Construction and Building Materials - April 2012

Erschienen:	April 2012

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Park, Sang-Soon / Kwon, Seung-Jun / Jung, Sang Hwa	Analysis technique for chloride penetration in cracked concrete using equivalent diffusion and permeation	183-192
Ma, Ying / Che, Yi / Gong, Jinxin	Behavior of corrosion damaged circular reinforced concrete columns under cyclic loading	548-556
Sobuz, Habibur Rahman / Ahmed, Ehsan / Sutan, Norsuzailina Mohamed / Hasan, Noor Md. Sadiqul / Uddin, Md. Alhaz / Jahir Uddin, Md.	Bending and time-dependent responses of RC beams strengthened with bonded carbon fiber composite laminates	597-611
Maier, Patrick L. / Durham, Stephan A.	Beneficial use of recycled materials in concrete mixtures	428-437
Chiaia, Bernardino / Fantilli, Alessandro P. / Ventura, Giulio	A chemo-mechanical model of lime hydration in concrete structures	308-315
Gutiérrez, Javier / Mas, Ángeles / Gil, Enrique / Galvañ, Vicente	Clay-related damage in rainscreen walls built with natural stone coverings	357-367
Yuan, Yingshu / Jiang, Jianhua	Climate load model – Climate action spectrum for predicting durability of concrete structure	291-298
Gencel, Osman / Köksal, Fuat / Ozel, Cengiz / Brostow, Witold	Combined effects of fly ash and waste ferrochromium on properties of concrete	633-640
Al-Dulaijan, S. U. / Maslehuddin, M. / Shameem, M. / Ibrahim, M. / Al-Mehthel, M.	Corrosion protection provided by chemical inhibitors to damaged FBEC bars	487-495
Verstrynge, E. / Schueremans, L. / van Gemert, D.	Creep and failure prediction of Diestian ferruginous sandstone: Modelling and repair options	149-157
Wang, Liheng / Zhou, Xiyuan / Liu, He / Yan, Weiming	Damage detection of RC beams based on experiment and analysis of nonlinear dynamic characteristics	420-427
Kovler, Konstantin	Does the utilization of coal fly ash in concrete construction present a radiation hazard?	158-166
Faure, Paméla F. / Caré, Sabine / Magat, Julie / Chaussadent, Thierry	Drying effect on cement paste porosity at early age observed by NMR methods	496-503
Beushausen, Hans / Alexander, Mark / Ballim, Yunus	Early-age properties, strength development and heat of hydration of concrete containing various South African slags at different replacement ratios	533-540
Pacheco-Torgal, F. / Jalali, Said	Earth construction: Lessons from the past for future eco-efficient construction	512-519
Cristelo, Nuno / Glendinning, Stephanie / Fernandes, Lisete / Pinto, Amândio Teixeira	Effect of calcium content on soil stabilisation with alkaline activation	167-174
Meng, Tao / Yu, Yachao / Qian, Xiaoqian / Zhan, Shulin / Qian, Kuangliang	Effect of nano-TiO2 on the mechanical properties of cement mortar	241-245
Huang, N. M. / Chang, J. J. / Liang, M. T.	Effect of plastering on the carbonation of a 35-year-old reinforced concrete building	206-214
Siddique, Rafat / Kapoor, Kushal / Kadri, El-Hadj / Bennacer, Rachid	Effect of polyester fibres on the compressive strength and abrasion resistance of HVFA concrete	270-278
Yang, Keun-Hyeok / Cho, Ah-Ram / Song, Jin-Kyu	Effect of water–binder ratio on the mechanical properties of calcium hydroxide-based alkali-activated slag concrete	504-511
Ba, Ming-fang / Qian, Chun-xiang / Zhuang, Yuang	Effects and mechanism of atmospheric multi-acidic gases on cement-based concrete linings of vehicle tunnels	438-443
Hamzah, Meor Othman / Mohd Hasan, Mohd Rosli / van de Ven, Martin / Yahaya, Ahmad Shukri	The effects of initial conditioning and ambient temperatures on abrasion loss and temperature change of porous asphalt	108-113
Sena-Cruz, José M. / Barros, Joaquim A. O. / Coelho, Mário R. F. / Silva, Luís F. F. T.	Efficiency of different techniques in flexural strengthening of RC beams under monotonic and fatigue loading	175-182
Zhu, Xi / Hou, Haobo / Huang, Xuquan / Zhou, Min / Wang, Weixing	Enhance hydration properties of steel slag using grinding aids by mechanochemical effect	476-481
Sofi, M. / Mendis, P. A. / Baweja, D.	Estimating early-age in situ strength development of concrete slabs	659-666
Barbosa, F. S. / Farage, M. C. R. / Beaucour, A.-L. / Ortola, S.	Evaluation of aggregate gradation in lightweight concrete via image processing	7-11
Hasdemir, S. / Tuğrul, A. / Yilmaz, M.	Evaluation of alkali reactivity of natural sands	378-385
Liu, Quantao / Schlangen, Erik / van de Ven, Martin / van Bochove, Gerbert / van Montfort, Jo	Evaluation of the induction healing effect of porous asphalt concrete through four point bending fatigue test	403-409
Wang, Xiao-Yong / Lee, Han-Seung	Evaluation of the mechanical properties of concrete considering the effects of temperature and aging	581-590
Movilla-Quesada, Diana / Vega-Zamanillo, Angel / Calzada-Perez, Miguel Angel / Castro-Fresno, Daniel	Evaluation of water effect on bituminous mastics with different contribution fillers and binders	339-347
Sukontasukkul, Piti / Tiamlom, Koshi	Expansion under water and drying shrinkage of rubberized concrete mixed with crumb rubber with different size	520-526
Elsanadedy, Hussein M. / Al-Salloum, Yousef A. / Alsayed, Saleh H. / Iqbal, Rizwan A.	Experimental and numerical investigation of size effects in FRP-wrapped concrete columns	56-72
Cordeiro, G. C. / Toledo Filho, R. D. / Tavares, L. M. / Fairbairn, E. M. R.	Experimental characterization of binary and ternary blended-cement concretes containing ultrafine residual rice husk and sugar cane bagasse ashes	641-646
Kim, Yong-Rak / Pinto, Ingryd / Park, Seong-wan	Experimental evaluation of anti-stripping additives in bituminous mixtures through multiple scale laboratory test results	386-393
Babanajad, Saeed Karim / Farnam, Yaghoob / Shekarchi, Mohammad	Failure criteria and triaxial behaviour of HPFRC containing high reactivity metakaolin and silica fume	215-229
Barra, B. / Momm, L. / Guerrero, Y. / Bernucci, L.	Fatigue behavior of dense asphalt mixes in dry and environmental-conditioning states	128-134
Elrefai, Ahmed / West, Jeffrey / Soudki, Khaled	Fatigue of reinforced concrete beams strengthened with externally post-tensioned CFRP tendons	246-256
Xiao, Jianzhuang / Ying, Jingwei / Shen, Luming	FEM simulation of chloride diffusion in modeled recycled aggregate concrete	12-23
Solla, M. / Lorenzo, H. / Rial, F. I. / Novo, A.	Ground-penetrating radar for the structural evaluation of masonry bridges: Results and interpretational tools	458-465
Yang, Keun-Hyeok / Cho, Ah-Ram / Song, Jin-Kyu / Nam, Sang-Ho	Hydration products and strength development of calcium hydroxide-based alkali-activated slag mortars	410-419
Gastaldi, D. / Canonico, F. / Capelli, L. / Boccaleri, E. / Milanesio, M. / Palin, L. / Croce, G. / Marone, F. / Mader, K. / Stampanoni, M.	In situ tomographic investigation on the early hydration behaviors of cementing systems	284-290
Motamed, Arash / Bahia, Hussain U.	Incorporating temperature into the constitutive equation for plastic deformation in asphalt binders	647-658
Zhang, Qinqin / Fan, Weiyu / Wang, Tiezhu / Nan, Guozhi / Sunarso, Jaka	Influence of emulsification on the properties of styrene–butadiene–styrene chemically modified bitumens	97-101
Siddique, Rafat / Aggarwal, Paratibha / Aggarwal, Yogesh	Influence of water/powder ratio on strength properties of self-compacting concrete containing coal fly ash and bottom ash	73-81
Alani, A. / MacMullen, J. / Telik, O. / Zhang, Z. Y.	Investigation into the thermal performance of recycled glass screed for construction purposes	527-532
Zhu, Jiqing / Wu, Shaopeng / Zhong, Jinjun / Wang, Dongming	Investigation of asphalt mixture containing demolition waste obtained from earthquake-damaged buildings	466-475
Osmancikli, Gökhan / Uçak, Senay / Turan, Fatma Nur / Türker, Temel / Bayraktar, Alemdar	Investigation of restoration effects on the dynamic characteristics of the Hagia Sophia bell-tower by ambient vibration test	564-572
Kan, Li-li / Shi, Hui-sheng	Investigation of self-healing behavior of Engineered Cementitious Composites (ECC) materials	348-356
Mahdavi, M. / Clouston, P. L. / Arwade, S. R.	A low-technology approach toward fabrication of Laminated Bamboo Lumber	257-262
Sebaibi, Nassim / Benzerzour, Mahfoud / Abriak, Nor Edine / Binetruy, Christophe	Mechanical properties of concrete-reinforced fibres and powders with crushed thermoset composites: The influence of fibre/matrix interaction	332-338
Zhang, Jun / Hou, Dongwei / Han, Yudong	Micromechanical modeling on autogenous and drying shrinkages of concrete	230-240
Xu, Weiting / Lo, Tommy Y. / Memon, Shazim Ali	Microstructure and reactivity of rich husk ash	541-547
Wang, Qiang / Feng, Jingjing / Yan, Peiyu	The microstructure of 4-year-old hardened cement-fly ash paste	114-119
Lilkov, Vili / Petrov, Ognyan / Tzvetanova, Yana / Savov, Plamen	Mössbauer, DTA and XRD study of Portland cement blended with fly ash and silica fume	33-41
Masmoudi, Abdelmonem / Ouezdou, Mongi Ben / Bouaziz, Jamel	New parameter design of GFRP RC beams	627-632
Leu, Shao-Yuan / Yang, Tsu-Hsien / Lo, Sheng-Fong / Yang, Te-Hsin	Optimized material composition to improve the physical and mechanical properties of extruded wood–plastic composites (WPCs)	120-127
Toutanji, Houssam A. / Evans, Steve / Grugel, Richard N.	Performance of lunar sulfur concrete in lunar environments	444-448
Shah, Abid A. / Alsayed, Saleh H. / Abbas, H. / Al-Salloum, Yousef A.	Predicting residual strength of non-linear ultrasonically evaluated damaged concrete using artificial neural network	42-50
Yang, Hu / Jiang, Linhua / Zhang, Yan / Pu, Qi / Xu, Yi	Predicting the calcium leaching behavior of cement pastes in aggressive environments	88-96
Ozturk, Ali Ugur / Turan, Mustafa Erkan	Prediction of effects of microstructural phases using generalized regression neural network	279-283
Rashad, Alaa M. / Zeedan, Sayieda R.	A preliminary study of blended pastes of cement and quartz powder under the effect of elevated temperature	672-681
Ahmari, Saeed / Zhang, Lianyang	Production of eco-friendly bricks from copper mine tailings through geopolymerization	323-331
Yan, Shiqin / Sagoe-Crentsil, Kwesi / Shapiro, Gretta	Properties of cement mortar incorporating de-inking waste-water from waste paper recycling	51-55
Kaur, Gurdeep / Siddique, Rafat / Rajor, Anita	Properties of concrete containing fungal treated waste foundry sand	82-87
Jiang, Jian-hua / Yuan, Ying-shu	Quantitative models of climate load and its effect in concrete structure	102-107
Feng, Zhengang / Yu, Jianying / Wu, Shaopeng	Rheological evaluation of bitumen containing different ultraviolet absorbers	591-596
Morea, Francisco / Marcozzi, Rosana / Castaño, Gonzalo	Rheological properties of asphalt binders with chemical tensoactive additives used in Warm Mix Asphalts (WMAs)	135-141
Garrido, M. A. / Paulo, P. V. / Branco, F. A.	Service life prediction of façade paint coatings in old buildings	394-402
Jensen, Jørgen L. / Nakatani, Makoto / Quenneville, Pierre / Walford, Bryan	A simplified model for withdrawal of screws from end-grain of timber	557-563
Monteiro, I. / Branco, F. A. / de Brito, J. / Neves, R.	Statistical analysis of the carbonation coefficient in open air concrete structures	263-269
Nassar, Roz-Ud-Din / Soroushian, Parviz	Strength and durability of recycled aggregate concrete containing milled glass as partial replacement for cement	368-377
Anshari, B. / Guan, Z. W. / Kitamori, A. / Jung, K. / Komatsu, Kokei	Structural behaviour of glued laminated timber beams pre-stressed by compressed wood	24-32
Bediako, Mark / Gawu, S. K. Y. / Adjaottor, A. A.	Suitability of some Ghanaian mineral admixtures for masonry mortar formulation	667-671
Dong, Dawei / Huang, Xiaoxi / Li, Xiaolin / Zhang, Liqun	Swelling process of rubber in asphalt and its effect on the structure and properties of rubber and asphalt	316-322
Luo, Xin / Xu, Jinyu / Bai, Erlei / Li, Weimin	Systematic study on the basic characteristics of alkali-activated slag-fly ash cementitious material system	482-486
Kumar, Mukesh / Singh, N. P. / Singh, Sanjay K. / Singh, N. B.	Tertiary biocomposite cement and its hydration	1-6
Kalogeropoulos, Andreas / Drosopoulos, Georgios A. / Stavroulakis, Georgios E.	Thermal–stress analysis of a three-dimensional end-plate steel joint	619-626
Zhang, Min-Hong / Islam, Jahidul	Use of nano-silica to reduce setting time and increase early strength of concretes with high volumes of fly ash or slag	573-580
Sukontasukkul, Piti / Jamsawang, Pitthaya	Use of steel and polypropylene fibers to improve flexural performance of deep soil–cement column	201-205
Campione, Giuseppe / Colajanni, Simona / Minafò, Giovanni	The use of steel angles for the connection of laminated glass beams: Experiments and modelling	682-689
Bilgin, N. / Yeprem, H. A. / Arslan, S. / Bilgin, A. / Günay, E. / Marşoglu, M.	Use of waste marble powder in brick industry	449-457
Phonphuak, N. / Thiansem, S.	Using charcoal to increase properties and durability of fired test briquettes	612-618
Cassar, Josmar / Camilleri, Josette	Utilisation of imploded glass in structural concrete	299-307
Kim, H. K. / Jeon, J. H. / Lee, H. K.	Workability, and mechanical, acoustic and thermal properties of lightweight aggregate concrete with a high volume of entrained air	193-200

Über diese
Datenseite
IssueID
22495
Veröffentlicht am:
16.12.2018
Geändert am:
30.06.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - April 2012

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - April 2012

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.