Construction and Building Materials - v. 23, n. 3 (März 2009)

Erschienen:	März 2009

Autor(en)	Titel	Seite(n)
Harajli, Mohamed H.	Bond strengthening of lap spliced reinforcement using external FRP jackets: An effective technique for seismic retrofit of rectangular or circular RC columns	1265-1278
Zornoza, Emilio / Payá, Jordi / Monzó, José / Borrachero, María V. / Garcés, Pedro	The carbonation of OPC mortars partially substituted with spent fluid catalytic catalyst (FC3R) and its influence on their mechanical properties	1323-1328
Kulakowski, Marlova P. / Pereira, Fernanda M. / Molin, Denise C. C. Dal	Carbonation-induced reinforcement corrosion in silica fume concrete	1189-1195
Suresha, S. N. / Varghese, George / Shankar, A. U. Ravi	A comparative study on properties of porous friction course mixes with neat bitumen and modified binders	1211-1217
Mills-Beale, Julian / You, Zhanping / Williams, R. Christopher / Dai, Qingli	Determining the specific gravities of coarse aggregates utilizing vacuum saturation approach	1316-1322
Martinez-Ramirez, S. / Frías, M.	The effect of curing temperature on white cement hydration	1344-1348
Kondraivendhan, B. / Pradhan, Bulu	Effect of ferrocement confinement on behavior of concrete	1218-1222
Tanaçan, Leyla / Ersoy, Halit Yaşa / Arpacıoğlu, Ümit	Effect of high temperature and cooling conditions on aerated concrete properties	1240-1248
Lo, T. Y. / Nadeem, A. / Tang, W. C. P. / Yu, P. C.	The effect of high temperature curing on the strength and carbonation of pozzolanic structural lightweight concretes	1306-1310
Al-Hadidy, A. I. / Yi-qiu, Tan	Effect of polyethylene on life of flexible pavements	1456-1464
Niazi, Y. / Jalili, M.	Effect of Portland cement and lime additives on properties of cold in-place recycled mixtures with asphalt emulsion	1338-1343
Bederina, M. / Laidoudi, B. / Goullieux, A. / Khenfer, M. M. / Bali, A. / Queneudec, M.	Effect of the treatment of wood shavings on the physico-mechanical characteristics of wood sand concretes	1311-1315
Atahan, Hakan Nuri / Oktar, Osman Nuri / Tasdemir, Mehmet Ali	Effects of water–cement ratio and curing time on the critical pore width of hardened cement paste	1196-1200
de Rincón, O. / Rincón, A. / Sanchez, M. / Romero, N. / Salas, O. / Delgado, R. / López, B. / Uruchurtu, J. / Marroco, M. / Panosian, Zephir	Evaluating Zn, Al and Al–Zn coatings on carbon steel in a special atmosphere	1465-1471
Go, Seong-Seok / Lee, Hyun-Chul / Lee, Jae-Yong / Kim, Ji-Hyun / Chung, Chul-Woo	Experimental investigation of mortars using activated Hwangtoh	1438-1445
Tahir, Mahmood Md / Shek, Poi Ngian / Sulaiman, Arizu / Tan, Cher Siang	Experimental investigation of short cruciform columns using universal beam sections	1354-1364
Wang, Shanyong / Chan, Dave / Lam, Ka Chi	Experimental study of the effect of fines content on dynamic compaction grouting in completely decomposed granite of Hong Kong	1249-1264
Wullschleger, L. / Manz, H. / Ghazi Wakili, K.	Finite element analysis of temperature-induced deflection of vacuum glazing	1378-1388
Chakchouk, Ahlem / Trifi, Lotfi / Samet, Basma / Bouaziz, Samir	Formulation of blended cement: Effect of process variables on clay pozzolanic activity	1365-1373
Magallanes-Rivera, R. X. / Escalante-García, J. I. / Gorokhovsky, A.	Hydration reactions and microstructural characteristics of hemihydrate with citric and malic acid	1298-1305
Li, Jiusu / Xiao, Hanning / Zhou, Yong	Influence of coating recycled aggregate surface with pozzolanic powder on properties of recycled aggregate concrete	1287-1291
Frías, Moisés / Sánchez de Rojas, M. Isabel / Rodríguez, Cristina	The influence of SiMn slag on chemical resistance of blended cement pastes	1472-1475
Nunes, Sandra / Oliveira, Paula Milheiro / Coutinho, Joana Sousa / Figueiras, Joaquim	Interaction diagrams to assess SCC mortars for different cement types	1401-1412
Haghani, Reza / Al-Emrani, Mohammad / Kliger, Robert	Interfacial stress analysis of geometrically modified adhesive joints in steel beams strengthened with FRP laminates	1413-1422
Cachim, Paulo B.	Mechanical properties of brick aggregate concrete	1292-1297
Yazıcı, Halit / Yardımcı, Mert Yücel / Aydın, Serdar / Karabulut, Anıl Ş.	Mechanical properties of reactive powder concrete containing mineral admixtures under different curing regimes	1223-1231
El-Turki, A. / Carter, M. A. / Wilson, M. A. / Ball, R. J. / Allen, G. C.	A microbalance study of the effects of hydraulicity and sand grain size on carbonation of lime and cement	1423-1428
Sideris, K. K. / Manita, P. / Chaniotakis, E.	Performance of thermally damaged fibre reinforced concretes	1232-1239
Köksal, H. O. / Doran, B. / Turgay, T.	A practical approach for modeling FRP wrapped concrete columns	1429-1437
Sarıdemir, Mustafa / Topçu, İlker Bekir / Özcan, Fatih / Severcan, Metin Hakan	Prediction of long-term effects of GGBFS on compressive strength of concrete by artificial neural networks and fuzzy logic	1279-1286
Alyamaç, Kürşat Esat / Ince, Ragip	A preliminary concrete mix design for SCC with marble powders	1201-1210
Cangiano, Stefano / Meda, Alberto / Plizzari, Giovanni A.	Rapid hardening concrete for the construction of a small span bridge	1329-1337
Aderinlewo, Olufikayo / Okine, Nii-Attoh	Sensitivity analysis of a scrap tire embankment using Bayesian influence diagrams	1446-1455
Cardoso, Fábio A. / Agopyan, Anne K. / Carbone, Carlos / Pileggi, Rafael G. / John, Vanderley M.	Squeeze flow as a tool for developing optimized gypsum plasters	1349-1353
Xing, Feng / Dong, Biqin / Li, Zongjin	The study of pore structure and its influence on material properties of cement-based piezoelectric ceramic composites	1374-1377
Barrios Padura, A. / Barrios Sevilla, J. / García Navarro, J. / Bustamante, E. Yanes / Crego, E. Parra	Study of the soil consolidation using reinforced jet grouting by geophysical and geotechnical techniques: "La Normal" building complex (Granada)	1389-1400
Medeiros, M. H. F. / Helene, P.	Surface treatment of reinforced concrete in marine environment: Influence on chloride diffusion coefficient and capillary water absorption	1476-1484

Autor(en)

Titel

Seite(n)

Harajli, Mohamed H.

Bond strengthening of lap spliced reinforcement using external FRP jackets: An effective technique for seismic retrofit of rectangular or circular RC columns

1265-1278

Zornoza, Emilio / Payá, Jordi / Monzó, José / Borrachero, María V. / Garcés, Pedro

The carbonation of OPC mortars partially substituted with spent fluid catalytic catalyst (FC3R) and its influence on their mechanical properties

1323-1328

Kulakowski, Marlova P. / Pereira, Fernanda M. / Molin, Denise C. C. Dal

Carbonation-induced reinforcement corrosion in silica fume concrete

1189-1195

Suresha, S. N. / Varghese, George / Shankar, A. U. Ravi

A comparative study on properties of porous friction course mixes with neat bitumen and modified binders

1211-1217

Mills-Beale, Julian / You, Zhanping / Williams, R. Christopher / Dai, Qingli

Determining the specific gravities of coarse aggregates utilizing vacuum saturation approach

1316-1322

Martinez-Ramirez, S. / Frías, M.

The effect of curing temperature on white cement hydration

1344-1348

Kondraivendhan, B. / Pradhan, Bulu

Effect of ferrocement confinement on behavior of concrete

1218-1222

Tanaçan, Leyla / Ersoy, Halit Yaşa / Arpacıoğlu, Ümit

Effect of high temperature and cooling conditions on aerated concrete properties

1240-1248

Lo, T. Y. / Nadeem, A. / Tang, W. C. P. / Yu, P. C.

The effect of high temperature curing on the strength and carbonation of pozzolanic structural lightweight concretes

1306-1310

Al-Hadidy, A. I. / Yi-qiu, Tan

Effect of polyethylene on life of flexible pavements

1456-1464

Niazi, Y. / Jalili, M.

Effect of Portland cement and lime additives on properties of cold in-place recycled mixtures with asphalt emulsion

1338-1343

Bederina, M. / Laidoudi, B. / Goullieux, A. / Khenfer, M. M. / Bali, A. / Queneudec, M.

Effect of the treatment of wood shavings on the physico-mechanical characteristics of wood sand concretes

1311-1315

Atahan, Hakan Nuri / Oktar, Osman Nuri / Tasdemir, Mehmet Ali

Effects of water–cement ratio and curing time on the critical pore width of hardened cement paste

1196-1200

de Rincón, O. / Rincón, A. / Sanchez, M. / Romero, N. / Salas, O. / Delgado, R. / López, B. / Uruchurtu, J. / Marroco, M. / Panosian, Zephir

Evaluating Zn, Al and Al–Zn coatings on carbon steel in a special atmosphere

1465-1471

Go, Seong-Seok / Lee, Hyun-Chul / Lee, Jae-Yong / Kim, Ji-Hyun / Chung, Chul-Woo

Experimental investigation of mortars using activated Hwangtoh

1438-1445

Tahir, Mahmood Md / Shek, Poi Ngian / Sulaiman, Arizu / Tan, Cher Siang

Experimental investigation of short cruciform columns using universal beam sections

1354-1364

Wang, Shanyong / Chan, Dave / Lam, Ka Chi

Experimental study of the effect of fines content on dynamic compaction grouting in completely decomposed granite of Hong Kong

1249-1264

Wullschleger, L. / Manz, H. / Ghazi Wakili, K.

Finite element analysis of temperature-induced deflection of vacuum glazing

1378-1388

Chakchouk, Ahlem / Trifi, Lotfi / Samet, Basma / Bouaziz, Samir

Formulation of blended cement: Effect of process variables on clay pozzolanic activity

1365-1373

Magallanes-Rivera, R. X. / Escalante-García, J. I. / Gorokhovsky, A.

Hydration reactions and microstructural characteristics of hemihydrate with citric and malic acid

1298-1305

Li, Jiusu / Xiao, Hanning / Zhou, Yong

Influence of coating recycled aggregate surface with pozzolanic powder on properties of recycled aggregate concrete

1287-1291

Frías, Moisés / Sánchez de Rojas, M. Isabel / Rodríguez, Cristina

The influence of SiMn slag on chemical resistance of blended cement pastes

1472-1475

Nunes, Sandra / Oliveira, Paula Milheiro / Coutinho, Joana Sousa / Figueiras, Joaquim

Interaction diagrams to assess SCC mortars for different cement types

1401-1412

Haghani, Reza / Al-Emrani, Mohammad / Kliger, Robert

Interfacial stress analysis of geometrically modified adhesive joints in steel beams strengthened with FRP laminates

1413-1422

Cachim, Paulo B.

Mechanical properties of brick aggregate concrete

1292-1297

Yazıcı, Halit / Yardımcı, Mert Yücel / Aydın, Serdar / Karabulut, Anıl Ş.

Mechanical properties of reactive powder concrete containing mineral admixtures under different curing regimes

1223-1231

El-Turki, A. / Carter, M. A. / Wilson, M. A. / Ball, R. J. / Allen, G. C.

A microbalance study of the effects of hydraulicity and sand grain size on carbonation of lime and cement

1423-1428

Sideris, K. K. / Manita, P. / Chaniotakis, E.

Performance of thermally damaged fibre reinforced concretes

1232-1239

Köksal, H. O. / Doran, B. / Turgay, T.

A practical approach for modeling FRP wrapped concrete columns

1429-1437

Sarıdemir, Mustafa / Topçu, İlker Bekir / Özcan, Fatih / Severcan, Metin Hakan

Prediction of long-term effects of GGBFS on compressive strength of concrete by artificial neural networks and fuzzy logic

1279-1286

Alyamaç, Kürşat Esat / Ince, Ragip

A preliminary concrete mix design for SCC with marble powders

1201-1210

Cangiano, Stefano / Meda, Alberto / Plizzari, Giovanni A.

Rapid hardening concrete for the construction of a small span bridge

1329-1337

Aderinlewo, Olufikayo / Okine, Nii-Attoh

Sensitivity analysis of a scrap tire embankment using Bayesian influence diagrams

1446-1455

Cardoso, Fábio A. / Agopyan, Anne K. / Carbone, Carlos / Pileggi, Rafael G. / John, Vanderley M.

Squeeze flow as a tool for developing optimized gypsum plasters

1349-1353

Xing, Feng / Dong, Biqin / Li, Zongjin

The study of pore structure and its influence on material properties of cement-based piezoelectric ceramic composites

1374-1377

Barrios Padura, A. / Barrios Sevilla, J. / García Navarro, J. / Bustamante, E. Yanes / Crego, E. Parra

Study of the soil consolidation using reinforced jet grouting by geophysical and geotechnical techniques: "La Normal" building complex (Granada)

1389-1400

Medeiros, M. H. F. / Helene, P.

Surface treatment of reinforced concrete in marine environment: Influence on chloride diffusion coefficient and capillary water absorption

1476-1484

Anzeige

Construction and Building Materials - v. 23, n. 3 (März 2009)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - v. 23, n. 3 (März 2009)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.