Construction and Building Materials - Oktober 2016

Erschienen:	Oktober 2016

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Fernandez, Ignasi / Bairán, Jesús Miguel / Marí, Antonio R.	3D FEM model development from 3D optical measurement technique applied to corroded steel bars	519-532
Thomas, Blessen Skariah / Kumar, Sanjeev / Mehra, Priyansha / Gupta, Ramesh Chandra / Joseph, Miquel / Csetenyi, Laszlo J.	Abrasion resistance of sustainable green concrete containing waste tire rubber particles	906-909
de Fátima Júlio, Maria / Soares, António / Ilharco, Laura M. / Flores-Colen, Inês / de Brito, Jorge	Aerogel-based renders with lightweight aggregates: Correlation between molecular/pore structure and performance	485-495
Kandler, Georg / Lukačević, Markus / Füssl, Josef	An algorithm for the geometric reconstruction of knots within timber boards based on fibre angle measurements	945-960
Li, Peilong / Ding, Zhan / Ma, Li xia / Feng, Zhen gang	Analysis of viscous flow properties of asphalt in aging process	631-638
Delobel, F. / Bulteel, D. / Mechling, J. M. / Lecomte, A. / Cyr, M. / Rémond, S.	Application of ASR tests to recycled concrete aggregates: Influence of water absorption	714-721
Guo, Chengchao / Wang, Fuming / Zhong, Yanhui	Assessing pavement interfacial bonding condition	85-94
Vasanelli, Emilia / Calia, Angela / Colangiuli, Donato / Micelli, Francesco / Aiello, Maria Antonietta	Assessing the reliability of non-destructive and moderately invasive techniques for the evaluation of uniaxial compressive strength of stone masonry units	575-581
Kramar, Sabina / Šajna, Aljoša / Ducman, Vilma	Assessment of alkali activated mortars based on different precursors with regard to their suitability for concrete repair	937-944
Ratiarisoa, Rijaniaina Valéry / Magniont, Camille / Ginestet, Stéphane / Oms, Claire / Escadeillas, Gilles	Assessment of distilled lavender stalks as bioaggregate for building materials: Hygrothermal properties, mechanical performance and chemical interactions with mineral pozzolanic binder	801-815
Lasheen, Mahmoud / Shaat, Amr / Khalil, Ayman	Behaviour of lightweight concrete slabs acting compositely with steel I-sections	967-981
Ozer-Erdogan, Pembe / Basar, H. Merve / Erden, Ibrahim / Tolun, Leyla	Beneficial use of marine dredged materials as a fine aggregate in ready-mixed concrete: Turkey example	690-704
D'Angelo, Giacomo / Thom, Nicholas / Lo Presti, Davide	Bitumen stabilized ballast: A potential solution for railway track-bed	118-126
Monkman, S. / MacDonald, Mark	Carbon dioxide upcycling into industrially produced concrete blocks	127-132
Lilkov, V. / Petrov, O. / Kovacheva, D. / Rostovsky, I. / Tzvetanova, Y. / Petkova, V. / Petrova, N.	Carbonation process in cement with mineral additions of natural zeolite and silica fume – Early hydration period (minutes) up to 24 hours	838-845
Flores Medina, Nelson / Hernández-Olivares, F. / Arroyo, Xabier / Aguilera, Amador / Fernández, F.	Characterization of a more sustainable cement produced with recycled drywall and plasterboards as set retarders	982-991
Zhang, Yanrong / Kong, Xiangming / Gao, Liang / Bai, Yun	Characterization of the mesostructural organization of cement particles in fresh cement paste	1038-1050
Ghabchi, Rouzbeh / Barman, Manik / Singh, Dharamveer / Zaman, Musharraf / Mubaraki, Muhammad Ali	Comparison of laboratory performance of asphalt mixes containing different proportions of RAS and RAP	343-351
Abbaslou, Hakime / Ghanizadeh, Ali Reza / Amlashi, Amir Tavana	The compatibility of bentonite/sepiolite plastic concrete cut-off wall material	1165-1173
Eugene Kim, Kun-Ho / Andrawes, Bassem	Compression behavior of FRP strengthened bridge timber piles subjected to accelerated aging	177-185
Abdelaziz, Salim / Guessasma, Sofiane / Bouaziz, Ahmed / Hamzaoui, Rabah / Beaugrand, Johnny / Souid, Adam Abdulfatah	Date palm spikelet in mortar: Testing and modelling to reveal the mechanical performance	228-236
Øverli, Jan Arve	A density-dependent failure criterion for concrete	566-574
Karthik, Madhu M. / Mander, John B. / Hurlebaus, Stefan	Deterioration data of a large-scale reinforced concrete specimen with severe ASR/DEF deterioration	20-30
Palumbo, M. / Lacasta, A. M. / Holcroft, N. / Shea, A. / Walker, P.	Determination of hygrothermal parameters of experimental and commercial bio-based insulation materials	269-275
Wei, Yu-Ling / Cheng, Chi-Lung	Determination of total Cl in incinerator fly ashes utilized as cement raw materials	544-549
Kuna, Kranthi / Airey, Gordon / Thom, Nick	Development of a tool to assess in-situ curing of Foamed Bitumen Mixtures	55-68
Min, Jiyoung / Lee, Binna / Lee, Jong-Suk	Development of synthetic resin-based mortar for low-activation and neutron shields	992-998
Mavropoulou, N. / Katsiotis, N. / Giannakopoulos, J. / Koutsodontis, K. / Papageorgiou, D. / Chaniotakis, E. / Katsioti, M. / Tsakiridis, P. E.	Durability evaluation of cement exposed to combined action of chloride and sulphate ions at elevated temperature: The role of limestone filler	558-565
Zhang, Mo / Zhao, Mengxuan / Zhang, Guoping / Mann, Derrick / Lumsden, Kevon / Tao, Mingjiang	Durability of red mud-fly ash based geopolymer and leaching behavior of heavy metals in sulfuric acid solutions and deionized water	373-382
Saba, N. / Paridah, M. T. / Abdan, K. / Ibrahim, N. A.	Dynamic mechanical properties of oil palm nano filler/kenaf/epoxy hybrid nanocomposites	133-138
Camarini, Gladis / Pinto, Maria Clara Cavalini / Goulart de Moura, Aline / Manzo, Natalia Reggiani	Effect of citric acid on properties of recycled gypsum plaster to building components	383-390
Choudhary, Antara / Shah, Vineet / Bishnoi, Shashank	Effect of low cost fillers on cement hydration	533-543
Chen, Wei / Li, Bo / Li, Qiu / Tian, Jian	Effect of polyaluminum chloride on the properties and hydration of slag-cement paste	1019-1027
Chen, Xudong / Bu, Jingwu / Xu, Lingyu	Effect of strain rate on post-peak cyclic behavior of concrete in direct tension	746-754
Tang, Yang / Xu, Guobin / Lian, Jijian / Su, Hui / Qu, Chunlai	Effect of temperature and humidity on the adhesion strength and damage mechanism of shotcrete-surrounded rock	1109-1119
Miao, Yinghao / Huang, Yucheng / Zhang, Qunqun / Wang, Linbing	Effect of temperature on resilient modulus and shear strength of unbound granular materials containing fine RAP	1132-1141
Shakya, A. M. / Kodur, V. K. R.	Effect of temperature on the mechanical properties of low relaxation seven-wire prestressing strand	74-84
Dębska, Bernardeta / Lichołai, Lech	The effect of the type of curing agent on selected properties of epoxy mortar modified with PET glycolisate	11-19
Gao, Zhicheng / Liang, Robert Y. / Patnaik, Anil K.	Effects of sustained loading and pre-existing cracks on corrosion behavior of reinforced concrete slabs	776-785
Liu, Qian / Liu, Jiaxiang / Qi, Liqian	Effects of temperature and carbonation curing on the mechanical properties of steel slag-cement binding materials	999-1006
Zhang, Jiupeng / Liu, Guoqiang / Hu, Zhuang / Zhu, Cunzhen / Pei, Jianzhong / Jin, Long	Effects of temperature and loading frequency on asphalt and filler interaction ability	1028-1037
Jeong, Yoseok / Lopez, Maria M. / Bakis, Charles E.	Effects of temperature and sustained loading on the mechanical response of CFRP bonded to concrete	442-452
Moon, Gyu Don / Oh, Sungwoo / Choi, Young Cheol	Effects of the physicochemical properties of fly ash on the compressive strength of high-volume fly ash mortar	1072-1080
Wang, Ying / Hao, Yifei / Hao, Hong / Huang, Xin	An efficient method to derive statistical mechanical properties of concrete reinforced with spiral-shaped steel fibres in dynamic tension	732-745
Han-Seung, Lee / Wang, Xiao-Yong	Evaluation of compressive strength development and carbonation depth of high volume slag-blended concrete	45-54
Gao, Yun / Wu, Kai / Jiang, Jinyang	Examination and modeling of fractality for pore-solid structure in cement paste: Starting from the mercury intrusion porosimetry test	237-243
Mohammed, Hasan Jasim / Zain, M. F. M.	Experimental application of EPS concrete in the new prototype design of the concrete barrier	312-342
Al-Bayati, G. / Al-Mahaidi, R. / Kalfat, R.	Experimental investigation into the use of NSM FRP to increase the torsional resistance of RC beams using epoxy resins and cement-based adhesives	1153-1164
Lund, M. S. M. / Hansen, K. K. / Hertz, K. D.	Experimental investigation of different fill materials in arch bridges with particular focus on Pearl-Chain Bridges	922-936
Xu, Bin / Chen, Jingyun / Li, Mingliang / Cao, Dongwei / Ping, Shujiang / Zhang, Yanjun / Wang, Weiying	Experimental investigation of preventive maintenance materials of porous asphalt mixture based on high viscosity modified bitumen	681-689
Dubey, Rahul / Kumar, Pardeep	Experimental study of the effectiveness of retrofitting RC cylindrical columns using self-compacting concrete jackets	104-117
Chen, Zongwu / Wu, Shaopeng / Xiao, Yue / Zhao, Meiling / Xie, Jun	Feasibility study of BOF slag containing honeycomb particles in asphalt mixture	550-557
Zhou, Juanlan / Zheng, Mulian / Wang, Qi / Yang, Jiangang / Lin, Tianfa	Flexural fatigue behavior of polymer-modified pervious concrete with single sized aggregates	897-905
Liu, Zhichao / Hansen, Will	A geometrical model for void saturation in air-entrained concrete under continuous water exposure	475-484
Aicher, Simon / Hirsch, Maren / Christian, Zachary	Hybrid cross-laminated timber plates with beech wood cross-layers	1007-1018
Haddad, Rami H.	Hybrid repair configurations with CFRP composites for recovering structural performance of steel-corroded beams	508-518
Elakneswaran, Yogarajah / Owaki, Eiji / Miyahara, Shigeyoshi / Ogino, Masataka / Maruya, Tsuyoshi / Nawa, Toyoharu	Hydration study of slag-blended cement based on thermodynamic considerations	615-625
Alghamri, R. / Kanellopoulos, A. / Al-Tabbaa, A.	Impregnation and encapsulation of lightweight aggregates for self-healing concrete	910-921
Moraes, J. C. B. / Tashima, M. M. / Akasaki, J. L. / Melges, J. L. P. / Monzó, J. / Borrachero, M. V. / Soriano, L. / Payá, J.	Increasing the sustainability of alkali-activated binders: The use of sugar cane straw ash (SCSA)	148-154
Saridemir, M. / Severcan, M. H. / Ciflikli, M. / Celikten, S. / Ozcan, F. / Atis, C. D.	The influence of elevated temperature on strength and microstructure of high strength concrete containing ground pumice and metakaolin	244-257
Velay-Lizancos, Mirian / Martínez-Lage, Isabel / Azenha, Miguel / Vazquez-Burgo, Pablo	Influence of temperature in the evolution of compressive strength and in its correlations with UPV in eco-concretes with recycled materials	276-286
Verbruggen, Hilke / Terryn, Herman / De Graeve, Iris	Inhibitor evaluation in different simulated concrete pore solution for the protection of steel rebars	887-896
Kockal, Niyazi Ugur	Investigation about the effect of different fine aggregates on physical, mechanical and thermal properties of mortars	816-825
Li, Shuangxin / Jones, Benoît / Thorpe, Roger / Davis, Martin	An investigation into the thermal conductivity of hydrating sprayed concrete	363-372
Erdem, Emin / Güngörmüş, Hakan / Kılınçarslan, Rafet	The investigation of some properties of cement and removal of water soluble toxic chromium(VI) ion in cement by means of different reducing agents	626-630
Friedrich, Daniel / Luible, Andreas	Investigations on ageing of wood-plastic composites for outdoor applications: A meta-analysis using empiric data derived from diverse weathering trials	1142-1152
Wang, Zhenjun / Wang, Hongfei / An, Dengdeng / Ai, Tao / Zhao, Peng	Laboratory investigation on deicing characteristics of asphalt mixtures using magnetite aggregate as microwave-absorbing materials	589-597
Peach, B. / Petkovski, M. / Blackburn, J. / Engelberg, D. L.	Laser scabbling of mortars	37-44
Vieira, Darli Rodrigues / Calmon, João Luiz / Coelho, Felipe Zanellato	Life cycle assessment (LCA) applied to the manufacturing of common and ecological concrete: A review	656-666
Gunasekara, Chamila / Law, David W. / Setunge, Sujeeva	Long term permeation properties of different fly ash geopolymer concretes	352-362
Bouteiller, Véronique / Marie-Victoire, Elisabeth / Crémona, Christian	Mathematical relation of steel thickness loss with time related to reinforced concrete contaminated by chlorides	764-775
Wang, Zhiheng / Wang, Yunlu / Cao, Yu / Wang, Zheng	Measurement of shear modulus of materials based on the torsional mode of cantilever plate	1059-1071
Branston, John / Das, Sreekanta / Kenno, Sara Y. / Taylor, Craig	Mechanical behaviour of basalt fibre reinforced concrete	878-886
Yankwa Djobo, Jean Noël / Elimbi, Antoine / Tchakouté, Hervé Kouamo / Kumar, Sanjay	Mechanical properties and durability of volcanic ash based geopolymer mortars	606-614
Colotti, Vincenzo	Mechanical shear strength model for reinforced concrete beams strengthened with FRP materials	855-865
Liu, Simeng / Zhang, Liangliang / Chen, Zengshun / Zhou, Jianting / Zhu, Chao	Mode-specific damage identification method for reinforced concrete beams: Concept, theory and experiments	1090-1099
Al-Abdwais, Ahmed / Al-Mahaidi, Riadh	Modified cement-based adhesive for near-surface mounted CFRP strengthening system	794-800
Gołaszewski, Jacek / Kostrzanowska-Siedlarz, Aleksandra / Cygan, Grzegorz / Drewniok, Michał	Mortar as a model to predict self-compacting concrete rheological properties as a function of time and temperature	1100-1108
Hanif, Muhammad Usman / Ibrahim, Zainah / Jameel, Mohammed / Ghaedi, Khaled / Aslam, Muhammad	A new approach to estimate damage in concrete beams using non-linearity	1081-1089
Dulaimi, Anmar / Nageim, Hassan Al / Ruddock, Felicite / Seton, Linda	New developments with cold asphalt concrete binder course mixtures containing binary blended cementitious filler (BBCF)	414-423
Fourmentin, M. / Faure, P. / Pelupessy, P. / Sarou-Kanian, V. / Peter, U. / Lesueur, D. / Rodts, S. / Daviller, D. / Coussot, P.	NMR and MRI observation of water absorption/uptake in hemp shives used for hemp concrete	405-413
Aydin, Ertug	Novel coal bottom ash waste composites for sustainable construction	582-588
Duan, Ping / Yan, Chunjie / Luo, Wenjun	A novel waterproof, fast setting and high early strength repair material derived from metakaolin geopolymer	69-73
Monaco, Alessia	Numerical prediction of the shear response of semi-prefabricated steel-concrete trussed beams	462-474
Raffoul, Samar / Garcia, Reyes / Pilakoutas, Kypros / Guadagnini, Maurizio / Flores Medina, Nelson	Optimisation of rubberised concrete with high rubber content: An experimental investigation	391-404
Boudali, S. / Kerdal, D. E. / Ayed, K. / Abdulsalam, B. / Soliman, A. M.	Performance of self-compacting concrete incorporating recycled concrete fines and aggregate exposed to sulphate attack	705-713
Yang, Dong-Hui / Li, Guo-Ping / Yi, Ting-Hua / Li, Hong-Nan	A performance-based service life design method for reinforced concrete structures under chloride environment	453-461
Lopez-Arce, P. / Tagnit-Hammou, M. / Menéndez, B. / Mertz, J. D. / Guiavarc'h, M. / Kaci, A. / Aggoun, S. / Cousture, A.	Physico-chemical stone-mortar compatibility of commercial stone-repair mortars of historic buildings from Paris	424-441
Kronlund, Dennis / Lindén, Mika / Smått, Jan-Henrik	A polydimethylsiloxane coating to minimize weathering effects on granite	1051-1058
Mármol, Gonzalo / Savastano, Holmer / Monzó, José María / Borrachero, María Victoria / Soriano, Lourdes / Payá, Jordi	Portland cement, gypsum and fly ash binder systems characterization for lignocellulosic fiber-cement	208-218
Lopes, Manuela / Mouillet, Virginie / Bernucci, Liedi / Gabet, Thomas	The potential of Attenuated Total Reflection imaging in the mid-infrared for the study of recycled asphalt mixtures	1120-1131
Ghasemzadeh, Farnam / Manafpour, Amir / Sajedi, Siavash / Shekarchi, Mohammad / Hatami, Mona	Predicting long-term compressive creep of concrete using inverse analysis method	496-507
Zhu, Xingji / Zi, Goangseup / Lee, Wonwoo / Kim, Soye / Kong, Jungsik	Probabilistic analysis of reinforcement corrosion due to the combined action of carbonation and chloride ingress in concrete	667-680
Ferdous, Wahid / Manalo, Allan / Aravinthan, Thiru / Van Erp, Gerard	Properties of epoxy polymer concrete matrix: Effect of resin-to-filler ratio and determination of optimal mix for composite railway sleepers	287-300
Silva, Yimmy Fernando / Robayo, Rafael Andres / Mattey, Pedro Enrique / Delvasto, Silvio	Properties of self-compacting concrete on fresh and hardened with residue of masonry and recycled concrete	639-644
Liu, Yufeng / Sun, Wenjuan / Nair, Harikrishnan / Stephen Lane, D. / Wang, Linbing	Quantification of aggregate morphologic characteristics with the correlation to uncompacted void content of coarse aggregates in Virginia	645-655
Bhagath Singh, G. V. P. / Subramaniam, Kolluru V. L.	Quantitative XRD study of amorphous phase in alkali activated low calcium siliceous fly ash	139-147
Yuan, Qiang / Long, Guangcheng / Liu, Zanqun / Ma, Kunlin / Xie, Youjun / Deng, Dehua / Huang, Hai	Sealed-space-filling SCC: A special SCC applied in high-speed rail of China	167-176
Zagon, Raul / Matthys, Stijn / Kiss, Zoltan	Shear behaviour of SFR-UHPC I-shaped beams	258-268
Garcia, T. / Blanco, A. / Cavalaro, S. H. P.	Shear behaviour of sprayed concrete	722-731
Wang, Weibiao / Höeg, Kaare	Simplified material model for analysis of asphalt core in embankment dams	199-207
Ghizdăveț, Zeno / Ștefan, Bianca-Maria / Nastac, Daniela / Vasile, Ovidiu / Bratu, Mihai	Sound absorbing materials made by embedding crumb rubber waste in a concrete matrix	755-763
Wang, Xuebing / Pan, Zhihua / Shen, Xiaodong / Liu, Weiqing	Stability and decomposition mechanism of ettringite in presence of ammonium sulfate solution	786-793
Kumar, Varinder / Patel, P. V.	Strengthening of axially loaded circular concrete columns using stainless steel wire mesh (SSWM) – Experimental investigations	186-198
Yan, Chuanqi / Huang, Weidong / Lv, Quan	Study on bond properties between RAP aggregates and virgin asphalt using Binder Bond Strength test and Fourier Transform Infrared spectroscopy	1-10
Xu, Bin / Chen, Jingyun / Zhou, Changhong / Wang, Weiying	Study on Marshall Design parameters of porous asphalt mixture using limestone as coarse aggregate	846-854
Sore, Seick Omar / Messan, Adamah / Prud'homme, Elodie / Escadeillas, Gilles / Tsobnang, François	Synthesis and characterization of geopolymer binders based on local materials from Burkina Faso – Metakaolin and rice husk ash	301-311
Sturm, P. / Gluth, G. J. G. / Brouwers, H. J. H. / Kühne, H.-C.	Synthesizing one-part geopolymers from rice husk ash	961-966
Seo, Soo-Yeon / Nam, Bo-Ram / Kim, Sang-Koo	Tensile strength of the grout-filled head-splice-sleeve	155-166
Itani, Hayssam / Saad, George / Chehab, Ghassan	The use of geogrid reinforcement for enhancing the performance of concrete overlays: An experimental and numerical assessment	826-837
Coletti, Chiara / Maritan, Lara / Cultrone, Giuseppe / Mazzoli, Claudio	Use of industrial ceramic sludge in brick production: Effect on aesthetic quality and physical properties	219-227
Kim, Young-Sang / Do, Tan Manh / Kim, Hyeong-Ki / Kang, Gyeongo	Utilization of excavated soil in coal ash-based controlled low strength material (CLSM)	598-605
Zheng, Juanrong / Zhu, Yalan / Zhao, Zhenbo	Utilization of limestone powder and water-reducing admixture in cemented paste backfill of coarse copper mine tailings	31-36
Aliabdo, Ali A. / Abd Elmoaty, Abd Elmoaty M. / Aboshama, Ahmed Y.	Utilization of waste glass powder in the production of cement and concrete	866-877
Asghari, Azadehalsadat A. / Ley Hernandez, Aida Margarita / Feys, Dimitri / De Schutter, Geert	Which parameters, other than the water content, influence the robustness of cement paste with SCC consistency?	95-103

Über diese
Datenseite
IssueID
22601
Veröffentlicht am:
15.12.2018
Geändert am:
30.06.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - Oktober 2016

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - Oktober 2016

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.