Construction and Building Materials - Februar 2017

Erschienen:	Februar 2017

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Remesar, Jose C. / Vera, Sergio / Lopez, Mauricio	Assessing and understanding the interaction between mechanical and thermal properties in concrete for developing a structural and insulating material	353-364
Hlavička, Éva Lublóy-Viktor	Bond after fire	210-218
Bordy, Arthur / Younsi, Akli / Aggoun, Salima / Fiorio, Bruno	Cement substitution by a recycled cement paste fine: Role of the residual anhydrous clinker	1-8
Letelier, Viviana / Tarela, Ester / Muñoz, Pedro / Moriconi, Giacomo	Combined effects of recycled hydrated cement and recycled aggregates on the mechanical properties of concrete	365-375
Yoo, Doo-Yeol / Kim, Sung-Wook / Park, Jung-Jun	Comparative flexural behavior of ultra-high-performance concrete reinforced with hybrid straight steel fibers	219-229
Shen, Lu / Wang, Licheng / Song, Yupu / Shi, Linlin	Comparison between dynamic mechanical properties of dam and sieved concrete under biaxial tension-compression	43-50
Sangiorgi, Cesare / Eskandarsefat, Shahin / Tataranni, Piergiorgio / Simone, Andrea / Vignali, Valeria / Lantieri, Claudio / Dondi, Giulio	A complete laboratory assessment of crumb rubber porous asphalt	500-507
Akcay, Cemil / Sayin, Baris / Yildizlar, Baris	The conservation and repair of historical masonry ruins based on laboratory analyses	383-394
Bozorgzad, Ashkan / Lee, Hosin "David"	Consistent distribution of air voids and asphalt and random orientation of aggregates by flipping specimens during gyratory compaction process	376-382
Kuang, K. S. C. / Goh, T. W. K.	Crack sensing and healing in concrete beams based on wire-crack sensors and healing tube	395-411
Oudjene, M. / Tran, V.-D. / Khelifa, M.	Cyclic and monotonic responses of double shear single dowelled timber connections made of hardwood species: Experimental investigations	188-195
Wang, Xiaohan / Liu, Bingkang / Zhang, Cong	Cyclic torsion performance of recycled aggregate concrete beams with or without fly ash	529-542
Mignon, Arn / Vagenende, Maxime / Martins, José / Dubruel, Peter / Van Vlierberghe, Sandra / De Belie, Nele	Development of amine-based pH-responsive superabsorbent polymers for mortar applications	556-564
Siad, Ali / Bencheikh, Mohamed / Hussein, Luaay	Effect of combined pre-cracking and corrosion on the method of repair of concrete beams	462-469
Miró, Rodrigo / Martìnez, Adriana H. / Pérez-Jiménez, Félix E. / Botella, Ramón / Álvarez, Allex	Effect of filler nature and content on the bituminous mastic behaviour under cyclic loads	33-42
Zhu, Xiao Hong / Kang, Xiao Juan / Yang, Kai / Yang, Chang Hui	Effect of graphene oxide on the mechanical properties and the formation of layered double hydroxides (LDHs) in alkali-activated slag cement	290-295
He, Yan / Zhang, Xiong / Hooton, R. D.	Effects of organosilane-modified polycarboxylate superplasticizer on the fluidity and hydration properties of cement paste	112-123
Zhang, Ge / Li, Guoxin / He, Tingshu	Effects of sulphoaluminate cement on the strength and water stability of magnesium potassium phosphate cement	335-342
Mozumder, Ruhul Amin / Laskar, Aminul Islam / Hussain, Monowar	Empirical approach for strength prediction of geopolymer stabilized clayey soil using support vector machines	412-424
Pokorný, Petr / Tej, Petr / Kouřil, Milan	Evaluation of the impact of corrosion of hot-dip galvanized reinforcement on bond strength with concrete – A review	271-289
Ghorbani, Majid / Mostofinejad, Davood / Hosseini, Ardalan	Experimental investigation into bond behavior of FRP-to-concrete under mixed-mode I/II loading	303-312
Wang, Xiaoran / Liu, Xiaofei / Wang, Enyuan / Li, Xuelong / Zhang, Xin / Zhang, Chong / Kong, Biao	Experimental research of the AE responses and fracture evolution characteristics for sand-paraffin similar material	446-456
Awani, Oluwafunmilayo / El-Maaddawy, Tamer / Ismail, Najif	Fabric-reinforced cementitious matrix: A promising strengthening technique for concrete structures	94-111
Moradi, Masoud / Valipour, Hamid / Foster, Stephen	Fatigue behaviour of transversely restrained precast steel fibre reinforced concrete slabs in a deconstructable composite deck	516-528
Liao, Yuchao / Tu, Dengyun / Zhou, Jianhui / Zhou, Haibin / Yun, Hong / Gu, Jin / Hu, Chuanshuang	Feasibility of manufacturing cross-laminated timber using fast-grown small diameter eucalyptus lumbers	508-515
Lessard, J.-M. / Omran, A. / Tagnit-Hamou, A. / Gagné, R.	Feasibility of using biomass fly and bottom ashes in dry-cast concrete production	565-577
Zhang, Juhui / Ling, Xiaozheng / Guan, Zhongguo	Finite element modeling of concrete cover crack propagation due to non-uniform corrosion of reinforcement	487-499
Hwang, Vincent / Masters, Amber / Arocho, Marleisa / Hwang, Sangchul	Fly ash-amended pervious concrete pavement followed by bamboo bioretention basin with Dracaena sanderiana for urban stormwater runoff control	161-169
Sun, Daquan / Sun, Guoqiang / Zhu, Xingyi / Pang, Qi / Yu, Fan / Lin, Tianban	Identification of wetting and molecular diffusion stages during self-healing process of asphalt binder via fluorescence microscope	230-239
Balcikanli, Muzeyyen / Turker, Hakan Tacettin / Özbay, Erdoğan / Karahan, Okan / Atis, Cengiz Duran	Identifying the bond and abrasion behavior of alkali activated concretes by central composite design method	196-209
Kuang, Dongliang / Zhang, Ben / Jiao, Yuan / Fang, Jianhong / Chen, Huaxin / Wang, Lu	Impact of particle morphology on aggregate-asphalt interface behavior	142-149
Montero, J. / Laserna, S.	Influence of effective mixing water in recycled concrete	343-352
Bajja, Z. / Dridi, W. / Darquennes, A. / Bennacer, R. / Le Bescop, P. / Rahim, M.	Influence of slurried silica fume on microstructure and tritiated water diffusivity of cement pastes	85-93
Yermak, N. / Pliya, P. / Beaucour, A.-L. / Simon, A. / Noumowe, A.	Influence of steel and/or polypropylene fibres on the behaviour of concrete at high temperature: Spalling, transfer and mechanical properties	240-250
Zhang, Chunmei / Song, Yulong / Wang, Wei / Guo, Xiaoyang / Li, Hui	The influence of sulfonated asphalt on the mechanical properties and microstructure of oil well cement paste	438-445
López Gayarre, Fernando / López Boadella, Íñigo / López-Colina Pérez, Carlos / Serrano López, Miguel / Domingo Cabo, Alberto	Influence of the ceramic recycled agreggates in the masonry mortars properties	457-461
Balapour, Mohammad / Ramezanianpour, Aliakbar / Hajibandeh, Erfan	An investigation on mechanical and durability properties of mortars containing nano and micro RHA	470-477
Esfandiarpour, Saman / Shalaby, Ahmed	Local calibration of creep compliance models of asphalt concrete	313-322
Fallah, Saber / Nematzadeh, Mahdi	Mechanical properties and durability of high-strength concrete containing macro-polymeric and polypropylene fibers with nano-silica and silica fume	170-187
Bai, Xue / He, Minjuan / Ma, Renle / Huang, Dongping / Chen, Junling	Modelling fatigue degradation of the compressive zone of concrete in onshore wind turbine foundations	425-437
Zhang, Jianwu / Guan, Xuemao / Li, Haiyan / Liu, Xiaoxing	Performance and hydration study of ultra-fine sulfoaluminate cement-based double liquid grouting material	262-270
Al-Abdwais, Ahmed / Al-Mahaidi, Riadh / Al-Tamimi, Adil	Performance of NSM CFRP strengthened concrete using modified cement-based adhesive at elevated temperature	296-302
Moffatt, E. G. / Thomas, M. D. A.	Performance of rapid-repair concrete in an aggressive marine environment	478-486
Abbas, Safeer / Kazmi, Syed M. S. / Munir, Muhammad J.	Potential of rice husk ash for mitigating the alkali-silica reaction in mortar bars incorporating reactive aggregates	61-70
Peng, Xiao / Zhou, Yan / Jia, Rui / Wang, Wenjiang / Wu, Yan	Preparation of non-sintered lightweight aggregates from dredged sediments and modification of their properties	9-20
El-Naggar, Mohamed R. / El-Dessouky, Mohamed I.	Re-use of waste glass in improving properties of metakaolin-based geopolymers: Mechanical and microstructure examinations	543-555
Yin, Shi-ping / Na, Ming-wang / Yu, Yu-lin / Wu, Jian	Research on the flexural performance of RC beams strengthened with TRC under the coupling action of load and marine environment	251-261
Pan, Xiaoying / Shi, Zhenguo / Shi, Caijun / Ling, Tung-Chai / Li, Ning	A review on concrete surface treatment Part I: Types and mechanisms	578-590
Iglesias-Campos, Manuel Ángel / Prada Pérez, José Luis / García Fortes, Salvador	Spot analysis to determine technical parameters of microblasting cleaning for building materials maintenance	21-32
Liu, Yong / Hu, Jun / Li, Yu-Ping / Li, Li-Hua	Statistical evaluation of the overall strength of a soil-cement column under axial compression	51-60
Kang, Gyeong-o / Tsuchida, Takashi / Kim, Young-Sang	Strength and stiffness of cement-treated marine dredged clay at various curing stages	71-84
Wang, Chien-Chih / Wang, Her-Yung / Chen, Bo-Tsun / Peng, Ya-Chi	Study on the engineering properties and prediction models of an alkali-activated mortar material containing recycled waste glass	130-141
Cho, Bongsuk / Park, DongCheon / Kim, Jeongho / Hamasaki, Hitoshi	Study on the heat-moisture transfer in concrete under real environment	124-129
Ortlepp, Regine / Ortlepp, Sebastian	Textile reinforced concrete for strengthening of RC columns: A contribution to resource conservation through the preservation of structures	150-160
Hamzah, Meor Othman / Teh, Sek Yee / Golchin, Babak / Voskuilen, Jan	Use of imaging technique and direct tensile test to evaluate moisture damage properties of warm mix asphalt using response surface method	323-334

Über diese
Datenseite
IssueID
22615
Veröffentlicht am:
15.12.2018
Geändert am:
30.06.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - Februar 2017

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - Februar 2017

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.