Construction and Building Materials - Februar 2019

Erschienen:	Februar 2019

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Fabbri, Antonin / Soudani, Lucile / McGregor, Fionn / Morel, Jean-Claude	Analysis of the water absorption test to assess the intrinsic permeability of earthen materials	154-162
Sabziparvar, A. M. / Hosseini, E. / Chiniforush, V. / Korayem, A. H.	Barriers to achieving highly dispersed graphene oxide in cementitious composites: An experimental and computational study	269-278
Moon, Eun-Jin / Choi, Young Cheol	Carbon dioxide fixation via accelerated carbonation of cement-based materials: Potential for construction materials applications	676-687
Ma, Zhiming / Li, Wei / Wu, Huixia / Cao, Chengwei	Chloride permeability of concrete mixed with activity recycled powder obtained from C&D waste	652-663
Matar, Pierre / Assaad, Joseph J.	Concurrent effects of recycled aggregates and polypropylene fibers on workability and key strength properties of self-consolidating concrete	492-500
Alonso, M. C. / Luna, F. J. / Criado, M.	Corrosion behavior of duplex stainless steel reinforcement in ternary binder concrete exposed to natural chloride penetration	385-395
Sabour, Mohammadreza / Dezvareh, Ghorbanali / Bazzazzadeh, Roya	Corrosion prediction using the weight loss model in the sewer pipes made from sulfur and cement concretes and Response Surface Methodology (RSM)	40-49
Sandak, Jakub / Riggio, Mariapaola / Ruggieri, Nicola / Sandak, Anna	Damage progression analysis in a historical timber framed wall under cyclic loads through an image-based tracking method	483-491
Ferretti, Francesca / Ferracuti, Barbara / Mazzotti, Claudio / Savoia, Marco	Destructive and minor destructive tests on masonry buildings: Experimental results and comparison between shear failure criteria	12-29
Kim, Hyeok-Jung / Yoon, Yong-Sik / Yang, Keun-Hyeok / Kwon, Seung-Jun	Durability and purification performance of concrete impregnated with silicate and sprayed with photocatalytic TiO2	106-114
Memon, Shazim Ali / Shah, Syed Farasat Ali / Khushnood, Rao Arsalan / Baloch, Waqas Latif	Durability of sustainable concrete subjected to elevated temperature – A review	435-455
Makoond, Nirvan / Pelà, Luca / Molins, Climent	Dynamic elastic properties of brick masonry constituents	756-770
Xu, Feigao / Wang, Liang / Li, Dan	Effect of adding agar to DAP solutions for protection and consolidation of limestone	279-287
Calandra, Pietro / Caputo, Paolino / De Santo, Maria Penelope / Todaro, Lorena / Turco Liveri, Vincenzo / Oliviero Rossi, Cesare	Effect of additives on the structural organization of asphaltene aggregates in bitumen	288-297
Zaidi, Assra Kadum Aziz Al / Demirel, Bilal / Atis, Cengiz Duran	Effect of different storage methods on thermal and mechanical properties of mortar containing aerogel, fly ash and nano-silica	501-507
Quagliarini, Enrico / Gianangeli, Andrea / D'Orazio, Marco / Gregorini, Benedetta / Osimani, Andrea / Aquilanti, Lucia / Clementi, Francesca	Effect of temperature and relative humidity on algae biofouling on different fired brick surfaces	396-405
Zhang, Hao / Li, Lei / Wang, Wenbing / Liu, Jiaping	Effect of temperature rising inhibitor on expansion behavior of cement paste containing expansive agent	234-243
Caetano, Hugo / Ferreira, Gisleiva / Rodrigues, João Paulo C. / Pimienta, Pierre	Effect of the high temperatures on the microstructure and compressive strength of high strength fibre concretes	717-736
Wang, Yang / Hu, Shaowei / Fan, Xiangqian / Lu, Jun	Effect of water pressure on fracture parameters of concrete	613-623
Patel, Dhirendra / Tiwari, R. P. / Shrivastava, R. / Yadav, R. K.	Effective utilization of waste glass powder as the substitution of cement in making paste and mortar	406-415
Ma, Jian / Yu, Zhuqing / Ni, Chenxin / Shi, Hu / Shen, Xiaodong	Effects of limestone powder on the hydration and microstructure development of calcium sulphoaluminate cement under long-term curing	688-695
Wang, Yingbin / He, Xingyang / Su, Ying / Yang, Jin / Strnadel, Bohumír / Wang, Xiongjue	Efficiency of wet-grinding on the mechano-chemical activation of granulated blast furnace slag (GBFS)	185-193
Asim, Nilofar / Alghoul, Mohammad / Mohammad, Masita / Amin, Mohamad Hassan / Akhtaruzzaman, M. / Amin, Nowshad / Sopian, Kamaruzzaman	Emerging sustainable solutions for depollution: Geopolymers	540-548
Rajhans, Puja / Gupta, Prashant Kumar / Ranjan, Raju Kumar / Panda, Sarat Kumar / Nayak, Sanket	EMV mix design method for preparing sustainable self compacting recycled aggregate concrete subjected to chloride environment	705-716
Zhou, Jie / Zeng, Menglan / Chen, Yuliang / Zhong, Mengwu	Evaluation of cement stabilized recycled concrete aggregates treated with waste oil and asphalt emulsion	143-153
Gao, Lei / Zhang, Feng / Liu, Jiaqi / Lu, Xiaorui / Gao, Huarui	Experimental and numerical study on the interfacial bonding characteristics of FRP-to-concrete joints with mechanical fastening	456-470
Debbarma, Solomon / Ransinchung R. N., G. D. / Singh, Surender	Feasibility of roller compacted concrete pavement containing different fractions of reclaimed asphalt pavement	508-525
Preinstorfer, Philipp / Kromoser, Benjamin / Kollegger, Johann	Flexural behaviour of filigree slab elements made of carbon reinforced UHPC	416-423
Mohammadinia, Alireza / Arulrajah, Arul / Phummiphan, Itthikorn / Horpibulsuk, Suksun / Mirzababaei, Mehdi	Flexural fatigue strength of demolition aggregates stabilized with alkali-activated calcium carbide residue	115-123
Yao, Kai / Li, Na / Chen, Dar-Hao / Wang, Wei	Generalized hyperbolic formula capturing curing period effect on strength and stiffness of cemented clay	63-71
Izarra, Irene / Cubillo, Jose / Serrano, Angel / Rodriguez, Juan Francisco / Carmona, Manuel	A hydrophobic release agent containing SiO2-CH3 submicron-sized particles for waterproofing mortar structures	30-39
Krishnaraj, L. / Ravichandran, P. T.	Impact of chloride grinding aid with modified fly ash using topdown nanotechnology on grinding performance	225-233
Chen, Yuan-Yuan	Impact of climate on mockup for mass concrete incorporating pozzolans	771-782
Liu, Huajie / Bu, Yuhuan / Ma, Rui / Guo, Wenmeng	Improve the practicability of calcium aluminate phosphate cement as well cement: The application of amphoteric ion polymer as retarder	207-213
Page, Jonathan / Khadraoui, Fouzia / Gomina, Moussa / Boutouil, Mohamed	Influence of different surface treatments on the water absorption capacity of flax fibres: Rheology of fresh reinforced-mortars and mechanical properties in the hardened state	424-434
Ye, Huan / Gao, Xiaojian / Zhang, Linchun	Influence of time-dependent rheological properties on distinct-layer casting of self-compacting concrete	214-224
Betrancourt, D. / Chicot, D. / Kossman, S. / Louis, G. / Roudet, F. / Bulteel, D.	Instrumented indentation study of slag in view of a better valorization	349-358
Lu, Youyuan / Xing, Feng / Shi, Guiyun / Liu, Yuqing / Ding, Zhu / Pan, Jinlong / Shao, Hongyu	Interpretation on the influence of chloride ion on early hydration evolution for cementitious materials by a non-contact monitoring method	138-142
Haddad, Madhar / Shrive, Nigel	Investigating the inelastic cyclic behaviour of large-size steel wide-flange section braces	92-105
Lang, Lin / Zhu, Zheming / Zhang, Xianshang / Qiu, Hao / zhou, Changlin	Investigation of crack dynamic parameters and crack arresting technique in concrete under impacts	321-334
Wu, Tao / Yang, Xue / Wei, Hui / Liu, Xi	Mechanical properties and microstructure of lightweight aggregate concrete with and without fibers	526-539
Zhou, Huanting / Wang, Weiyong / Wang, Kang / Xu, Lei	Mechanical properties deterioration of high strength steels after high temperature exposure	664-675
Ma, Linjian / Li, Zeng / Liu, Jiagui / Duan, Liqun / Wu, Jiawen	Mechanical properties of coral concrete subjected to uniaxial dynamic compression	244-255
Hendi, Ali / Mostofinejad, Davood / Sedaghatdoost, Arash / Zohrabi, Mehdi / Naeimi, Navid / Tavakolinia, Ali	Mix design of the green self-consolidating concrete: Incorporating the waste glass powder	369-384
Becerra, Javier / Ortiz, Pilar / Martín, José María / Zaderenko, Ana Paula	Nanolimes doped with quantum dots for stone consolidation assessment	581-593
Huang, Huanghuang / Gao, Xiaojian / Zhang, Ailian	Numerical simulation and visualization of motion and orientation of steel fibers in UHPC under controlling flow condition	624-636
Pina, Juan Carlos / Saavedra Flores, Erick I. / Saavedra, Karin	Numerical study on the elastic buckling of cross-laminated timber walls subject to compression	82-91
Mousavi, Seyed Sina / Guizani, Lotfi / Ouellet-Plamondon, Claudiane M.	On bond-slip response and development length of steel bars in pre-cracked concrete	560-573
Zheng, Dong / Qian, Zhen-dong / Li, Pan / Wang, Lin-Bing	Performance evaluation of high-elasticity asphalt mixture containing inorganic nano-titanium dioxide for applications in high altitude regions	594-600
Tokarský, Jonáš / Martinec, Petr / Mamulová Kutláková, Kateřina / Ovčačíková, Hana / Študentová, Soňa / Ščučka, Jiří	Photoactive and hydrophobic nano-ZnO/poly(alkyl siloxane) coating for the protection of sandstone	549-559
Wang, Chao / Wang, Yang	Physico-chemo-rheological characterization of neat and polymer-modified asphalt binders	471-482
Li, Dawang / Wei, Ren / Li, L. / Guan, Xiaotao / Mi, Xuming	Pitting corrosion of reinforcing steel bars in chloride contaminated concrete	359-368
Jiang, Jun / Lu, Zhongyuan / Li, Jun / Xie, Yue / Luo, Kai / Niu, Yunhui	Preparation and properties of nanopore-rich lightweight cement paste based on swelled bentonite	72-81
Muthusamy, Khairunisa / Mirza, Jahangir / Zamri, Nur Azzimah / Hussin, Mohd Warid / Abdul Majeed, Anwar P. P. / Kusbiantoro, Andri / Albshir Budiea, Ahmed Mokhtar	Properties of high strength palm oil clinker lightweight concrete containing palm oil fuel ash in tropical climate	163-177
Du, Hongjian	Properties of ultra-lightweight cement composites with nano-silica	696-704
Bertelsen, I. M. G. / Ottosen, L. M. / Fischer, G.	Quantitative analysis of the influence of synthetic fibres on plastic shrinkage cracking using digital image correlation	124-137
du Plessis, Anton / Boshoff, William P.	A review of X-ray computed tomography of concrete and asphalt construction materials	637-651
Durán-Herrera, A. / De-León-Esquivel, J. / Bentz, D. P. / Valdez-Tamez, P.	Self-compacting concretes using fly ash and fine limestone powder: Shrinkage and surface electrical resistivity of equivalent mortars	50-62
Chen, Pang / Zheng, Wenzhong / Wang, Ying / Du, Kunmao / Chang, Wei	Strain recovery model for concrete after compressive creep	746-755
Liu, Jintao / Fu, Jiali / Yang, Yang / Gu, Chunping	Study on dispersion, mechanical and microstructure properties of cement paste incorporating graphene sheets	1-11
Bhosale, Aniket / Rasheed, M. Abdur / Prakash, S. Suriya / Raju, Gangadharan	A study on the efficiency of steel vs. synthetic vs. hybrid fibers on fracture behavior of concrete in flexure using acoustic emission	256-268
Zhao, Gaowen / Li, Jingpei / Han, Fei / Shi, Mei / Fan, Henghui	Sulfate-induced degradation of cast-in-situ concrete influenced by magnesium	194-206
Zhu, Huajun / Liang, Guangwei / Xu, Jun / Wu, Qisheng / Du, Jianzhou	Surface-modification of fly ash and its effect on strength and freezing resistance of slag based geopolymer	574-580
Mankel, Christoph / Caggiano, Antonio / Ukrainczyk, Neven / Koenders, Eddie	Thermal energy storage characterization of cement-based systems containing microencapsulated-PCMs	307-320
Saha, Ashish Kumer / Sarker, Prabir Kumar / Golovanevskiy, Vladimir	Thermal properties and residual strength after high temperature exposure of cement mortar using ferronickel slag aggregate	601-612
Liu, Yi-fan / Huang, Jian-kun / Li, Ya-guang / Shi, Zhi-Fei	Trees as large-scale natural metamaterials for low-frequency vibration reduction	737-745
Shi, Minjiao / Ling, Tung-Chai / Gan, Binlin / Guo, Ming-Zhi	Turning concrete waste powder into carbonated artificial aggregates	178-184
Gill, Gourav / Kant Mittal, Ravi	Use of waste tire-chips in shallow footings subjected to eccentric loading-an experimental study	335-348
Kuna, Kranthi / Gottumukkala, Bharath	Viscoelastic characterization of cold recycled bituminous mixtures	298-306

Über diese
Datenseite
IssueID
22348
Veröffentlicht am:
11.12.2018
Geändert am:
26.07.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - Februar 2019

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - Februar 2019

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.