwatta, Aruna / Mohajerani, Abbas	Characterisation of fired-clay bricks incorporating biosolids and the effect of heating rate on properties of bricks	11-22
Yang, Xu / Sun, Zhenping / Shui, Liangliang / Ji, Yanliang	Characterization of the absolute volume change of cement pastes in early-age hydration process based on helium pycnometry	490-498
Vucetic, Snezana / Ranogajec, Jonjaua / Markov, Sinisa / Vidakovic, Ana / Hirsenberger, Helena / Bera, Oskar	Development and modeling of the effective bioactive poultices for reducing the nitrate content in building materials	506-513
Ruan, S. / Unluer, C.	Effect of air entrainment on the performance of reactive MgO and PC mixes	221-232
Siddique, Rafat / Jameel, Abir / Singh, Malkit / Barnat-Hunek, Danuta / Aït-Mokhtar, Abdelkarim / Belarbi, Rafik / Rajor, Anita	Effect of bacteria on strength, permeation characteristics and micro-structure of silica fume concrete	92-100
Zhang, Zhiwei / Qian, Jueshi	Effect of protogenetic anhydrite on the hydration of cement under different curing temperature	417-422
Rosales, J. / Cabrera, M. / Agrela, F.	Effect of stainless steel slag waste as a replacement for cement in mortars. Mechanical and statistical study	444-458
Girskas, Giedrius / Skripkiūnas, Gintautas	The effect of synthetic zeolite on hardened cement paste microstructure and freeze-thaw durability of concrete	117-127
Abera, Kokeb A. / Manahiloh, Kalehiwot Nega / Motalleb Nejad, Mohammad	The effectiveness of global thresholding techniques in segmenting two-phase porous media	256-267
Li, Lang / Jia, Pu / Dong, Jiangfeng / Shi, Long / Zhang, Guomin / Wang, Qingyuan	Effects of cement dosage and cooling regimes on the compressive strength of concrete after post-fire-curing from 800 °C	208-220
Gibreil, Hussein A. A. / Feng, Cheng Pei	Effects of high-density polyethylene and crumb rubber powder as modifiers on properties of hot mix asphalt	101-108
Choi, Pangil / Yun, Kyong-Ku / Yeon, Jung Heum	Effects of mineral admixtures and steel fiber on rheology, strength, and chloride ion penetration resistance characteristics of wet-mix shotcrete mixtures containing crushed aggregates	376-384
Li, Wengui / Long, Chu / Tam, Vivian W. Y. / Poon, Chi-Sun / Duan, Wen Hui	Effects of nano-particles on failure process and microstructural properties of recycled aggregate concrete	42-50
Guo, Yiqun / Zhang, Tongsheng / Wei, Jiangxiong / Yu, Qijun / Ouyang, Shixi	Evaluating the distance between particles in fresh cement paste based on the yield stress and particle size	109-116
Liu, Xiaoyu / Yang, Zheng	Evaluation of several multiaxial failure criteria for concrete after freeze-thaw (F-T) cycles	233-247
Borsoi, Giovanni / Lubelli, Barbara / van Hees, Rob / Veiga, Rosário / Silva, António Santos	Evaluation of the effectiveness and compatibility of nanolime consolidants with improved properties	385-394
Oskouei, Asghar Vatani / Afzali, Mohammad / Madadipour, Mohammadreza	Experimental investigation on mud bricks reinforced with natural additives under compressive and tensile tests	137-147
Vilhena, António / Silva, Carla / Fonseca, Paulo / Couto, Sandra	Exterior walls covering system to improve thermal performance and increase service life of walls in rehabilitation interventions	354-362
Maybury, J. / Ho, J. C. M. / Binhowimal, S. A. M.	Fillers to lessen shear thickening of cement powder paste	268-279
Cai, Jingming / Pan, Jinlong / Zhou, Xiangming	Flexural behavior of basalt FRP reinforced ECC and concrete beams	423-430
Chen, Yu / Feng, Ran / Xu, Jie	Flexural behaviour of CFRP strengthened concrete-filled aluminium alloy CHS tubes	295-319
Wei, Yang / Ji, Xuewei / Duan, Maojun / Li, Guofen	Flexural performance of bamboo scrimber beams strengthened with fiber-reinforced polymer	66-82
Kazemi, M. T. / Golsorkhtabar, H. / Beygi, M. H. A. / Gholamitabar, M.	Fracture properties of steel fiber reinforced high strength concrete using work of fracture and size effect methods	482-489
Pakravan, H. R. / Latifi, M. / Jamshidi, M.	Hybrid short fiber reinforcement system in concrete: A review	280-294
Yu, Bo / Liu, Jianbo / Li, Bing	Improved numerical model for steel reinforcement corrosion in concrete considering influences of temperature and relative humidity	175-186
Kumar, Rakesh	Influence of recycled coarse aggregate derived from construction and demolition waste (CDW) on abrasion resistance of pavement concrete	248-255
Nunes, Cristiana / Pel, Leo / Kunecký, Jiří / Slížková, Zuzana	The influence of the pore structure on the moisture transport in lime plaster-brick systems as studied by NMR	395-409
Elsanadedy, Hussein M. / Almusallam, Tarek H. / Al-Salloum, Yousef A. / Abbas, Husain	Investigation of precast RC beam-column assemblies under column-loss scenario	552-571
Wang, Zhenjun / Zhang, Ting / Shao, Mingyu / Ai, Tao / Zhao, Peng	Investigation on snow-melting performance of asphalt mixtures incorporating with salt-storage aggregates	187-198
Arrigoni, Alessandro / Beckett, Christopher / Ciancio, Daniela / Dotelli, Giovanni	Life cycle analysis of environmental impact vs. durability of stabilised rammed earth	128-136
Chen, Min / Gao, Peiwei / Geng, Fei / Zhang, Lifang / Liu, Hongwei	Mechanical and smart properties of carbon fiber and graphite conductive concrete for internal damage monitoring of structure	320-327
Hamad, Rami J. A. / Johari, M. A. Megat / Haddad, Rami H.	Mechanical properties and bond characteristics of different fiber reinforced polymer rebars at elevated temperatures	521-535
Xu, Siyuan / Xiao, Feipeng / Amirkhanian, Serji / Singh, Dharamveer	Moisture characteristics of mixtures with warm mix asphalt technologies – A review	148-161
Bie, Yajing / Qiang, Sheng / Sun, Xiao / Song, Jiadong	A new formula to estimate final temperature rise of concrete considering ultimate hydration based on equivalent age	514-520
Sathiparan, Navaratnarajah / Rupasinghe, Miuru Nishanthana / Pavithra, Bhasura H. M.	Performance of coconut coir reinforced hydraulic cement mortar for surface plastering application	23-30
Li, Guo / Dong, Lei / Bai, Zhu'an / Lei, Ming / Du, Jianmin	Predicting carbonation depth for concrete with organic film coatings combined with ageing effects	59-65
Behnood, Ali / Behnood, Venous / Modiri Gharehveran, Mahsa / Alyamaç, Kürşat Esat	Prediction of the compressive strength of normal and high-performance concretes using M5P model tree algorithm	199-207
Liu, P.-L. / Lin, L.-C. / Hsu, Y.-Y. / Yeh, C.-Y. / Yeh, P.-L.	Recognition of rebars and cracks based on impact-echo phase analysis	1-6
Sun, Guoxing / Liang, Rui / Lu, Zeyu / Shi, Tiansheng / Geng, Ping / Li, Zongjin	Remarkable mechanical enhancement achieved by interfacial strengthening of organic/inorganic/fiber composites	7-10
Durgun, Muhammed Yasin / Atahan, Hakan Nuri	Rheological and fresh properties of reduced fine content self-compacting concretes produced with different particle sizes of nano SiO2	431-443
Yoo, Doo-Yeol / Banthia, Nemkumar	Size-dependent impact resistance of ultra-high-performance fiber-reinforced concrete beams	363-375
Lee, Yeong Huei / Shek, Poi Ngian / Mohammad, Shahrin	Structural performance of reinforced interlocking blocks column	469-481
Li, Yue / Bai, Weiliang / Shi, Tongfei	A study of the bonding performance of magnesium phosphate cement on mortar and concrete	459-468
Zhang, Lihua / Zhang, Yunsheng / Liu, Chuanbei / Liu, Laibao / Tang, Kaijing	Study on microstructure and bond strength of interfacial transition zone between cement paste and high-performance lightweight aggregates prepared from ferrochromium slag	31-41
Abreu, Liliana P. F. / Oliveira, Joel R. M. / Silva, Hugo M. R. D. / Palha, Daniela / Fonseca, Paulo V.	Suitability of different foamed bitumens for warm mix asphalts with increasing recycling rates	342-353
Ryms, Michał / Denda, Hubert / Jaskuła, Piotr	Thermal stabilization and permanent deformation resistance of LWA/PCM-modified asphalt road surfaces	328-341
Barnat-Hunek, Danuta / Siddique, Rafat / Klimek, Beata / Franus, Małgorzata	The use of zeolite, lightweight aggregate and boiler slag in restoration renders	162-174
Maleki, Sadegh / Kazemi Najafi, Saeed / Ebrahimi, Ghanbar / Ghofrani, Mohammad	Withdrawal resistance of screws in structural composite lumber made of poplar (Populus deltoides)	499-505

Über diese
Datenseite
IssueID
22628
Veröffentlicht am:
15.12.2018
Geändert am:
30.06.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - Juli 2017

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - Juli 2017

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.