Construction and Building Materials - März 2016

Erschienen:	März 2016

Autor(en)	Titel	Seite(n)
Thong, C. C. / Teo, D. C. L. / Ng, C. K.	Application of polyvinyl alcohol (PVA) in cement-based composite materials: A review of its engineering properties and microstructure behavior	172-180
Nili, M. / Ghorbankhani, A. H. / AlaviNia, A. / Zolfaghari, M.	Assessing the impact strength of steel fibre-reinforced concrete under quasi-static and high velocity dynamic impacts	264-271
Pang, Bo / Zhou, Zonghui / Hou, Pengkun / Du, Peng / Zhang, Lina / Xu, Hongxin	Autogenous and engineered healing mechanisms of carbonated steel slag aggregate in concrete	191-202
Wang, Hai-Long / Dai, Jian-Guo / Sun, Xiao-Yan / Zhang, Xiao-Long	Characteristics of concrete cracks and their influence on chloride penetration	216-225
Van Tittelboom, Kim / Wang, Jianyun / Araújo, Maria / Snoeck, Didier / Gruyaert, Elke / Debbaut, Brenda / Derluyn, Hannelore / Cnudde, Veerle / Tsangouri, Eleni / Van Hemelrijck, Danny / De Belie, Nele	Comparison of different approaches for self-healing concrete in a large-scale lab test	125-137
Zyka, Kujtim / Mohajerani, Abbas	Composite piles: A review	394-410
Kim, Min Ook / Bordelon, Amanda / Lee, Myung Kue / Oh, Byung Hwan	Cracking and failure of patch repairs in RC members subjected to bar corrosion	255-263
Sri Rama Chand, Madduru / Swamy Naga Ratna Giri, Pallapothu / Rathish Kumar, Pancharathi / Rajesh Kumar, Garje / Raveena, Chakilam	Effect of self curing chemicals in self compacting mortars	356-364
Medeiros-Junior, Ronaldo A. / Lima, Maryangela G.	Electrical resistivity of unsaturated concrete using different types of cement	11-16
Wei, Haibin / He, Qiuqi / Jiao, Yubo / Chen, Jiafeng / Hu, Maoxu	Evaluation of anti-icing performance for crumb rubber and diatomite compound modified asphalt mixture	109-116
Lo, Tommy Y. / Liao, Wenyu / Wong, C. K. / Tang, Waiching	Evaluation of carbonation resistance of paint coated concrete for buildings	299-306
Niu, Yanfang / Zhu, Ziqiang / Xiao, Jiaying / Liu, Zhengchun / Liang, Bo	Evaluation of storage stability of styrene–butadiene–styrene block copolymer-modified asphalt via electrochemical analysis	38-43
Dave, Niragi / Misra, Anil Kumar / Srivastava, Amit / Kaushik, Surendra Kumar	Experimental analysis of strength and durability properties of quaternary cement binder and mortar	117-124
Galetakis, Michael / Piperidi, Christina / Vasiliou, Anthoula / Alevizos, George / Steiakakis, Emmanouel / Komnitsas, Konstantinos / Soultana, Athanasia	Experimental investigation of the utilization of quarry dust for the production of microcement-based building elements by self-flowing molding casting	247-254
Guo, Yongchang / Xie, Jianhe / Xie, Zhihong / Zhong, Jian	Experimental study on compressive behavior of damaged normal- and high-strength concrete confined with CFRP laminates	411-425
Yu, R. / van Beers, L. / Spiesz, P. / Brouwers, H. J. H.	Impact resistance of a sustainable Ultra-High Performance Fibre Reinforced Concrete (UHPFRC) under pendulum impact loadings	203-215
Flores Medina, N. / Barbero-Barrera, M. Mar / Bustamante, Rosa	Improvement of the properties of gypsum-based composites with recycled isostatic graphite powder from the milling production of molds for Electrical Discharge Machining (EDM) used as a new filler	17-27
Corinaldesi, Valeria / Nardinocchi, Alessandro	Influence of type of fibers on the properties of high performance cement-based composites	321-331
Bader, Thomas K. / Schweigler, Michael / Serrano, Erik / Dorn, Michael / Enquist, Bertil / Hochreiner, Georg	Integrative experimental characterization and engineering modeling of single-dowel connections in LVL	235-246
D'Andrea, Antonio / Tozzo, Cristina	Interface stress state in the most common shear tests	341-355
Aprianti, Evi / Shafigh, Payam / Zawawi, Rodiah / Abu Hassan, Zahiruddin Fitri	Introducing an effective curing method for mortar containing high volume cementitious materials	365-377
Jiang, Jun / Lu, Zhongyuan / Niu, Yunhui / Li, Jun / Zhang, Yuping	Investigation of the properties of high-porosity cement foams based on ternary Portland cement–metakaolin–silica fume blends	181-190
Lee, Hyuk / Vimonsatit, Vanissorn / Chindaprasirt, Prinya	Mechanical and micromechanical properties of alkali activated fly-ash cement based on nano-indentation	95-102
Rehman, Sardar Kashif Ur / Ibrahim, Zainah / Memon, Shazim Ali / Jameel, Mohammed	Nondestructive test methods for concrete bridges: A review	58-86
Sun, Yifan / Xu, Ke / Zhang, Yuge / Zhang, Jing / Chen, Ru / Yuan, Zuanru / Xie, Hongfeng / Cheng, Rongshi	Organic montmorillonite reinforced epoxy mortar binders	378-384
Shirini, Bahram / Imaninasab, Reza	Performance evaluation of rubberized and SBS modified porous asphalt mixtures	165-171
Wang, D. / Leng, Z. / Hüben, M. / Oeser, M. / Steinauer, B.	Photocatalytic pavements with epoxy-bonded TiO2-containing spreading material	44-51
Blasco-López, F. J. / Alejandre, F. J. / Flores-Alés, V. / Cortés, I.	Plasterwork in the Ambassadors Hall (Salón de Embajadores) of the Real Alcázar of Seville (Spain): Graphic reconstruction of polychrome work by layer characterization	332-340
Kumar, Sanjeev / Gupta, Ramesh Chandra / Shrivastava, Sandeep / Csetenyi, Lazlo / Thomas, Blessen Skariah	Preliminary study on the use of quartz sandstone as a partial replacement of coarse aggregate in concrete based on clay content, morphology and compressive strength of combined gradation	103-108
Lantsoght, Eva O. L. / van der Veen, Cor / de Boer, Ane	Proposal for the fatigue strength of concrete under cycles of compression	138-156
Sáez del Bosque, I. F. / Martín-Pastor, M. / Sobrados, I. / Martinez-Ramirez, S. / Blanco-Varela, M. T.	Quantitative analysis of pure triclinic tricalcium silicate and C–S–H gels by 29Si NMR longitudinal relaxation time	52-57
Maruthapandian, V. / Muralidharan, S. / Saraswathy, V.	Spinel NiFe2O4 based solid state embeddable reference electrode for corrosion monitoring of reinforced concrete structures	28-37
Amran, Y. H. Mugahed / Ali, A. A. Abang / Rashid, Raizal S. M. / Hejazi, Farzad / Safiee, Nor Azizi	Structural behavior of axially loaded precast foamed concrete sandwich panels	307-320
Said, Shwan H. / Razak, Hashim Abdul	Structural behavior of RC engineered cementitious composite (ECC) exterior beam–column joints under reversed cyclic loading	226-234
Moura, A. / Flores-Colen, I. / de Brito, J.	Study of the effect of three anti-graffiti products on the physical properties of different substrates	157-164
Li, Guoxin / Zhang, Ai / Zhang, Ge / Tian, Ting	Study on a high strength ternary binder cured under different conditions	385-393
Wang, Boxin / Jin, Henan / Man, Teng / Wang, Qing	Study on the mechanical property of textile reinforced self-stressing concrete sheets	1-10
Morova, N. / Serin, S. / Terzi, S. / Saltan, M. / Ozdemir Kucukcapraz, D. / Sargin Karahancer, S. / Eriskin, E.	Utility of polyparaphenylene terephtalamide fiber in hot mix asphalt as a fiber	87-94
Hung, Chung-Chan / Yen, Wei-Ming / Yu, Kun-Hao	Vulnerability and improvement of reinforced ECC flexural members under displacement reversals: Experimental investigation and computational analysis	287-298
Harbec, D. / Tagnit-Hamou, A. / Gitzhofer, F.	Waste-glass fume synthesized using plasma spheroidization technology: Reactivity in cement pastes and mortars	272-286

Autor(en)

Titel

Seite(n)

Thong, C. C. / Teo, D. C. L. / Ng, C. K.

Application of polyvinyl alcohol (PVA) in cement-based composite materials: A review of its engineering properties and microstructure behavior

172-180

Nili, M. / Ghorbankhani, A. H. / AlaviNia, A. / Zolfaghari, M.

Assessing the impact strength of steel fibre-reinforced concrete under quasi-static and high velocity dynamic impacts

264-271

Pang, Bo / Zhou, Zonghui / Hou, Pengkun / Du, Peng / Zhang, Lina / Xu, Hongxin

Autogenous and engineered healing mechanisms of carbonated steel slag aggregate in concrete

191-202

Wang, Hai-Long / Dai, Jian-Guo / Sun, Xiao-Yan / Zhang, Xiao-Long

Characteristics of concrete cracks and their influence on chloride penetration

216-225

Van Tittelboom, Kim / Wang, Jianyun / Araújo, Maria / Snoeck, Didier / Gruyaert, Elke / Debbaut, Brenda / Derluyn, Hannelore / Cnudde, Veerle / Tsangouri, Eleni / Van Hemelrijck, Danny / De Belie, Nele

Comparison of different approaches for self-healing concrete in a large-scale lab test

125-137

Zyka, Kujtim / Mohajerani, Abbas

Composite piles: A review

394-410

Kim, Min Ook / Bordelon, Amanda / Lee, Myung Kue / Oh, Byung Hwan

Cracking and failure of patch repairs in RC members subjected to bar corrosion

255-263

Sri Rama Chand, Madduru / Swamy Naga Ratna Giri, Pallapothu / Rathish Kumar, Pancharathi / Rajesh Kumar, Garje / Raveena, Chakilam

Effect of self curing chemicals in self compacting mortars

356-364

Medeiros-Junior, Ronaldo A. / Lima, Maryangela G.

Electrical resistivity of unsaturated concrete using different types of cement

11-16

Wei, Haibin / He, Qiuqi / Jiao, Yubo / Chen, Jiafeng / Hu, Maoxu

Evaluation of anti-icing performance for crumb rubber and diatomite compound modified asphalt mixture

109-116

Lo, Tommy Y. / Liao, Wenyu / Wong, C. K. / Tang, Waiching

Evaluation of carbonation resistance of paint coated concrete for buildings

299-306

Niu, Yanfang / Zhu, Ziqiang / Xiao, Jiaying / Liu, Zhengchun / Liang, Bo

Evaluation of storage stability of styrene–butadiene–styrene block copolymer-modified asphalt via electrochemical analysis

38-43

Dave, Niragi / Misra, Anil Kumar / Srivastava, Amit / Kaushik, Surendra Kumar

Experimental analysis of strength and durability properties of quaternary cement binder and mortar

117-124

Galetakis, Michael / Piperidi, Christina / Vasiliou, Anthoula / Alevizos, George / Steiakakis, Emmanouel / Komnitsas, Konstantinos / Soultana, Athanasia

Experimental investigation of the utilization of quarry dust for the production of microcement-based building elements by self-flowing molding casting

247-254

Guo, Yongchang / Xie, Jianhe / Xie, Zhihong / Zhong, Jian

Experimental study on compressive behavior of damaged normal- and high-strength concrete confined with CFRP laminates

411-425

Yu, R. / van Beers, L. / Spiesz, P. / Brouwers, H. J. H.

Impact resistance of a sustainable Ultra-High Performance Fibre Reinforced Concrete (UHPFRC) under pendulum impact loadings

203-215

Flores Medina, N. / Barbero-Barrera, M. Mar / Bustamante, Rosa

Improvement of the properties of gypsum-based composites with recycled isostatic graphite powder from the milling production of molds for Electrical Discharge Machining (EDM) used as a new filler

17-27

Corinaldesi, Valeria / Nardinocchi, Alessandro