Construction and Building Materials - Februar 2012

Erschienen:	Februar 2012

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Grdic, Zoran J. / Curcic, Gordana A. Toplicic / Ristic, Nenad S. / Despotovic, Iva M.	Abrasion resistance of concrete micro-reinforced with polypropylene fibers	305-312
Enfedaque, Alejandro / Paradela, Laura Sánchez / Sánchez-Gálvez, Vicente	An alternative methodology to predict aging effects on the mechanical properties of glass fiber reinforced cements (GRC)	425-431
André, A. / Haghani, R. / Biel, A.	Application of fracture mechanics to predict the failure load of adhesive joints used to bond CFRP laminates to steel members	331-340
Shakya, Kabir / Watanabe, Ken / Matsumoto, Koji / Niwa, Junichiro	Application of steel fibers in beam–column joints of rigid-framed railway bridges to reduce longitudinal and shear rebars	482-489
Zoorob, S. E. / Castro-Gomes, J. P. / Pereira Oliveira, L. A.	Assessing low shear viscosity as the new bitumen Softening Point test	357-367
Mena, Josué / Vera, Sergio / Correal, Juan F. / Lopez, Mauricio	Assessment of fire reaction and fire resistance of Guadua angustifolia kunth bamboo	60-65
Rizwan, Syed Ali / Bier, Thomas A.	Blends of limestone powder and fly-ash enhance the response of self-compacting mortars	398-403
Martínez-Ramírez, Sagrario / Fernández-Carrasco, Lucia	Carbonation of ternary cement systems	313-318
Zhang, Mingzhong / He, Yongjia / Ye, Guang / Lange, David A. / Van Breugel, Klaas	Computational investigation on mass diffusivity in Portland cement paste based on X-ray computed microtomography (μCT) image	472-481
Zeng, Qiang / Li, Kefei / Fen-chong, Teddy / Dangla, Patrick	Determination of cement hydration and pozzolanic reaction extents for fly-ash cement pastes	560-569
Djerbi Tegguer, A.	Determining the water absorption of recycled aggregates utilizing hydrostatic weighing approach	112-116
Kim, Jang-Ho Jay / Phan, Hung Duc / Kim, Byung-Yun / Choi, Jung-Wook / Han, Tong-Seok	Development of satisfaction curves to evaluate concrete mix design performance using a Bayesian probabilistic method	578-584
Rörig-Dalgaard, I. / Ottosen, L. M. / Hansen, K. K.	Diffusion and electromigration in clay bricks influenced by differences in the pore system resulting from firing	390-397
Louter, Christian / Belis, Jan / Veer, Frederic / Lebet, Jean-Paul	Durability of SG-laminated reinforced glass beams: Effects of temperature, thermal cycling, humidity and load-duration	280-292
Ortega, J. M. / Sánchez, I. / Climent, M. A.	Durability related transport properties of OPC and slag cement mortars hardened under different environmental conditions	176-183
Pereira-de-Oliveira, Luiz A. / Castro-Gomes, João P. / Nepomuceno, Miguel C. S.	Effect of acrylic fibres geometry on physical, mechanical and durability properties of cement mortars	189-196
Uysal, Mucteba / Yilmaz, Kemalettin / Ipek, Metin	The effect of mineral admixtures on mechanical properties, chloride ion permeability and impermeability of self-compacting concrete	263-270
Zhang, Henglong / Yu, Jianying / Wu, Shaopeng	Effect of montmorillonite organic modification on ultraviolet aging properties of SBS modified bitumen	553-559
Jain, Neeraj	Effect of nonpozzolanic and pozzolanic mineral admixtures on the hydration behavior of ordinary Portland cement	39-44
Wang, Ru / Wang, Pei-Ming / Yao, Li-Juan	Effect of redispersible vinyl acetate and versatate copolymer powder on flexibility of cement mortar	259-262
Aymerich, F. / Fenu, L. / Meloni, P.	Effect of reinforcing wool fibres on fracture and energy absorption properties of an earthen material	66-72
Martí-Vargas, J. R. / Serna, P. / Navarro-Gregori, J. / Bonet, J. L.	Effects of concrete composition on transmission length of prestressing strands	350-356
Kakooei, Saeid / Md Akil, Hazizan / Jamshidi, Morteza / Rouhi, Jalal	The effects of polypropylene fibers on the properties of reinforced concrete structures	73-77
Baoyi, Li / Yuping, Duan / Shunhua, Liu	The electromagnetic characteristics of fly ash and absorbing properties of cement-based composites using fly ash as cement replacement	184-188
Uysal, Mucteba / Tanyildizi, Harun	Estimation of compressive strength of self compacting concrete containing polypropylene fiber and mineral additives exposed to high temperature using artificial neural network	404-414
Zhi, Suo / Gun, Wong Wing / Hui, Luo Xiao / Bo, Tian	Evaluation of fatigue crack behavior in asphalt concrete pavements with different polymer modifiers	117-125
Reis, J. M. L. / Carneiro, E. P.	Evaluation of PET waste aggregates in polymer mortars	107-111
Ashori, Alireza / Tabarsa, Taghi / Amosi, Fatemeh	Evaluation of using waste timber railway sleepers in wood–cement composite materials	126-129
Xie, J. H. / Huang, P. Y. / Guo, Y. C.	Fatigue behavior of reinforced concrete beams strengthened with prestressed fiber reinforced polymer	149-157
Xiao, Feipeng / Amirkhanian, Serji N. / Putman, Bradley J. / Juang, Hsein	Feasibility of Superpave gyratory compaction of rubberized asphalt concrete mixtures containing reclaimed asphalt pavement	432-438
Iskender, Erol / Aksoy, Atakan	Field and laboratory performance comparison for asphalt mixtures with different moisture conditioning systems	45-53
El-Dieb, A. S. / Reda Taha, M. M.	Flow characteristics and acceptance criteria of fiber-reinforced self-compacted concrete (FR-SCC)	585-596
Ficker, Tomáš	Fracture surfaces and compressive strength of hydrated cement pastes	197-205
Tan, Yiqiu / Shan, Liyan / Kim, Y. Richard / Underwood, B. Shane	Healing characteristics of asphalt binder	570-577
Chandara, Chea / Azizli, Khairun Azizi Mohd / Ahmad, Zainal Arifin / Hashim, Syed Fuad Saiyid / Sakai, Etsuo	Heat of hydration of blended cement containing treated ground palm oil fuel ash	78-81
Muhammad, Bala / Ismail, Mohammad / Bhutta, Muhammad Aamer Rafique / Abdul-Majid, Zaiton	Influence of non-hydrocarbon substances on the compressive strength of natural rubber latex-modified concrete	241-246
Banerjee, Ambarish / Smit, Andre de Fortier / Prozzi, Jorge A.	Influence of operational tolerances on HMA performance	15-23
Mas, Benito / Cladera, Antoni / Olmo, Teodoro del / Pitarch, Francisco	Influence of the amount of mixed recycled aggregates on the properties of concrete for non-structural use	612-622
Boulekbache, Bensaid / Hamrat, Mostefa / Chemrouk, Mohamed / Amziane, Sofiane	Influence of yield stress and compressive strength on direct shear behaviour of steel fibre-reinforced concrete	6-14
Zhou, Xiangming / Li, Zongjin	Light-weight wood–magnesium oxychloride cement composite building products made by extrusion	382-389
Shafigh, Payam / Jumaat, Mohd Zamin / Mahmud, Hilmi Bin / Hamid, Norjidah Anjang Abd	Lightweight concrete made from crushed oil palm shell: Tensile strength and effect of initial curing on compressive strength	252-258
Leijten, A. J. M. / Jorissen, A. J. M. / de Leijer, B. J. C.	The local bearing capacity perpendicular to grain of structural timber elements	54-59
Orlowsky, Jeanette	Measuring the layer thicknesses of concrete coatings by mobile NMR – A study on the influence of steel reinforcements	341-349
Najim, Khalid B. / Hall, Matthew R.	Mechanical and dynamic properties of self-compacting crumb rubber modified concrete	521-530
Elalaoui, Oussama / Ghorbel, Elhem / Mignot, Valérie / Ouezdou, Mongi Ben	Mechanical and physical properties of epoxy polymer concrete after exposure to temperatures up to 250°C	415-424
Mitra, Kalhan / Das, Animesh / Basu, Sumit	Mechanical behavior of asphalt mix: An experimental and numerical study	545-552
Xu, Yi / Jiang, Linhua / Xu, Jinxia / Li, Yang	Mechanical properties of expanded polystyrene lightweight aggregate concrete and brick	32-38
Pothisiri, Thanyawat / Panedpojaman, Pattamad	Modeling of bonding between steel rebar and concrete at elevated temperatures	130-140
Park, Sang-Soon / Kwon, Seung-Jun / Jung, Sang Hwa / Lee, Sang-Woong	Modeling of water permeability in early aged concrete with cracks based on micro pore structure	597-604
Banerjee, Ambarish / Smit, Andre de Fortier / Prozzi, Jorge A.	Modeling the effect of environmental factors on evaporative water loss in asphalt emulsions for chip seal applications	158-164
Hawileh, Rami A.	Nonlinear finite element modeling of RC beams strengthened with NSM FRP rods	461-471
Kurosky, J. / Hughes, B. / Zalok, E. / El Halim, A. O. Abd / Tolba, A.	On ameliorating the residual strength of reinforced concrete panels subjected to elevated temperature	623-629
O'Connell, Martin / McNally, Ciaran / Richardson, Mark G.	Performance of concrete incorporating GGBS in aggressive wastewater environments	368-374
Guerrini, Gian Luca	Photocatalytic performances in a city tunnel in Rome: NOx monitoring results	165-175
Gu, Dong-Sheng / Wu, Yu-Fei / Wu, Gang / Wu, Zhi-Shen	Plastic hinge analysis of FRP confined circular concrete columns	223-233
Huang, Xiao-yan / Ni, Wen / Cui, Wei-hua / Wang, Zhong-jie / Zhu, Li-ping	Preparation of autoclaved aerated concrete using copper tailings and blast furnace slag	1-5
Rao, K. Balaji / Bhaskar Desai, V. / Jagan Mohan, D.	Probabilistic analysis of Mode II fracture of concrete with crushed granite stone fine aggregate replacing sand	319-330
Alhozaimy, A. / Jaafar, M. S. / Al-Negheimish, A. / Abdullah, A. / Taufiq-Yap, Y. H. / Noorzaei, J. / Alawad, O. A.	Properties of high strength concrete using white and dune sands under normal and autoclaved curing	218-222
Spiesz, P. / Ballari, M. M. / Brouwers, H. J. H.	RCM: A new model accounting for the non-linear chloride binding isotherm and the non-equilibrium conditions between the free- and bound-chloride concentrations	293-304
Alonso-Santurde, R. / Coz, A. / Viguri, J. R. / Andrés, A.	Recycling of foundry by-products in the ceramic industry: Green and core sand in clay bricks	97-106
Raut, S. P. / Sedmake, Rohant / Dhunde, Sunil / Ralegaonkar, R. V. / Mandavgane, Sachin A.	Reuse of recycle paper mill waste in energy absorbing light weight bricks	247-251
Shivokhin, M. / García-Morales, M. / Partal, P. / Cuadri, A. A. / Gallegos, C.	Rheological behaviour of polymer-modified bituminous mastics: A comparative analysis between physical and chemical modification	234-240
Rahhal, V. / Bonavetti, V. / Trusilewicz, L. / Pedrajas, C. / Talero, R.	Role of the filler on Portland cement hydration at early ages	82-90
Dai, Jian-Guo / Lam, Lik / Ueda, Tamon	Seismic retrofit of square RC columns with polyethylene terephthalate (PET) fibre reinforced polymer composites	206-217
Li, Qiang / Lee, Hyun Jong / Kim, Tae Woo	A simple fatigue performance model of asphalt mixtures based on fracture energy	605-611
Carpinteri, A. / Corrado, M. / Goso, G. / Paggi, M.	Size-scale effects on interaction diagrams for reinforced concrete columns	271-279
Ceci, Alfredo M. / Casas, Joan R. / Ghosn, Michel	Statistical analysis of existing models for flexural strengthening of concrete bridge beams using FRP sheets	490-520
Xiao, Y. / van de Ven, M. F. C. / Molenaar, A. A. A. / Wu, S. P.	Stress and strain analysis in tar-containing antiskid runways using finite element models	24-31
Zhang, Yanrong / Kong, Xiangming / Hou, Shanshan / Liu, Yongliang / Han, Song	Study on the rheological properties of fresh cement asphalt paste	534-544
Atcholi, K.-E. / Padayodi, E. / Sagot, J.-C. / Beda, T. / Samah, O. / Vantomme, J.	Thermo-mechanical behaviour of the structures of tropical clays from Togo (West Africa) fired at 500°C, 850°C and 1060°C	141-148
Carrasco, E. V. M. / Rodrigues, E. V. / Ribeiro, G. O. / Queiroz, G. / De Paula, F. A.	Ultimate compressive strength of Enveloped Laminar Concrete panels	375-381
Ahmad, S. / Elahi, A. / Barbhuiya, S. A. / Farid, Y.	Use of polymer modified mortar in controlling cracks in reinforced concrete beams	91-96
Zhao, Feng-qing / Liu, Hong-jie / Hao, Li-xia / Li, Qian	Water resistant block from desulfurization gypsum	531-533

Über diese
Datenseite
IssueID
22493
Veröffentlicht am:
16.12.2018
Geändert am:
26.07.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - Februar 2012

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - Februar 2012

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.