Construction and Building Materials - August 2014

Erschienen:	August 2014

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Behnia, Arash / Chai, Hwa Kian / Shiotani, Tomoki	Advanced structural health monitoring of concrete structures with the aid of acoustic emission	282-302
Dan, Lv / Chuanfeng, Zheng / Yong, Qin / Heng, Bi / Keyao, Li / Junfei, Huang	Analysing the effects of the mesoscopic characteristics of mineral powder fillers on the cohesive strength of asphalt mortars at low temperatures	330-337
Magallanes-Rivera, R. X. / Escalante-García, J. I.	Anhydrite/hemihydrate-blast furnace slag cementitious composites: Strength development and reactivity	20-28
Loganina, Valentina I. / Simonov, Evgenij E. / Jezierski, Walery / Małaszkiewicz, Dorota	Application of activated diatomite for dry lime mixes	29-37
Lotfy, Abdurrahmaan / Hossain, Khandaker M. A. / Lachemi, Mohamed	Application of statistical models in proportioning lightweight self-consolidating concrete with expanded clay aggregates	450-469
Pacheco, José / Savija, Branko / Schlangen, Erik / Polder, Rob B.	Assessment of cracks in reinforced concrete by means of electrical resistance and image analysis	417-426
Kameche, Z. A. / Ghomari, F. / Choinska, M. / Khelidj, A.	Assessment of liquid water and gas permeabilities of partially saturated ordinary concrete	551-565
Bogas, J. Alexandre / Gomes, M. Glória / Real, Sofia	Bonding of steel reinforcement in structural expanded clay lightweight aggregate concrete: The influence of failure mechanism and concrete composition	350-359
Stefanidou, M.	Cement-based renders with insulating properties	427-431
Salih, Moslih Amer / Abang Ali, Abang Abdullah / Farzadnia, Nima	Characterization of mechanical and microstructural properties of palm oil fuel ash geopolymer cement paste	592-603
Singh, M. / Arbad, B. R.	Characterization of traditional mud mortar of the decorated wall surfaces of Ellora caves	384-395
Ranjbar, Navid / Mehrali, Mehdi / Alengaram, U. Johnson / Metselaar, Hendrik Simon Cornelis / Jumaat, Mohd Zamin	Compressive strength and microstructural analysis of fly ash/palm oil fuel ash based geopolymer mortar under elevated temperatures	114-121
Dubois, Eric / Mehta, Yusuf / Nolan, Aaron	Correlation between multiple stress creep recovery (MSCR) results and polymer modification of binder	184-190
Berto, Luisa / Saetta, Anna / Scotta, Roberto / Talledo, Diego	A coupled damage model for RC structures: Proposal for a frost deterioration model and enhancement of mixed tension domain	310-320
Sun, Ming-qing / Liew, Richard J. Y. / Zhang, Min-Hong / Li, Wei	Development of cement-based strain sensor for health monitoring of ultra high strength concrete	630-637
Van Belleghem, M. / Steeman, M. / Janssens, A. / De Paepe, M.	Drying behaviour of calcium silicate	507-517
Zhu, Huajun / Zhang, Zuhua / Zhu, Yingcan / Tian, Liang	Durability of alkali-activated fly ash concrete: Chloride penetration in pastes and mortars	51-59
Munafò, Placido / Quagliarini, Enrico / Goffredo, Giovanni Battista / Bondioli, Federica / Licciulli, Antonio	Durability of nano-engineered TiO2 self-cleaning treatments on limestone	218-231
Andreozzi, Laura / Briccoli Bati, Silvia / Fagone, Mario / Ranocchiai, Giovanna / Zulli, Fabio	Dynamic torsion tests to characterize the thermo-viscoelastic properties of polymeric interlayers for laminated glass	1-13
Pérez-Jiménez, Félix / Martìnez, Adriana H. / Miró, Rodrigo / Hernández-Barrera, Diana / Araya-Zamorano, Loreto	Effect of compaction temperature and procedure on the design of asphalt mixtures using Marshall and gyratory compactors	264-269
Yu, R. / Spiesz, P. / Brouwers, H. J. H.	Effect of nano-silica on the hydration and microstructure development of Ultra-High Performance Concrete (UHPC) with a low binder amount	140-150
Toraldo, Emanuele / Mariani, Edoardo	Effects of polymer additives on bituminous mixtures	38-42
Xu, Dongyu / Huang, Shifeng / Cheng, Xin	Electromechanical impedance spectra investigation of impedance-based PZT and cement/polymer based piezoelectric composite sensors	543-550
Choi, Pangil / Yun, Kyong-Ku	Experimental analysis of latex-solid content effect on early-age and autogenous shrinkage of very-early strength latex-modified concrete	396-404
Latour, M. / Piluso, V. / Rizzano, G.	Experimental analysis on friction materials for supplemental damping devices	159-176
Moghaddam, Taher Baghaee / Soltani, Mehrtash / Karim, Mohamed Rehan	Experimental characterization of rutting performance of Polyethylene Terephthalate modified asphalt mixtures under static and dynamic loads	487-494
Sicat, Evdon / Gong, Fuyuan / Ueda, Tamon / Zhang, Dawei	Experimental investigation of the deformational behavior of the interfacial transition zone (ITZ) in concrete during freezing and thawing cycles	122-131
Ji, Yong-sheng / Wu, Meng / Ding, Beidou / Liu, Fang / Gao, Furong	The experimental investigation of width of semi-carbonation zone in carbonated concrete	67-75
Li, Hui / Harvey, John / Ge, Zhesheng	Experimental investigation on evaporation rate for enhancing evaporative cooling effect of permeable pavement materials	367-375
Li, Yue / Sun, Jia / Chen, Bing	Experimental study of magnesia and M/P ratio influencing properties of magnesium phosphate cement	177-183
Fan, Shijian / Chen, Bing	Experimental study of phosphate salts influencing properties of magnesium phosphate cement	480-486
Janaraj, Thangarajah / Dhanasekar, Manicka	Finite element analysis of the in-plane shear behaviour of masonry panels confined with reinforced grouted cores	495-506
Garcia-Taengua, E. / Arango, S. / Martí-Vargas, J. R. / Serna, P.	Flexural creep of steel fiber reinforced concrete in the cracked state	321-329
Yin, Anyi / Yang, Xinhua / Zeng, Guowei / Gao, Hu	Fracture simulation of pre-cracked heterogeneous asphalt mixture beam with movable three-point bending load	232-242
Hong, Li / Gu, Xianglin / Lin, Feng	Influence of aggregate surface roughness on mechanical properties of interface and concrete	338-349
Saussaye, Lucile / Boutouil, Mohamed / Baraud, Fabienne / Leleyter, Lydia	Influence of anions on the geotechnical properties of soils treated with hydraulic binders: Individual and coupling effects	303-309
Andrejkovičová, S. / Velosa, A. L. / Ferraz, E. / Rocha, F.	Influence of clay minerals addition on mechanical properties of air lime–metakaolin mortars	132-139
Pascual-Muñoz, P. / Castro-Fresno, D. / Carpio, J. / Zamora-Barraza, D.	Influence of early colour degradation of asphalt pavements on their thermal behaviour	432-439
Senff, L. / Modolo, R. C. E. / Santos Silva, A. / Ferreira, V. M. / Hotza, D. / Labrincha, J. A.	Influence of red mud addition on rheological behavior and hardened properties of mortars	84-91
Sebaibi, Nassim / Benzerzour, Mahfoud / Abriak, Nor Edine	Influence of the distribution and orientation of fibres in a reinforced concrete with waste fibres and powders	254-263
Lemougna, Patrick Ninla / Madi, Achille Balo / Kamseu, Elie / Melo, Uphie Chinje / Delplancke, Marie-Paule / Rahier, Hubert	Influence of the processing temperature on the compressive strength of Na activated lateritic soil for building applications	60-66
Senff, L. / Tobaldi, D. M. / Lemes-Rachadel, P. / Labrincha, J. A. / Hotza, D.	The influence of TiO2 and ZnO powder mixtures on photocatalytic activity and rheological behavior of cement pastes	191-200
Han, Fangyu / Chen, Huisu / Jiang, Kefeng / Zhang, Wulong / Lv, Tao / Yang, Yujie	Influences of geometric patterns of 3D spacer fabric on tensile behavior of concrete canvas	620-629
Huang, Hong / Shen, Xiao-dong	Interaction effect of triisopropanolamine and glucose on the hydration of Portland cement	360-366
Kashani, Alireza / Provis, John L. / Qiao, Greg G. / van Deventer, Jannie S. J.	The interrelationship between surface chemistry and rheology in alkali activated slag paste	583-591
Manalo, Allan C. / Karunasena, Warna / Sirimanna, Chamila / Maranan, Ginghis B.	Investigation into fibre composites jacket with an innovative joining system	270-281
Rutherford, Tyler / Wang, Zhenjun / Shu, Xiang / Huang, Baoshan / Clarke, David	Laboratory investigation into mechanical properties of cement emulsified asphalt mortar	76-83
Hou, Yueqin / Ji, Xiaoping / Su, Xiuli / Zhang, Wengang / Liu, Lingqin	Laboratory investigations of activated recycled concrete aggregate for asphalt treated base	535-542
Bogas, J. Alexandre / de Brito, J. / Cabaço, J.	Long-term behaviour of concrete produced with recycled lightweight expanded clay aggregate concrete	470-479
Huda, Sumaiya Binte / Shahria Alam, M.	Mechanical behavior of three generations of 100% repeated recycled coarse aggregate concrete	574-582
Alawad, O. A. / Alhozaimy, A. / Jaafar, M. S. / Al-Negheimish, A. / Aziz, F. N. A.	Microstructure analyses of autoclaved ground dune sand–Portland cement paste	14-19
Bai, Fan / Yang, Xinhua / Yin, Anyi / Zeng, Guowei	Modified Cross model for predicting long-term creep behavior of sand asphalt	43-50
Miranda Vidales, Juana María / Narváez Hernández, Lilia / Tapia López, Jesus Ivan / Martínez Flores, Esperanza Elizabeth / Hernández, Luis Salvador	Polymer mortars prepared using a polymeric resin and particles obtained from waste pet bottle	376-383
Wang, Wen / Zhang, Wei / Zhang, Shifeng / Li, Jianzhang	Preparation and characterization of microencapsulated ammonium polyphosphate with UMF and its application in WPCs	151-158
Silva, R. V. / de Brito, J. / Dhir, R. K.	Properties and composition of recycled aggregates from construction and demolition waste suitable for concrete production	201-217
Ling, Zhibin / Yang, Huifeng / Liu, Weiqing / Lu, Weidong / Zhou, Ding / Wang, Lu	Pull-out strength and bond behaviour of axially loaded rebar glued-in glulam	440-449
Youm, Kwang-Soo / Kim, Jung J. / Moon, Jiho	Punching shear failure of slab with lightweight aggregate concrete (LWAC) and low reinforcement ratio	92-102
Romagnoli, M. / Sassatelli, P. / Lassinantti Gualtieri, M. / Tari, G.	Rheological characterization of fly ash-based suspensions	526-534
Pinilla Melo, Javier / Sepulcre Aguilar, Alberto / Hernández Olivares, Francisco	Rheological properties of aerated cement pastes with fly ash, metakaolin and sepiolite additions	566-573
Babaeidarabad, Saman / Arboleda, Diana / Loreto, Giovanni / Nanni, Antonio	Shear strengthening of un-reinforced concrete masonry walls with fabric-reinforced-cementitious-matrix	243-253
Afefy, Hamdy Mohy El-Din / Mahmoud, Mohamed Hussein	Structural performance of RC slabs provided by pre-cast ECC strips in tension cover zone	103-113
Dębska, Bernardeta / Lichołai, Lech	A study of the effect of corrosive solutions on selected physical properties of modified epoxy mortars	604-611
Collet, Florence / Pretot, Sylvie	Thermal conductivity of hemp concretes: Variation with formulation, density and water content	612-619
Franzoni, Elisa / Gentilini, Cristina / Graziani, Gabriela / Bandini, Simone	Towards the assessment of the shear behaviour of masonry in on-site conditions: A study on dry and salt/water conditioned brick masonry triplets	405-416
Yim, Hong Jae / Kim, Jae Hong / Shah, Surendra P.	Ultrasonic monitoring of the setting of cement-based materials: Frequency dependence	518-525

Über diese
Datenseite
IssueID
22540
Veröffentlicht am:
15.12.2018
Geändert am:
30.06.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - August 2014

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - August 2014

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.