Construction and Building Materials - Juli 2016

Erschienen:	Juli 2016

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Rao, S. Krishna / Sravana, P. / Rao, T. Chandrasekhar	Abrasion resistance and mechanical properties of Roller Compacted Concrete with GGBS	925-933
Xiangqian, Fan / Shaowei, Hu / Jun, Lu / Congjie, Wei	Acoustic emission properties of concrete on dynamic tensile test	66-75
Pizzo, Benedetto / Macchioni, Nicola / Capretti, Chiara / Pecoraro, Elisa / Sozzi, Lorena / Fiorentino, Luigi	Assessing the wood compressive strength in pile foundations in relation to diagnostic analysis: The example of the Church of Santa Maria Maggiore, Venice	470-480
Letelier, Viviana / Tarela, Ester / Muñoz, Pedro / Moriconi, Giacomo	Assessment of the mechanical properties of a concrete made by reusing both: Brewery spent diatomite and recycled aggregates	492-498
Foraboschi, Paolo	The central role played by structural design in enabling the construction of buildings that advanced and revolutionized architecture	956-976
Shen, Weiguo / Yang, Zhenguo / Cao, Lianghong / Cao, Liu / Liu, Yi / Yang, Hui / Lu, Zili / Bai, Jian	Characterization of manufactured sand: Particle shape, surface texture and behavior in concrete	595-601
Akand, Lutfur / Yang, Mijia / Gao, Zhili	Characterization of pervious concrete through image based micromechanical modeling	547-555
Schmid, Thomas / Dariz, Petra	Chemical imaging of historical mortars by Raman microscopy	506-516
Chandra Paul, Suvash / van Zijl, Gideon P. A. G. / Babafemi, Adewumi John / Tan, Ming Jen	Chloride ingress in cracked and uncracked SHCC under cyclic wetting-drying exposure	232-240
Yin, Shi / Tuladhar, Rabin / Riella, Jacob / Chung, David / Collister, Tony / Combe, Mark / Sivakugan, Nagaratnam	Comparative evaluation of virgin and recycled polypropylene fibre reinforced concrete	134-141
Arcones-Pascual, Gustavo / Hernández-Olivares, Francisco / Sepulcre-Aguilar, Alberto	Comparative properties of a lime mortar with different metakaolin and natron additions	747-754
Han, Fanghui / Liu, Juanhong / Yan, Peiyu	Comparative study of reaction degree of mineral admixture by selective dissolution and image analysis	946-955
Chithra, S. / Kumar, S. R. R. Senthil / Chinnaraju, K. / Alfin Ashmita, F.	A comparative study on the compressive strength prediction models for High Performance Concrete containing nano silica and copper slag using regression analysis and Artificial Neural Networks	528-535
Vu, Quang Anh / Garnier, Vincent / Chaix, Jean François / Payan, Cédric / Lott, Martin / Eiras, Jesus N.	Concrete cover characterisation using dynamic acousto-elastic testing and Rayleigh waves	87-97
Sarir, Payam / Shen, Shui-Long / Arulrajah, Arul / Horpibulsuk, Suksun	Concrete wedge and coarse sand coating shear connection system in GFRP concrete composite deck	650-655
Alavi, Amir H. / Hasni, Hassene / Lajnef, Nizar / Chatti, Karim	Continuous health monitoring of pavement systems using smart sensing technology	719-736
Pyo, Sukhoon / Alkaysi, Mo / El-Tawil, Sherif	Crack propagation speed in ultra high performance concrete (UHPC)	109-118
Zou, Chao / Wang, Yimin / Lin, Junyong / Chen, Yekai	Creep behaviors and constitutive model for high density polyethylene geogrid and its application to reinforced soil retaining wall on soft soil foundation	763-771
Qian, Zhen-dong / Liu, Yang / Liu, Chang-bo / Zheng, Dong	Design and skid resistance evaluation of skeleton-dense epoxy asphalt mixture for steel bridge deck pavement	851-863
Davis, Matthew / Hoult, Neil A. / Scott, Allan	Distributed strain sensing to determine the impact of corrosion on bond performance in reinforced concrete	481-491
Quintero Q., Carlos F. / Momm, Leto / Leite, Leni F. M. / Bernucci, Liedi L. B.	Effect of asphalt binder hardness and temperature on fatigue life and complex modulus of hot mixes	755-762
Król, Jan B. / Kowalski, Karol J. / Niczke, Łukasz / Radziszewski, Piotr	Effect of bitumen fluxing using a bio-origin additive	194-203
Roig-Flores, M. / Pirritano, F. / Serna, P. / Ferrara, L.	Effect of crystalline admixtures on the self-healing capability of early-age concrete studied by means of permeability and crack closing tests	447-457
Li, Bo / Ling, Tung-Chai / Qu, Lie / Wang, Yuan	Effects of a two-step heating process on the properties of lightweight aggregate prepared with sewage sludge and saline clay	119-126
Kabir, Muhammad Ikramul / Shrestha, Rijun / Samali, Bijan	Effects of applied environmental conditions on the pull-out strengths of CFRP-concrete bond	817-830
Arslan, Mehmet Emin	Effects of basalt and glass chopped fibers addition on fracture energy and mechanical properties of ordinary concrete: CMOD measurement	383-391
Jeyaprabha, B. / Elangovan, G. / Prakash, P.	Effects of elevated temperature and water quenching on strength and microstructure of mortars with river sand substitutes	688-698
Bouziadi, Farid / Boulekbache, Bensaid / Hamrat, Mostefa	The effects of fibres on the shrinkage of high-strength concrete under various curing temperatures	40-48
Dehouche, Nadjet / Kaci, Mustapha / Mouillet, Virginie	The effects of mixing rate on morphology and physical properties of bitumen/organo-modified montmorillonite nanocomposites	76-86
Gungat, Lillian / Yusoff, Nur Izzi Md. / Hamzah, Meor Othman	Effects of RH-WMA additive on rheological properties of high amount reclaimed asphalt binders	665-672
Su, Yu / Li, Jun / Wu, Chengqing / Wu, Pengtao / Li, Zhong-Xian	Effects of steel fibres on dynamic strength of UHPC	708-718
Li, Wei-wen / Ji, Wei-ming / Fang, Guo-hao / Liu, Yu-qing / Xing, Feng / Liu, Yu-kai / Dong, Bi-qin	Electrochemical impedance interpretation for the fracture toughness of carbon nanotube/cement composites	499-505
Gardner, L. / Bu, Y. / Francis, P. / Baddoo, N. R. / Cashell, K. A. / McCann, F.	Elevated temperature material properties of stainless steel reinforcing bar	977-997
Fei, Peng / Xiong, Hanguo / Cai, Jie / Liu, Chao / Yu, Yan	Enhanced the weatherability of bamboo fiber-based outdoor building decoration materials by rutile nano-TiO 2	307-316
Liu, Fang / Shen, Shui-Long / Hou, Dong-Wei / Arulrajah, Arul / Horpibulsuk, Suksun	Enhancing behavior of large volume underground concrete structure using expansive agents	49-55
Tsai, Bor-Wen / Coleri, Erdem / Harvey, John T. / Monismith, Carl L.	Evaluation of AASHTO T 324 Hamburg-Wheel Track Device test	248-260
Ryu, Hwa-Sung / Singh, Jitendra Kumar / Yang, Hyun-Min / Lee, Han-Seung / Ismail, Mohamed A.	Evaluation of corrosion resistance properties of N, N′-Dimethyl ethanolamine corrosion inhibitor in saturated Ca(OH) 2 solution with different concentrations of chloride ions by electrochemical experiments	223-231
Lee, Binna / Lee, Jong-Suk / Min, Jiyoung / Lee, Jang Hwa	Evaluation of physical characteristics and microscopic structure of mortar containing synthetic resin	880-887
Nazzal, Munir D. / Iqbal, Md. Tanvir / Kim, Sang Soo / Abbas, Ala R. / Akentuna, Moses / Quasem, Tanvir	Evaluation of the long-term performance and life cycle costs of GTR asphalt pavements	261-268
Oh, Han Jin / Cho, Young Kyo / Seo, Youngguk / Kim, Seong-Min	Experimental evaluation of longitudinal behavior of continuously reinforced concrete pavement depending on base type	374-382
Shen, Weiguo / Li, Xinling / Gan, Gejin / Cao, Liu / Li, Chaochao / Bai, Jian	Experimental investigation on shrinkage and water desorption of the paste in high performance concrete	618-624
Gu, Xingyu / Yu, Bin / Wu, Ming	Experimental study of the bond performance and mechanical response of GFRP reinforced concrete	407-415
Youm, Kwang-Soo / Moon, Jiho / Cho, Jae-young / Kim, Jung J.	Experimental study on strength and durability of lightweight aggregate concrete containing silica fume	517-527
Hung, Hsiao-Hui / Sung, Yu-Chi / Chang, Kou-Chun / Yin, Shih-Hsun / Yeh, Fang-Yao	Experimental testing and numerical simulation of a temporary rescue bridge using GFRP composite materials	181-193
Nunes, Cristiana / Slížková, Zuzana	Freezing and thawing resistance of aerial lime mortar with metakaolin and a traditional water-repellent admixture	896-905
Tchakouté, Hervé K. / Rüscher, Claus H. / Kong, Sakeo / Kamseu, Elie / Leonelli, Cristina	Geopolymer binders from metakaolin using sodium waterglass from waste glass and rice husk ash as alternative activators: A comparative study	276-289
Guan, Xuemao / Liu, Songhui / Feng, Chunhua / Qiu, Man	The hardening behavior of γ-C 2 S binder using accelerated carbonation	204-207
Zhang, Hong-liang / Su, Man-man / Zhao, Shi-feng / Zhang, Yong-ping / Zhang, Zeng-ping	High and low temperature properties of nano-particles/polymer modified asphalt	323-332
Saha, Gourab / Biligiri, Krishna Prapoorna	Homothetic behaviour investigation on fracture toughness of asphalt mixtures using semicircular bending test	423-433
Kong, Yaning / Wang, Peiming / Liu, Shuhua / Gao, Zhiyang	Hydration and microstructure of cement-based materials under microwave curing	831-838
Vafaei, Mostafa / Allahverdi, Ali	Influence of calcium aluminate cement on geopolymerization of natural pozzolan	290-296
Sung, Che-Hung / Huang, Ran / Wu, Yann-Hwang / Tsai, Chia-Jung / Lai, Hao-Wen	Influence of sulfur trioxide on volume change and compressive strength of eco-mortar	464-469
Nežerka, V. / Antoš, J. / Litoš, J. / Tesárek, P. / Zeman, J.	An integrated experimental-numerical study of the performance of lime-based mortars in masonry piers under eccentric loading	913-924
Suwan, Teewara / Fan, Mizi / Braimah, Nuhu	Internal heat liberation and strength development of self-cured geopolymers in ambient curing conditions	297-306
Pang, Bo / Zhou, Zonghui / Cheng, Xin / Du, Peng / Xu, Hongxin	ITZ properties of concrete with carbonated steel slag aggregate in salty freeze-thaw environment	162-171
Lu, Dai Xuan / Saleh, Mofreh	Laboratory evaluation of warm mix asphalt incorporating high RAP proportion by using evotherm and sylvaroad additives	580-587
Meng, Qingfei / Hao, Hong / Chen, Wensu	Laboratory test and numerical study of structural insulated panel strengthened with glass fibre laminate against windborne debris impact	434-446
Shaikh, Faiz Uddin Ahmed / Hosan, Anwar	Mechanical properties of steel fibre reinforced geopolymer concretes at elevated temperatures	15-28
Nassar, Ahmed I. / Mohammed, Mahmoud Khashaa / Thom, Nicholas / Parry, Tony	Mechanical, durability and microstructure properties of Cold Asphalt Emulsion Mixtures with different types of filler	352-363
Logesh Kumar, M. / Revathi, V.	Metakaolin bottom ash blend geopolymer mortar – A feasibility study	1-5
Aguirre, Max A. / Hassan, Marwa M. / Shirzad, Sharareh / Daly, William H. / Mohammad, Louay N.	Micro-encapsulation of asphalt rejuvenators using melamine-formaldehyde	29-39
Mohseni, Ehsan / Naseri, Farzad / Amjadi, Ramin / Mehrinejad Khotbehsara, Mojdeh / Ranjbar, Malek Mohammad	Microstructure and durability properties of cement mortars containing nano-TiO 2 and rice husk ash	656-664
Phung, Quoc Tri / Maes, Norbert / Jacques, Diederik / De Schutter, Geert / Ye, Guang / Perko, Janez	Modelling the carbonation of cement pastes under a CO 2 pressure gradient considering both diffusive and convective transport	333-351
Hawileh, Rami A. / Abdalla, Jamal A. / Hasan, Sara S. / Ziyada, Meena B. / Abu-Obeidah, Adi	Models for predicting elastic modulus and tensile strength of carbon, basalt and hybrid carbon-basalt FRP laminates at elevated temperatures	364-373
Hasanzadeh, Bashir / Liu, Fengjuan / Sun, Zhihui	Monitoring hydration of UHPC and conventional paste by quantitative analysis on Raman patterns	208-214
Chen, Qing / Zhu, Hehua / Yan, Zhiguo / Ju, J. Woody / Jiang, Zhengwu / Wang, Yaqiong	A multiphase micromechanical model for hybrid fiber reinforced concrete considering the aggregate and ITZ effects	839-850
Lu, Zichen / Kong, Xiangming / Yang, Ruifang / Zhang, Yanrong / Jiang, Lingfei / Wang, Ziming / Wang, Qichun / Liu, Wei / Zeng, Min / Zhou, Shiming / Dong, Biqin / Xing, Feng	Oil swellable polymer modified cement paste: Expansion and crack healing upon oil absorption	98-108
Vidya Sagar, R.	A parallel between earthquake sequences and acoustic emissions released during fracture process in reinforced concrete structures under flexural loading	772-793
Wang, Dongpo / Wu, Dongsheng / Ouyang, Chaojun / Zhai, Mingang	Performance and design of post-installed large diameter anchors in concrete	142-150
Tamimi, Adil / Hassan, Noha M. / Fattah, Kazi / Talachi, Amirhooman	Performance of cementitious materials produced by incorporating surface treated multiwall carbon nanotubes and silica fume	934-945
Yu, Xin / Tao, Zhong / Song, Tian-Yi / Pan, Zhu	Performance of concrete made with steel slag and waste glass	737-746
Morales-Conde, M. J. / Rodríguez-Liñán, C. / Pedreño-Rojas, M. A.	Physical and mechanical properties of wood-gypsum composites from demolition material in rehabilitation works	6-14
Aguilar, Rafael / Nakamatsu, Javier / Ramírez, Eduardo / Elgegren, Mariela / Ayarza, Jorge / Kim, Suyeon / Pando, Miguel A. / Ortega-San-Martin, Luis	The potential use of chitosan as a biopolymer additive for enhanced mechanical properties and water resistance of earthen construction	625-637
Xiang, Xiao-dong / Xi, Jia-chen / Li, Can-hua / Jiang, Xin-wei	Preparation and application of the cement-free steel slag cementitious material	874-879
Ji, Ru / Zhang, Zuotai / Yan, Chen / Zhu, Mengguang / Li, Zhongmin	Preparation of novel ceramic tiles with high Al 2 O 3 content derived from coal fly ash	888-895
Haddad, Rami H. / Alshbuol, Odey	Production of geopolymer concrete using natural pozzolan: A parametric study	699-707
Woszuk, Agnieszka / Franus, Wojciech	Properties of the Warm Mix Asphalt involving clinoptilolite and Na-P1 zeolite additives	556-563
He, Yuan / Alavi, Mohammad Zia / Jones, David / Harvey, John	Proposing a solvent-free approach to evaluate the properties of blended binders in asphalt mixes containing high quantities of reclaimed asphalt pavement and recycled asphalt shingles	172-180
Al-alaily, Hossam S. / Hassan, Assem A. A.	Refined statistical modeling for chloride permeability and strength of concrete containing metakaolin	564-579
Toribio, J. / Lorenzo, M. / Vergara, D. / Aguado, L.	Residual stress redistribution induced by fatigue in cold-drawn prestressing steel wires	317-322
Cavalli, Alberto / Cibecchini, Daniele / Togni, Marco / Sousa, Hélder S.	A review on the mechanical properties of aged wood and salvaged timber	681-687
Yu, Xin / Dong, Fuqiang / Ding, Gongying / Liu, Shengjie / Shen, Shihui	Rheological and microstructural properties of foamed epoxy asphalt	215-222
Yang, Shih-Hsien / Suciptan, Try	Rheological behavior of Japanese cedar-based biobinder as partial replacement for bituminous binder	127-133
Arulrajah, Arul / Mohammadinia, Alireza / Phummiphan, Itthikorn / Horpibulsuk, Suksun / Samingthong, Wisanukorn	Stabilization of Recycled Demolition Aggregates by Geopolymers comprising Calcium Carbide Residue, Fly Ash and Slag precursors	864-873
Kogbara, Reginald B. / Masad, Eyad A. / Kassem, Emad / Scarpas, A. (Tom) / Anupam, Kumar	A state-of-the-art review of parameters influencing measurement and modeling of skid resistance of asphalt pavements	602-617
Zhang, Xihong / Hao, Hong / Shi, Yanchao / Cui, Jian / Zhang, Xuejie	Static and dynamic material properties of CFRP/epoxy laminates	638-649
Arulrajah, Arul / Kua, Teck-Ang / Horpibulsuk, Suksun / Phetchuay, Chayakrit / Suksiripattanapong, Cherdsak / Du, Yan-Jun	Strength and microstructure evaluation of recycled glass-fly ash geopolymer as low-carbon masonry units	400-406
Sayadi, Ali A. / Juan Vilches, T. / Neitzert, Thomas R. / Clifton, G. Charles	Strength of bearing area and locking area of galvanized strips in foamed concrete	56-65
Li, Jun / Sun, Ming-qing / Hu, Ji-hong / Ruan, Rong-tao / Wang, Ying-jun	Structural performance of reinforced strain hardening cementitious composite pipes during monotonic loading	794-804
Thomas, C. / Setién, J. / Polanco, J. A.	Structural recycled aggregate concrete made with precast wastes	536-546
Korobiichuk, Igor / Korobiichuk, Valentyn / Nowicki, Michał / Shamrai, Vladimir / Skyba, Galina / Szewczyk, Roman	The study of corrosion resistance of Pokostivskiy granodiorites after processing by various chemical and mechanical methods	241-247
Akentuna, Moses / Kim, Sang Soo / Nazzal, Munir / Abbas, Ala R. / Arefin, Mir Shahnewaz	Study of the thermal stress development of asphalt mixtures using the Asphalt Concrete Cracking Device (ACCD)	416-422
Gu, Yue / Ran, Qianping / Shu, Xin / Yu, Cheng / Chang, Honglei / Liu, Jiaping	Synthesis of nanoSiO 2 @PCE core-shell nanoparticles and its effect on cement hydration at early age	673-680
Sáez-Pérez, Mª Paz / Rodríguez-Gordillo, José / Durán-Suárez, Jorge A.	Synthetic white pigments (white titanium and white zinc) in different binding media. Influence of environmental agents	151-161
Ouyang, Jian / Tan, Yiqiu / Corr, David J. / Shah, Surendra P.	The thixotropic behavior of fresh cement asphalt emulsion paste	906-912
Li, Guo / Guo, Chenhao / Gao, Xin / Ji, Yongsheng / Geng, Ou	Time dependence of carbonation resistance of concrete with organic film coatings	269-275
Zhu, Wen / Wei, Jiangxiong / Li, Fangxian / Zhang, Tongsheng / Chen, Yang / Hu, Jie / Yu, Qijun	Understanding restraint effect of coarse aggregate on the drying shrinkage of self-compacting concrete	458-463
Moghaddam, Taher Baghaee / Baaj, Hassan	The use of rejuvenating agents in production of recycled hot mix asphalt: A systematic review	805-816
Wang, Zhenjun / Xu, Chuang / Wang, Sheng / Gao, Jie / Ai, Tao	Utilization of magnetite tailings as aggregates in asphalt mixtures	392-399
Oliveira, Lidiane Santana / Pacca, Sérgio Almeida / John, Vanderley Moacyr	Variability in the life cycle of concrete block CO 2 emissions and cumulative energy demand in the Brazilian Market	588-594

Über diese
Datenseite
IssueID
22580
Veröffentlicht am:
15.12.2018
Geändert am:
30.06.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - Juli 2016

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - Juli 2016

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.