Construction and Building Materials - November 2013

Erschienen:	November 2013

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Wan, Keshu / Xu, Qiong / Li, Lin / Sun, Wei	3D porosity distribution of partly calcium leached cement paste	11-15
Bollas, K. / Papasalouros, D. / Kourousis, D. / Anastasopoulos, A.	Acoustic emission monitoring of wheel sets on moving trains	1266-1272
Hailesilassie, Biruk W. / Partl, Manfred N.	Adhesive blister propagation under an orthotropic bituminous waterproofing membrane	1171-1178
Estévez Cimadevila, Javier / Otero Chans, Dolores / Martín Gutiérrez, Emilio	Adhesive multi-bulbs: A novel anchoring system using threaded steel rods glued into wood	131-136
Giovannacci, D. / Leclaire, C. / Horgnies, M. / Ellmer, M. / Mertz, J. D. / Orial, G. / Chen, J. / Bousta, F.	Algal colonization kinetics on roofing and façade tiles: Influence of physical parameters	670-676
Jonaitis, B. / Marciukaitis, G. / Valivonis, J.	Analysis of the mechanics of carbamide induced destruction of concrete and ceramic bricks	917-924
Liu, Zhiyong / Zhang, Yunsheng / Liu, Laibao / Jiang, Qian	An analytical model for determining the relative electrical resistivity of cement paste and C–S–H gel	647-655
Safehian, Majid / Ramezanianpour, Ali Akbar	Assessment of service life models for determination of chloride penetration into silica fume concrete in the severe marine environmental condition	287-294
Zhou, Wei / Hu, Haibo / Zheng, Wenzhong	Bearing capacity of reactive powder concrete reinforced by steel fibers	1179-1186
Achal, Varenyam / Mukerjee, Abhijeet / Sudhakara Reddy, M.	Biogenic treatment improves the durability and remediates the cracks of concrete structures	1-5
Zhao, Yuxi / Lin, Hongwei / Wu, Kang / Jin, Weiliang	Bond behaviour of normal/recycled concrete and corroded steel bars	348-359
Li, Zaibo / Zhao, Sanyin / Zhao, Xuguang / He, Tusheng	Cementitious property modification of basic oxygen furnace steel slag	575-579
Luo, Xue / Luo, Rong / Lytton, Robert L.	Characterization of recovery properties of asphalt mixtures	610-621
Carmona, Sergio / Aguado, Antonio / Molins, Climent	Characterization of the properties of steel fiber reinforced concrete by means of the generalized Barcelona test	592-600
Kim, Kyuhun / Shin, Myoungsu / Cha, Soowon	Combined effects of recycled aggregate and fly ash towards concrete sustainability	499-507
Mohd Hasan, Mohd Rosli / Goh, Shu Wei / You, Zhanping	Comparative study on the properties of WMA mixture using foamed admixture and free water system	45-50
Louk Fanggi, Butje Alfonsius / Ozbakkaloglu, Togay	Compressive behavior of aramid FRP–HSC–steel double-skin tubular columns	554-565
Barbosa, Rui / Lapa, Nuno / Dias, Diogo / Mendes, Benilde	Concretes containing biomass ashes: Mechanical, chemical, and ecotoxic performances	457-463
Kawasaki, Yuma / Wakuda, Tomoyo / Kobarai, Tomoe / Ohtsu, Masayasu	Corrosion mechanisms in reinforced concrete by acoustic emission	1240-1247
Dang, Yudong / Qian, Jueshi / Qu, Yanzhao / Zhang, Lin / Wang, Zhi / Qiao, Dun / Jia, Xingwen	Curing cement concrete by using shrinkage reducing admixture and curing compound	992-997
Wang, Wei-lun / Kou, Shi-Cong / Xing, Feng	Deformation properties and direct shear of medium strength concrete prepared with 100% recycled coarse aggregates	187-193
Bruggi, Matteo / Taliercio, Alberto	Design of masonry blocks with enhanced thermomechanical performances by topology optimization	424-433
Korkanç, Mustafa	Deterioration of different stones used in historical buildings within Nigde province, Cappadocia	789-803
Cifuentes, Héctor / Karihaloo, Bhushan L.	Determination of size-independent specific fracture energy of normal- and high-strength self-compacting concrete from wedge splitting tests	548-553
Wang, Chun / Hao, Peiwen / Ruan, Fang / Zhang, Xiyan / Adhikari, Sanjeev	Determination of the production temperature of warm mix asphalt by workability test	1165-1170
Coffey, Sean / Dubois, Eric / Mehta, Yusuf / Nolan, Aaron / Purdy, Caitlin	Determining the impact of degree of blending and quality of reclaimed asphalt pavement on predicted pavement performance using pavement ME design	473-478
Qian, Zhendong / Chen, Chun / Jiang, Chenlong / Smit, Andre de Fortier	Development of a lightweight epoxy asphalt mixture for bridge decks	516-520
Aldahdooh, M. A. A. / Muhamad Bunnori, N. / Johari, M. A. Megat	Development of green ultra-high performance fiber reinforced concrete containing ultrafine palm oil fuel ash	379-389
Yang, Jiakuan / Shi, Yafei / Yang, Xiao / Liang, Mei / Li, Ye / Li, Yalin / Ye, Nan	Durability of autoclaved construction materials of sewage sludge–cement–fly ash–furnace slag	398-405
Hao, Y. / Hao, H.	Dynamic compressive behaviour of spiral steel fibre reinforced concrete in split Hopkinson pressure bar tests	521-532
Huang, Kaijian / Deng, Min / Mo, Liwu / Wang, Yuangang	Early age stability of concrete pavement by using hybrid fiber together with MgO expansion agent in high altitude locality	685-690
Karoglou, M. / Bakolas, A. / Moropoulou, A. / Papapostolou, A.	Effect of coatings on moisture and salt transfer phenomena of plasters	35-44
Presuel-Moreno, F. / Wu, Y.-Y. / Liu, Y.	Effect of curing regime on concrete resistivity and aging factor over time	874-882
Aiad, I. / El-Didamony, H. / Heikal, Mohamed / Al-Masry, S.	Effect of delayed addition time of synthesized SSPF condensate on the durability of sulphate resisting cement pastes incorporating micro-silica	1092-1103
Hainin, Mohd Rosli / Yusoff, Nur Izzi Md. / Mohd Satar, Mohd. Khairul Idham / Brown, E. Ray	The effect of lift thickness on permeability and the time available for compaction of hot mix asphalt pavement under tropical climate condition	315-324
Pérez-Jiménez, Félix / Botella, Ramón / Moon, Ki-Hoon / Marasteanu, Mihai	Effect of load application rate and temperature on the fracture energy of asphalt mixtures. Fénix and semi-circular bending tests	1067-1071
Yan, Ke-zhen / Xu, Hong-bin / Zhang, Heng-Long	Effect of mineral filler on properties of warm asphalt mastic containing Sasobit	622-627
Salemi, Niloofar / Behfarnia, Kiachehr	Effect of nano-particles on durability of fiber-reinforced concrete pavement	934-941
Gao, Kang / Lin, Kae-Long / Wang, DeYing / Hwang, Chao-Lung / Anh Tuan, Bui Le / Shiu, Hau-Shing / Cheng, Ta-Wui	Effect of nano-SiO2 on the alkali-activated characteristics of metakaolin-based geopolymers	441-447
Nguyen, Van-Huong / Leklou, Nordine / Aubert, Jean-Emmanuel / Mounanga, Pierre	The effect of natural pozzolan on delayed ettringite formation of the heat-cured mortars	479-484
Toledano-Prados, Mar / Lorenzo-Pesqueira, Miriam / González-Fonteboa, Belén / Seara-Paz, Sindy	Effect of polycarboxylate superplasticizers on large amounts of fly ash cements	628-635
Torréns-Martín, D. / Fernández-Carrasco, Lucia	Effect of sulfate content on cement mixtures	144-150
Ali, Ayman / Abbas, Ala / Nazzal, Munir / Alhasan, Ahmad / Roy, Arjun / Powers, David	Effect of temperature reduction, foaming water content, and aggregate moisture content on performance of foamed warm mix asphalt	1058-1066
Peyvandi, Amirpasha / Ahmed Sbia, Libya / Soroushian, Parviz / Sobolev, Konstantin	Effect of the cementitious paste density on the performance efficiency of carbon nanofiber in concrete nanocomposite	265-269
Łaźniewska-Piekarczyk, Beata	Effect of viscosity type modifying admixture on porosity, compressive strength and water penetration of high performance self-compacting concrete	1035-1044
Marzouki, A. / Lecomte, A. / Beddey, A. / Diliberto, C. / Ben Ouézdou, M.	The effects of grinding on the properties of Portland-limestone cement	1145-1155
Behfarnia, Kiachehr / Salemi, Niloofar	The effects of nano-silica and nano-alumina on frost resistance of normal concrete	580-584
Zhu, Huajun / Zhang, Zuhua / Deng, Fenggan / Cao, Yalong	The effects of phase changes on the bonding property of geopolymer to hydrated cement	124-130
Kwan, A. K. H. / Fung, W. W. S.	Effects of SP on flowability and cohesiveness of cement-sand mortar	1050-1057
Rashad, Alaa M.	Effects of ZnO2, ZrO2, Cu2O3, CuO, CaCO3, SF, FA, cement and geothermal silica waste nanoparticles on properties of cementitious materials – A short guide for Civil Engineer	1120-1133
Sheen, Yeong-Nain / Zhang, Li-Hao / Le, Duc-Hien	Engineering properties of soil-based controlled low-strength materials as slag partially substitutes to Portland cement	822-829
Shan, Liyan / Tan, Yiqiu / Kim, Y. Richard	Establishment of a universal healing evaluation index for asphalt binder	74-79
Isola, M. / Betti, G. / Marradi, A. / Tebaldi, G.	Evaluation of cement treated mixtures with high percentage of reclaimed asphalt pavement	238-247
Han, Sang-Hun / Park, Woo-Sun / Yang, Eun-ik	Evaluation of concrete durability due to carbonation in harbor concrete structures	1045-1049
Wang, Hao / Wang, Zilong	Evaluation of pavement surface friction subject to various pavement preservation treatments	194-202
Sargın, Şebnem / Saltan, Mehmet / Morova, Nihat / Serin, Sercan / Terzi, Serdal	Evaluation of rice husk ash as filler in hot mix asphalt concrete	390-397
Chung, Sang-Yeop / Han, Tong-Seok / Yun, Tae Sup / Youm, Kwang Soo	Evaluation of the anisotropy of the void distribution and the stiffness of lightweight aggregates using CT imaging	998-1008
Mahmud, Goran H. / Yang, Zhenjun / Hassan, Aram M. T.	Experimental and numerical studies of size effects of Ultra High Performance Steel Fibre Reinforced Concrete (UHPFRC) beams	1027-1034
Maya, L. F. / Zanuy, C. / Albajar, L. / López, C. / Portabella, J.	Experimental assessment of connections for precast concrete frames using ultra high performance fibre reinforced concrete	173-186
Porco, Francesco / Porco, Giacinto / Uva, Giuseppina / Sangirardi, Marialuigia	Experimental characterization of "non-engineered" masonry systems in a highly seismic prone area	406-416
Fan, L. F. / Wong, L. N. Y. / Ma, G. W.	Experimental investigation and modeling of viscoelastic behavior of concrete	814-821
Wang, J. / Heath, A. / Walker, P.	Experimental investigation of brickwork behaviour under shear, compression and flexure	448-456
Lakrafli, H. / Tahiri, S. / Albizane, A. / Bouhria, M. / El Otmani, M. E.	Experimental study of thermal conductivity of leather and carpentry wastes	566-574
Lancaster, I. M. / Khalid, H. A. / Kougioumtzoglou, I. A.	Extended FEM modelling of crack propagation using the semi-circular bending test	270-277
Kim, Tae Woo / Baek, Jongeun / Lee, Hyun Jong / Choi, Ji Young	Fatigue performance evaluation of SBS modified mastic asphalt mixtures	908-916
Schoon, Joris / De Buysser, Klaartje / Van Driessche, Isabel / De Belie, Nele	Feasibility study on the use of cellular concrete as alternative raw material for Portland clinker production	725-733
Chen, Dar Hao / Zhou, Wujun / Kun, Li	Fiber reinforced polymer patching binder for concrete pavement rehabilitation and repair	325-332
Papavasiliou, V. / Loizos, A.	Field performance and fatigue characteristics of recycled pavement materials treated with foamed asphalt	677-684
Liang, Yongsheng / Yu, Jianying / Feng, Zhengang / Ai, Pingsong	Flammability and thermal properties of bitumen with aluminium trihydroxide and expanded vermiculite	1114-1119
Wahab, Noran / Soudki, Khaled A.	Flexural behavior of PVC stay-in-place formed RC walls	830-839
Ferrari, Vladimir José / de Hanai, Joao Bento / de Souza, Rafael Alves	Flexural strengthening of reinforcement concrete beams using high performance fiber reinforcement cement-based composite (HPFRCC) and carbon fiber reinforced polymers (CFRP)	485-498
Łaźniewska-Piekarczyk, Beata	The frost resistance versus air voids parameters of high performance self compacting concrete modified by non-air-entrained admixtures	1209-1220
Kontogeorgos, D. A. / Founti, M. A.	A generalized methodology for the definition of reactive porous materials physical properties: Prediction of gypsum board properties	804-813
Lv, Yukun / Sheng, Guangmin / Huang, Zhenhua	High strain and low cycle fatigue behaviors of rebars produced by QST and V-N microalloying technology	67-73
Salavessa, Eunice / Jalali, Said / Sousa, Luís M. O. / Fernandes, Lisete / Duarte, Ana Maria	Historical plasterwork techniques inspire new formulations	858-867
Shen, Yin-Lan / Schneider, Johannes / Tesfamariam, Solomon / Stiemer, Siegfried F. / Mu, Zai-Gen	Hysteresis behavior of bracket connection in cross-laminated-timber shear walls	980-991
Shao, Yan / Zhou, Min / Wang, Weixing / Hou, Haobo	Identification of chromate binding mechanisms in Friedel's salt	942-947
Chen, Dar Hao / Sun, Renjuan / Yao, Zhanyong	Impacts of aggregate base on roadway pavement performances	1017-1026
Yu, Xin / Wang, Yuhong / Luo, Yilin	Impacts of water content on rheological properties and performance-related behaviors of foamed warm-mix asphalt	203-209
Frigio, F. / Pasquini, E. / Ferrotti, G. / Canestrari, F.	Improved durability of recycled porous asphalt	755-763
Özodabaş, Aylin / Yilmaz, Kemalettin	Improvement of the performance of alkali activated blast furnace slag mortars with very finely ground pumice	26-34
Fasana, Sara / Nelva, Riccardo	Improvementt of the water resistancy in the integration of photovoltaic panels on traditional roofs	1081-1091
Böer, Paul / Holliday, Lisa / Kang, Thomas H.-K.	Independent environmental effects on durability of fiber-reinforced polymer wraps in civil applications: A review	360-370
Hoe Kwan, Wai / Ramli, Mahyuddin	Indicative performance of fiber reinforced polymer (FRP) encased beam in flexure	780-788
Martí-Vargas, J. R. / Garcia-Taengua, E. / Serna, P.	Influence of concrete composition on anchorage bond behavior of prestressing reinforcement	1156-1164
Ismail, Idawati / Bernal, Susan A. / Provis, John L. / San Nicolas, Rackel / Brice, David G. / Kilcullen, Adam R. / Hamdan, Sinin / van Deventer, Jannie S. J.	Influence of fly ash on the water and chloride permeability of alkali-activated slag mortars and concretes	1187-1201
Duan, Ping / Chen, Wei / Ma, Juntao / Shui, Zhonghe	Influence of layered double hydroxides on microstructure and carbonation resistance of sulphoaluminate cement concrete	601-609
Yuan, Huiwen / Shi, Yu / Xu, Zhongzi / Lu, Chunhua / Ni, Yaru / Lan, Xianghui	Influence of nano-ZrO2 on the mechanical and thermal properties of high temperature cementitious thermal energy storage materials	6-10
Lemougna, Patrick N. / Chinje Melo, U. F. / Delplancke, Marie-Paule / Rahier, Hubert	Influence of the activating solution composition on the stability and thermo-mechanical properties of inorganic polymers (geopolymers) from volcanic ash	278-286
de Reese, J. / Lenz, P. / Zilch, K. / Plank, J.	Influence of type of superplasticizer and cement composition on the adhesive bonding between aged and fresh concrete	717-724
Kordatos, E. Z. / Exarchos, D. A. / Stavrakos, C. / Moropoulou, A. / Matikas, T. E.	Infrared thermographic inspection of murals and characterization of degradation in historic monuments	1261-1265
Zoidis, Nikolaos / Tatsis, Efthymios / Vlachopoulos, Christos / Gotzamanis, Anastasios / Clausen, Jesper Stærke / Aggelis, Dimitrios G. / Matikas, Theodore E.	Inspection, evaluation and repair monitoring of cracked concrete floor using NDT methods	1302-1308
Laibao, Liu / Yunsheng, Zhang / Wenhua, Zhang / Zhiyong, Liu / Lihua, Zhang	Investigating the influence of basalt as mineral admixture on hydration and microstructure formation mechanism of cement	434-440
Chen, Shyh-Haur / Wang, Her-Yung / Jhou, Jhou-Wei	Investigating the properties of lightweight concrete containing high contents of recycled green building materials	98-103
Jiang, Y. J. / Fan, L. F.	An investigation of mechanical behavior of cement-stabilized crushed rock material using different compaction methods	508-515
Yang, K. / Basheer, P. A. M. / Magee, B. / Bai, Y.	Investigation of moisture condition and Autoclam sensitivity on air permeability measurements for both normal concrete and high performance concrete	306-314
Ameri, Mahmoud / Kouchaki, Sareh / Roshani, Hossein	Laboratory evaluation of the effect of nano-organosilane anti-stripping additive on the moisture susceptibility of HMA mixtures under freeze–thaw cycles	1009-1016
Yao, Bo / Cheng, Gang / Wang, Xiao / Cheng, Cheng / Liu, Songyu	Linear viscoelastic behaviour of thermosetting epoxy asphalt concrete – Experiments and modeling	540-547
Brenna, A. / Bolzoni, F. / Beretta, S. / Ormellese, M.	Long-term chloride-induced corrosion monitoring of reinforced concrete coated with commercial polymer-modified mortar and polymeric coatings	734-744
Christodoulou, C. / Goodier, C. I. / Austin, S. A. / Webb, J. / Glass, G. K.	Long-term performance of surface impregnation of reinforced concrete structures with silane	708-716
Zhang, Tongsheng / Gao, Peng / Luo, Ruifeng / Guo, Yiqun / Wei, Jiangxiong / Yu, Qijun	Measurement of chemical shrinkage of cement paste: Comparison study of ASTM C 1608 and an improved method	662-669
Huang, Xiaoyan / Ranade, Ravi / Zhang, Qian / Ni, Wen / Li, Victor C.	Mechanical and thermal properties of green lightweight engineered cementitious composites	954-960
Kobayashi, Y.	Mesh-independent ray-trace algorithm for concrete structure	1309-1317
López-Moro, Francisco Javier / Moro, María Candelas / Hernández-Olivares, Francisco / Witoszek-Schultz, Bernabé / Alonso-Fernández, Manuel	Microscopic analysis of the interaction between crumb rubber and bitumen in asphalt mixtures using the dry process	691-699
Akçaözoğlu, Kubilay	Microstructural examination of concrete exposed to elevated temperature by using plane polarized transmitted light method	772-779
Mensching, David J. / McCarthy, Leslie Myers / Mehta, Yusuf / Byrne, Michael	Modeling flexible pavement overlay performance for use with quality-related specifications	1072-1080
Taoukil, Driss / El Bouardi, Abdelmajid / Sick, Friedrich / Mimet, Abdelaziz / Ezbakhe, Hassan / Ajzoul, Taib	Moisture content influence on the thermal conductivity and diffusivity of wood–concrete composite	104-115
Dehnad, M. H. / Khodaii, A. / Nejad, F. Moghadas	Moisture sensitivity of asphalt mixtures under different load frequencies and temperatures	700-707
Aggelis, D. G. / Soulioti, D. V. / Gatselou, E. A. / Barkoula, N.-M. / Matikas, T. E.	Monitoring of the mechanical behavior of concrete with chemically treated steel fibers by acoustic emission	1255-1260
Meshgin, Pania / Xi, Yunping	Multi-scale composite models for the effective thermal conductivity of PCM-concrete	371-378
Lin, Yougui / Karadelis, John N. / Xu, Yi	A new mix design method for steel fibre-reinforced, roller compacted and polymer modified bonded concrete overlays	333-341
Yu, Zhuqing / Ye, Guang	New perspective of service life prediction of fly ash concrete	764-771
Moropoulou, Antonia / Labropoulos, Kyriakos C. / Delegou, Ekaterini T. / Karoglou, Maria / Bakolas, Asterios	Non-destructive techniques as a tool for the protection of built cultural heritage	1222-1239
Akdag, Cihan Taylan / Özden, Gürkan	Nonlinear behavior of reinforced concrete (RC) and steel fiber added RC (WS-SFRC) model piles in medium dense sand	464-472
Navarro-Blasco, Í. / Fernández, J. M. / Duran, A. / Sirera, R. / Alvarez, J. I.	A novel use of calcium aluminate cements for recycling waste foundry sand (WFS)	218-228
Presuel-Moreno, F. / Liu, Y. / Wu, Y.-Y.	Numerical modeling of the effects of rebar presence and/or multilayered concrete resistivity on the apparent resistivity measured via the Wenner method	16-25
Nehdi, Moncef L.	Only tall things cast shadows: Opportunities, challenges and research needs of self-consolidating concrete in super-tall buildings	80-90
Gentile, Carmelo / Saisi, Antonella	Operational modal testing of historic structures at different levels of excitation	1273-1285
Adarkwa, Offei Amanor / Attoh-Okine, Nii	Pavement crack classification based on tensor factorization	853-857
Muhammad, Bala / Ismail, Mohammad	Performance of hydrocarbon particles on the drying shrinkage of cement mortar	868-873
Noorvand, Hossein / Abang Ali, Abang Abdullah / Demirboğa, Ramazan / Noorvand, Hassan / Farzadnia, Nima	Physical and chemical characteristics of unground palm oil fuel ash cement mortars with nanosilica	1104-1113
Xiao, Y. / van de Ven, M. F. C. / Molenaar, A. A. A. / Wu, S. P.	Possibility of using epoxy modified bitumen to replace tar-containing binder for pavement antiskid surfaces	59-66
Ganesan, N. / Indira, P. V. / Santhakumar, Anjana	Prediction of ultimate strength of reinforced geopolymer concrete wall panels in one-way action	91-97
Fiore, Alessandra / Marano, Giuseppe Carlo / Monaco, Pietro / Morbi, Alessandro	Preliminary experimental study on the effects of surface-applied photocatalytic products on the durability of reinforced concrete	137-143
Vasconcelos, G. / Lourenço, P. B. / Mendonça, P. / Camões, A. / Mateus, R. / Bragança, L. / Brito, A. G. / Poletti, E.	Proposal of an innovative solution for partition walls: Mechanical, thermal and acoustic validation	961-979
Ohtsu, Masayasu / Yamada, Masahiko / Sonoda, Takahiro	Quantitative evaluation of SIBIE procedure and case studies	1248-1254
Ahmed, Aly	Recycled bassanite for enhancing the stability of poor subgrades clay soil in road construction projects	151-159
Luo, Xin / Xu, Jin-yu / Bai, Er-lei / Li, Weimin	Research on the dynamic compressive test of highly fluidized geopolymer concrete	166-172
Brovelli, Claudio / Hilliou, Loic / Hemar, Yacine / Pais, Jorge / Pereira, Paulo / Crispino, Maurizio	Rheological characteristics of EVA modified bitumen and their correlations with bitumen concrete properties	1202-1208
Cristelo, Nuno / Soares, Edgar / Rosa, Ivo / Miranda, Tiago / Oliveira, Daniel V. / Silva, Rui A. / Chaves, Ana	Rheological properties of alkaline activated fly ash used in jet grouting applications	925-933
Wei, Jianming / Liu, Zhangyong / Zhang, Yuzhen	Rheological properties of amorphous poly alpha olefin (APAO) modified asphalt binders	533-539
Dong, Qiao / Huang, Baoshan / Shu, Xiang	Rubber modified concrete improved by chemically active coating and silane coupling agent	116-123
Ma, Hui / Xue, Jianyang / Zhang, Xicheng / Luo, Daming	Seismic performance of steel-reinforced recycled concrete columns under low cyclic loads	229-237
Zanzi, Luigi / Arosio, Diego	Sensitivity and accuracy in rebar diameter measurements from dual-polarized GPR data	1293-1301
Liu, Ruifen / Pantelides, Chris P.	Shear strength of GFRP reinforced precast lightweight concrete panels	51-58
Diederich, Paco / Mouret, Michel / Ponchon, François	Simple tools for achieving self-compacting ability of concrete according to the nature of the limestone filler	840-852
Dhandhukia, Pinakin / Goswami, Dweipayan / Thakor, Parth / Thakker, Janki N.	Soil property apotheosis to corral the finest compressive strength of unbaked adobe bricks	948-953
Thomas, Blessen Skariah / Damare, Alok / Gupta, R. C.	Strength and durability characteristics of copper tailing concrete	894-900
Sevim, Umur Korkut / Tümen, Yakup	Strength and fresh properties of borogypsum concrete	342-347
Anil, Özgür / Kaya, Nalan / Arslan, Onur	Strengthening of one way RC slab with opening using CFRP strips	883-893
Senga, Y. / Dony, A. / Colin, J. / Hamlat, S. / Berthaud, Y.	Study of the skid resistance of blends of coarse aggregates with different polish resistances	901-907
Liu, Jiaping / Li, Changfeng / Liu, Jianzhong / Cui, Gong / Yang, Zhiqian	Study on 3D spatial distribution of steel fibers in fiber reinforced cementitious composites through micro-CT technique	656-661
Shiotani, Tomoki / Oshima, Yoshinobu / Goto, Motoyoshi / Momoki, Shohei	Temporal and spatial evaluation of grout failure process with PC cable breakage by means of acoustic emission	1286-1292
Abdullah, A. / Bailey, C. G. / Wu, Z. J.	Tests investigating the punching shear of a column-slab connection strengthened with non-prestressed or prestressed FRP plates	1134-1144
Maraveas, C. / Wang, Y. C. / Swailes, T.	Thermal and mechanical properties of 19th century fireproof flooring systems at elevated temperatures	248-264
Benfratello, S. / Capitano, C. / Peri, G. / Rizzo, G. / Scaccianoce, G. / Sorrentino, G.	Thermal and structural properties of a hemp–lime biocomposite	745-754
Lee, Joon Kyu / Shang, Julie Q.	Thermal properties of mine tailings and tire crumbs mixtures	636-646
El Fgaier, Fayçal / Lafhaj, Zoubeir / Chapiseau, Christophe	Use of clay bricks incorporating treated river sediments in a demonstrative building: Case study	160-165
Zaetang, Yuwadee / Wongsa, Ampol / Sata, Vanchai / Chindaprasirt, Prinya	Use of lightweight aggregates in pervious concrete	585-591
Halicka, Anna / Ogrodnik, Pawel / Zegardlo, Bartosz	Using ceramic sanitary ware waste as concrete aggregate	295-305
Martin, William D. / Putman, Bradley J. / Kaye, Nigel B.	Using image analysis to measure the porosity distribution of a porous pavement	210-217
Burgos-Montes, O. / Alonso, M. M. / Puertas, F.	Viscosity and water demand of limestone- and fly ash-blended cement pastes in the presence of superplasticisers	417-423

Über diese
Datenseite
IssueID
22514
Veröffentlicht am:
13.12.2018
Geändert am:
30.06.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - November 2013

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - November 2013

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.