Construction and Building Materials - Januar 2017

Erschienen:	Januar 2017

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Mu, Ru / Li, Hui / Qing, Longbang / Lin, Jianjun / Zhao, Quanming	Aligning steel fibers in cement mortar using electro-magnetic field	309-316
Zdeb, Tomasz	An analysis of the steam curing and autoclaving process parameters for reactive powder concretes	758-766
Krämer, Christina / Schauerte, Matthias / Müller, Torsten / Gebhard, Sören / Trettin, Reinhard	Application of reinforced three-phase-foams in UHPC foam concrete	746-757
Moradi, M. / Esfahani, M. Reza	Application of the strut-and-tie method for steel fiber reinforced concrete deep beams	423-437
Ababneh, Ayman N. / Al-Rousan, Rajai Z. / Alhassan, Mohammad A. / Sheban, Mashal A.	Assessment of shrinkage-induced cracks in restrained and unrestrained cement-based slabs	371-380
Benzerzour, Mahfoud / Sebaibi, Nassim / Maherzi, Walid / Abriak, Nor Edine / Sebaibi, Yahya	A bibliography on the analytical model of the mechanical behaviour in uniaxial tension of fibre concrete: Application to concrete reinforced with fibres and powders from recycling of thermoset composite materials	214-228
McSwiggan, Ciaran / Fam, Amir	Bio-based resins for flexural strengthening of reinforced concrete beams with FRP sheets	618-629
Liu, Junxiang / Yu, Qingbo / Zuo, Zongliang / Yang, Fan / Duan, Wenjun / Qin, Qin	Blast furnace slag obtained from dry granulation method as a component in slag cement	381-387
Hu, Jianhui / Chen, Wujun / Zhao, Bing / Yang, Deqing	Buildings with ETFE foils: A review on material properties, architectural performance and structural behavior	411-422
Carrasco, E. V. M. / Magalhaes, M. D. C. / Santos, W. J. D. / Alves, R. C. / Mantilla, J. N. R.	Characterization of mortars with iron ore tailings using destructive and nondestructive tests	31-38
Gao, Yin / Qian, Yu / Stoffels, Shelley Marie / Huang, Hai / Liu, Shushu	Characterization of railroad crosstie movements by numerical modeling and field investigation	542-551
Tsioulou, Ourania / Lampropoulos, Andreas / Paschalis, Spyridon	Combined Non-Destructive Testing (NDT) method for the evaluation of the mechanical characteristics of Ultra High Performance Fibre Reinforced Concrete (UHPFRC)	66-77
Karakaş, Ahmet Sertaç / Ortes, Faruk	Comparative assessment of the mechanical properties of asphalt layers under the traffic and environmental conditions	278-290
Luo, Jianlin / Hou, Dongshuai / Li, Qiuyi / Wu, Caifeng / Zhang, Chunwei	Comprehensive performances of carbon nanotube reinforced foam concrete with tetraethyl orthosilicate impregnation	512-516
Rahmani, Eisa / Darabi, Masoud K. / Little, Dallas N. / Masad, Eyad A.	Constitutive modeling of coupled aging-viscoelastic response of asphalt concrete	1-15
Kisku, N. / Joshi, H. / Ansari, M. / Panda, S. K. / Nayak, Sanket / Dutta, Sekhar Chandra	A critical review and assessment for usage of recycled aggregate as sustainable construction material	721-740
	Development and incorporation of lightweight waste-based geopolymer aggregates in mortar and concrete	784-792
Rashid, Ahmad Safuan A. / Shahrin, Muhammad Irfan / Horpibulsuk, Suksun / Hezmi, Muhammad Azril / Yunus, Nor Zurairahetty Mohd / Borhamdin, Suhaila	Development of sustainable masonry units from flood mud soil: Strength and morphology investigations	682-689
Salami, Babatunde Abiodun / Megat Johari, Megat Azmi / Ahmad, Zainal Arifin / Maslehuddin, Mohammad	Durability performance of Palm Oil Fuel Ash-based Engineered Alkaline-activated Cementitious Composite (POFA-EACC) mortar in sulfate environment	229-244
Semianiuk, V. / Tur, V. / Herrador, M. F. / Paredes G., M.	Early age strains and self-stresses of expansive concrete members under uniaxial restraint conditions	39-49
Li, Wengui / Huang, Zhengyu / Hu, Gongqiu / Duan, Wen Hui / Shah, Surendra P.	Early-age shrinkage development of ultra-high-performance concrete under heat curing treatment	767-774
Moran, Richard / Webb, Kelly / Harries, Kent / García, José Jaime	Edge bearing tests to assess the influence of radial gradation on the transverse behavior of bamboo	574-584
Rith, Makara / Kim, Young Kyu / Hong, Seong Jae / Lee, Seung Woo	Effect of horizontal loading on RCC-base composite pavement performance at heavy duty area	741-745
Arel, Hasan Şahan	The effect of lignosulfonates on concretes produced with cements of variable fineness and calcium aluminate content	347-360
Sheng, Jie / Xia, Junwu	Effect of simulated pitting corrosion on the tensile properties of steel	90-100
Li, Huajian / Huang, Fali / Xie, Yongjiang / Yi, Zhonglai / Wang, Zhen	Effect of water–powder ratio on shear thickening response of SCC	585-591
Behfarnia, K. / Rostami, M.	Effects of micro and nanoparticles of SiO 2 on the permeability of alkali activated slag concrete	205-213
Ma, Xianwei / Liu, Jianhui / Wu, Zemei / Shi, Caijun	Effects of SAP on the properties and pore structure of high performance cement-based materials	476-484
Zhu, Yu / Zhang, Haibo / Zhang, Zhaocai / Yao, Yan	Electrochemical impedance spectroscopy (EIS) of hydration process and drying shrinkage for cement paste with W/C of 0.25 affected by high range water reducer	536-541
Micheli, D. / Vricella, A. / Pastore, R. / Delfini, A. / Bueno Morles, R. / Marchetti, M. / Santoni, F. / Bastianelli, L. / Moglie, F. / Mariani Primiani, V. / Corinaldesi, V. / Mazzoli, A. / Donnini, J.	Electromagnetic properties of carbon nanotube reinforced concrete composites for frequency selective shielding structures	267-277
Yin, Wei / Ye, Fen / Lu, Hang	Establishment and experimental verification of stability evaluation model for SBS modified asphalt: Based on quantitative analysis of microstructure	291-302
Seco, A. / Urmeneta, P. / Prieto, E. / Marcelino, S. / García, B. / Miqueleiz, L.	Estimated and real durability of unfired clay bricks: Determining factors and representativeness of the laboratory tests	600-605
Liu, Shengjie / Yu, Xin / Dong, Fuqiang	Evaluation of moisture susceptibility of foamed warm asphalt produced by water injection using surface free energy method	138-145
Yuan, B. / Yu, Q. L. / Brouwers, H. J. H.	Evaluation of slag characteristics on the reaction kinetics and mechanical properties of Na 2 CO 3 activated slag	334-346
Wang, Meng / Fahnestock, Larry A. / Qian, Fengxia / Yang, Weiguo	Experimental cyclic behavior and constitutive modeling of low yield point steels	696-712
Tavakoli, H. R. / Mahmoudi, S. / Goltabar, A. R. / Jalali, P.	Experimental evaluation of the effects of reverse cyclic loading rate on the mechanical behavior of reinforced SCC beams	254-266
Sistani Nezhad, Razieh / Kabir, Mohammad Z.	Experimental investigation on out-of-plane behavior of GFRP retrofitted masonry panels	630-640
Kang, Donghoon / Seo, Kang Seok / Lee, Heeyoung / Chung, Wonseok	Experimental study on mechanical strength of GO-cement composites	303-308
Jie, Sheng / Shi-ping, Yin / Fei, Wang	Experimental study on the fatigue behaviour of RC beams strengthened with TRC after sustained load corrosion	713-720
Obaidi, H. / Gómez-Meijide, B. / Garcia, A.	A fast pothole repair method using asphalt tiles and induction heating	592-599
Mazzoni, Giorgia / Stimilli, Arianna / Cardone, Fabrizio / Canestrari, Francesco	Fatigue, self-healing and thixotropy of bituminous mastics including aged modified bitumens and different filler contents	496-502
Mostafa, Ahmed A. B. / Razaqpur, A. Ghani	Finite element model for predicting post delamination behaviour in FRP-retrofitted beams in flexure	195-204
Goldston, M. W. / Remennikov, A. / Sheikh, M. Neaz	Flexural behaviour of GFRP reinforced high strength and ultra high strength concrete beams	606-617
Pyo, Sukhoon / Kim, Hyeong-Ki	Fresh and hardened properties of ultra-high performance concrete incorporating coal bottom ash and slag powder	459-466
Lu, Jian-xin / Duan, Zhen-hua / Poon, Chi Sun	Fresh properties of cement pastes or mortars incorporating waste glass powder and cullet	793-799
Li, Jiashen / Lu, Ye / Guan, Ruiqi / Qu, Wenzhong	Guided waves for debonding identification in CFRP-reinforced concrete beams	388-399
Wang, Teng / Xue, Yongjie / Zhou, Min / Lv, Yi / Chen, Yuchi / Wu, Shaopeng / Hou, Haobo	Hydration kinetics, freeze-thaw resistance, leaching behavior of blended cement containing co-combustion ash of sewage sludge and rice husk	361-370
Huang, Liang / Sun, Xiaoxun / Yan, Libo / Kasal, Bohumil	Impact behavior of concrete columns confined by both GFRP tube and steel spiral reinforcement	438-448
Yang, Songge / Wang, Jianfeng / Cui, Suping / Liu, Hui / Wang, Xueli	Impact of four kinds of alkanolamines on hydration of steel slag-blended cementitious materials	655-666
Shao, Hongyu / Chen, Binmeng / Li, Bo / Tang, Shengwen / Li, Zongjin	Influence of dispersants on the properties of CNTs reinforced cement-based materials	186-194
Chang, Honglei / Mu, Song / Xie, Deqing / Wang, Penggang	Influence of pore structure and moisture distribution on chloride "maximum phenomenon" in surface layer of specimens exposed to cyclic drying-wetting condition	16-30
Fallahi Abandansari, Hossein / Modarres, Amir	Investigating effects of using nanomaterial on moisture susceptibility of hot-mix asphalt using mechanical and thermodynamic methods	667-675
Wu, Shenghua / Muhunthan, Balasingam / Wen, Haifang	Investigation of effectiveness of prediction of fatigue life for hot mix asphalt blended with recycled concrete aggregate using monotonic fracture testing	50-56
Li, Jing jun / Wan, Chao jun / Niu, Jian gang / Wu, Lin feng / Wu, Yun chao	Investigation on flexural toughness evaluation method of steel fiber reinforced lightweight aggregate concrete	449-458
Song, Shanglin / Hou, Yue / Guo, Meng / Wang, Linbing / Tong, Xinlong / Wu, Jiangfeng	An investigation on the aggregate-shape embedded piezoelectric sensor for civil infrastructure health monitoring	57-65
Fang, Han / Wong, Bill / Bai, Yu	Kinetic modelling of thermophysical properties of shape memory alloys during phase transformation	146-155
Flores Medina, Nelson / Barbero-Barrera, M. Mar	Mechanical and physical enhancement of gypsum composites through a synergic work of polypropylene fiber and recycled isostatic graphite filler	165-177
Esquinas, A. Romero / Ramos, C. / Jiménez, J. R. / Fernández, J. M. / de Brito, J.	Mechanical behaviour of self-compacting concrete made with recovery filler from hot-mix asphalt plants	114-128
Martinho, F. C. G. / Picado-Santos, L. G. / Capitão, S. D.	Mechanical properties of warm-mix asphalt concrete containing different additives and recycled asphalt as constituents applied in real production conditions	78-89
Nematollahi, Behzad / Sanjayan, Jay / Qiu, Jishen / Yang, En-Hua	Micromechanics-based investigation of a sustainable ambient temperature cured one-part strain hardening geopolymer composite	552-563
Wang, Dawei / Liu, Pengfei / Wang, Hao / Ueckermann, Andreas / Oeser, Markus	Modeling and testing of road surface aggregate wearing behaviour	129-137
Vaitkus, Audrius / Vorobjovas, Viktoras / Kleizienė, Rita / Šernas, Ovidijus / Gražulyte, Judita	Modified asphalt mixtures for heavy duty pavement wearing layers	503-511
Liu, Zuguang / An, Xuehui / Li, Shuyang	A nondestructive method for evaluating the impermeability of mortar based on image processing	467-475
Kim, Young Kyu / Lee, Seung Woo	Numerical analysis of debonding mechanism in bonded concrete overlay according to horizontal traffic loading	327-333
Kiani, Behnam / Sajedi, Siavash / Gandomi, Amir H. / Huang, Qindan / Liang, Robert Y.	Optimal adjustment of ACI formula for shrinkage of concrete containing pozzolans	485-495
Jahanian, H. R. / Shafabakhsh, Gh. / Divandari, H.	Performance evaluation of Hot Mix Asphalt (HMA) containing bitumen modified with Gilsonite	156-164
Helson, Olivier / Beaucour, Anne-Lise / Eslami, Javad / Noumowé, Albert / Gotteland, Philippe	Physical and mechanical properties of soilcrete mixtures: Soil clay content and formulation parameters	775-783
Myadraboina, Himabindu / Setunge, Sujeeva / Patnaikuni, Indubhushan	Pozzolanic Index and lime requirement of low calcium fly ashes in high volume fly ash mortar	690-695
González-Taboada, Iris / González-Fonteboa, Belén / Pérez-Ordóñez, Juan Luis / Eiras-López, Javier	Prediction of self-compacting recycled concrete mechanical properties using vibrated recycled concrete experience	641-654
Zhang, Weiguang / Shen, Shihui / Faheem, Ahmed / Basak, Prasanta / Wu, Shenghua / Mohammad, Louay	Predictive quality of the pavement ME design program for field performance of warm mix asphalt pavements	400-410
Lee, Han-Seung / Lim, Hee-Seob / Ismail, Mohamed A.	Quantitative evaluation of free CaO in electric furnace slag using the ethylene glycol method	676-681
Wang, Shifeng / Cheng, Dingxin / Xiao, Feipeng	Recent developments in the application of chemical approaches to rubberized asphalt	101-113
El Mir, Abdulkader / Nehme, Salem G.	Repeatability of the rebound surface hardness of concrete with alteration of concrete parameters	317-326
Abebe, Yared Assefa / Lohaus, Ludger	Rheological characterization of the structural breakdown process to analyze the stability of flowable mortars under vibration	517-525
Tran, H. M. / Scott, A.	Strength and workability of magnesium silicate hydrate binder systems	526-535
Khodair, Yasser / Raza, Mahmood	Sustainable self-consolidating concrete using recycled asphalt pavement and high volume of supplementary cementitious materials	245-253
Lemougna, Patrick N. / Wang, Kai-tuo / Tang, Qing / Cui, Xue-min	Synthesis and characterization of low temperature (<800 °C) ceramics from red mud geopolymer precursor	564-573
Cao, Qi / Cheng, Yinliang / Cao, Mingli / Gao, Quanqing	Workability, strength and shrinkage of fiber reinforced expansive self-consolidating concrete	178-185

Über diese
Datenseite
IssueID
22612
Veröffentlicht am:
14.12.2018
Geändert am:
30.06.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - Januar 2017

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - Januar 2017

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.