Construction and Building Materials - Juni 2016

Erschienen:	Juni 2016

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Anjan Kumar, Siddagangaiah / Aldouri, Raed / Nazarian, Soheil / Si, Jimmy	Accelerated assessment of quality of compacted geomaterials with intelligent compaction technology	824-834
Biscaia, Hugo C. / Cruz, David / Chastre, Carlos	Analysis of the debonding process of CFRP-to-timber interfaces	96-112
Kaffetzakis, Michael I. / Papanicolaou, Catherine G.	Bond behavior of reinforcement in Lightweight Aggregate Self-Compacting Concrete	641-652
El-Nemr, Amr / Ahmed, Ehab A. / Barris, Cristina / Benmokrane, Brahim	Bond-dependent coefficient of glass- and carbon-FRP bars in normal- and high-strength concretes	77-89
Xuan, Dongxing / Zhan, Baojian / Poon, Chi Sun / Zheng, Wei	Carbon dioxide sequestration of concrete slurry waste and its valorisation in construction products	664-672
Bost, Pascal / Regnier, Marine / Horgnies, Matthieu	Comparison of the accelerating effect of various additions on the early hydration of Portland cement	290-296
Habal, Ayyanna / Singh, Dharamveer	Comparison of Wilhelmy plate and Sessile drop methods to rank moisture damage susceptibility of asphalt – Aggregates combinations	351-358
Zhang, Zuhua / Li, Liangfeng / Ma, Xue / Wang, Hao	Compositional, microstructural and mechanical properties of ambient condition cured alkali-activated cement	237-245
Carpio, Manuel / Roldán-Fontana, Julio / Pacheco-Torres, Rosalía / Ordoñez, Javier	Construction waste estimation depending on urban planning options in the design stage of residential buildings	561-570
Belhadj, B. / Bederina, M. / Makhloufi, Z. / Dheilly, R. M. / Montrelay, N. / Queneudec, M.	Contribution to the development of a sand concrete lightened by the addition of barley straws	513-522
Ghanooni-Bagha, M. / Shayanfar, M. A. / Shirzadi-Javid, A. A. / Ziaadiny, H.	Corrosion-induced reduction in compressive strength of self-compacting concretes containing mineral admixtures	221-228
Perri, Francesco / Faella, Ciro / Martinelli, Enzo	Cost-competitive hysteretic devices for seismic energy dissipation in steel bracings: experimental tests and low-cycle fatigue characterisation	57-67
Wu, Huanyu / Duan, Huabo / Zheng, Lina / Wang, Jiayuan / Niu, Yongning / Zhang, Guomin	Demolition waste generation and recycling potentials in a rapidly developing flagship megacity of South China: Prospective scenarios and implications	1007-1016
Zhang, Duo / Shao, Yixin	Early age carbonation curing for precast reinforced concretes	134-143
Kakade, Vijay B. / Reddy, M. Amaranatha / Reddy, K. Sudhakar	Effect of aging on fatigue performance of hydrated lime modified bituminous mixes	1034-1043
Liu, Rong / Jiang, Linhua / huang, Guohong / Zhu, Yeran / Liu, Xingrong / Chu, Hongqiang / Xiong, Chuangsheng	The effect of carbonate and sulfate ions on chloride threshold level of reinforcement corrosion in mortar with/without fly ash	90-95
Han, Qinghua / Wang, Lichen / Xu, Jie	Effect of chamfering of cable clamp plate on shear behaviour of CFRP tendons	324-333
Chithra, S. / Kumar, S. R. R. Senthil / Chinnaraju, K.	The effect of Colloidal Nano-silica on workability, mechanical and durability properties of High Performance Concrete with Copper slag as partial fine aggregate	794-804
Finken, Gholam Reza / Bjarløv, Søren Peter / Peuhkuri, Ruut Hannele	Effect of façade impregnation on feasibility of capillary active thermal internal insulation for a historic dormitory – A hygrothermal simulation study	202-214
Siad, Hocine / Lachemi, Mohamed / Şahmaran, Mustafa / Hossain, Khandaker M. Anwar	Effect of glass powder on sulfuric acid resistance of cementitious materials	163-173
Sallı Bideci, Özlem	The effect of high temperature on lightweight concretes produced with colemanite coated pumice aggregates	631-640
Huang, Qingliang / Zhou, Xiangming / Zhuang, Liping / Gong, Chenchen / Lu, Lingchao / Fu, Xinghua	Effects of carbamide on sulfoaluminate cement paste for growing plants	229-236
Zhang, Ge / Li, Guoxin	Effects of mineral admixtures and additional gypsum on the expansion performance of sulphoaluminate expansive agent at simulation of mass concrete environment	970-978
AzariJafari, Hessam / Kazemian, Ali / Rahimi, Motahareh / Yahia, Ammar	Effects of pre-soaked super absorbent polymers on fresh and hardened properties of self-consolidating lightweight concrete	215-220
Autelitano, Federico / Giuliani, Felice	Electric arc furnace slags in cement-treated materials for road construction: Mechanical and durability properties	280-289
Bakeer, Tammam	Empirical estimation of the load bearing capacity of masonry walls under buckling – Critical remarks and a new proposal for the Eurocode 6	376-394
Jeong, Gi Young / Park, Moon Jae	Evaluate orthotropic properties of wood using digital image correlation	864-869
Zanetti, Maria Chiara / Santagata, Ezio / Fiore, Silvia / Ruffino, Barbara / Dalmazzo, Davide / Lanotte, Michele	Evaluation of potential gaseous emissions of asphalt rubber bituminous mixtures. Proposal of a new laboratory test procedure	870-879
Ashish, Prabin Kumar / Singh, Dharamveer / Bohm, Siva	Evaluation of rutting, fatigue and moisture damage performance of nanoclay modified asphalt binder	341-350
Al-Allaf, Mustafa Hameed / Weekes, Laurence / Augusthus-Nelson, Levingshan / Leach, Philip	An experimental investigation into the bond-slip behaviour between CFRP composite and lightweight concrete	15-27
Shen, Dejian / Shi, Xiang / Zhang, Hui / Duan, Xiaofang / Jiang, Guoqing	Experimental study of early-age bond behavior between high strength concrete and steel bars using a pull-out test	653-663
Opara, Karol R. / Skakuj, Marek / Stöckner, Markus	Factors affecting raveling of motorway pavements—A field experiment with new additives to the deicing brine	174-187
Lee, Seong-Cheol / Oh, Joung-Hwan / Cho, Jae-Yeol	Fiber efficiency in SFRC members subjected to uniaxial tension	479-487
Brake, Nicholas A. / Allahdadi, Hamid / Adam, Fatih	Flexural strength and fracture size effects of pervious concrete	536-543
Ma, Dechong / Zhao, Duijia / Zhao, Jingzhe / Du, Sujun / Pang, Jinyu / Wang, Wei / Fan, Changxin	Functionalization of reclaimed polyethylene with maleic anhydride and its application in improving the high temperature stability of asphalt mixtures	596-602
Aqel, M. / Panesar, D. K.	Hydration kinetics and compressive strength of steam-cured cement pastes and mortars containing limestone filler	359-368
Tang, S. W. / Cai, X. H. / He, Z. / Shao, H. Y. / Li, Z. J. / Chen, E.	Hydration process of fly ash blended cement pastes by impedance measurement	939-950
Choi, Sunmi / Kim, Jin-Man / Han, Dongyeop / Kim, Ji-Ho	Hydration properties of ladle furnace slag powder rapidly cooled by air	682-690
Straže, Aleš / Fajdiga, Gorazd / Pervan, Stjepan / Gorišek, Željko	Hygro-mechanical behavior of thermally treated beech subjected to compression loads	28-33
Song, Zijian / Jiang, Linhua / Li, Wei / Xiong, Chuansheng / Chu, Hongqiang	Impact of compressive fatigue on chloride diffusion coefficient in OPC concrete: An analysis using EIS method	712-720
Wu, Chao / Bai, Yu / Kwon, Sukmin	Improved bond behavior between GFRP rebar and concrete using calcium sulfoaluminate	897-904
Hou, Pengkun / Zhang, Rui / Cai, Yamei / Cheng, Xin / Shah, Surendra P.	In situ Ca(OH) 2 consumption of TEOS on the surface of hardened cement-based materials and its improving effects on the Ca-leaching and sulfate-attack resistivity	890-896
Ding, Yining / Zhang, Cong / Cao, Mingli / Zhang, Yulin / Azevedo, Cecília	Influence of different fibers on the change of pore pressure of self-consolidating concrete exposed to fire	456-469
Khaloo, Alireza / Mobini, Mohammad Hossein / Hosseini, Payam	Influence of different types of nano-SiO 2 particles on properties of high-performance concrete	188-201
Xie, Xiaoli / Gou, Guangjun / Wei, Xiao / Zhou, Zuowan / Jiang, Man / Xu, Xiaoling / Wang, Zeyong / Hui, David	Influence of pretreatment of rice straw on hydration of straw fiber filled cement based composites	449-455
Señas, Lilia / Priano, Carla / Marfil, Silvina	Influence of recycled aggregates on properties of self-consolidating concretes	498-505
Burciaga-Díaz, Oswaldo / Gómez-Zamorano, Lauren Y. / Escalante-García, José Iván	Influence of the long term curing temperature on the hydration of alkaline binders of blast furnace slag-metakaolin	917-926
Xiong, Chuansheng / Jiang, Linhua / Xu, Yi / Song, Zijian / Chu, Hongqiang / Guo, Qingxiang	Influences of exposure condition and sulfate salt type on deterioration of paste with and without fly ash	951-963
Jin, Zuquan / Zhao, Xia / Zhao, Tiejun / Yang, Li	Interaction between compressive load and corrosive-ion attack on reinforced concrete with accelerated potentiostatic corrosion	805-814
Pan, Xiaoying / Shi, Zhenguo / Shi, Caijun / Hu, Xiang / Wu, Linmei	Interactions between inorganic surface treatment agents and matrix of Portland cement-based materials	721-731
Apay, Ahmet Celal / Özgan, Ercan / Turgay, Tahsin / Akyol, Kevser	Investigation and modelling the effects of water proofing and water repellent admixtures dosage on the permeability and compressive strengths of concrete	698-711
Zhao, Li / Guo, Xinli / Ge, Chuang / Li, Qi / Guo, Liping / Shu, Xin / Liu, Jiaping	Investigation of the effectiveness of PC@GO on the reinforcement for cement composites	470-478
Tang, Jin / Liu, Quantao / Wu, Shaopeng / Ye, Qunshan / Sun, Yihan / Schlangen, Erik	Investigation of the optimal self-healing temperatures and healing time of asphalt binders	1029-1033
Cong, Peiliang / Zhang, Yihan / Liu, Ning	Investigation of the properties of asphalt mixtures incorporating reclaimed SBS modified asphalt pavement	334-340
Huang, Weidong / Lv, Quan / Xiao, Feipeng	Investigation of using binder bond strength test to evaluate adhesion and self-healing properties of modified asphalt binders	49-56
Zhu, Peng / Mao, XinQi / Qu, Wenjun / Li, Zongyang / Ma, Zhongguo John	Investigation of using recycled powder from waste of clay bricks and cement solids in reactive powder concrete	246-254
Goyal, Reema / Mukherjee, Abhijit / Goyal, Shweta	An investigation on bond between FRP stay-in-place formwork and concrete	741-751
Chenari, Reza Jamshidi / Fard, Mehran Karimpour / Pourghaffar Maghfarati, Sabina / Pishgar, Faranak / Lemos Machado, Sandro	An investigation on the geotechnical properties of sand–EPS mixture using large oedometer apparatus	773-782
Moretti, Juliana P. / Sales, Almir / Almeida, Fernando C. R. / Rezende, Mariana A. M. / Gromboni, Pedro P.	Joint use of construction waste (CW) and sugarcane bagasse ash sand (SBAS) in concrete	317-323
Seifi, S. / Diatta-Dieme, M. T. / Blanchart, P. / Lecomte-nana, G. L. / Kobor, D. / Petit, S.	Kaolin intercalated by urea. Ceramic applications	579-585
Cong, Lin / Zhang, Yanning / Xiao, Feipeng / Wei, Qiang	Laboratory and field investigations of permeability and surface temperature of asphalt pavement by infrared thermal method	442-448
Abdullah, Mohd Ezree / Hainin, Mohd Rosli / Yusoff, Nur Izzi Md. / Zamhari, Kemas Ahmad / Hassan, Norhidayah	Laboratory evaluation on the characteristics and pollutant emissions of nanoclay and chemical warm mix asphalt modified binders	488-497
Huang, Ming / Huang, Weidong	Laboratory investigation on fatigue performance of modified asphalt concretes considering healing	68-76
Yu, Xiaoniu / Qian, Chunxiang / Xue, Bin	Loose sand particles cemented by different bio-phosphate and carbonate composite cement	571-578
Nepomuceno, Miguel C. S. / Pereira-de-Oliveira, L. A. / Lopes, S. M. R. / Franco, R. M. C.	Maximum coarse aggregate's volume fraction in self-compacting concrete for different flow restrictions	851-856
Nabiun, Navid / Khabiri, Mohammad Mehdi	Mechanical and moisture susceptibility properties of HMA containing ferrite for their use in magnetic asphalt	691-697
Moreno-Navarro, F. / Iglesias, G. R. / Rubio-Gámez, M. C.	Mechanical performance of mechanomutable asphalt binders under cyclic creep and recovery loads	506-512
Lee, N. K. / Kim, E. M. / Lee, H. K.	Mechanical properties and setting characteristics of geopolymer mortar using styrene-butadiene (SB) latex	264-272
Kupwade-Patil, Kunal / Al-Aibani, Anfal F. / Abdulsalam, Mohammad F. / Mao, Cheahuychou / Bumajdad, Ali / Palkovic, Steven D. / Büyüköztürk, Oral	Microstructure of cement paste with natural pozzolanic volcanic ash and Portland cement at different stages of curing	423-441
Khabaz, Amjad	Monitoring of impact of hooked ends on mechanical behavior of steel fiber in concrete	857-863
Sadowski, Łukasz / Mathia, Thomas G.	Multi-scale metrology of concrete surface morphology: Fundamentals and specificity	613-621
Taffese, Woubishet Zewdu / Sistonen, Esko	Neural network based hygrothermal prediction for deterioration risk analysis of surface-protected concrete façade element	34-48
Alwash, Maitham / Sbartaï, Zoubir Mehdi / Breysse, Denys	Non-destructive assessment of both mean strength and variability of concrete: A new bi-objective approach	880-889
Goetzke-Pala, Adelajda / Hoła, Jerzy / Sadowski, Łukasz	Non-destructive neural identification of the moisture content of saline ceramic bricks	144-152
Gencel, Osman / del Coz Díaz, Juan José / Sutcu, Mucahit / Köksal, Fuat / Álvarez Rabanal, Felipe Pedro / Martínez-Barrera, Gonzalo	A novel lightweight gypsum composite with diatomite and polypropylene fibers	732-740
Shaheen, Magdy / Al-Mayah, Adil / Tighe, Susan	A novel method for evaluating hot mix asphalt fatigue damage: X-ray computed tomography	121-133
Shan, Liyan / Xu, Yanan / He, Hongsen / Ren, Nanqi	Optimization criterion of viscoelastic response model for asphalt binders	553-560
Ghaharpour, Fatemeh / Bahari, Ali / Abbasi, Majid / Ashkarran, Ali Akbar	Parametric investigation of CNT deposition on cement by CVD process	523-535
Djobo, Y. J. N. / Elimbi, A. / Dika Manga, J. / Djon Li Ndjock, I. B.	Partial replacement of volcanic ash by bauxite and calcined oyster shell in the synthesis of volcanic ash-based geopolymers	673-681
Lee, Seong-Hyeok / Choi, Yeong-Tae / Lee, Hyun-Min / Park, Dae-Wook	Performance evaluation of directly fastened asphalt track using a full-scale test	404-414
Lee, Han-Seung / Singh, Jitendra Kumar / Park, Jang Hyun	Pore blocking characteristics of corrosion products formed on Aluminum coating produced by arc thermal metal spray process in 3.5 wt.% NaCl solution	905-916
El-Alfi, E. A. / Gado, R. A.	Preparation of calcium sulfoaluminate-belite cement from marble sludge waste	764-772
Wang, Kai / Qian, Chunxiang / Wang, Ruixing	The properties and mechanism of microbial mineralized steel slag bricks	815-823
Ma, Cong / Chen, Bing	Properties of magnesium phosphate cement containing redispersible polymer powder	255-263
Mohan, Varenya Kumar D. / Kim, Hobi / Balunaini, Umashankar / Prezzi, Monica	Pullout capacity of ladder-type metal reinforcements in tire shred-sand mixtures	544-552
Sun, Wei / Wu, Aixiang / Hou, Kepeng / Yang, Yi / Liu, Lei / Wen, Yiming	Real-time observation of meso-fracture process in backfill body during mine subsidence using X-ray CT under uniaxial compressive conditions	153-162
Nagrockienė, Džigita / Girskas, Giedrius	Research into the properties of concrete modified with natural zeolite addition	964-969
Moreno-Navarro, F. / Rubio-Gámez, M. C.	A review of fatigue damage in bituminous mixtures: Understanding the phenomenon from a new perspective	927-938
Güneyisi, Erhan / Gesoǧlu, Mehmet / Algin, Zeynep / Yazıcı, Halit	Rheological and fresh properties of self-compacting concretes containing coarse and fine recycled concrete aggregates	622-630
Yao, Hui / Dai, Qingli / You, Zhanping / Ye, Mingxiao / Yap, Yoke Khin	Rheological properties, low-temperature cracking resistance, and optical performance of exfoliated graphite nanoplatelets modified asphalt binder	988-996
Etxeberria, Miren / Fernandez, Jesus Manuel / Limeira, Jussara	Secondary aggregates and seawater employment for sustainable concrete dyke blocks production: Case study	586-595
Akcay, Cemil / Bozkurt, Tarık Serhat / Sayin, Baris / Yildizlar, Baris	Seismic retrofitting of the historical masonry structures using numerical approach	752-763
Zhao, Jihui / Wang, Dongmin / Yan, Peiyu / Zhang, Dawang / Wang, Hao	Self-cementitious property of steel slag powder blended with gypsum	835-842
Darquennes, A. / Olivier, K. / Benboudjema, F. / Gagné, R.	Self-healing at early-age, a way to improve the chloride resistance of blast-furnace slag cementitious materials	1017-1028
Pang, Long / Li, Quanwang	Service life prediction of RC structures in marine environment using long term chloride ingress data: Comparison between exposure trials and real structure surveys	979-987
Ahn, Hyung Jun / Lee, Jusang	Short-term evaluation of crack sealing and filling	843-850
Leung, H. Y. / Kim, J. / Nadeem, A. / Jaganathan, Jayaprakash / Anwar, M. P.	Sorptivity of self-compacting concrete containing fly ash and silica fume	369-375
Hu, Chuanlin / Gao, Yueyi / Zhang, Yamei / Li, Zongjin	Statistical nanoindentation technique in application to hardened cement pastes: Influences of material microstructure and analysis method	306-316
Kubat, Thamer / Al-Mahaidi, Riadh / Shayan, Ahmad	Strain development in CFRP-wrapped circular concrete columns affected by alkali-aggregate reaction	603-612
Limbachiya, Vireen / Ganjian, Eshmaiel / Claisse, Peter	Strength, durability and leaching properties of concrete paving blocks incorporating GGBS and SF	273-279
Ciancio, Daniela / Manca, Mirko / Buratti, Nicola / Mazzotti, Claudio	Structural and material properties of Mini notched Round Determinate Panels	395-403
Wang, Her-Yung / Wang, Chien-Chih / Chang, Shu-Chuan / Lin, Jhan-Cyue	A study of engineering and electricity properties of cement mortar added with recycled materials and piezoelectric powders	297-305
Gebregziabiher, Berhan Seium / Thomas, Robert J. / Peethamparan, Sulapha	Temperature and activator effect on early-age reaction kinetics of alkali-activated slag binders	783-793
Dong, Biqin / Zhang, Jianchao / Liu, Yuqing / Fang, Guohao / Ding, Zhu / Xing, Feng	Tracing hydration feature of aluminophosphate cementitious materials by means of electrochemical impedance method	997-1006
Ren, G. M. / Wu, H. / Fang, Q. / Liu, J. Z. / Gong, Z. M.	Triaxial compressive behavior of UHPCC and applications in the projectile impact analyses	1-14
Guo, Shuaicheng / Dai, Qingli / Sun, Xiao / Sun, Ye	Ultrasonic scattering measurement of air void size distribution in hardened concrete samples	415-422
Aïssoun, B. / Khayat, K. / Gallias, J.-L.	Variations of sorptivity with rheological properties of concrete cover in self-consolidating concrete	113-120

Über diese
Datenseite
IssueID
22598
Veröffentlicht am:
15.12.2018
Geändert am:
30.06.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - Juni 2016

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - Juni 2016

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.