Construction and Building Materials - Dezember 2015

Erschienen:	Dezember 2015

Autor(en)	Titel	Seite(n)
Abbas, Yawar / Olthuis, Wouter / van den Berg, Albert	Activated carbon as a pseudo-reference electrode for electrochemical measurement inside concrete	194-200
Dong, Zuochao / Xia, Junwu / Fan, Chao / Cao, Jichang	Activity of calcined coal gangue fine aggregate and its effect on the mechanical behavior of cement mortar	63-69
Isla, Facundo / Ruano, Gonzalo / Luccioni, Bibiana	Analysis of steel fibers pull-out. Experimental study	183-193
Ji, Yanliang / Sun, Zhenping / Yang, Xu / Li, Chunjing / Tang, Xiaobo	Assessment and mechanism study of bleeding process in cement paste by 1H low-field NMR	255-261
Taffese, Woubishet Zewdu / Sistonen, Esko / Puttonen, Jari	CaPrM: Carbonation prediction model for reinforced concrete using machine learning methods	70-82
Li, Qiang / Yang, Huanhuan / Ni, Fujian / Ma, Xiang / Luo, Lihong	Cause analysis on permanent deformation for asphalt pavements using field cores	40-51
Moreno, Jose D. / Bonilla, Mercedes / Adam, José M. / Victoria Borrachero, M. / Soriano, Lourdes	Determining corrosion levels in the reinforcement rebars of buildings in coastal areas. A case study in the Mediterranean coastline	11-21
Guan, Cheng / Zhang, Houjiang / Zhou, Lujing / Wang, Xiping	Dynamic determination of modulus of elasticity of full-size wood composite panels using a vibration method	201-206
Afshinnia, Kaveh / Rangaraju, Prasada Rao	Efficiency of ternary blends containing fine glass powder in mitigating alkali–silica reaction	234-245
Ballesteros, Julian Eduardo Mejia / Santos, Sergio Francisco / Mármol, Gonzalo / Savastano, Holmer / Fiorelli, Juliano	Evaluation of cellulosic pulps treated by hornification as reinforcement of cementitious composites	83-90
Kong, Kanhchana / Ferrier, Emmanuel / Michel, Laurent / Agbossou, Amen	Experimental and analytical study of the mechanical behavior of heterogeneous glulam–UHPFRC beams assembled by bonding: Short- and long-term investigations	136-148
Norouzi, Hosain / Rostamiyan, Yasser	Experimental and numerical study of flatwise compression behavior of carbon fiber composite sandwich panels with new lattice cores	22-30
Jiang, Wei / Sha, Aimin / Xiao, Jingjing / Li, Yuliang / Huang, Yue	Experimental study on filtration effect and mechanism of pavement runoff in permeable asphalt pavement	102-110
Jo, Byung Wan / Chakraborty, Sumit / Sikandar, Muhammad Ali / Kim, Heon / Kim, Ki Heon	Hydrogen-rich water revealed benefits in controlling the physical and mechanical performances of cement mortar	31-39
Ashrafi, Mahdi / Woodsum, Christopher Japhet / Papadopoulos, Jim / Hamouda, Abdelmagid S. / Nayeb-Hashemi, Hamid / Vaziri, Ashkan	In situ strengthening of thin-wall structures using pressurized foam	298-304
Li, Zhengqi / Venkata, Harish Kizhakkumodom / Rangaraju, Prasada Rao	Influence of silica flour–silica fume combination on the properties of high performance cementitious mixtures at ambient temperature curing	225-233
Hussain, Raja Rizwan / Shuraim, Ahmed B. / Alhozaimy, Abdulrahman M. A.	Investigation for the impact of nature of coarse aggregate on the passive layer formation and corresponding corrosion of reinforcement bars in high performance concrete	52-62
Tam, Vivian W. Y. / Kotrayothar, Duangthidar / Xiao, Jianzhuang	Long-term deformation behaviour of recycled aggregate concrete	262-272
Mojsilović, Nebojša / Petrović, Miloš / Anglada, Xavier Riba	Masonry elements with multi-layer bed joints: Behaviour under monotonic and static-cyclic shear	149-162
Kizilkanat, Ahmet B. / Kabay, Nihat / Akyüncü, Veysel / Chowdhury, Swaptik / Akça, Abdullah H.	Mechanical properties and fracture behavior of basalt and glass fiber reinforced concrete: An experimental study	218-224
Veytskin, Yuriy / Bobko, Christopher / Castorena, Cassie / Kim, Y. Richard	Nanoindentation investigation of asphalt binder and mastic cohesion	163-171
Zarnani, Pouyan / Quenneville, Pierre	New design approach for controlling brittle failure modes of small-dowel-type connections in Cross-laminated Timber (CLT)	172-182
Wang, Zhiheng / Gao, Zizhen / Wang, Yunlu / Cao, Yu / Wang, Ganggang / Liu, Bin / Wang, Zheng	A new dynamic testing method for elastic, shear modulus and Poisson's ratio of concrete	129-135
Descantes, Yannick / Hamard, Erwan	Parameters influencing the polished stone value (PSV) of road surface aggregates	246-254
Bressi, Sara / Cavalli, Maria Chiara / Partl, Manfred N. / Tebaldi, Gabriele / Dumont, Andre Gilles / Poulikakos, Lily D.	Particle clustering phenomena in hot asphalt mixtures with high content of reclaimed asphalt pavements	207-217
Ghafoori Roozbahany, Ehsan / Partl, Manfred N. / Guarin, Alvaro	Particle flow during compaction of asphalt model materials	273-284
Hidalgo, Juan P. / Welch, Stephen / Torero, José L.	Performance criteria for the fire safe use of thermal insulation in buildings	285-297
Sikkema, J. K. / Ong, S. K. / Alleman, J. E.	Photocatalytic concrete pavements: Laboratory investigation of NO oxidation rate under varied environmental conditions	305-314
Liu, Kai / Wang, Ming / Wang, Yaan	Seismic retrofitting of rural rammed earth buildings using externally bonded fibers	91-101
Menna, Costantino / Asprone, Domenico / Durante, Massimo / Zinno, Alberto / Balsamo, Alberto / Prota, Andrea	Structural behaviour of masonry panels strengthened with an innovative hemp fibre composite grid	111-121
Li, Yue / Liu, Xiongfei / Yuan, Junjie / Wu, Miaoke	Toughness improvement of epoxy resin mortar by incorporation of ground calcium carbonate	122-128
Zhang, Y. / Verwaal, W. / van de Ven, M. F. C. / Molenaar, A. A. A. / Wu, S. P.	Using high-resolution industrial CT scan to detect the distribution of rejuvenation products in porous asphalt concrete	1-10

Autor(en)

Titel

Seite(n)

Abbas, Yawar / Olthuis, Wouter / van den Berg, Albert

Activated carbon as a pseudo-reference electrode for electrochemical measurement inside concrete

194-200

Dong, Zuochao / Xia, Junwu / Fan, Chao / Cao, Jichang

Activity of calcined coal gangue fine aggregate and its effect on the mechanical behavior of cement mortar

63-69

Isla, Facundo / Ruano, Gonzalo / Luccioni, Bibiana

Analysis of steel fibers pull-out. Experimental study

183-193

Ji, Yanliang / Sun, Zhenping / Yang, Xu / Li, Chunjing / Tang, Xiaobo

Assessment and mechanism study of bleeding process in cement paste by 1H low-field NMR

255-261

Taffese, Woubishet Zewdu / Sistonen, Esko / Puttonen, Jari

CaPrM: Carbonation prediction model for reinforced concrete using machine learning methods

70-82

Li, Qiang / Yang, Huanhuan / Ni, Fujian / Ma, Xiang / Luo, Lihong

Cause analysis on permanent deformation for asphalt pavements using field cores

40-51

Moreno, Jose D. / Bonilla, Mercedes / Adam, José M. / Victoria Borrachero, M. / Soriano, Lourdes

Determining corrosion levels in the reinforcement rebars of buildings in coastal areas. A case study in the Mediterranean coastline

11-21

Guan, Cheng / Zhang, Houjiang / Zhou, Lujing / Wang, Xiping

Dynamic determination of modulus of elasticity of full-size wood composite panels using a vibration method

201-206

Afshinnia, Kaveh / Rangaraju, Prasada Rao

Efficiency of ternary blends containing fine glass powder in mitigating alkali–silica reaction

234-245

Ballesteros, Julian Eduardo Mejia / Santos, Sergio Francisco / Mármol, Gonzalo / Savastano, Holmer / Fiorelli, Juliano

Evaluation of cellulosic pulps treated by hornification as reinforcement of cementitious composites

83-90

Kong, Kanhchana / Ferrier, Emmanuel / Michel, Laurent / Agbossou, Amen

Experimental and analytical study of the mechanical behavior of heterogeneous glulam–UHPFRC beams assembled by bonding: Short- and long-term investigations

136-148

Norouzi, Hosain / Rostamiyan, Yasser

Experimental and numerical study of flatwise compression behavior of carbon fiber composite sandwich panels with new lattice cores

22-30

Jiang, Wei / Sha, Aimin / Xiao, Jingjing / Li, Yuliang / Huang, Yue

Experimental study on filtration effect and mechanism of pavement runoff in permeable asphalt pavement

102-110

Jo, Byung Wan / Chakraborty, Sumit / Sikandar, Muhammad Ali / Kim, Heon / Kim, Ki Heon

Hydrogen-rich water revealed benefits in controlling the physical and mechanical performances of cement mortar

31-39

Ashrafi, Mahdi / Woodsum, Christopher Japhet / Papadopoulos, Jim / Hamouda, Abdelmagid S. / Nayeb-Hashemi, Hamid / Vaziri, Ashkan

In situ strengthening of thin-wall structures using pressurized foam

298-304

Li, Zhengqi / Venkata, Harish Kizhakkumodom / Rangaraju, Prasada Rao

Influence of silica flour–silica fume combination on the properties of high performance cementitious mixtures at ambient temperature curing

225-233

Hussain, Raja Rizwan / Shuraim, Ahmed B. / Alhozaimy, Abdulrahman M. A.

Investigation for the impact of nature of coarse aggregate on the passive layer formation and corresponding corrosion of reinforcement bars in high performance concrete

52-62

Tam, Vivian W. Y. / Kotrayothar, Duangthidar / Xiao, Jianzhuang

Long-term deformation behaviour of recycled aggregate concrete

262-272

Mojsilović, Nebojša / Petrović, Miloš / Anglada, Xavier Riba

Masonry elements with multi-layer bed joints: Behaviour under monotonic and static-cyclic shear

149-162

Kizilkanat, Ahmet B. / Kabay, Nihat / Akyüncü, Veysel / Chowdhury, Swaptik / Akça, Abdullah H.

Mechanical properties and fracture behavior of basalt and glass fiber reinforced concrete: An experimental study

218-224

Veytskin, Yuriy / Bobko, Christopher / Castorena, Cassie / Kim, Y. Richard

Nanoindentation investigation of asphalt binder and mastic cohesion

163-171

Zarnani, Pouyan / Quenneville, Pierre

New design approach for controlling brittle failure modes of small-dowel-type connections in Cross-laminated Timber (CLT)

172-182

Wang, Zhiheng / Gao, Zizhen / Wang, Yunlu / Cao, Yu / Wang, Ganggang / Liu, Bin / Wang, Zheng

A new dynamic testing method for elastic, shear modulus and Poisson's ratio of concrete

129-135

Descantes, Yannick / Hamard, Erwan

Parameters influencing the polished stone value (PSV) of road surface aggregates

246-254

Bressi, Sara / Cavalli, Maria Chiara / Partl, Manfred N. / Tebaldi, Gabriele / Dumont, Andre Gilles / Poulikakos, Lily D.

Particle clustering phenomena in hot asphalt mixtures with high content of reclaimed asphalt pavements

207-217

Ghafoori Roozbahany, Ehsan / Partl, Manfred N. / Guarin, Alvaro

Particle flow during compaction of asphalt model materials

273-284

Hidalgo, Juan P. / Welch, Stephen / Torero, José L.

Performance criteria for the fire safe use of thermal insulation in buildings

285-297

Sikkema, J. K. / Ong, S. K. / Alleman, J. E.

Photocatalytic concrete pavements: Laboratory investigation of NO oxidation rate under varied environmental conditions

305-314

Liu, Kai / Wang, Ming / Wang, Yaan

Seismic retrofitting of rural rammed earth buildings using externally bonded fibers

91-101

Menna, Costantino / Asprone, Domenico / Durante, Massimo / Zinno, Alberto / Balsamo, Alberto / Prota, Andrea

Structural behaviour of masonry panels strengthened with an innovative hemp fibre composite grid

111-121

Li, Yue / Liu, Xiongfei / Yuan, Junjie / Wu, Miaoke

Toughness improvement of epoxy resin mortar by incorporation of ground calcium carbonate

122-128

Zhang, Y. / Verwaal, W. / van de Ven, M. F. C. / Molenaar, A. A. A. / Wu, S. P.

Using high-resolution industrial CT scan to detect the distribution of rejuvenation products in porous asphalt concrete

1-10

Anzeige

Construction and Building Materials - Dezember 2015

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - Dezember 2015

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.