Construction and Building Materials - Januar 2016

Erschienen:	Januar 2016

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Tavares, A. / Costa, A. / Rocha, F. / Velosa, A.	Absorbent materials in waterproofing barriers, analysis of the role of diatomaceous earth	125-132
Amini, Kamran / Jalalpour, Mehdi / Delatte, Norbert	Advancing concrete strength prediction using non-destructive testing: Development and verification of a generalizable model	762-768
Alchapar, Noelia L. / Correa, Erica N.	Aging of roof coatings. Solar reflectance stability according to their morphological characteristics	297-305
Arora, Sumit / Singh, S. P.	Analysis of flexural fatigue failure of concrete made with 100% Coarse Recycled Concrete Aggregates	782-791
Grossi, Paolo / Sartori, Tiziano / Giongo, Ivan / Tomasi, Roberto	Analysis of timber log-house construction system via experimental testing and analytical modelling	1127-1144
Zabelkin, Sergey / Grachev, Andrey / Fayzrakhmanova, Guzeliya / Makarov, Alexander / Bashkirov, Vladimir	Application of the water-insoluble pyrolysis oil fraction as an organic binder	59-64
Díaz-Vilariño, L. / González-Jorge, H. / Bueno, M. / Arias, P. / Puente, I.	Automatic classification of urban pavements using mobile LiDAR data and roughness descriptors	208-215
Georgouli, Konstantina / Loizos, Andreas / Plati, Christina	Calibration of dynamic modulus predictive model	65-75
Witomski, Piotr / Olek, Wiesław / Bonarski, Jan T.	Changes in strength of Scots pine wood (Pinus silvestris L.) decayed by brown rot (Coniophora puteana) and white rot (Trametes versicolor)	162-166
Abdel-Mohti, Ahmed / Shen, Hui / Khodair, Yasser	Characteristics of self-consolidating concrete with RAP and SCM	564-573
Rahim, M. / Douzane, O. / Tran Le, A. D. / Promis, G. / Langlet, T.	Characterization and comparison of hygric properties of rape straw concrete and hemp concrete	679-687
Khater, H. M. / Abd el Gawaad, H. A.	Characterization of alkali activated geopolymer mortar doped with MWCNT	329-337
Neto, Elsa / Magina, Sandra / Camões, Aires / Begonha, Arlindo / Evtuguin, Dmitry V. / Cachim, Paulo	Characterization of concrete surface in relation to graffiti protection coatings	435-444
Wang, Zhendi / Zeng, Qiang / Wang, Ling / Li, Kefei / Xu, Shilang / Yao, Yan	Characterizing frost damages of concrete with flatbed scanner	872-883
Dackermann, Ulrike / Elsener, Roman / Li, Jianchun / Crews, Keith	A comparative study of using static and ultrasonic material testing methods to determine the anisotropic material properties of wood	963-976
Reynolds, Thomas / Casagrande, Daniele / Tomasi, Roberto	Comparison of multi-storey cross-laminated timber and timber frame buildings by in situ modal analysis	1009-1017
Soriano, Claudia / Alfantazi, Akram	Corrosion behavior of galvanized steel due to typical soil organics	904-912
Khaliq, Wasim / Ehsan, Muhammad Basit	Crack healing in concrete using various bio influenced self-healing techniques	349-357
Adams, Matthew P. / Fu, Tengfei / Cabrera, Adal Guerra / Morales, Monica / Ideker, Jason H. / Isgor, O. Burkan	Cracking susceptibility of concrete made with coarse recycled concrete aggregates	802-810
Lye, Chao-Qun / Dhir, Ravindra K. / Ghataora, Gurmel S. / Li, Hui	Creep strain of recycled aggregate concrete	244-259
Liang, Chaofeng / Liu, Tiejun / Xiao, Jianzhuang / Zou, Dujian / Yang, Qiuwei	The damping property of recycled aggregate concrete	834-842
Riggio, Mariapaola / Sandak, Jakub / Sandak, Anna	Densified wooden nails for new timber assemblies and restoration works: A pilot research	1084-1092
Pop, O. / Dubois, F.	Determination of timber material fracture parameters using mark tracking method	977-984
Xue, Yongchao / Qian, Zhendong	Development and performance evaluation of epoxy asphalt concrete modified with mineral fiber	378-383
Zhang, Jiupeng / Fan, Zepeng / Fang, Kai / Pei, Jianzhong / Xu, Li	Development and validation of nonlinear viscoelastic damage (NLVED) model for three-stage permanent deformation of asphalt concrete	384-392
An, Gyeong-Hee / Park, Jae-Min / Cha, Sang-Lyul / Kim, Jin-Keun	Development of a portable device and compensation method for the prediction of the adiabatic temperature rise of concrete	640-647
Afonso, Márcia Lopes / Dinis-Almeida, Marisa / Pereira-de-Oliveira, Luiz A. / Castro-Gomes, João / Zoorob, Salah E.	Development of a semi-flexible heavy duty pavement surfacing incorporating recycled and waste aggregates – Preliminary study	155-161
Campos, A. / López, C. M. / Aguado, A.	Diffusion–reaction model for the internal sulfate attack in concrete	531-540
Kim, Min Kyoung / Kim, Dong joo / Chung, Young-Soo / Choi, Eunsoo	Direct tensile behavior of shape-memory-alloy fiber-reinforced cement composites	462-470
Dackermann, Ulrike / Li, Jianchun / Rijal, Rajendra / Crews, Keith	A dynamic-based method for the assessment of connection systems of timber composite structures	999-1008
Nawaz, Adnan / Julnipitawong, Parnthep / Krammart, Pitisan / Tangtermsirikul, Somnuk	Effect and limitation of free lime content in cement-fly ash mixtures	515-530
Li, Zhengqi / Afshinnia, Kaveh / Rangaraju, Prasada Rao	Effect of alkali content of cement on properties of high performance cementitious mortar	631-639
Choudhury, M. S. I. / Amin, A. F. M. S. / Islam, M. M. / Hasnat, A.	Effect of confining pressure distribution on the dilation behavior in FRP-confined plain concrete columns using stone, brick and recycled aggregates	541-551
Chabannes, Morgan / Garcia-Diaz, Eric / Clerc, Laurent / Bénézet, Jean-Charles	Effect of curing conditions and Ca(OH)2-treated aggregates on mechanical properties of rice husk and hemp concretes using a lime-based binder	821-833
Pavlík, V. / Užáková, M.	Effect of curing conditions on the properties of lime, lime–metakaolin and lime–zeolite mortars	14-25
Jang, J. G. / Lee, H. K.	Effect of fly ash characteristics on delayed high-strength development of geopolymers	260-269
Aranda, Berenger / Guillou, Olivier / Lanos, Christophe / Daiguebonne, Carole / Freslon, Stéphane / Tessier, Christophe / Laurans, Mélissa / Baux, Christophe	Effect of multiphasic structure of binder particles on the mechanical properties of a gypsum-based material	175-181
Yazdanbakhsh, Ardavan / Bank, Lawrence C.	The effect of shear strength on load capacity of FRP strengthened beams with recycled concrete aggregate	133-140
Nemati Chari, Mehdi / Shekarchi, Mohammad / Sobhani, Jafar / Chari, Majid Nemati	The effect of temperature on the moisture transfer coefficient of cement-based mortars: An experimental investigation	306-317
Fan, Yingfang / Zhang, Shiyi / Wang, Qi / Shah, Surendra P.	The effects of nano-calcined kaolinite clay on cement mortar exposed to acid deposits	486-495
Martins, Carlos / Dias, Alfredo M. P. G. / Costa, R. / Santos, Pedro	Environmentally friendly high performance timber–concrete panel	1060-1069
Dimter, Sanja / Rukavina, Tatjana / Minažek, Krunoslav	Estimation of elastic properties of fly ash–stabilized mixes using nondestructive evaluation methods	505-514
Gao, Lei / Ni, Fujian / Ling, Cheng / Yan, Jinhai	Evaluation of fatigue behavior in cold recycled mixture using digital image correlation method	393-402
Fursa, T. V. / Dann, D. D. / Osipov, K. Yu.	Evaluation of freeze–thaw damage in concrete by the parameters of electric response under impact excitation	182-189
Buss, Ashley / Williams, R. Christopher / Schram, Scott	Evaluation of moisture susceptibility tests for warm mix asphalts	358-366
Said, Mohamed / Adam, Maher A. / Mahmoud, Ahmed A. / Shanour, Ali S.	Experimental and analytical shear evaluation of concrete beams reinforced with glass fiber reinforced polymers bars	574-591
Chen, Yu / Feng, Ran / Xiong, Lele	Experimental and numerical investigations on steel–concrete–PVC SHS joints under axial compression	654-670
Barros, Joaquim A. O. / Silva, Flávio de A. / Toledo Filho, Romildo D.	Experimental and numerical research on the potentialities of layered reinforcement configuration of continuous sisal fibers for thin mortar panels	792-801
Luso, Eduarda / Lourenço, Paulo B.	Experimental characterization of commercial lime based grouts for stone masonry consolidation	216-225
Li, Sheng / Huang, You / Liu, Zhao-hui	Experimental evaluation of asphalt material for interlayer in rigid–flexible composite pavement	699-705
Wrzesniak, Daniela / Rodgers, Geoffrey W. / Fragiacomo, Massimo / Chase, J. Geoffrey	Experimental testing of damage-resistant rocking glulam walls with lead extrusion dampers	1145-1153
Tung, Nguyen Duc / Tue, Nguyen Viet	A fracture mechanics-based approach to modeling the confinement effect in reinforced concrete columns	893-903
Liu, Zhichao / Hansen, Will	Freeze–thaw durability of high strength concrete under deicer salt exposure	478-485
Dubois, Vincent / Wirquin, Eric / Flament, Cédric / Sloma, Philippe	Fresh and hardened state properties of hemp concrete made up of a large proportion of quarry fines for the production of blocks	84-93
Diab, Ahmed M. / Mohamed, Ismail A. / Aliabdo, Ali A.	Impact of organic carbon on hardened properties and durability of limestone cement concrete	688-698
Martínez-Echevarría Romero, Ma José / Tafur Garro, Nancy Mariela / Gallardo Zevallos, Germán	Implementation of the mechanistic–empirical pavement design in northern Peru using a calibration coefficient for the International Roughness Index	270-280
Estrada-Martínez, Salvador / Mollón, Victoria / Bonhomme, Jorge	Improvements to the procedure for flexural testing, on two spans, of full wood-based sandwich panel subject to uniform load	281-296
Nowak, Tomasz P. / Jasienko, Jerzy / Hamrol-Bielecka, Katarzyna	In situ assessment of structural timber using the resistance drilling method – Evaluation of usefulness	403-415
Xu, Biwan / Ma, Hongyan / Hu, Chuanlin / Yang, Shuqing / Li, Zongjin	Influence of curing regimes on mechanical properties of magnesium oxychloride cement-based composites	613-619
Li, Ying / Li, Zongjin / Pei, Huafu / Yu, Hongfa	The influence of FeSO4 and KH2PO4 on the performance of magnesium oxychloride cement	233-238
Barnat-Hunek, Danuta / Smarzewski, Piotr	Influence of hydrophobisation on surface free energy of hybrid fiber reinforced ultra-high performance concrete	367-377
Al-Mohamadawi, Ali / Benhabib, Karim / Dheilly, Rose-Marie / Goullieux, Adeline	Influence of lignocellulosic aggregate coating with paraffin wax on flax shive and cement-shive composite properties	94-104
Kathirvel, Parthiban / Kaliyaperumal, Saravana Raja Mohan	Influence of recycled concrete aggregates on the flexural properties of reinforced alkali activated slag concrete	51-58
Rashad, Alaa M. / Zeedan, Sayieda R. / Hassan, Ahmed A.	Influence of the activator concentration of sodium silicate on the thermal properties of alkali-activated slag pastes	811-820
Sassoni, Enrico / Graziani, Gabriela / Franzoni, Elisa	An innovative phosphate-based consolidant for limestone. Part 1: Effectiveness and compatibility in comparison with ethyl silicate	918-930
Sassoni, Enrico / Graziani, Gabriela / Franzoni, Elisa	An innovative phosphate-based consolidant for limestone. Part 2: Durability in comparison with ethyl silicate	931-942
Vololonirina, Oly / Perrin, Bernard	Inquiries into the measurement of vapour permeability of permeable materials	338-348
Sebastian, W. M. / Mudie, J. / Cox, G. / Piazza, M. / Tomasi, R. / Giongo, I.	Insight into mechanics of externally indeterminate hardwood–concrete composite beams	1029-1048
Nehdi, Moncef L. / Mohamed, Nedal / Soliman, Ahmed M.	Investigation of buried full-scale SFRC pipes under live loads	733-742
Yang, Tao / Ma, Xiao / Zhang, Bingjian / Zhang, Hui	Investigations into the function of sticky rice on the microstructures of hydrated lime putties	105-112
Jayasinghe, C. / Fonseka, W. M. C. D. J. / Abeygunawardhene, Y. M.	Load bearing properties of composite masonry constructed with recycled building demolition waste and cement stabilized rammed earth	471-477
Xu, Yi / Chen, Shenghong	A method for modeling the damage behavior of concrete with a three-phase mesostructure	26-38
Karagiannis, V. / Málaga-Chuquitaype, C. / Elghazouli, A. Y.	Modified foundation modelling of dowel embedment in glulam connections	1168-1179
Valluzzi, Maria Rosa / Nardon, Fabiola / Garbin, Enrico / Panizza, Matteo	Multi-scale characterization of moisture and thermal cycle effects on composite-to-timber strengthening	1070-1083
Schabowicz, Krzysztof / Gorzelańczyk, Tomasz	A nondestructive methodology for the testing of fibre cement boards by means of a non-contact ultrasound scanner	200-207
Uibu, Mai / Somelar, Peeter / Raado, Lembi-Merike / Irha, Natalja / Hain, Tiina / Koroljova, Arina / Kuusik, Rein	Oil shale ash based backfilling concrete – Strength development, mineral transformations and leachability	620-630
Metelli, Giovanni / Preti, Marco / Giuriani, Ezio	On the delamination phenomenon in the repair of timber beams with steel plates	1018-1028
Nie, Ding / An, Xuehui	Optimization of SCC mix at paste level by using numerical method based on a paste rheological threshold theory	428-434
Knop, Yaniv / Peled, Alva	Packing density modeling of blended cement with limestone having different particle sizes	44-50
Khalid, Nur Hafizah A. / Hussin, Mohd W. / Mirza, Jahangir / Ariffin, Nur Farhayu / Ismail, Mohamed A. / Lee, Han-Seung / Mohamed, Azman / Jaya, Ramadhansyah Putra	Palm oil fuel ash as potential green micro-filler in polymer concrete	950-960
Li, Mingliang / van Keulen, Wim / Ceylan, Halil / Cao, Dongwei / van de Ven, Martin / Molenaar, André	Pavement stiffness measurements in relation to mechanical impedance	455-461
Zega, C. J. / Coelho Dos Santos, G. S. / Villagrán-Zaccardi, Y. A. / Di Maio, A. A.	Performance of recycled concretes exposed to sulphate soil for 10 years	714-721
Herráiz, Teresa Real / Herráiz, Julia I. Real / Domingo, Laura Montalbán / Domingo, Francisco Carrión	Posidonia oceanica used as a new natural fibre to enhance the performance of asphalt mixtures	601-612
Kim, Young-Seek / Kim, Sang-Woo / Lee, Jung-Yoon / Lee, Jae-Man / Kim, Hyeong-Gook / Kim, Kil-Hee	Prediction of stress–strain behavior of spirally confined concrete considering lateral expansion	743-761
Mo, Kim Hung / Visintin, Phillip / Alengaram, U. Johnson / Jumaat, Mohd Zamin	Prediction of the structural behaviour of oil palm shell lightweight concrete beams	722-732
Casagrande, Daniele / Rossi, Simone / Tomasi, Roberto / Mischi, Gianluca	A predictive analytical model for the elasto-plastic behaviour of a light timber-frame shear-wall	1113-1126
Liao, Kuo-Wei / Cheng, Min-Yuan / Chiu, Yung-Fang / Lee, Jin-Han	Preliminary bridge health evaluation using the pier vibration frequency	552-563
Negrão, João H.	Preliminary study on wire prestressing methods for timber pieces reinforcement	1093-1100
Zhang, Yulin / Zhao, Qinglin / Liu, Ciqi / Zhou, Mingkai	Properties comparison of mortars with welan gum or cellulose ether	648-653
Sun, Zhaojie / Yi, Junyan / Huang, Yudong / Feng, Decheng / Guo, Chaoyang	Properties of asphalt binder modified by bio-oil derived from waste cooking oil	496-504
Aouba, Laila / Bories, Cecile / Coutand, Marie / Perrin, Bernard / Lemercier, Hervé	Properties of fired clay bricks with incorporated biomasses: Cases of Olive Stone Flour and Wheat Straw residues	7-13
Gesoǧlu, Mehmet / Güneyisi, Erhan / Asaad, Diler Sabah / Muhyaddin, Guler Fakhraddin	Properties of low binder ultra-high performance cementitious composites: Comparison of nanosilica and microsilica	706-713
Casagrande, Daniele / Rossi, Simone / Sartori, Tiziano / Tomasi, Roberto	Proposal of an analytical procedure and a simplified numerical model for elastic response of single-storey timber shear-walls	1101-1112
Turker, Hakan Tacettin / Özbay, Erdoğan / Balcikanli, Muzeyyen	Pullout capacity development of cast in place anchors with embedded studs	39-43
Liu, Peng / Song, Li / Yu, Zhiwu	Quantitative moisture model of interior concrete in structures exposed to natural weather	76-83
Subhani, Mahbube / Li, Jianchun / Samali, Bijan / Crews, Keith	Reducing the effect of wave dispersion in a timber pole based on transversely isotropic material modelling	985-998
Galetakis, Michael / Soultana, Athanasia	A review on the utilisation of quarry and ornamental stone industry fine by-products in the construction sector	769-781
Al-Mansob, Ramez A. / Ismail, Amiruddin / Yusoff, Nur Izzi Md. / Albrka, Shaban Ismael / Azhari, Che Husna / Karim, Mohamed Rehan	Rheological characteristics of unaged and aged epoxidised natural rubber modified asphalt	190-199
Rossi, Simone / Casagrande, Daniele / Tomasi, Roberto / Piazza, Maurizio	Seismic elastic analysis of light timber-frame multi-storey buildings: Proposal of an iterative approach	1154-1167
Xu, Shanhua / Li, Anbang / Ji, Zengyang / Wang, Yan	Seismic performance of reinforced concrete columns after freeze–thaw cycles	861-871
Feiteira, J. / Gruyaert, E. / De Belie, N.	Self-healing of moving cracks in concrete by means of encapsulated polymer precursors	671-678
Estévez-Cimadevila, J. / Otero-Chans, D. / Martín-Gutiérrez, E. / Suárez-Riestra, F.	Self-tensioning system for long-span wooden structural floors	852-860
Yardim, Yavuz / Lalaj, Ornela	Shear strengthening of unreinforced masonry wall with different fiber reinforced mortar jacketing	149-154
Tabaković, Amir / McNally, Ciaran / Fallon, Eanna	Specification development for cold in-situ recycling of asphalt	318-328
Sebastian, Wendel / Piazza, Maurizio / Tomasi, Roberto	State-of-the-art in timber materials and structures research	961-962
Koh, Taehoon / Shin, Moochul / Bae, Younghoon / Hwang, Seonkeun	Structural performances of an eco-friendly prestressed concrete sleeper	445-454
Mymrin, Vsévolod A. / Solyon, Graciele J. P. / Pawlowsky, Urivald / Alekseev, Kirill P. / Zelinskaya, Elena V. / Tolmacheva, Natalia A. / Ribas, Helverton E. / Catai, Rodrigo E. / Romano, Cezar A.	Structure formation processes of composites on the base of ink rejected sludge	141-148
Singh, L. P. / Bhattacharyya, S. K. / Shah, S. P. / Mishra, G. / Sharma, U.	Studies on early stage hydration of tricalcium silicate incorporating silica nanoparticles: Part II	943-949
Wang, Her-Yung / Chen, Kuo-Wei	A study of the engineering properties of CLSM with a new type of slag	422-427
Fragata, Ana / Veiga, M. Rosário / Velosa, Ana	Substitution ventilated render systems for historic masonry: Salt crystallization tests evaluation	592-600
Mallawarachchi, D. R. / Amarasinghe, A. D. U. S. / Prashantha, M. A. B.	Suitability of Chitosan as an emulsifier for cationic bitumen emulsions and its behaviour as an additive to bitumen emulsion	1-6
Nguyen, Hoang-Anh / Chang, Ta-Peng / Shih, Jeng-Ywan / Chen, Chun-Tao / Nguyen, Tien-Dung	Sulfate resistance of low energy SFC no-cement mortar	239-243
Arora, Aashay / Sant, Gaurav / Neithalath, Narayanan	Ternary blends containing slag and interground/blended limestone: Hydration, strength, and pore structure	113-124
Eren Sarıcı, Didem	Thermal deterioration of marbles: Gloss, color changes	416-421
Shoukry, H. / Kotkata, M. F. / Abo-El-Enein, S. A. / Morsy, M. S. / Shebl, S. S.	Thermo-physical properties of nanostructured lightweight fiber reinforced cementitious composites	167-174
Caniato, M. / Bettarello, F. / Marsich, L. / Ferluga, A. / Sbaizero, O. / Schmid, C.	Time-depending performance of resilient layers under floating floors	226-232
Monteiro, Sandra R. S. / Dias, Alfredo M. P. G. / Lopes, Sergio M. R.	Transverse distribution of internal forces in timber–concrete floors under external point and line loads	1049-1059
Jasienko, Jerzy / Logoń, Dominik / Misztal, Witold	Trass-lime reinforced mortars in strengthening and reconstruction of historical masonry walls	884-892
Han, Ding / Zhu, Junhua / Li, Linglin / Pang, Huanping	Verification and application of two-dimensional slice identification method in three-dimensional mesostructure under different aggregate gradations and packing algorithms	843-851

Über diese
Datenseite
IssueID
22579
Veröffentlicht am:
15.12.2018
Geändert am:
30.06.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - Januar 2016

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - Januar 2016

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.