Construction and Building Materials - Januar 2013

Erschienen:	Januar 2013

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Boyd, Andrew J. / De La Haza, Aldo	25th Anniversary session for ACI 228 NDT of concrete – Building on the past for the future of NDT of concrete	1239
Bennegadi, M. L. / Sereir, Z. / Amziane, S.	3D nonlinear finite element model for the volume optimization of a RC beam externally reinforced with a HFRP plate	1152-1160
da Porto, F. / Munari, M. / Prota, A. / Modena, C.	Analysis and repair of clustered buildings: Case study of a block in the historic city centre of L'Aquila (Central Italy)	1221-1237
Madurwar, Mangesh V. / Ralegaonkar, Rahul V. / Mandavgane, Sachin A.	Application of agro-waste for sustainable construction materials: A review	872-878
Toutanji, H. A. / Choi, H. / Wong, D. / Gilbert, J. A. / Alldredge, D. J.	Applying a polyurea coating to high-performance organic cementitious materials	1170-1179
Bal, Lyes / Buyle-Bodin, François	Artificial neural network for predicting drying shrinkage of concrete	248-254
De La Haza, Aldo O. / Samokrutov, Andrey A. / Samokrutov, Pavel A.	Assessment of concrete structures using the Mira and Eyecon ultrasonic shear wave devices and the SAFT-C image reconstruction technique	1276-1291
Crispino, M. / Mariani, E. / Toraldo, E.	Assessment of fiber-reinforced bituminous mixtures' compaction temperatures through mastics viscosity tests	1031-1039
Martínez-Sala, R. / Rodríguez-Abad, I. / Diez Barra, R. / Capuz-Lladró, R.	Assessment of the dielectric anisotropy in timber using the nondestructive GPR technique	903-911
Ranaivomanana, Narintsoa / Multon, Stéphane / Turatsinze, Anaclet	Basic creep of concrete under compression, tension and bending	173-180
Heikal, Mohamed / El-Didamony, H. / Sokkary, T. M. / Ahmed, I. A.	Behavior of composite cement pastes containing microsilica and fly ash at elevated temperature	1180-1190
Aveldaño, Raquel R. / Ortega, Néstor F.	Behavior of concrete elements subjected to corrosion in their compressed or tensed reinforcement	822-828
Yan, Zhi-guo / Zhu, He-hua / Ju, J. Woody	Behavior of reinforced concrete and steel fiber reinforced concrete shield TBM tunnel linings exposed to high temperatures	610-618
Rethnasamy, Chithra / Rajagopal, Thenmozhi / Muthuraj, Hareesh	Bending behavior, deformability and strength analysis of Prefabricated Cage Reinforced Composite beams	482-490
Khan, M. S. / Prasad, J. / Abbas, H.	Bond strength of RC beams subjected to cyclic thermal loading	644-657
Dong, Wei / Wu, Zhimin / Zhou, Xiangming	Calculating crack extension resistance of concrete based on a new crack propagation criterion	879-889
Najafgholipour, M. A. / Maheri, Mahmoud R. / Lourenço, P. B.	Capacity interaction in brick masonry under simultaneous in-plane and out-of-plane loads	619-626
El-Didamony, H. / Heikal, Mohamed / Khalil, Kh. A.	Characteristics of cement pastes containing sulphoaluminate and belite prepared from nano-materials	14-21
Shih, Ping-Yu / Lee, Po-Hua / Nian, Kai-Jie / Lee, Tzen-Chin	Characterization of a mortar made with cement and slag vitrified from a MSWI ash-mix and CMP sludge	22-30
Apostolopoulos, Charis A. / Demis, Sotiris / Papadakis, Vagelis G.	Chloride-induced corrosion of steel reinforcement – Mechanical performance and pit depth analysis	139-146
Robert, Mathieu / Benmokrane, Brahim	Combined effects of saline solution and moist concrete on long-term durability of GFRP reinforcing bars	274-284
Lim, Malcolm K. / Cao, Honggang	Combining multiple NDT methods to improve testing effectiveness	1310-1315
Gulotta, Davide / Goidanich, Sara / Tedeschi, Cristina / Nijland, Timo G. / Toniolo, Lucia	Commercial NHL-containing mortars for the preservation of historical architecture. Part 1: Compositional and mechanical characterisation	31-42
Shariati, Mahdi / Ramli Sulong, N. H. / Suhatril, Meldi / Shariati, Ali / Arabnejad Khanouki, M. M. / Sinaei, Hamid	Comparison of behaviour between channel and angle shear connectors under monotonic and fully reversed cyclic loading	582-593
Pelà, Luca / Aprile, Alessandra / Benedetti, Andrea	Comparison of seismic assessment procedures for masonry arch bridges	381-394
Li, Ying / Yu, Hongfa / Zheng, Lina / Wen, Jing / Wu, Chengyou / Tan, Yongshan	Compressive strength of fly ash magnesium oxychloride cement containing granite wastes	1-7
Garbacz, Andrzej / Sokołowska, Joanna J.	Concrete-like polymer composites with fly ashes – Comparative study	689-699
Tarussov, Alexander / Vandry, Marc / De La Haza, Aldo	Condition assessment of concrete structures using a new analysis method: Ground-penetrating radar computer-assisted visual interpretation	1246-1254
Prieto, M. I. / Cobo, A. / Rodríguez, A. / Calderón, V.	Corrosion behavior of reinforcement bars embedded in mortar specimens containing ladle furnace slag in partial substitution of aggregate and cement	188-194
Wang, Jinyan / Tomor, Adrienn K. / Melbourne, Clive / Yousif, Saad	Critical review of research on high-cycle fatigue behaviour of brick masonry	602-609
Rouchier, Simon / Foray, Geneviève / Godin, Nathalie / Woloszyn, Monika / Roux, Jean-Jacques	Damage monitoring in fibre reinforced mortar by combined digital image correlation and acoustic emission	371-380
Kamseu, Elie / Bignozzi, Maria Chiara / Melo, U. C. / Leonelli, Cristina / Sglavo, Vincenzo M.	Design of inorganic polymer cements: Effects of matrix strengthening on microstructure	1135-1145
Wang, Xiao-gang / Zhang, Wei-Ping / Gu, Xiang-Lin / Dai, Hong-chao	Determination of residual cross-sectional areas of corroded bars in reinforced concrete structures using easy-to-measure variables	846-853
Doyle, Thomas A. / McNally, Ciaran / Gibney, Amanda / Tabaković, Amir	Developing maturity methods for the assessment of cold-mix bituminous materials	524-529
Kumar, Anuj / Kumar, Sanjay	Development of paving blocks from synergistic use of red mud and fly ash using geopolymerization	865-871
Carneiro, J. O. / Azevedo, S. / Teixeira, V. / Fernandes, F. / Freitas, E. / Silva, H. / Oliveira, J.	Development of photocatalytic asphalt mixtures by the deposition and volumetric incorporation of TiO 2 nanoparticles	594-601
Shon, Chang-Seon / Jung, Youn su / Saylak, Don / Mishra, Surendra K.	Development of synthetic aggregate using off-ASTM specification ashes	700-707
Huang, Hai / Chrismer, Steven	Discrete element modeling of ballast settlement under trains moving at "Critical Speeds"	994-1000
Frías, M. / García, R. / de la Villa, R. Vigil / Villar, E.	The effect of binary pozzolan mix on the mineralogical changes in the ternary activated paper sludge–fly ash–Ca(OH) 2 system	48-53
Erdoğan, Sinan T.	Effect of clinker phase distribution within cement particles on properties of a hydrating cement paste	941-949
Sharaky, I. A. / Torres, L. / Baena, M. / Vilanova, I.	Effect of different material and construction details on the bond behaviour of NSM FRP bars in concrete	890-902
Lim, Siong Kang / Tan, Cher Siang / Chen, Kah Pin / Lee, Min Lee / Lee, Wah Peng	Effect of different sand grading on strength properties of cement grout	348-355
Kaewmanee, Krittiya / Krammart, Pitisan / Sumranwanich, Taweechai / Choktaweekarn, Pongsak / Tangtermsirikul, Somnuk	Effect of free lime content on properties of cement–fly ash mixtures	829-836
Papanikolaou, Vassilis K. / Stefanidou, Sotiria P. / Kappos, Andreas J.	The effect of preloading on the strength of jacketed R / C columns	54-63
Janowska-Renkas, Elżbieta	The effect of superplasticizers' chemical structure on their efficiency in cement pastes	1204-1210
Wang, Guiming / Kong, Yun / Sun, Tao / Shui, Zhonghe	Effect of water–binder ratio and fly ash on the homogeneity of concrete	1129-1134
Zubaidi, Radhi Al / Barakat, Samer / Altoubat, Salah	Effects of adding brass byproduct on the basic properties of concrete	236-241
Li, Fumin / Yuan, Yingshu	Effects of corrosion on bond behavior between steel strand and concrete	413-422
Behfarnia, Kiachehr / Farshadfar, Omid	The effects of pozzolanic binders and polypropylene fibers on durability of SCC to magnesium sulfate attack	64-71
Lee, Gerry / Poon, Chi Sun / Wong, Yuk Lung / Ling, Tung Chai	Effects of recycled fine glass aggregates on the properties of dry–mixed concrete blocks	638-643
Chiou, I. J. / Chen, C. H.	Effects of waste-glass fineness on sintering of reservoir-sediment aggregates	987-993
Gnip, I. / Vaitkus, S. / Vėjelis, S.	An estimated prediction of the deformability of mineral wool (MW) slabs under long-term compressive stress	675-680
Ferraro, Christopher C. / Boyd, Andrew J. / Consolazio, Gary R.	Evaluation of damage to bridge piers using pulse velocity tomography	1303-1309
Nadeem, Abid / Memon, Shazim Ali / Lo, Tommy Yiu	Evaluation of fly ash and Metakaolin concrete at elevated temperatures through stiffness damage test	1058-1065
Shon, Chang-Seon / Jung, Youn su / Saylak, Don	Evaluation of synthetic aggregates using off-ASTM specification ashes as road base course materials	508-514
Tovar-Rodríguez, Gustavo / Barra, Marilda / Pialarissi, Sergio / Aponte, Diego / Vázquez, Enric	Expansion of mortars with gypsum contaminated fine recycled aggregates	1211-1220
Grilli, A. / Bocci, M. / Tarantino, A. M.	Experimental investigation on fibre-reinforced cement-treated materials using reclaimed asphalt	491-496
Xie, Jian-he / Hu, Ruo-lin	Experimental study on rehabilitation of corrosion-damaged reinforced concrete beams with carbon fiber reinforced polymer	708-716
Wang, H. T. / Wang, L. C.	Experimental study on static and dynamic mechanical properties of steel fiber reinforced lightweight aggregate concrete	1146-1151
Mostofinejad, Davood / Shameli, Seyed Masoud	Externally bonded reinforcement in grooves (EBRIG) technique to postpone debonding of FRP sheets in strengthened concrete beams	751-758
Xiao, Jianzhuang / Li, Hong / Yang, Zhenjun	Fatigue behavior of recycled aggregate concrete under compression and bending cyclic loadings	681-688
Iucolano, F. / Liguori, B. / Colella, C.	Fibre-reinforced lime-based mortars: A possible resource for ancient masonry restoration	785-789
Valipour, Hamid / FarhangVesali, Nima / Foster, Stephen	A generic model for investigation of arching action in reinforced concrete members	742-750
Kus, Hülya / Ozkan, Ertan / Göcer, Özgür / Edis, Ecem	Hot box measurements of pumice aggregate concrete hollow block walls	837-845
Vu, Dinh-Hieu / Wang, Kuen-Sheng / Bac, Bui Hoang / Nam, Bui Xuan	Humidity control materials prepared from diatomite and volcanic ash	1066-1072
Mohamed, Abd El Megeed Kabasy	Improvement of swelling clay properties using hay fibers	242-247
Chakraborty, Sumit / Kundu, Sarada Prasad / Roy, Aparna / Basak, Ratan Kumar / Adhikari, Basudam / Majumder, S. B.	Improvement of the mechanical properties of jute fibre reinforced cement mortar: A statistical approach	776-784
Yeon, Jung Heum / Choi, Seongcheol / Won, Moon C.	In situ measurement of coefficient of thermal expansion in hardening concrete and its effect on thermal stress development	306-315
Dessouky, Samer / Contreras, David / Sanchez, Jeremy / Papagiannakis, A. T. / Abbas, Ala	Influence of hindered phenol additives on the rheology of aged polymer-modified bitumen	214-223
Nath, S. K. / Kumar, Sanjay	Influence of iron making slags on strength and microstructure of fly ash geopolymer	924-930
Cappellari, Marco / Daubresse, Anne / Chaouche, Mohend	Influence of organic thickening admixtures on the rheological properties of mortars: Relationship with water-retention	950-961
Ortega, J. M. / Albaladejo, A. / Pastor, J. L. / Sánchez, I. / Climent, M. A.	Influence of using slag cement on the microstructure and durability related properties of cement grouts for micropiles	84-93
Chen, Xudong / Wu, Shenxin	Influence of water-to-cement ratio and curing period on pore structure of cement mortar	804-812
Zhong, Shiyun / Li, Jinmei / Ni, Kun / Han, Dongdong	Influences of HPMC on adsorption of styrene-acrylic ester latex particles on cement grains	567-574
Sonebi, M. / Bassuoni, M. T.	Investigating the effect of mixture design parameters on pervious concrete by statistical modelling	147-154
Ahmedzade, Perviz	The investigation and comparison effects of SBS and SBS with new reactive terpolymer on the rheological properties of bitumen	285-291
Ogundipe, Olumide Moses / Thom, Nick / Collop, Andrew	Investigation of crack resistance potential of stress absorbing membrane interlayers (SAMIs) under traffic loading	658-666
Altun, Fatih / Aktaş, Bekir	Investigation of reinforced concrete beams behavior of steel fiber added lightweight concrete	575-581
Ibrahim, Ahmed / Mahmoud, Enad / Ali, Tarig	Investigation of relationships between high strength self consolidating concrete compressive strength and macroscopic internal structure	1161-1169
Ozguven, A. / Ozcelik, Y.	Investigation of some property changes of natural building stones exposed to fire and high heat	813-821
Zhang, Qi / Ye, Guang / Koenders, Eduard	Investigation of the structure of heated Portland cement paste by using various techniques	1040-1050
Shen, Weiguo / Shan, Lai / Zhang, Tao / Ma, Hongkun / Cai, Zhi / Shi, Hua	Investigation on polymer–rubber aggregate modified porous concrete	667-674
Varela-Ortiz, Wilmel / Lugo Cintrón, Carmen Y. / Velázquez, Gerardo I. / Stanton, Terry R.	Load testing and GPR assessment for concrete bridges on military installations	1255-1269
Živica, V. / Palou, M. T. / Bagel, L. / Krizma, M.	Low-porosity tricalcium aluminate hardened paste	1191-1198
Gouny, F. / Fouchal, F. / Pop, O. / Maillard, P. / Rossignol, S.	Mechanical behavior of an assembly of wood–geopolymer–earth bricks	110-118
Nadeem, Abid / Memon, Shazim Ali / Lo, Tommy Yiu	Mechanical performance, durability, qualitative and quantitative analysis of microstructure of fly ash and Metakaolin mortar at elevated temperatures	338-347
Mardani-Aghabaglou, Ali / Ramyar, Kambiz	Mechanical properties of high-volume fly ash roller compacted concrete designed by maximum density method	356-364
Heikal, Mohamed / Zohdy, K. M. / Abdelkreem, M.	Mechanical, microstructure and rheological characteristics of high performance self-compacting cement pastes and concrete containing ground clay bricks	101-109
Sharma, Bhavna / Harries, Kent A. / Ghavami, Khosrow	Methods of determining transverse mechanical properties of full-culm bamboo	627-637
Kaur, Gurdeep / Siddique, Rafat / Rajor, Anita	Micro-structural and metal leachate analysis of concrete made with fungal treated waste foundry sand	94-100
Kim, H. K. / Park, S. J. / Han, J. I. / Lee, H. K.	Microbially mediated calcium carbonate precipitation on normal and lightweight concrete	1073-1082
Yu, Huanan / Shen, Shihui	A micromechanical based three-dimensional DEM approach to characterize the complex modulus of asphalt mixtures	1089-1096
Camilleri, J. / Anastasi, M. / Torpiano, A.	The microstructure and physical properties of heavy oil fuel ash replaced Portland cement for use in flowable fill concrete and the production of concrete masonry units	970-979
Liu, Lin / Chen, Huisu / Sun, Wei / Ye, Guang	Microstructure-based modeling of the diffusivity of cement paste with micro-cracks	1107-1116
Choi, Se Jin / Kim, Soo-Hwan / Lee, Su-Jin / Won, Jong-Pil	Mix proportion of eco-friendly fireproof high-strength concrete	181-187
Yusoff, Nur Izzi Md. / Mounier, Damien / Marc-Stéphane, Ginoux / Rosli Hainin, Mohd. / Airey, Gordon D. / Di Benedetto, Hervé	Modelling the rheological properties of bituminous binders using the 2S2P1D Model	395-406
Rahim, Abdul / Sharma, U. K. / Murugesan, K. / Sharma, A. / Arora, P.	Multi-response optimization of post-fire residual compressive strength of high performance concrete	265-273
Feng, Xinjun / Ye, Song / Hao, Peiwen	A new laboratory method to characterize gradation segregation of large stone asphalt mixtures	1199-1203
Martínez-Martínez, Javier / Benavente, David / Gómez-Heras, Miguel / Marco-Castaño, Luz / García-del-Cura, M. Ángeles	Non-linear decay of building stones during freeze–thaw weathering processes	443-454
Silva, Cristina Matos / Flores-Colen, Inês / Gaspar, Sara	Numerical analysis of renders' adhesion using an interface model	292-305
Zaidi, Ali / Masmoudi, Radhouane / Bouhicha, Mohamed	Numerical analysis of thermal stress-deformation in concrete surrounding FRP bars in hot region	204-213
Sonebi, M. / Lachemi, M. / Hossain, K. M. A.	Optimisation of rheological parameters and mechanical properties of superplasticised cement grouts containing metakaolin and viscosity modifying admixture	126-138
Katzer, Jacek / Domski, Jacek	Optimization of fibre reinforcement for waste aggregate cement composite	790-795
Xie, Jun / Chen, Juyong / Wu, Shaopeng / Lin, Juntao / Wei, Wei	Performance characteristics of asphalt mixture with basic oxygen furnace slag	796-803
Saibabu, S. / Srinivas, V. / Sasmal, Saptarshi / Lakshmanan, N. / Iyer, Nagesh R.	Performance evaluation of dry and epoxy jointed segmental prestressed box girders under monotonic and cyclic loading	931-940
Jamshidi, Ali / Hamzah, Meor Othman / You, Zhanping	Performance of Warm Mix Asphalt containing Sasobit®: State-of-the-art	530-553
Ahmad Bany Yaseen, Ibrahim / Al-Amoush, Hani / Al-Farajat, Mohammad / Mayyas, Abdulraouf	Petrography and mineralogy of Roman mortars from buildings of the ancient city of Jerash, Jordan	465-471
Kong, Xiang-ming / Wu, Chun-Chao / Zhang, Yan-rong / Li, Jiao-Li	Polymer-modified mortar with a gradient polymer distribution: Preparation, permeability, and mechanical behaviour	195-203
Gao, Yun / De Schutter, Geert / Ye, Guang / Huang, Haoliang / Tan, Zhijun / Wu, Kai	Porosity characterization of ITZ in cementitious composites: Concentric expansion and overflow criterion	1051-1057
Dantas, Adriana Trocoli Abdon / Leite, Monica Batista / Nagahama, Koji de Jesus	Prediction of compressive strength of concrete containing construction and demolition waste using artificial neural networks	717-722
Chen, Yongliang / Zhang, Yimin / Chen, Tiejun / Liu, Tao / Huang, Jing	Preparation and characterization of red porcelain tiles with hematite tailings	1083-1088
Jasso, Martin / Bakos, Dusan / MacLeod, Daryl / Zanzotto, Ludo	Preparation and properties of conventional asphalt modified by physical mixtures of linear SBS and montmorillonite clay	759-765
Uva, Giuseppina / Porco, Francesco / Fiore, Andrea / Mezzina, Mauro	Proposal of a methodology for assessing the reliability of in situ concrete tests and improving the estimate of the compressive strength	72-83
Yeboah, David / Taylor, Su / McPolin, Danny / Gilfillan, Raymond	Pull-out behaviour of axially loaded Basalt Fibre Reinforced Polymer (BFRP) rods bonded perpendicular to the grain of glulam elements	962-969
Nadeem, Abid / Memon, Shazim Ali / Lo, Tommy Yiu	Qualitative and quantitative analysis and identification of flaws in the microstructure of fly ash and metakaolin blended high performance concrete after exposure to elevated temperatures	731-741
Brown, Jeff R. / Hamilton, H. R.	Quantitative infrared thermography inspection for FRP applied to concrete using single pixel analysis	1292-1302
Pan, Zuanfeng / Li, Bing / Lu, Zhitao	Re-evaluation of CEB-FIP 90 prediction models for creep and shrinkage with experimental database	1022-1030
De Schepper, Mieke / De Buysser, Klaartje / Van Driessche, Isabel / De Belie, Nele	The regeneration of cement out of Completely Recyclable Concrete: Clinker production evaluation	1001-1009
Mehrara, Amir / Khodaii, Ali	A review of state of the art on stripping phenomenon in asphalt concrete	423-442
Šušteršič, E. / Tušar, M. / Zupančič Valant, A.	Rheological and mechanical characterization of waste PMMA/ATH modified bitumen	119-125
Gutiérrez-González, S. / Alonso, M. M. / Gadea, J. / Rodríguez, A. / Calderón, V.	Rheological behaviour of gypsum plaster pastes with polyamide powder wastes	407-412
Yao, Hui / You, Zhanping / Li, Liang / Goh, Shu Wei / Lee, Chee Huei / Yap, Yoke Khin / Shi, Xianming	Rheological properties and chemical analysis of nanoclay and carbon microfiber modified asphalt with Fourier transform infrared spectroscopy	327-337
Drdácký, Miloš / Fratini, Fabio / Frankeová, Dita / Slížková, Zuzana	The Roman mortars used in the construction of the Ponte di Augusto (Narni, Italy) – A comprehensive assessment	1117-1128
Azeredo, Givanildo / Diniz, Marcelo	Self-compacting concrete obtained by the use of kaolin wastes	515-523
Çalışkan, Özlem / Yılmaz, Salih / Kaplan, Hasan / Kirac, Nevzat	Shear strength of epoxy anchors embedded into low strength concrete	723-730
Chang, Li / Kaijian, Niu	Simulation of asphalt concrete cracking using Cohesive Zone Model	1097-1106
Sim, Jae-Il / Yang, Keun-Hyeok / Kim, Heung-Yeoul / Choi, Byong-Jeong	Size and shape effects on compressive strength of lightweight concrete	854-864
Santos, Pedro M. D. / Júlio, Eduardo N. B. S.	A state-of-the-art review on roughness quantification methods for concrete surfaces	912-923
Esmaeeli, Esmaeel / Manning, Elizabeth / Barros, Joaquim A. O.	Strain hardening fibre reinforced cement composites for the flexural strengthening of masonry elements of ancient structures	1010-1021
Ramli, Mahyuddin / Hoe Kwan, Wai / Abas, Noor Faisal	Strength and durability of coconut-fiber-reinforced concrete in aggressive environments	554-566
Hertlein, Bernard H.	Stress wave testing of concrete: A 25-year review and a peek into the future	1240-1245
Jin, Nan Ji / Hwang, Hae Geun / Yeon, Jung Heum	Structural analysis and optimum design of GRP pipes based on properties of materials	316-326
Du, Yingang / Cullen, Martin / Li, Cankang	Structural performance of RC beams under simultaneous loading and reinforcement corrosion	472-481
Heidari, Ali / Tavakoli, Davoud	A study of the mechanical properties of ground ceramic powder concrete incorporating nano-SiO 2 particles	255-264
Praticò, F. G. / Vaiana, R.	A study on volumetric versus surface properties of wearing courses	766-775
Pacheco-Torgal, F. / Miraldo, S. / Ding, Y. / Labrincha, J. A.	Targeting HPC with the help of nanoparticles: An overview	365-370
Briga-Sá, Ana / Nascimento, David / Teixeira, Nuno / Pinto, Jorge / Caldeira, Fernando / Varum, Humberto / Paiva, Anabela	Textile waste as an alternative thermal insulation building material solution	155-160
Jiao, Xiangke / Zhang, Yimin / Chen, Tiejun	Thermal stability of a silica-rich vanadium tailing based geopolymer	43-47
Petcherdchoo, Aruz	Time dependent models of apparent diffusion coefficient and surface chloride for chloride transport in fly ash concrete	497-507
Carino, N. J.	Training: Often the missing link in using NDT methods	1316-1329
Nocuń-Wczelik, Wiesława / Czapik, Przemysław	Use of calorimetry and other methods in the studies of water reducers and set retarders interaction with hydrating cement paste	980-986
Kamei, Takeshi / Ahmed, Aly / Shibi, Toshihide	The use of recycled bassanite and coal ash to enhance the strength of very soft clay in dry and wet environmental conditions	224-235
Sua-iam, Gritsada / Makul, Natt	Utilization of limestone powder to improve the properties of self-compacting concrete incorporating high volumes of untreated rice husk ash as fine aggregate	455-464
Alengaram, U. Johnson / Muhit, Baig Abdullah Al / Jumaat, Mohd Zamin Bin	Utilization of oil palm kernel shell as lightweight aggregate in concrete – A review	161-172
Yang, Lin / Yan, Yun / Hu, Zhihua / Xie, Xiaoli	Utilization of phosphate fertilizer industry waste for belite–ferroaluminate cement production	8-13
Dodge, Ethan C. / Lewis, Aaron R.	Waterproofing and elevation profiling of a sub-surface drainage layer	1270-1275

Über diese
Datenseite
IssueID
22504
Veröffentlicht am:
13.12.2018
Geändert am:
30.06.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - Januar 2013

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - Januar 2013

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.