Construction and Building Materials - v. 25, n. 7 (Juli 2011)

Erschienen:	Juli 2011

Autor(en)	Titel	Seite(n)
Živica, Vladimir / Krizma, Martin	Dependence of efficiency of pressure compaction on the cement type used	3073-3077
Rashad, Alaa M. / Zeedan, Sayieda R.	The effect of activator concentration on the residual strength of alkali-activated fly ash pastes subjected to thermal load	3098-3107
Zhang, Tongsheng / Yu, Qijun / Wei, Jiangxiong / Zhang, Pingping	Effects of size fraction on composition and fundamental properties of Portland cement	3038-3043
Lee, Byoung-Ho / Kim, Hee-Soo / Kim, Sumin / Kim, Hyun-Joong / Lee, Bongwoo / Deng, Yuhe / Feng, Qian / Luo, Jiayan	Evaluating the flammability of wood-based panels and gypsum particleboard using a cone calorimeter	3044-3050
Fu, Yawei / Cai, Liangcai / Yonggen, Wu	Freeze–thaw cycle test and damage mechanics models of alkali-activated slag concrete	3144-3148
Raman, S. N. / Ngo, T. / Mendis, P. / Mahmud, H. B.	High-strength rice husk ash concrete incorporating quarry dust as a partial substitute for sand	3123-3130
Yadollahi, Golzin / Sabbagh Mollahosseini, Hamid	Improving the performance of Crumb Rubber bitumen by means of Poly Phosphoric Acid (PPA) and Vestenamer additives	3108-3116
Hover, Kenneth C.	The influence of water on the performance of concrete	3003-3013
Nevers, Damian / Zhao, Jian / Sobolev, Konstantine / Hanson, George	Investigation of strain-sensing materials based on EM surface wave propagation for steel bridge health monitoring	3024-3029
Schäfers, Martin / Seim, Werner	Investigation on bonding between timber and ultra-high performance concrete (UHPC)	3078-3088
Vega, Paula / Juan, Andrés / Ignacio Guerra, M. / Morán, Julia Mª / Aguado, Pedro J. / Llamas, Bernardo	Mechanical characterisation of traditional adobes from the north of Spain	3020-3023
Yu, Q. L. / Brouwers, H. J. H.	Microstructure and mechanical properties of β-hemihydrate produced gypsum: An insight from its hydration process	3149-3157
Aggelis, D. G. / Kordatos, E. Z. / Strantza, M. / Soulioti, D. V. / Matikas, T. E.	NDT approach for characterization of subsurface cracks in concrete	3089-3097
Chen, Jun / Pan, Tongyan / Huang, Xiaoming	Numerical investigation into the stiffness anisotropy of asphalt concrete from a microstructural perspective	3059-3065
Qian, Zhendong / Chen, Leilei / Jiang, Chenlong / Luo, Sang	Performance evaluation of a lightweight epoxy asphalt mixture for bascule bridge pavements	3117-3122
Muralidhara, S. / Prasad, B. K. Raghu / Karihaloo, B. L. / Singh, R. K.	Size-independent fracture energy in plain concrete beams using tri-linear model	3051-3058
Emir, Ercan / Konuk, Adnan / Daloğlu, Gülnaz	Strength enhancement of Eskisehir tuff ashlars in Turkey	3014-3019
Ma, Hailong / Cui, Chong / Li, Xing / Sun, Zhangao	Study of high performance autoclaved shell-aggregate from propylene oxide sludge	3030-3037
Acebes, M. / Molero, M. / Segura, I. / Moragues, A. / Hernández, M. G.	Study of the influence of microstructural parameters on the ultrasonic velocity in steel–fiber-reinforced cementitious materials	3066-3072
Soutsos, Marios N. / Tang, Kangkang / Millard, Stephen G.	Use of recycled demolition aggregate in precast products, phase II: Concrete paving blocks	3131-3143

Autor(en)

Titel

Seite(n)

Živica, Vladimir / Krizma, Martin

Dependence of efficiency of pressure compaction on the cement type used

3073-3077

Rashad, Alaa M. / Zeedan, Sayieda R.

The effect of activator concentration on the residual strength of alkali-activated fly ash pastes subjected to thermal load

3098-3107

Zhang, Tongsheng / Yu, Qijun / Wei, Jiangxiong / Zhang, Pingping

Effects of size fraction on composition and fundamental properties of Portland cement

3038-3043