Construction and Building Materials - v. 25, n. 3 (März 2011)

Erschienen:	März 2011

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Lee, Soon-Jae / Hu, Jiong / Kim, Hakseo / Amirkhanian, Serji N. / Jeong, Kyu-Dong	Aging analysis of rubberized asphalt binders and mixes using gel permeation chromatography	1485-1490
Tinoco, Joaquim / Gomes Correia, A. / Cortez, Paulo	Application of data mining techniques in the estimation of the uniaxial compressive strength of jet grouting columns over time	1257-1262
Oh, Sei-Chang	Applying failure criteria to the strength evaluation of 3-ply laminated veneer lumber according to grain direction by uniaxial tension test	1480-1484
Shen, Shihui / Yu, Huanan	Characterize packing of aggregate particles for paving materials: Particle size impact	1362-1368
Felekoğlu, Burak / Tosun, Kamile / Baradan, Bülent	Compatibility of a polycarboxylate-based superplasticiser with different set-controlling admixtures	1466-1473
Guettala, Salim / Mezghiche, Bouzidi	Compressive strength and hydration with age of cement pastes containing dune sand powder	1263-1269
Wei, J. / Dong, J. H. / Ke, W.	Corrosion resistant performance of a chemical quenched rebar in concrete	1243-1247
Gu, Xianglin / Song, Xiaobin / Lin, Feng / Li, Chao / Jin, Xianyu	Cracking behaviour of cast in situ reinforced concrete slabs with control joints	1398-1406
Caré, Sabine / Derkx, François	Determination of relevant parameters influencing gas permeability of mortars	1248-1256
Kockal, Niyazi Ugur / Özturan, Turan	Durability of lightweight concretes with lightweight fly ash aggregates	1430-1438
Abdessemed, M. / Kenai, S. / Bali, A. / Kibboua, A.	Dynamic analysis of a bridge repaired by CFRP: Experimental and numerical modelling	1270-1276
Yildirim, Hasan / Ilica, Tolga / Sengul, Ozkan	Effect of cement type on the resistance of concrete against chloride penetration	1282-1288
Hu, Jiong / Wang, Kejin	Effect of coarse aggregate characteristics on concrete rheology	1196-1204
Arabani, M.	Effect of glass cullet on the improvement of the dynamic behaviour of asphalt concrete	1181-1185
Hussain, Raja Rizwan / Ishida, Tetsuya	Enhanced electro-chemical corrosion model for reinforced concrete under severe coupled action of chloride and temperature	1305-1315
Espeche, Ariel D. / Leon, Javier	Estimation of bond strength envelopes for old-to-new concrete interfaces based on a cylinder splitting test	1222-1235
Mohammed, Bashar S. / Azmi, Najwa Juaini / Abdullahi, M.	Evaluation of rubbercrete based on ultrasonic pulse velocity and rebound hammer tests	1388-1397
Sales, Almir / Candian, Marcela / de Salles Cardin, Viviane	Evaluation of the mechanical properties of Brazilian lumber (Goupia glabra) by nondestructive techniques	1450-1454
Badawi, Moataz / Wahab, Noran / Soudki, Khaled	Evaluation of the transfer length of prestressed near surface mounted CFRP rods in concrete	1474-1479
Talero, Rafael	Expansive synergic effect of ettringite from pozzolan (metakaolin) and from OPC, co-precipitating in a common plaster-bearing solution. Part II: Fundamentals, explanation and justification	1139-1158
El-Ghandour, A. A.	Experimental and analytical investigation of CFRP flexural and shear strengthening efficiencies of RC beams	1419-1429
Shin, Hong-chol / Miyauchi, Hiroyuki / Tanaka, Kyoji	An experimental study of fatigue resistance in epoxy injection for cracked mortar and concrete considering the temperature effect	1316-1324
Valdés, Gonzalo / Pérez-Jiménez, Félix / Miró, Rodrigo / Martínez, Adriana / Botella, Ramón	Experimental study of recycled asphalt mixtures with high percentages of reclaimed asphalt pavement (RAP)	1289-1297
Hossain, M. Z. / Awal, A. S. M. A.	Experimental validation of a theoretical model for flexural modulus of elasticity of thin cement composite	1460-1465
Espinoza-Hijazin, Gaston / Lopez, Mauricio	Extending internal curing to concrete mixtures with W/C higher than 0.42	1236-1242
Chen, Dar-Hao / Lin, Huang-Hsiung / Sun, Renjuan	Field performance evaluations of partial-depth repairs	1369-1378
Alavi, Amir Hossein / Ameri, Mahmoud / Gandomi, Amir Hossein / Mirzahosseini, Mohammad Reza	Formulation of flow number of asphalt mixes using a hybrid computational method	1338-1355
Courard, Luc / Michel, Frédéric / Pierard, Julie	Influence of clay in limestone fillers for self-compacting cement based composites	1356-1361
Erdogdu, Sakir / Arslantürk, Caner / Kurbetci, Şirin	Influence of fly ash and silica fume on the consistency retention and compressive strength of concrete subjected to prolonged agitating	1277-1281
Michel, Marie / Georgin, Jean-François / Ambroise, Jean / Pera, Jean	The influence of gypsum ratio on the mechanical performance of slag cement accelerated by calcium sulfoaluminate cement	1298-1304
Hossain, K. M. A. / Ahmed, S. / Lachemi, M.	Lightweight concrete incorporating pumice based blended cement and aggregate: Mechanical and durability characteristics	1186-1195
Yi, Seong-Tae / Pae, Sue-Won / Kim, Jin-Keun	Minimum curing time prediction of early-age concrete to prevent frost damage	1439-1449
Vejmelková, Eva / Keppert, Martin / Grzeszczyk, Stefania / Skaliński, Bartłomiej / Černý, Robert	Properties of self-compacting concrete mixtures containing metakaolin and blast furnace slag	1325-1331
Haddad, R. H. / AL-Mekhlafy, N. / Ashteyat, A. M.	Repair of heat-damaged reinforced concrete slabs using fibrous composite materials	1213-1221
Santa-Maria, Hernan / Alcaino, Pablo	Repair of in-plane shear damaged masonry walls with external FRP	1172-1180
Alvarez, Allex E. / Martin, Amy Epps / Estakhri, Cindy	A review of mix design and evaluation research for permeable friction course mixtures	1159-1166
Pavlíková, Milena / Pavlík, Zbyšek / Keppert, Martin / Černý, Robert	Salt transport and storage parameters of renovation plasters and their possible effects on restored buildings' walls	1205-1212
Ye, S. / Sun, Y. / Xiong, G. J.	A simple and rational beam segment model for analyzing intermediate crack-induced debonding in FRP-strengthened beams	1332-1337
Haido, James H. / Bakar, B. H. Abu / Abdul-Razzak, A. A. / Jayaprakash, J. / Choong, K. K.	Simulation of dynamic response for steel fibrous concrete members using new material modeling	1407-1418
Topçu, İlker Bekir / Toprak, Mehmet Uğur	Strength estimation of unisothermally cured concretes with matrices	1455-1459
Ameri, Mahmoud / Mansourian, Ahmad / Ashani, Saeid Salehi / Yadollahi, Golazin	Technical study on the Iranian Gilsonite as an additive for modification of asphalt binders used in pavement construction	1379-1387
Hebhoub, H. / Aoun, H. / Belachia, M. / Houari, H. / Ghorbel, E.	Use of waste marble aggregates in concrete	1167-1171

Über diese
Datenseite
IssueID
22465
Veröffentlicht am:
16.12.2018
Geändert am:
16.12.2018

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - v. 25, n. 3 (März 2011)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - v. 25, n. 3 (März 2011)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.