Construction and Building Materials - Oktober 2015

Erschienen:	Oktober 2015

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Wahengbam, Rekha Devi / Rajbongshi, Pabitra	An approach for dynamic stiffness evaluation in asphalt concrete	541-549
Morales-Conde, M. J. / Rodríguez-Liñán, C. / Rubio-de Hita, P.	Bending and shear reinforcements for timber beams using GFRP plates	461-472
Uygunoğlu, Tayfun / Gunes, Ibrahim	Biogenic corrosion on ribbed reinforcing steel bars with different bending angles in sewage systems	530-540
Chen, Dar Hao / Won, Moon	CAM and SMA mixtures to delay reflective cracking on PCC pavements	226-237
Chiarelli, Nicoletta / Miriello, Domenico / Bianchi, Giovanna / Fichera, Giuseppe / Giamello, Marco / Memmi, Isabella Turbanti	Characterisation of ancient mortars from the S. Niccolò archaeological complex in Montieri (Tuscany – Italy)	442-460
Kim, Hyeong-Ki	Chloride penetration monitoring in reinforced concrete structure using carbon nanotube/cement composite	29-36
Flores Medina, N. / Barluenga, G. / Hernández-Olivares, F.	Combined effect of Polypropylene fibers and Silica Fume to improve the durability of concrete with natural Pozzolans blended cement	556-566
Xu, Qingfeng / Chen, Lingzhu / Harries, Kent A. / Zhang, Fuwen / Liu, Qiong / Feng, Jinghui	Combustion and charring properties of five common constructional wood species from cone calorimeter tests	416-427
Gulotta, Davide / Goidanich, Sara / Tedeschi, Cristina / Toniolo, Lucia	Commercial NHL-containing mortars for the preservation of historical architecture. Part 2: Durability to salt decay	198-208
Rhee, Inkyu / Kim, Yoong Ahm / Shin, Gun-Ok / Kim, Ji Hoon / Muramatsu, Hiroyuki	Compressive strength sensitivity of cement mortar using rice husk-derived graphene with a high specific surface area	189-197
Guo, Hui / Guo, Weiguo / Shi, Yajie	Computational modeling of the mechanical response of lightweight foamed concrete over a wide range of temperatures and strain rates	622-631
Sadiq, K. M. / Bzeni, D. K. H. / Shaikh, F. U. A.	Deflection hardening behaviour of jute strands reinforced lightweight cementitious composite	102-111
Kassem, Emad / Liu, Wenting / Scullion, Tom / Masad, Eyad / Chowdhury, Arif	Development of compaction monitoring system for asphalt pavements	334-345
Dogan, U. Anil / Ozkul, M. Hulusi	The effect of cement type on long-term transport properties of self-compacting concretes	641-647
Zhao, Qingxin / Liu, Xiaochen / Jiang, Jinyang	Effect of curing temperature on creep behavior of fly ash concrete	326-333
Shang, Yu / Zhang, Dong / Yang, Chao / Liu, Yanyun / Liu, Yong	Effect of graphene oxide on the rheological properties of cement pastes	20-28
Ke, Xing / Hou, Haobo / Zhou, Min / Wang, Yan / Zhou, Xian	Effect of particle gradation on properties of fresh and hardened cemented paste backfill	378-382
Patel, V. J. / Van, B. C. / Henry, R. S. / Clifton, G. C.	Effect of reinforcing steel bond on the cracking behaviour of lightly reinforced concrete members	238-247
Sanjuán, Miguel Ángel / Argiz, Cristina / Gálvez, Jaime C. / Moragues, Amparo	Effect of silica fume fineness on the improvement of Portland cement strength performance	55-64
Liu, Jing / Zheng, Xinguo / Li, Shuming / Ding, Rensheng / Zeng, Zhi / Weng, Zhicai / Yang, Dejun	Effect of the stabilizer on bubble stability and homogeneity of cement emulsified asphalt mortar in slab ballastless track	135-146
Mo, Liwu / Zhang, Feng / Deng, Min	Effects of carbonation treatment on the properties of hydrated fly ash-MgO-Portland cement blends	147-154
Behnood, Ali / Modiri Gharehveran, Mahsa / Gozali Asl, Farhad / Ameri, Mahmoud	Effects of copper slag and recycled concrete aggregate on the properties of CIR mixes with bitumen emulsion, rice husk ash, Portland cement and fly ash	172-180
Blackburn, B. Paige / Tatar, Jovan / Douglas, Elliot P. / Hamilton, H. R.	Effects of hygrothermal conditioning on epoxy adhesives used in FRP composites	679-689
Luo, Hong / Su, Huaizhi / Dong, Chaofang / Xiao, Kui / Li, Xiaogang	Electrochemical and passivation behavior investigation of ferritic stainless steel in alkaline environment	502-507
Moghaddam, Taher Baghaee / Soltani, Mehrtash / Karim, Mohamed Rehan / Shamshirband, Shahaboddin / Petković, Dalibor / Baaj, Hassan	Estimation of the rutting performance of Polyethylene Terephthalate modified asphalt mixtures by adaptive neuro-fuzzy methodology	550-555
Chun, Sanghyun / Kim, Kukjoo / Greene, James / Choubane, Bouzid	Evaluation of interlayer bonding condition on structural response characteristics of asphalt pavement using finite element analysis and full-scale field tests	307-318
Pedret Rodés, J. / Pérez-Gracia, V. / Martínez-Reguero, A.	Evaluation of the GPR frequency spectra in asphalt pavement assessment	181-188
Peng, Hui / Hao, Haixia / Zhang, Jianren / Liu, Yang / Cai, C. S.	Experimental investigation of the bond behavior of the interface between near-surface-mounted CFRP strips and concrete	11-19
Chen, Zhihua / Yu, Yujie / Wang, Xiaodun / Wu, Xiaofeng / Liu, Hongbo	Experimental research on bending performance of structural cable	279-288
Li, Yue / Li, Jiaqi / Wan, Yuhong / Xu, Zhiyuan	Experimental study of light transmitting cement-based material (LTCM)	319-325
Rao, S. / Silva, P. / de Brito, J.	Experimental study of the mechanical properties and durability of self-compacting mortars with nano materials (SiO2 and TiO2)	508-517
Li, Yue / Li, Yaqiang / Shi, Tongfei / Li, Jiaqi	Experimental study on mechanical properties and fracture toughness of magnesium phosphate cement	346-352
Liu, Donghai / Li, Zilong / Liu, Jinlong	Experimental study on real-time control of roller compacted concrete dam compaction quality using unit compaction energy indices	567-575
Aira, J. R. / Arriaga, F. / Íñiguez-González, G. / Guaita, M.	Failure modes in halved and tabled tenoned timber scarf joint by tension test	360-367
Limbachiya, Vireen / Ganjian, Eshmaiel / Claisse, Peter	The impact of variation in chemical and physical properties of PFA and BPD semi-dry cement paste on strength properties	248-255
Lenormand, Thibault / Roziere, Emmanuel / Loukili, Ahmed / Staquet, Stéphanie	Incorporation of treated municipal solid waste incineration electrostatic precipitator fly ash as partial replacement of Portland cement: Effect on early age behaviour and mechanical properties	256-269
Puerta-Falla, Guillermo / Kumar, Aditya / Gomez-Zamorano, Lauren / Bauchy, Mathieu / Neithalath, Narayanan / Sant, Gaurav	The influence of filler type and surface area on the hydration rates of calcium aluminate cement	657-665
Kamseu, Elie / Ponzoni, Chiara / Tippayasam, Chayanee / Taurino, Rosa / Chaysuwan, Duangrudee / Bignozzi, Maria Chiara / Barbieri, Luisa / Leonelli, Cristina	Influence of fine aggregates on the microstructure, porosity and chemico-mechanical stability of inorganic polymer concretes	473-483
Gao, Yangming / Dong, Mansheng / Li, Linglin / Wang, Lina / Sun, Zhibin	Interface effects on the creep characteristics of asphalt concrete	591-598
Zou, Dinghua / Zhang, Haoran / Wang, Yuli / Zhu, Jianping / Guan, Xuemao	Internal curing of mortar with low water to cementitious materials ratio using a normal weight porous aggregate	209-216
Xu, Song / Li, Lian / Yu, Jianying / Zhang, Canlin / Zhou, Ji / Sun, Yubin	Investigation of the ultraviolet aging resistance of organic layered double hydroxides modified bitumen	127-134
Salazar-Carreño, Dimelsa / García-Cáceres, Rafael Guillermo / Ortiz-Rodríguez, Oscar Orlando	Laboratory processing of Colombian rice husk for obtaining amorphous silica as concrete supplementary cementing material	65-75
Diamanti, Maria Vittoria / Paolini, Riccardo / Rossini, Marta / Aslan, Aysegul Basak / Zinzi, Michele / Poli, Tiziana / Pedeferri, Maria Pia	Long term self-cleaning and photocatalytic performance of anatase added mortars exposed to the urban environment	270-278
Pehlivanlı, Zühtü Onur / Uzun, İbrahim / Demir, İlhami	Mechanical and microstructural features of autoclaved aerated concrete reinforced with autoclaved polypropylene, carbon, basalt and glass fiber	428-433
Oktay, Hasan / Yumrutaş, Recep / Akpolat, Abdullah	Mechanical and thermophysical properties of lightweight aggregate concretes	217-225
Vardhan, Kirti / Goyal, Shweta / Siddique, Rafat / Singh, Malkit	Mechanical properties and microstructural analysis of cement mortar incorporating marble powder as partial replacement of cement	615-621
Feng, Pan / Garboczi, Edward J. / Miao, Changwen / Bullard, Jeffrey W.	Microstructural origins of cement paste degradation by external sulfate attack	391-403
Brenna, A. / Lazzari, L. / Ormellese, M.	Monitoring chloride-induced corrosion of carbon steel tendons in concrete using a multi-electrode system	434-441
Hoang, Quoc Gia / Kaci, Abdelhak / Kadri, El-Hadj / Gallias, Jean-Louis	A new methodology for characterizing segregation of cement grouts during rheological tests	119-126
Sun, Yuyan / Yu, Zhiwu / Wang, Ziguo / Liu, Xuemei	Novel protective covering to enhance concrete resistance against projectile impact	484-490
Sun, Junzu / Huang, Qiao / Ren, Yuan	Performance deterioration of corroded RC beams and reinforcing bars under repeated loading	404-415
Naganathan, Sivakumar / Mohamed, Almamon Yousef Omer / Mustapha, Kamal Nasharuddin	Performance of bricks made using fly ash and bottom ash	576-580
Krzemień, Katarzyna / Hager, Izabela	Post-fire assessment of mechanical properties of concrete with the use of the impact-echo method	155-163
Saikia, Nabajyoti / Mertens, Gilles / Van Balen, Koenraad / Elsen, Jan / Van Gerven, Tom / Vandecasteele, Carlo	Pre-treatment of municipal solid waste incineration (MSWI) bottom ash for utilisation in cement mortar	76-85
Granata, Michele Fabio	Pumice powder as filler of self-compacting concrete	581-590
Criado, M. / Martinez-Ramirez, S. / Bastidas, J. M.	A Raman spectroscopy study of steel corrosion products in activated fly ash mortar containing chlorides	383-390
Bogutyn, Shannon / Arboleda, Catalina / Bordelon, Amanda / Tikalsky, Paul	Rejuvenation techniques for mortar containing photocatalytic TiO2 material	96-101
Argane, R. / Benzaazoua, M. / Hakkou, R. / Bouamrane, A.	Reuse of base-metal tailings as aggregates for rendering mortars: Assessment of immobilization performances and environmental behavior	296-306
Wang, Dehui / Shi, Caijun / Wu, Zemei / Xiao, Jianfan / Huang, Zhengyu / Fang, Zhi	A review on ultra high performance concrete: Part II. Hydration, microstructure and properties	368-377
Li, Ruixia / Karki, Pravat / Hao, Peiwen / Bhasin, Amit	Rheological and low temperature properties of asphalt composites containing rock asphalts	47-54
Choi, Se-Jin / Choi, Jeong-Il / Song, Jin-Kyu / Lee, Bang Yeon	Rheological and mechanical properties of fiber-reinforced alkali-activated composite	112-118
Zhang, Jun / Wang, Jiahe / Han, Yudong	Simulation of moisture field of concrete with pre-soaked lightweight aggregate addition	599-614
El Refai, Ahmed / Abed, Farid / Al-Rahmani, Abdullah	Structural performance and serviceability of concrete beams reinforced with hybrid (GFRP and steel) bars	518-529
Torsæter, M. / Todorovic, J. / Lavrov, A.	Structure and debonding at cement–steel and cement–rock interfaces: Effect of geometry and materials	164-171
Xue, Xiao / Yang, Jingna / Zhang, Weidong / Jiang, Lihong / Qu, Jian / Xu, Lijin / Zhang, Hongqiang / Song, Jianrong / Zhang, Rongpu / Li, Yanwen / Qin, Jie / Zhang, Ziying	The study of an energy efficient cool white roof coating based on styrene acrylate copolymer and cement for waterproofing purpose—Part II: Mechanical and water impermeability properties	666-672
Hunag, Li-Jeng / Wang, Her-Yung / Wang, Shi-Yang	A study of the durability of recycled green building materials in lightweight aggregate concrete	353-359
Carro-López, Diego / González-Fonteboa, Belén / de Brito, Jorge / Martínez-Abella, Fernando / González-Taboada, Iris / Silva, Pedro	Study of the rheology of self-compacting concrete with fine recycled concrete aggregates	491-501
Saboo, Nikhil / Kumar, Praveen	A study on creep and recovery behavior of asphalt binders	632-640
Ou, Yunfu / Zhu, Deju	Tensile behavior of glass fiber reinforced composite at different strain rates and temperatures	648-656
Haach, Vladimir G. / Juliani, Lucas Marrara / Roz, Mateus Ravanini Da	Ultrasonic evaluation of mechanical properties of concretes produced with high early strength cement	1-10
Sharma, Ashutosh / Sharma, Shruti / Sharma, Sandeep / Mukherjee, Abhijit	Ultrasonic guided waves for monitoring corrosion of FRP wrapped concrete structures	690-702
High, Cory / Seliem, Hatem M. / El-Safty, Adel / Rizkalla, Sami H.	Use of basalt fibers for concrete structures	37-46
Zaetang, Yuwadee / Wongsa, Ampol / Sata, Vanchai / Chindaprasirt, Prinya	Use of coal ash as geopolymer binder and coarse aggregate in pervious concrete	289-295
Antico, F. C. / De la Varga, I. / Esmaeeli, H. S. / Nantung, T. E. / Zavattieri, P. D. / Weiss, W. J.	Using accelerated pavement testing to examine traffic opening criteria for concrete pavements	86-95
Atis, C. D. / Görür, E. B. / Karahan, O. / Bilim, C. / İlkentapar, S. / Luga, E.	Very high strength (120MPa) class F fly ash geopolymer mortar activated at different NaOH amount, heat curing temperature and heat curing duration	673-678

Über diese
Datenseite
IssueID
22570
Veröffentlicht am:
15.12.2018
Geändert am:
30.06.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - Oktober 2015

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - Oktober 2015

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.